Forensic Radiology: A Primer

Organ procurement in forensic deaths: A retrospective analysis of the Italian context with a focus on the Puglia Region virtuous experience

Organ transplantation is one the most important contributions of modern medicine to society since it provides a unique therapy for terminal organ failure. However, the development of this therapeutic approach is hindered by the limited organ supply. In Italy, organ procurement requires a multidisciplinary medical-surgical approach in which legal medical doctors (LMDs) are generally tasked with ascertaining the reality of death. Sometimes, a medico-legal report is required when the deceased's family deny their consent to the organs and tissues removal from a potential deceased donor. LMDs can also be appointed by law to carry out post-mortem examinations of potential deceased donors. In these cases, the public prosecutors' interest in preserving the corpse integrity for forensic purposes seems to conflict with the ethical-humanitarian interest in promoting, at most, the opportunity to donate; however, a LMD can act as a mediator and allow both goals. This paper aims to illustrate the Apulia Region experience in reconciling the justice interests with those of a culture promoting deceased organ and tissue donation. It has been pursued by analyzing the virtuous regional organ procurement trend in forensic deaths before and after a crucial 2015 initiative, comparing the results with the national ones, and contextualizing them in the relevant literature to show systemic strengths and weaknesses and inform future Italian policy development.

Organisational barriers and facilitators to the implementation of best practices within paediatric forensic radiographic practice - A scoping review

INTRODUCTION

Implementation and application of evidence-based practice through legislation, international and national guidelines and local protocols is integral to the successful undertaking of forensic radiographic practice, because of its medico-legal role. This research aims to evaluate those organisational barriers and facilitators to its effective implementation.

METHODS

This scoping review was undertaken according to the JBI updated guidelines using the PCC mnemonic. A systematic search of 10 databases was undertaken to identify literature addressing the research question relating to this aspect of forensic radiography practice. Handsearching and snowballing were also included to enhance this search strategy. The search focussed on forensic imaging of paediatrics, the living and deceased.

RESULTS

Of the 301 papers initially selected, 9 articles were identified as eligible for inclusion, encompassing an international perspective. Through Inductive Content Analysis, 5 conceptual categories were developed: ineffective organisational governance, education translation, system brakes, default practice, and value-based judgement.

CONCLUSION

The results indicate that there are many complex and multifactorial organisational issues impacting upon effective implementation of best practices within paediatric forensic imaging. There is a need to address these issues, before attempting strategies for future implementation. It is essential to recognise that there can be no one-size-fits approach, but rather tailored strategies are required recognising individual needs within the multi-disciplinary scope of forensic radiographic practice.

IMPLICATIONS FOR PRACTICE

Failure to recognise and address the identified issues impacting upon effective implementation, may have significant implications on the processes and individuals involved in the forensic imaging acquisition pathway. Successful addressing of these issues may enable the professionals involved in organisational governance to create a more conducive and receptive environment for best-practice implementation.

Post-mortem CT in the investigation of homicides

AIM

To investigate the reliability of post-mortem computed tomography (PMCT) in a case series of homicides involving blunt-force, sharp-force, and ballistic trauma.

MATERIALS AND METHODS

The study investigates 16 homicide cases that underwent PMCT before autopsy. Two radiologists assessed the PMCT examinations and the data were compared to the forensic pathology findings. Data were organised in broad categories: foreign bodies, external injuries, soft-tissue and organ injuries, fractures, air in cavities, fluid collections, random pathology, and wound track. Findings were organised by systems: head and neck, thorax, abdomen and pelvis, extremities. Cohen's kappa statistics were used to assess observer agreement.

RESULTS

Six gunshot-related homicides (37.5%), seven sharp-force-related homicides (43.75%), two blunt-force-related deaths (12.5%), and one homicide due to mechanical asphyxia (1.25%) were analysed. A total of 64 fractures were reported by the pathologists, 67 by radiologist 1 and 68 by radiologist 2. Agreement was deemed substantial in all cases. Pathologists failed to report gas in cavities while radiologists underreported superficial injuries.

CONCLUSION

An overall observation was that less accurate findings were produced by the blinded radiologist in comparison to the non-blinded one. The extremeness of homicides obscured the interpretation of PMCT leading to the observed discrepancies. The combination of PMCT and autopsies is deemed optimal when investigating homicidal events.

X-ray analytic microscopy with CT-guided sample extraction to analyze potential projectile fragments in a dead serow

In forensic pathology, it is important to detect and recover as evidence residual metal particles and projectiles when evaluating potential gunshot wounds. This process can be challenging when the bullets are fragmented. This report presents our experience using multiple modalities to analyze the wound of an illegally killed Japanese serow (Capricornis crispus) found in a mountainous region without its head and hind limbs. We performed postmortem computed tomography (PMCT) and necropsy that showed a distant-range gunshot wound of the neck likely created by a centerfire rifle. A postmortem cut through the neck and absent head precluded a complete evaluation. To determine the composition of the metal-like fragments in the neck, sampling and metal analysis were performed in two ways. Samples extracted from the exposed wound surface without CT guidance were analyzed directly using inductively coupled plasma mass spectrometry (ICP-MS). Samples from the bone, muscles, and cervical cord extracted under CT guidance were analyzed using x-ray analytic microscopy (XGT-9000, HORIBA, Kyoto, Japan). In wound surface samples, silicon and iron were detected as the main components on ICP-MS, suggesting that the materials were gravel. The samples taken under CT guidance and analyzed with XGT-9000 revealed that the high-density CT areas were mainly composed of lead. Combining CT-guided sample extraction and XGT-9000 can be useful for retrieving true projectile fragments and avoiding the confusion created by erroneously sampling non-projectile surface materials.

Risk assessment tools for osteoporosis and fractures in 2022

Osteoporosis is one of the frequently encountered non-communicable diseases in the world today. Several hundred million people have osteoporosis, with many more at risk. The clinical feature is a fragility fracture (FF), which results in major reductions in the quality and quantity of life, coupled with a huge financial burden. In recognition of the growing importance, the World Health Organisation established a working group 30 years ago tasked with providing a comprehensive report to understand and assess the risk of osteoporosis in postmenopausal women. Dual-energy X-ray absorptiometry (DXA) is the most widely endorsed technology for assessing the risk of fracture or diagnosing osteoporosis before a fracture occurs, but others are available. In clinical practice, important distinctions are essential to optimise the use of risk assessments. Traditional tools lack specificity and were designed for populations to identify groups at higher risk using a 'one-size-fits-all' approach. Much has changed, though the purpose of risk assessment tools remains the same. In 2022, many tools are available to aid the identification of those most at risk, either likely to have osteoporosis or suffer the clinical consequence. Modern technology, enhanced imaging, proteomics, machine learning, artificial intelligence, and big data science will greatly advance a more personalised risk assessment into the future. Clinicians today need to understand not only which tool is most effective and efficient for use in their practice, but also which tool to use for which patient and for what purpose. A greater understanding of the process of risk assessment, deciding who should be screened, and how to assess fracture risk and prognosis in older men and women more comprehensively will greatly reduce the burden of osteoporosis for patients, society, and healthcare systems worldwide. In this paper, we review the current status of risk assessment, screening and best practice for osteoporosis, summarise areas of uncertainty, and make some suggestions for future developments, including a more personalised approach for individuals.

Utility of micro-CT for dating post-cranial fractures of known post-traumatic ages through 3D measurements of the trabecular inner morphology

Fracture dating is an issue at the forefront of forensic sciences. While dating fracture is crucial to understanding and verifying the chronology of events in cases of abuse and violent death, its application is the subject of considerable discussion in the scientific community, filled with limitations and difficulties. Current methods for fracture dating are mainly based on a qualitative assessment through macroscopy, microscopy, and imaging and subject to variations depending on the experience of the observer. In this paper, we investigated the potential of quantifiable micro-CT analysis for fracture dating. Five histomorphometric parameters commonly used for the study of the 3D bone trabecular microarchitecture with micro-CT were calculated based on nine fractures of known post-traumatic ages, including the degree of anisotropy, connectivity density, bone volume fraction, trabecular thickness, and trabecular separation. As a result, trends in the evolution of the microarchitecture of the bone relative to age of the callus could be identified, in particular concerning anisotropy, trabecular separation and connectivity density, consistent with the healing bone process. The findings obtained in this pilot study encourage further research in quantifiable parameters of the bone microarchitecture as they could represent useful features for the construction of objective models for fracture dating.

Temporal changes in extra-axial brain hematoma's signal intensity in magnetic resonance images of trauma patients: A preliminary, technical study

INTRODUCTION

Dating the exact or estimated time of trauma is an important issue facing forensic medicine. Several clinical and radiological methods were used to achieve this purpose. In the recent study, we aimed to track the changes in the signal intensity of the extra-axial brain hematoma using magnetic resonance imaging (MRI) conventional sequences as well as diffusion-weighted imaging (DWI) and the apparent diffusion coefficient (ADC).

MATERIALS AND METHODS

Considering inclusion and exclusion criteria, all patients with blunt head trauma were involved. After proper management., stabilization, and resuscitation, the participants were assessed using conventional sequences of MRI and DWI twenty-four hours, forty-eight hours, and three weeks after the injury. Temporal changes of signal intensity were compared by Wilcoxon ranged test.

RESULTS

Sixteen patients sustaining blunt head trauma were included in this study. The study showed that during the time, diffusion restriction could be seen in an extraaxial hematoma. At the first 24 hours, the signal of hematoma was void in 87.5% of DWI and 100% of ADC. On the second day, they were hypo-signal in 75% of DWI and 100% 0f ADCs, and after three weeks, 100% of cases were hyper-signal in DWI and hypo-signal ADCs.

CONCLUSION

This preliminary study has shown that the DWI can be used to detect and track the extra-axial hematoma. The signal intensity was void during the first twentyfour hours, although it became hypo-signal after 48 hours. Of note, the diffusion restriction is noted after three weeks.

Advances in forensic diagnosis of electric shock death in the absence of typical electrical marks

Electrical injury is a relatively uncommon but potentially devastating form of multi-system injury with high morbidity and mortality. In common electric injury cases, it is usually difficult to find characteristic changes of electric injury in major organs by using routine histopathological test methods unless there are landmark traces of electric injury, known as electric marks. How to determine electric shock death, especially in the absence of typical electrical marks on the body surface in some cases (which account for about two-thirds of electric injury cases), remains a challenging problem in forensic practice. Our summary shows that many current related studies have focused their efforts to find characteristic histopathological changes in major organs of the body caused by electric injury. Based on the results obtained through comparison of the literature, we find that it may be more urgent and important to find the optimal autopsy or sampling sites in cases with no typical electric marks, knowing that these sites may often reflect the most significant histopathological changes of electric injury, for instance anatomy and sampling of the anterior wrist and the medial malleolus in cases involving the hand-to-foot electric circuit pathway. In this article, we make a summary of advances in identification methods of electric injury, hoping that it could provide some new insights for further research in this field.

[Postmortem sonography helpful in death of unknown origin]

Postmortem imaging has been used primarily in forensic medicine since 1895. Conventional x‑ray, computed tomography (CT), and magnetic resonance imaging (MRI) are used. In studies, sonography is not considered to be of particular value, especially because of postmortem gas formation in adults. We report three cases in which postmortem sonography within three hours of death allowed clarification of a previously unclear cause of death.

Pitfalls of Computed Tomography 3D Reconstruction Models in Cranial Nonmetric Analysis

Many studies in the literature have highlighted the utility of virtual 3D databanks as a substitute for real skeletal collections and the important application of radiological records in personal identification. However, none have investigated the accuracy of virtual material compared to skeletal remains in nonmetric variant analysis using 3D models. The present study investigates the accuracy of 20 computed tomography (CT) 3D reconstruction models compared to the real crania, focusing on the quality of the reproduction of the real crania and the possibility to detect 29 dental/cranial morphological variations in 3D images. An interobserver analysis was performed to evaluate trait identification, number, position, and shape. Results demonstrate a false bone loss in 3D models in some cranial regions, specifically the maxillary and occipital bones in 85% and 20% of the samples. Additional analyses revealed several difficulties in the detection of cranial nonmetric traits in 3D models, resulting in incorrect identification in circa 70% of the traits. In particular, pitfalls included the detection of erroneous position, error in presence/absence rates, in number, and in shape. The lowest percentages of correct evaluations were found in traits localized in the lateral side of the cranium and for the infraorbital suture, mastoid foramen, and crenulation. The present study highlights important pitfalls in CT scan when compared with the real crania for nonmetric analysis. This may have crucial consequences in cases where 3D databanks are used as a source of reference population data for nonmetric traits and pathologies and during bone-CT comparisons for identification purposes.

Heavy metal in radiology: how to reliably differentiate between lodged copper and lead bullets using CT numbers

BACKGROUND

The in situ classification of bullets is of interest in forensic investigations when the bullet cannot be removed. Although computed tomography (CT) is usually performed on shooting victims, visual assessment, or caliber measurements using CT can be challenging or infeasible if the bullets are deformed or fragmented. Independent from the bullet's intactness, x-ray attenuation values (CT numbers) may provide information regarding the material of the bullet.

METHODS

Ethical approval was not required (animal cadavers) or waived by the ethics committee (decedents). Copper and lead bullets were fired into animal cadavers, which then underwent CT scanning at four energy levels (80, 100, 120, and 140 kVp). CT numbers were measured within regions of interest (ROIs). In addition to comparing CT numbers, the dual-energy index (DEI), representing the ratio between the CT numbers of two energy levels, was calculated. The most appropriate method was applied for decedents with fatal gunshot wounds.

RESULTS

CT numbers demonstrated no significant difference between copper and lead bullets, and false classifications can easily occur. DEI calculations revealed significant differences between the two groups of bullets. The 120/140 DEIs calculated from the maximum CT numbers obtained from ROIs at the edge of copper versus lead bullets presented a significant difference (p = 0.002) and a gap between the CT numbers of copper and lead bullets and was successfully applied for the decedents.

CONCLUSIONS

This study presents a viable method for distinguishing copper and lead bullets in situ via CT and highlights the potential pitfalls of incorrect classifications.