Physicochemical degradation studies of calcium phosphate glass ceramic in the CaO-P2O5-MgO-TiO2 system

Osteoconductive and electroactive carbon nanofibers/hydroxyapatite nanocomposite tailored for bone tissue engineering: in vitro and in vivo studies

In this study, we aimed to fabricate osteoconductive electrospun carbon nanofibers (CNFs) decorated with hydroxyapatite (HA) crystal to be used as the bone tissue engineering scaffold in the animal model. CNFs were derived from electrospun polyacrylonitrile (PAN) nanofibers via heat treatment and the carbonized nanofibers were mineralized by a biomimetic approach. The growth of HA crystals was confirmed using XRD, FTIR, and EDAX analysis techniques. The mineralization process turned the hydrophobic CNFs (WCA: 133.5° ± 0.6°) to hydrophilic CNFs/HA nanocomposite (WCA 15.3° ± 1°). The in vitro assessments revealed that the fabricated 24M-CNFs nanocomposite was biocompatible. The osteoconductive characteristics of CNFs/HA nanocomposite promoted in vivo bone formation in the rat’s femur defect site, significantly, observed by computed tomography (CT) scan images and histological evaluation. Moreover, the histomorphometric analysis showed the highest new bone formation (61.3 ± 4.2%) in the M-CNFs treated group, which was significantly higher than the negative control group (the defect without treatment) (< 0.05). To sum up, the results implied that the fabricated CNFs/HA nanocomposite could be considered as the promising bone healing material.

Role of glass structure in defining the chemical dissolution behavior, bioactivity and antioxidant properties of zinc and strontium co-doped alkali-free phosphosilicate glasses

We investigated the structure-property relationships in a series of alkali-free phosphosilicate glass compositions co-doped with Zn(2+) and Sr(2+). The emphasis was laid on understanding the structural role of Sr(2+) and Zn(2+) co-doping on the chemical dissolution behavior of glasses and its impact on their in vitro bioactivity. The structure of glasses was studied using molecular dynamics simulations in combination with solid state nuclear magnetic resonance spectroscopy. The relevant structural properties are then linked to the observed degradation behavior, in vitro bioactivity, osteoblast proliferation and oxidative stress levels. The apatite-forming ability of glasses has been investigated by X-ray diffraction, infrared spectroscopy and scanning electron microscopy-energy-dispersive spectroscopy after immersion of glass powders/bulk in simulated body fluid (SBF) for time durations varying between 1h and 14 days, while their chemical degradation has been studied in Tris-HCl in accordance with ISO 10993-14. All the glasses exhibit hydroxyapatite formation on their surface within 1-3h of their immersion in SBF. The cellular responses were observed in vitro on bulk glass samples using human osteosarcoma MG63 cell line. The dose-dependent cytoprotective effect of glasses with respect to the concentration of zinc and strontium released from the glasses is also discussed.

Preliminary evaluation of therapeutic ion release from Sr-doped zinc-silicate glass ceramics

Bioactive and degradable porous bioceramics play an important role in many clinical situations. Porosity is essential to the performance of a material that is proposed to be used as an implantable osseous scaffold. Scaffolds provide a three dimensional support and template to osseous integration and vascularization. Combining the porosity of a scaffold with the ability of the scaffold material to deliver therapeutic ions to the site of implantation goes some way towards developing an ideal bone graft. A series of strontium-doped zinc silicate (Ca-Sr-Na-Zn-Si) glass ceramics scaffoldswere developed, whose porosity was measured to be between 93% and 96%, which is advantageous in terms of osseous integration and vascularization. The levels of Zn2+ and Sr2+ detected as a result of degradation of the crystalline phases were found to be 1.4–600 parts per million (ppm) and 0–583 ppm, respectively. The levels detected correlate well with the levels of Sr2+ and Zn2+ions typically associated with clinical benefits, including antibacterial efficacy, osteoblastic differentiation and impaired osteoclastic resorption.

The effect of composition on ion release from Ca-Sr-Na-Zn-Si glass bone grafts

Controlled delivery of active ions from biomaterials has become critical in bone regeneration. Some silica-based materials, in particular bioactive glasses, have received much attention due to the ability of their dissolution products to promote cell proliferation, cell differentiation and activate gene expression. However, many of these materials offer little therapeutic potential for diseased tissue. Incorporating trace elements, such as zinc and strontium, known to have beneficial and therapeutic effects on bone may provide a more viable bone graft option for those suffering from metabolic bone diseases such as osteoporosis. Rational compositional design may also allow for controlled release of these active ions at desirable dose levels in order to enhance therapeutic efficacy. In this study, six differing compositions of calcium-strontium-sodium-zinc-silicate (Ca-Sr-Na-Zn-Si) glass bone grafts were immersed in pH 7.4 and pH 3 solutions to study the effect of glass composition on zinc and strontium release in a normal and extreme physiological environment. The zinc release levels over 30 days for all zinc-containing glasses in the pH 7.4 solution were 3.0-7.65 ppm. In the more acidic pH 3 environment, the zinc levels were higher (89-750 ppm) than those reported to be beneficial and may produce cytotoxic or negative effects on bone tissue. Strontium levels released from all examined glasses in both pH environments similarly fell within apparent beneficial ranges--7.5-3500 ppm. Glass compositions with identical SrO content but lower ZnO:Na(2)O ratios, showed higher levels of Sr(2+) release. Whereas, zinc release from zinc-containing glasses appeared related to ZnO compositional content. Sustainable strontium and zinc release was seen in the pH 7.4 environment up to day 7. These results indicate that the examined Ca-Sr-Na-Zn-Si glass compositions show good potential as therapeutic bone grafts, and that the graft composition can be tailored to allow therapeutic levels of ions to be released.

From natural bone grafts to tissue engineering therapeutics: Brainstorming on pharmaceutical formulative requirements and challenges

Tissue engineering is an emerging multidisciplinary field of investigation focused on the regeneration of diseased or injured tissues through the delivery of appropriate molecular and mechanical signals. Therefore, bone tissue engineering covers all the attempts to reestablish a normal physiology or to speed up healing of bone in all musculoskeletal disorders and injuries that are lashing modern societies. This article attempts to give a pharmaceutical perspective on the production of engineered man-made bone grafts that are described as implantable tissue engineering therapeutics, and to highlight the importance of understanding bone composition and structure, as well as osteogenesis and bone healing processes, to improve the design and development of such implants. In addition, special emphasis is given to pharmaceutical aspects that are frequently minimized, but that, instead, may be useful for formulation developments and in vitro/in vivo correlations.