Use of anchor protein modules in fluorescence polarisation aptamer assay for ochratoxin A determination

Polycations as Aptamer-Binding Modulators for Sensitive Fluorescence Anisotropy Assay of Aflatoxin B1

Fluorescence induced by the excitation of a fluorophore with plane-polarized light has a different polarization depending on the size of the fluorophore-containing reagent and the rate of its rotation. Based on this effect, many analytical systems have been implemented in which an analyte contained in a sample and labeled with a fluorophore (usually fluorescein) competes to bind to antibodies. Replacing antibodies in such assays with aptamers, low-cost and stable oligonucleotide receptors, is complicated because binding a fluorophore to them causes a less significant change in the polarization of emissions. This work proposes and characterizes the compounds of the reaction medium that improve analyte binding and reduce the mobility of the aptamer-fluorophore complex, providing a higher analytical signal and a lower detection limit. This study was conducted on aflatoxin B1 (AFB1), a ubiquitous toxicant contaminating foods of plant origins. Eight aptamers specific to AFB1 with the same binding site and different regions stabilizing their structures were compared for affinity, based on which the aptamer with 38 nucleotides in length was selected. The polymers that interact reversibly with oligonucleotides, such as poly-L-lysine and polyethylene glycol, were tested. It was found that they provide the desired reduction in the depolarization of emitted light as well as high concentrations of magnesium cations. In the selected optimal medium, AFB1 detection reached a limit of 1 ng/mL, which was 12 times lower than in the tris buffer commonly used for anti-AFB1 aptamers. The assay time was 30 min. This method is suitable for controlling almond samples according to the maximum permissible levels of their contamination by AFB1. The proposed approach could be applied to improve other aptamer-based analytical systems.

Dual-signal fluorescence aptasensing system for adenosine triphosphate assisting by MoS2 nanosheets

Adenosine triphosphate (ATP) has an irreplaceable role in the maintenance of many physiological processes and biological functions, and can be employed as an indicator of many diseases. In this work, we constructed a simple and sensitive dual-signal fluorescence aptasensing system for ATP detection with berberine as the signal reporter, ATP-aptamer as the recognition unit and MoS2 nanosheets as the signal amplification. In the absence of ATP, berberine can bind to the single-stranded DNA (ssDNA) of ATP-aptamer and selectively assemble on the surface of MoS2 nanosheets, leading to the fluorescence quenching of bererbine based on the fluorescence resonance energy transfer, denoted by "OFF". Accordingly, the fluorescence anisotropy signal is enhanced due to restriction on rotate of the fluorescent probe and denoted as "ON". Conversely, in the presence of ATP, it specifically interacts with ATP-aptamer and switches the free-curled single-stranded of ATP-aptamer to the G-quadruplex structure of ATP-aptamer/ATP/berberine, causing the detachment from the surface of the MoS2 nanosheet. Accordingly, the fluorescence signal was reversed from "OFF" to "ON", and the fluorescence anisotropy signal was turned "ON" to "OFF". The developed aptasensing system achieved a desirable sensitivity of 40.0 nM with fluorescent mode, and of 20.8 nM with fluorescent anisotropic mode. The sensing system has demonstrated high quality detection performance in human serum sample, and obtained the satisfactory recovery results for fluorescent of 93.0-108.5%, fluorescent anisotropic of 96.4-106.7%.

Fluorescent Sensor Based on Magnetic Separation and Strand Displacement Amplification for the Sensitive Detection of Ochratoxin A

Ochratoxin A (OTA) is a common mycotoxin, and it is a significant threat to human health throughout the food chain. In this study, a sensitive and specific fluorescent sensor based on magnetic separation technology combined with chain displacement amplification was developed for fast and easy detection of OTA in food. The designed strand displacement amplification can improve the sensitivity for the detection, and the magnetic nanomaterials can provide a large surface area, thus enhancing the capture efficiency of the target from the sample. Based on those designs, the experimental results showed that the proposed method displayed excellent performance. The linearity range was 0.5-128.0 ng/mL. The detection limit was 0.125 ng/mL; the relative standard deviations were 3.92-7.71%. Additionally, the developed method was satisfactorily applied to determine OTA in wheat, corn, and red wine samples at three spiked levels (1.0, 8.0, and 64.0 ng/mL). The recoveries ranged from 85.45 to 107.8% for wheat flour, 101.34 to 108.35% for corn flour, and 91.15 to 93.80% for red wine, respectively. Compared with high-performance liquid chromatography, the proposed method showed a lower limit of detection and equal recovery. Hence, the designed method is a potential and good detecting tool for OTA residue analysis in complex matrix samples.

Fluorescence-based aptasensors for small molecular food contaminants: From energy transfer to optical polarization

Small molecular food contaminants, such as mycotoxins, pesticide residues and antibiotics, are highly probable to be passively introduced in food at all stages of its processing, including planting, harvest, production, transportation and storage. Owing to the high risks caused by the unknowing intake and accumulation in human, there is an urgent need to develop rapid, sensitive and efficient methods to monitor them. Fluorescence-based aptasensors provide a promising platform for this area owing to its simple operation, high sensitivity, wide application range and economical practicability. In this paper, the common sorts of small molecular contaminants in foods, namely mycotoxins, pesticides, antibiotics, etc, are briefly introduced. Then, we make a comprehensive review, from fluorescence resonance energy transfer (in turn-on, turn-off, and ratiometric mode, as well as energy upconversion) to fluorescence polarization, of the fluorescence-based aptasensors for the determination of these food contaminants reported in the last five years. The principle of signal generation, the advances of each sort of fluorescent aptasensors, as well as their applications are introduced in detail. Additionally, we also discussed the challenges and perspectives of the fluorescent aptasensors for small molecular food contaminants. This work will offer systematic overview and inspiration for amateurs, researchers and developers of fluorescence-based aptasensors for the detection of small molecules.

Recent Progress on Techniques in the Detection of Aflatoxin B1 in Edible Oil: A Mini Review

Contamination of agricultural products and foods by aflatoxin B1 (AFB1) is becoming a serious global problem, and the presence of AFB1 in edible oil is frequent and has become inevitable, especially in underdeveloped countries and regions. As AFB1 results from a possible degradation of aflatoxins and the interaction of the resulting toxic compound with food components, it could cause chronic disease or severe cancers, increasing morbidity and mortality. Therefore, rapid and reliable detection methods are essential for checking AFB1 occurrence in foodstuffs to ensure food safety. Recently, new biosensor technologies have become a research hotspot due to their characteristics of speed and accuracy. This review describes various technologies such as chromatographic and spectroscopic techniques, ELISA techniques, and biosensing techniques, along with their advantages and weaknesses, for AFB1 control in edible oil and provides new insight into AFB1 detection for future work. Although compared with other technologies, biosensor technology involves the cross integration of multiple technologies, such as spectral technology and new nano materials, and has great potential, some challenges regarding their stability, cost, etc., need further studies.

Modulation of Aptamer-Ligand-Binding by Complementary Oligonucleotides: A G-Quadruplex Anti-Ochratoxin A Aptamer Case Study

Short oligonucleotides are widely used for the construction of aptamer-based sensors and logical bioelements to modulate aptamer-ligand binding. However, relationships between the parameters (length, location of the complementary region) of oligonucleotides and their influence on aptamer-ligand interactions remain unclear. Here, we addressed this task by comparing the effects of short complementary oligonucleotides (ssDNAs) on the structure and ligand-binding ability of an aptamer and identifying ssDNAs' features that determine these effects. Within this, the interactions between the OTA-specific G-quadruplex aptamer 1.12.2 (5'-GATCGGGTGTGGGTGGCGTAAAGGGA GCATCGGACA-3') and 21 single-stranded DNA (ssDNA) oligonucleotides complementary to different regions of the aptamer were studied. Two sets of aptamer-ssDNA dissociation constants were obtained in the absence and in the presence of OTA by isothermal calorimetry and fluorescence anisotropy, respectively. In both sets, the binding constants depend on the number of hydrogen bonds formed in the aptamer-ssDNA complex. The ssDNAs' having more than 23 hydrogen bonds with the aptamer have a lower aptamer dissociation constant than for aptamer-OTA interactions. The ssDNAs' having less than 18 hydrogen bonds did not affect the aptamer-OTA affinity. The location of ssDNA's complementary site in the aptamer affeced the kinetics of the interaction and retention of OTA-binding in aptamer-ssDNA complexes. The location of the ssDNA site in the aptamer G-quadruplex led to its unfolding. In the presence of OTA, the unfolding process was longer and takes from 20 to 70 min. The refolding in the presence of OTA was possible and depends on the length and location of the ssDNA's complementary site. The location of the ssDNA site in the tail region led to its rapid displacement and wasn't affecting the G-qaudruplex's integrity. It makes the tail region more perspective for the development of ssDNA-based tools using this aptamer.

Recent advances in fluorescence anisotropy/polarization signal amplification

Fluorescence anisotropy/polarization is an attractive and versatile technique based on molecular rotation in biochemical/biophysical systems. Traditional fluorescence anisotropy/polarization assays showed relatively low sensitivity for molecule detection, because widespread molecular masses are too small to produce detectable changes in fluorescence anisotropy/polarization value. In this review, we discuss in detail how the potential of fluorescence anisotropy/polarization signal approach considerably expanded through the implementation of mass amplification, recycle the target amplification, fluorescence probes structure-switching amplification, resonance energy transfer amplification, and provide perspectives at future directions and applications.

Competitive and noncompetitive fluorescence polarization immunoassays for the detection of benzothiostrobin using FITC-labeled dendrimer-like peptides

Peptides obtained from phage display libraries are valuable reagents for small-molecule immunoassays. However, their application in fluorescence polarization immunoassays (FPIAs) is limited by phage particles. Here, monomer, dendrimer-like dimer, tetramer peptidomimetic and anti-immunocomplex tracers were designed and synthesized using lysine as special scaffolds and spacers to develop competitive and noncompetitive FPIAs for benzothiostrobin. The affinity between tracers and monoclonal antibodies or immunocomplexes increased with the tracer valence. A higher signal-to-noise ratio and sensitivity could be generated in the FPIAs based on tetramer tracers. The sensitivities of competitive (50% inhibitory concentration) and noncompetitive (50% saturation concentration) FPIAs were 19.71 ± 4.65 and 40.43 ± 2.73 ng mL^-1, respectively. The spiked recoveries were 78.3%-105.2% with relative standard deviations (RSDs) of 0.7%-15.4% for the competitive FPIA, while 78.7%-115.3% with RSDs of 0.7%-12.5% for the noncompetitive FPIA. The amounts of benzothiostrobin in rice detected by the FPIAs were consistent with those detected by high performance liquid chromatography.

Antibody- and aptamer-based competitive fluorescence polarization/anisotropy assays for ochratoxin A with tetramethylrhodamine-labeled ochratoxin A

Ochratoxin A (OTA) is one of the mycotoxins that often contaminate a variety of food stuffs, and it is a potential carcinogen for humans. Taking advantage of selective affinity binding and simple, rapid, and sensitive fluorescence polarization (FP)/fluorescence anisotropy (FA) analysis, here, we report two competitive FP/FA assays for OTA using tetramethylrhodamine (TMR)-labeled OTA as a fluorescence tracer and either antibody or aptamer as an affinity ligand to recognize OTA. In the absence of OTA, the TMR-labeled OTA binds with a large-sized affinity ligand, showing a high FA value due to the slow rotation of the affinity complex. When OTA is present, OTA competes with the TMR-labeled OTA tracer in binding limited amount of affinity ligand, causing more free TMR-labeled OTA and a significant FA decrease. We found that the antibody showed a stronger affinity towards TMR-labeled OTA compared to the aptamer. The antibody-based FA assay showed higher signal changes than the aptamer based FA assay due to the larger size of antibody over aptamer. The antibody-based competitive FA assay enabled the detection of 2.4 nM OTA, while the aptamer-based FA assay also achieved a detection limit of 2.4 nM OTA at 10 °C with the help of streptavidin conjugation to increase the molecular size and to improve aptamer affinity. These two competitive FA assays were selective, showing capability for analysis in diluted red wine.

Aptamer-Target-Gold Nanoparticle Conjugates for the Quantification of Fumonisin B1

Fumonisin B1 (FB1), a mycotoxin classified as group 2B hazard, is of high importance due to its abundance and occurrence in varied crops. Conventional methods for detection are sensitive and selective; however, they also convey disadvantages such as long assay times, expensive equipment and instrumentation, complex procedures, sample pretreatment and unfeasibility for on-site analysis. Therefore, there is a need for quick, simple and affordable quantification methods. On that note, aptamers (ssDNA) are a good alternative for designing specific and sensitive biosensing techniques. In this work, the assessment of the performance of two aptamers (40 and 96 nt) on the colorimetric quantification of FB1 was determined by conducting an aptamer-target incubation step, followed by the addition of gold nanoparticles (AuNPs) and NaCl. Although MgCl₂ and Tris-HCl were, respectively, essential for aptamer 96 and 40 nt, the latter was not specific for FB1. Alternatively, the formation of Aptamer (96 nt)-FB1-AuNP conjugates in MgCl₂ exhibited stabilization to NaCl-induced aggregation at increasing FB1 concentrations. The application of asymmetric flow field-flow fractionation (AF4) allowed their size separation and characterization by a multidetection system (UV-VIS, MALS and DLS online), with a reduction in the limit of detection from 0.002 µg/mL to 56 fg/mL.

Fluorescence Polarization-Based Bioassays: New Horizons

Fluorescence polarization holds considerable promise for bioanalytical systems because it allows the detection of selective interactions in real time and a choice of fluorophores, the detection of which the biosample matrix does not influence; thus, their choice simplifies and accelerates the preparation of samples. For decades, these possibilities were successfully applied in fluorescence polarization immunoassays based on differences in the polarization of fluorophore emissions excited by plane-polarized light, whether in a free state or as part of an immune complex. However, the results of recent studies demonstrate the efficacy of fluorescence polarization as a detected signal in many bioanalytical methods. This review summarizes and comparatively characterizes these developments. It considers the integration of fluorescence polarization with the use of alternative receptor molecules and various fluorophores; different schemes for the formation of detectable complexes and the amplification of the signals generated by them. New techniques for the detection of metal ions, nucleic acids, and enzymatic reactions based on fluorescence polarization are also considered.

Aptamer binding assays and molecular interaction studies using fluorescence anisotropy - A review

Binding of nucleic acid aptamers to specific targets and detection with fluorescence anisotropy (FA) or fluorescence polarization (FP) take advantage of the complementary features of aptamers and the fluorescence techniques. We review recent advances in affinity binding assays using aptamers and FA/FP, with an emphasis on studies of molecular interactions and identification of binding sites. Aptamers provide several benefits, including the ease of labelling fluorophores on specific sites, binding-induced changes in aptamer structures, hybridization of the aptamers to complementary sequences, changes in molecular volume upon binding of the aptamer to its target, and adsorption of aptamers onto nanomaterials. Some of these benefits have been utilized for FA/FP assays. Once the aptamer binds to its target, the resulting changes in molecular volume (size), structure, local rotation of the fluorophore, and/or the fluorescence lifetime influence changes to the FA/FP values. Measurements of these fluorescence anisotropy/polarization changes have provided insights into the molecular interactions, such as the binding affinity and the site of binding. Studies of molecular interactions conducted in homogeneous solutions, as well as those with separations, e.g., capillary electrophoresis, have been summarized in this review. Studies on mapping the position of binding in aptamers at the single nucleotide level have demonstrated a unique benefit of the FA/FP techniques and pointed to an exciting direction for future research.

Nanotechnology based strategies for HIV-1 and HTLV-1 retroviruses gene detection

Early detection of retroviruses including human T-cell lymphotropic virus and human immunodeficiency virus in the human body is indispensable to prevent retroviral infection propagation and improve clinical treatment. Until now, diverse techniques have been employed for the early detection of viruses. Traditional methods are time-consuming, resource-intensive, and laborious performing. Therefore, designing and constructing a selective and sensitive diagnosis system to detect serious diseases is highly demanded. Genetic detection with high sensitivity has striking significance for the early detection and remedy of disparate pathogenic diseases. The nucleic acid biosensors are based on the identification of specific DNA sequences in biological samples. Nanotechnology has an important impact on the development of sensitive biosensors. Different kinds of nanomaterials include nanoparticles, nanoclusters, quantum dots, carbon nanotubes, nanocomposites, etc., with different properties have been used to improve the performance of biosensors. Recently, DNA nanobiosensors are developed to provide simple, fast, selective, low-cost, and sensitive detection of infectious diseases. In this paper, the research progresses of nano genosensors for the detection of HIV-1 and HTLV-1 viruses, based on electrochemical, optical, and photoelectrochemical platforms are overviewed.

Fluorescence Anisotropy-Based Signal-Off and Signal-On Aptamer Assays Using Lissamine Rhodamine B as a Label for Ochratoxin A

Ochratoxin A (OTA), a common mycotoxin, has attracted great concern as many foodstuffs can suffer from OTA contamination; OTA causes harmful effects on human and animals. Rapid and sensitive detection of OTA is demanded in many fields for agricultural product quality, food safety, and health. Aptamer fluorescence polarization/anisotropy (FP/FA) assays integrate advantages of nucleic acid aptamers (e.g., easy preparation, high stability, and low cost) and FP/FA analysis (e.g., high sensitivity, rapidity, simplicity, and robustness). Here, we report the preparation of lissamine rhodamine B labeled OTA and developed competitive aptamer fluorescence anisotropy (FA) assays for OTA with signal-off or signal-on responses by using this fluorescently labeled probe. In the signal-off FA assay, the binding between the fluorescent probe and aptamer gave a large FA signal due to molecular volume increase, and the fluorescent probe was displaced from the aptamer in the presence of OTA target, causing FA to decrease. To further enhance the FA change in the signal-off assay, large-sized streptavidin was conjugated on the aptamer, and this assay allowed for a detection limit of 2.5 nM and a more remarkable FA decrease. Furthermore, we found that the fluorescent probe could interact with Tween 20, which caused the fluorescent probe to show a higher FA value than that of the aptamer-fluorescent probe complex. A signal-on FA assay was achieved in the binding buffer containing 0.1% Tween 20, with a detection limit of 10 nM. Signal-off and signal-on FA methods both were selective and enabled detection of OTA spiked in red wine samples, showing capability for target analysis in complex sample matrix.

Investigation of the Small Size of Nanobodies for a Sensitive Fluorescence Polarization Immunoassay for Small Molecules: 3-Phenoxybenzoic Acid, an Exposure Biomarker of Pyrethroid Insecticides as a Model

Limited reports on the use of nanobodies (Nbs) in fluorescence polarization immunoassay (FPIA) aroused us to explore if the small size of Nbs is a drawback for the development of sensitive FPIA to small molecular compounds, particularly since FPIA is a technology strongly dependent on molecular weight. In the present work, three different molecular weight Nbs against 3-phenoxybenzoic acid (3-PBA), an exposure biomarker of pyrethroid insecticides, including bare Nbs (15 kDa), Nbs-Avidin (Nbs-AV, 60 kDa), and Nbs-Alkaline phosphatase (Nbs-AP, 130 kDa) were specifically generated to cover distinct regions on the polarization and molecular weight relationship curve for a fluorescein tracer. In competitive FPIA, similar half-maximal inhibitory concentrations (IC₅₀) of 3-PBA of 16.4, 12.2, and 14.8 ng mL^-1 were obtained for Nbs, Nbs-AV, and Nbs-AP, respectively, indicating that the size of Nbs in the range tested had no significant effect on the sensitivity of the resulting competitive FPIA. An IC₅₀ of 20.2 ng mL^-1 for an anti-3-PBA polyconal antibody based FPIA further demonstrated the performance of Nbs, which was comparable to that of traditional antibodies in FPIA. Spike-recovery studies showed good and reproducible recovery of 3-PBA in urine samples, demonstrating the applicability of Nb-based FPIA. Overall, our results show that Nb-based FPIA achieves sensitivity levels of FPIA based on conventional antibodies and further indicate that Nb absolutely meets the sensitivity requirement of FPIA.

The registration of aptamer-ligand (ochratoxin A) interactions based on ligand fluorescence changes

The fluorescent properties of ligands can change when they bind to specific receptors. Modulated by the transition of the ligand from the free to the bound state, fluorescence makes it possible both to detect this ligand and quantitatively register its binding. We characterized the interaction of ochratoxin A (OTA) with the specific G-quadruplex aptamer through excitation-emission matrix fluorescence spectroscopy. It was shown that the formation of the complex changes the OTA fluorescence spectrum both in the region of the main peak at λ_ex/λ_em 380/430 nm and in the region of peak at λ_ex/λ_em 265/425 nm. At pH 8.5 and OTA concentration of 30 nM, this peak is smaller in intensity than the main peak of fluorescence. The formation of the complex with the aptamer leads to an increase of the fluorescence at λ_ex/λ_em 265/425 nm up to 6.5 times, which makes it up to 4.9 times more intense than fluorescence at 380/430 nm. Fluorescence of the G-quadruplex aptamer (donor) takes part in increasing of the OTA (acceptor) emission at λ_ex/λ_em 265/425 nm due to the resonance energy transfer. The concentration regularities of the modulated fluorescence of OTA at λ_ex/λ_em 265/425 nm have been studied. Their correspondence to the calculations of complexation conducted on the basis of the dissociation constant is shown.

Critical Review: DNA Aptasensors, Are They Ready for Monitoring Organic Pollutants in Natural and Treated Water Sources?

There is a growing need to monitor anthropogenic organic contaminants detected in water sources. DNA aptamers are synthetic single-stranded oligonucleotides, selected to bind to target contaminants with favorable selectivity and sensitivity. These aptamers can be functionalized and are used with a variety of sensing platforms to develop sensors, or aptasensors. In this critical review, we (1) identify the state-of-the-art in DNA aptamer selection, (2) evaluate target and aptamer properties that make for sensitive and selective binding and sensing, (3) determine strengths and weaknesses of alternative sensing platforms, and (4) assess the potential for aptasensors to quantify environmentally relevant concentrations of organic contaminants in water. Among a suite of target and aptamer properties, binding affinity is either directly (e.g., organic carbon partition coefficient) or inversely (e.g., polar surface area) correlated to properties that indicate greater target hydrophobicity results in the strongest binding aptamers, and binding affinity is correlated to aptasensor limits of detection. Electrochemical-based aptasensors show the greatest sensitivity, which is similar to ELISA-based methods. Only a handful of aptasensors can detect organic pollutants at environmentally relevant concentrations, and interference from structurally similar analogs commonly present in natural waters is a yet-to-be overcome challenge. These findings lead to recommendations to improve aptasensor performance.

Development of a Magnetic Nanoparticles-Based Screen-Printed Electrodes (MNPs-SPEs) Biosensor for the Quantification of Ochratoxin A in Cereal and Feed Samples

A rapid and sensitive electrochemical biosensor based on magnetic nanoparticles and screen-printed electrodes (MNPs-SPEs sensor) was developed for the detection of ochratoxin A (OTA) in cereal and feed samples. Different types of magnetic nanoparticles-based ELISA (MNPs-ELISA) were optimized, and the signal detection, as well as sensitivity, was enhanced by the combined use of screen-printed electrodes (SPEs). Under the optimized conditions, the calibration curve of the MNPs-SPEs sensor was y = 0.3372x + 0.8324 (R² = 0.9805). The linear range of detection and the detection limit were 0.01–0.82 ng/mL and 0.007 ng/mL, respectively. In addition, 50% inhibition (IC50) was detectable at 0.10 ng/mL. The limit of detection (LOD) of this MNPs-SPEs sensor in cereal and feed samples was 0.28 μg/kg. The recovery rates in spiked samples were between 78.7% and 113.5%, and the relative standard deviations (RSDs) were 3.6–9.8%, with the coefficient of variation lower than 15%. Parallel analysis of commercial samples (corn, wheat, and feedstuff) showed a good correlation between MNPs-SPEs sensor and liquid chromatography tandem mass spectrometry (LC/MS-MS). This new method provides a rapid, highly sensitive, and less time-consuming method to determine levels of ochratoxin A in cereal and feedstuff samples.

Progressive Relaxation Behavior and Relaxation Dynamics of sPS Gels upon Controlled Heating

Progressive relaxation behavior of syndiotactic polystyrene (sPS) chains in sPS gel was detected in the course of melting via the application of intrinsic fluorescence and fluorescence anisotropy techniques. The melting process included a dissociative process of the network at lower temperature and a relaxation process from helix to worm-like chains at higher temperature. The dynamics of structural relaxation behavior was discovered by intrinsic fluorescence technique, and an abrupt bend emerged at 58 °C on the Arrhenius plot. At temperatures lower than 58 °C, only the dissociation of the helical structure existed and the rate of relaxation from helix to worm-like conformation was negligible. At temperatures higher than 58 °C, the transition from helical chain to worm-like chain was the rate-determining step. The intrinsic fluorescence technique demonstrated its practicability in detecting kinetic processes of sPS/chloroform gel in the course of melting.

Panoply of Fluorescence Polarization/Anisotropy Signaling Mechanisms for Functional Nucleic Acid-Based Sensing Platforms

Fluorescence polarization/anisotropy is a very popular technique that is widely used in homogeneous-phase immunoassays for the small molecule quantification. In the present Feature, we discuss how the potential of this signaling approach considerably expanded during the last 2 decades through the implementation of a myriad of original transducing strategies that use functional nucleic acid recognition elements as a promising alternative to antibodies.

Bioinspired recognition elements for mycotoxin sensors

Mycotoxins are low molecular weight molecules produced as secondary metabolites by filamentous fungi that can be found as natural contaminants in many foods and feeds. These toxins have been shown to have adverse effects on both human and animal health, and are the cause of significant economic losses worldwide. Sensors for mycotoxin analysis have traditionally applied elements of biological origin for the selective recognition purposes. However, since the 1970s there has been an exponential growth in the use of genetically engineered or synthetic biomimetic recognition elements that allow some of the limitations associated with the use of natural receptors for the analyses of these toxins to be circumvented. This review provides an overview of recent advances in the application of bioinspired recognition elements, including recombinant antibodies, peptides, aptamers, and molecularly imprinted polymers, to the development of sensors for mycotoxins based on different transduction elements. Graphical abstract Novel analytical methods based on bioinspired recognition elements, such as recombinant antibodies, peptides, aptamers, and molecularly imprinted polymers, can improve the detection of mycotoxins and provide better tools than their natural counterparts to ensure food safety.

Fluorescence Determination of Omethoate Based on a Dual Strategy for Improving Sensitivity

Omethoate is a frequently used organophosphorus pesticide, and the establishment of a sensitive, selective, and simple method to determine omethoate is very important for food safety. In this paper, a dual strategy was applied to improve the detection sensitivity of omethoate. In the first strategy, graphene quantum dots (GQDs) were doped with nitrogen to increase the fluorescence quantum yield to 30%. By coupling N-GQDs with omethoate aptamer, an N-GQDs-aptamer probe was synthesized. The fluorescence of the N-GQDs-aptamer probe was turned off by graphene oxide (GO), but recovered by omethoate. Based on this principle, the fluorescence method for detecting omethoate was established with a detection limit of 0.041 nM. To further improve the detection sensitivity, the fluorescence polarization analysis method was applied as another strategy based on the polarization signal of GQDs. The detection limit was decreased to 0.029 pM by using the fluorescence polarization method. The detection limits in this paper were lower than those in other reports. The imaging of omethoate on plant leaves showed that the probe could be used for visual semiquantitative determination of omethoate.