Capability of human umbilical cord blood progenitor-derived endothelial cells to form an efficient lining on a polyester vascular graft in vitro

The Influence of Textile Structure Characteristics on the Performance of Artificial Blood Vessels

Cardiovascular disease is a major threat to human health worldwide, and vascular transplantation surgery is a treatment method for this disease. Often, autologous blood vessels cannot meet the needs of surgery. However, allogeneic blood vessels have limited availability or may cause rejection reactions. Therefore, the development of biocompatible artificial blood vessels is needed to solve the problem of donor shortage. Tubular fabrics prepared by textile structures have flexible compliance, which cannot be matched by other structural blood vessels. Therefore, biomedical artificial blood vessels have been widely studied in recent decades up to the present. This article focuses on reviewing four textile methods used, at present, in the manufacture of artificial blood vessels: knitting, weaving, braiding, and electrospinning. The article mainly introduces the particular effects of different structural characteristics possessed by various textile methods on the production of artificial blood vessels, such as compliance, mechanical properties, and pore size. It was concluded that woven blood vessels possess superior mechanical properties and dimensional stability, while the knitted fabrication method facilitates excellent compliance, elasticity, and porosity of blood vessels. Additionally, the study prominently showcases the ease of rebound and compression of braided tubes, as well as the significant biological benefits of electrospinning. Moreover, moderate porosity and good mechanical strength can be achieved by changing the original structural parameters; increasing the floating warp, enlarging the braiding angle, and reducing the fiber fineness and diameter can achieve greater compliance. Furthermore, physical, chemical, or biological methods can be used to further improve the biocompatibility, antibacterial, anti-inflammatory, and endothelialization of blood vessels, thereby improving their functionality. The aim is to provide some guidance for the further development of artificial blood vessels.

Shear stress: An essential driver of endothelial progenitor cells

The blood flow through vessels produces a tangential, or shear, stress sensed by their innermost layer (i.e., endothelium) and representing a major hemodynamic force. In humans, endothelial repair and blood vessel formation are mainly performed by circulating endothelial progenitor cells (EPCs) characterized by a considerable expression of vascular endothelial growth factor receptor 2 (VEGFR2), CD34, and CD133, pronounced tube formation activity in vitro, and strong reendothelialization or neovascularization capacity in vivo. EPCs have been proposed as a promising agent to induce reendothelialization of injured arteries, neovascularization of ischemic tissues, and endothelialization or vascularization of bioartificial constructs. A number of preconditioning approaches have been suggested to improve the regenerative potential of EPCs, including the use of biophysical stimuli such as shear stress. However, in spite of well-defined influence of shear stress on mature endothelial cells (ECs), articles summarizing how it affects EPCs are lacking. Here we discuss the impact of shear stress on homing, paracrine effects, and differentiation of EPCs. Unidirectional laminar shear stress significantly promotes homing of circulating EPCs to endothelial injury sites, induces anti-thrombotic and anti-atherosclerotic phenotype of EPCs, increases their capability to form capillary-like tubes in vitro, and enhances differentiation of EPCs into mature ECs in a dose-dependent manner. These effects are mediated by VEGFR2, Tie2, Notch, and β1/3 integrin signaling and can be abrogated by means of complementary siRNA/shRNA or selective pharmacological inhibitors of the respective proteins. Although the testing of sheared EPCs for vascular tissue engineering or regenerative medicine applications is still an unaccomplished task, favorable effects of unidirectional laminar shear stress on EPCs suggest its usefulness for their preconditioning.

In Vitro Endothelialization of Biodegradable Vascular Grafts Via Endothelial Progenitor Cell Seeding and Maturation in a Tubular Perfusion System Bioreactor

A critical challenge to the success of biodegradable vascular grafts is the establishment of a healthy endothelium. To establish this monolayer of endothelial cells (ECs), a variety of techniques have been developed, including cell seeding. Vascular grafts may be seeded with relevant cell types and allowed to mature before implantation. Due to the low proliferative ability of adult ECs and issues with donor site morbidity, there has been increasing interest in using endothelial progenitor cells (EPCs) for vascular healing procedures. In this work, we combined the proliferative and differentiation capabilities of a commercial cell line of early EPCs with an established bioreactor system to support the maturation of cell-seeded vascular grafts. All components of the vascular graft and bioreactor setup are commercially available and allow for complete customization of the scaffold and culturing system. This bioreactor setup enables the control of flow through the graft, imparting fluid shear stress on EPCs and affecting cellular proliferation and differentiation. Grafts cultured with EPCs in the bioreactor system demonstrated greatly increased cell populations and neotissue formation compared with grafts seeded and cultured in a static system. Increased expression of markers for mature endothelial tissues were also observed in bioreactor-cultured EPC-seeded grafts. These findings suggest the distinct advantages of a customizable bioreactor setup for the proliferation and maturation of EPCs. Such a strategy may be beneficial for utilizing EPCs in vascular tissue engineering applications.

Mechanotransduction in small intestinal submucosa scaffolds: fabrication parameters potentially modulate the shear-induced expression of PECAM-1 and eNOS

In small intestinal submucosa (SIS) scaffolds for functional tissue engineering, the impact of scaffold fabrication parameters on cellular response and tissue regeneration may relate to the mechanotransductory properties of the final arrangement of collagen fibres. We previously proved that two fabrication parameters, (a) preservation (P) or removal (R) of a dense collagen layer present in SIS, and (b) SIS in a final dehydrated (D) or hydrated (H) state, have an effect on the micromechanical environment of SIS. In a continuation of our studies, we herein hypothesized that these fabrication parameters also modulate early mechanotransduction in cells populating the scaffold. Mechanotransduction was investigated by seeding human umbilical vein endothelial cells (HUVECs) on scaffolds, exposing them to pulsatile shear stress (12 ± 4 dyne/cm² ) for 1 h (n = 5) in a cone-and-plate shear system, and evaluating the expression of the mechanosensitive genes Pecam1 and Enos by immunofluorescence and qPCR. Expression of mechanosensitive genes was highest in PD grafts, followed by PH and RH grafts. The RD group had similar expression to that of unsheared control cells, suggesting that the RD combination potentially reduced mechanotransduction of shear to cells. We concluded that the two fabrication parameters studied, which modify SIS micromechanics, also potentially modulated the early shear-induced expression of mechanosensitive genes in seeded HUVECs. Our findings suggest that fabrication parameters influence the outcome of SIS as a therapeutic scaffold. Copyright © 2015 John Wiley & Sons, Ltd.

Labeling and qualification of endothelial progenitor cells for tracking in tissue engineering: An in vitro study

PURPOSE

In order to track location and distribution of endothelial cells (ECs) within scaffolds in vitro, we chose lentiPGK-TdTomato transduction of human endothelial progenitor cells (EPCs) isolated and differentiated from cord blood. Because transduction could have a functional impact on cell behavior, we checked different parameters for qualification of labeled- EPCs as well as their use for potential applications in the context of vascular and bone tissue engineering.

METHODS

After isolation and expansion, EPCs were classically characterized then transduced with the lentiviral vector containing the TdTomato protein gene under the control of the phosphoglycerate kinase (PGK) promoter. Conventional karyotyping, differentiation capacity, viability, proliferation assays were performed with labeled and unlabeled EPCs. Scaffolds and co-cultures were explored with labeled EPCs, in static or shear stress conditions.

RESULTS

Our results show that cell labeling did not affect cell adhesion nor induce cell death. Cell labeling did not induce more chromosomal aberrations. Phenotypical characterization was not affected. In the context of tissue engineering applications, labeled EPCs maintained their ability to line 2D or 3D scaffolds, withstand physiological arterial shear stress, and form tubular networks in co-cultures with human osteoblast progenitor cells.

CONCLUSIONS

It is possible to label human EPCs with TdTomato without affecting their behavior by the transduction procedure. This creates an important tool for numerous applications. Our results provide a qualification of labeled EPCs in comparison with unlabeled ones for vascular and bone tissue engineering.

Attachment of human endothelial cells to polyester vascular grafts: pre-coating with adhesive protein assemblies and resistance to short-term shear stress

Cardiovascular prosthetic bypass grafts do not endothelialize spontaneously in humans, and so they pose a thrombotic risk. Seeding with cells improves their performance, particularly in small-caliber applications. Knitted tubular polyethylene-terephthalate (PET) vascular prostheses (6 mm) with commercial type I collagen (PET/Co) were modified in the lumen by the adsorption of laminin (LM), by coating with a fibrin network (Fb) or a combination of Fb and fibronectin (Fb/FN). Primary human saphenous vein endothelial cells were seeded (1.50 × 10(5)/cm2), cultured for 72 h and exposed to laminar shear stress 15 dyn/cm(2) for 40 and 120 min. The control static grafts were excluded from shearing. The cell adherence after 4 h on PET/Co, PET/Co +LM, PET/Co +Fb and PET/Co +Fb/FN was 22%, 30%, 19% and 27% of seeding, respectively. Compared to the static grafts, the cell density on PET/Co and PET/Co +LM dropped to 61% and 50%, respectively, after 120 min of flow. The cells on PET/Co +Fb and PET/Co +Fb/FN did not show any detachment during 2 h of shear stress. Pre-coating the clinically-used PET/Co vascular prosthesis with LM or Fb/FN adhesive protein assemblies promotes the adherence of endothelium. Cell retention under flow is improved particularly on fibrin-containing (Fb and Fb/FN) surfaces.

Preparation and evaluation of bicomponent and homogeneous polyester silk small diameter arterial prostheses

The development of a small diameter (≤5 mm) arterial prosthesis requires the appropriate selection of materials, structure and fabrication method so as to provide adequate mechanical properties, superior biocompatibility and precise control over the diameter. In this study, 100% polyester, 100% silk fibroin and a combination of both yarns were woven into seamless tubular prototype prostheses with different basic weaves. After degumming/scouring they met a target inner diameter of 3.9±0.3 mm which demonstrates that weaving is a precise way to manufacture small caliber arterial prostheses. In conclusion, the bicomponent polyester/silk woven samples had superior mechanical properties and improved cytocompatibility compared to commercial ePTFE devices.

Whatever their differentiation status, human progenitor derived - or mature - endothelial cells induce osteoblastic differentiation of bone marrow stromal cells

Association of the bone-forming osteoblasts (OBs) and vascular endothelial cells (ECs) into a biomaterial composite provides a live bone graft substitute that can repair the bone defect when implanted. An intimate functional relationship exists between these cell types. This communication is crucial to the coordinated cell behaviour necessary for bone development and remodelling. Previous studies have shown that direct co-culture of primary human osteoprogenitors (HOPs) with primary human umbilical vein endothelial cells (HUVECs) stimulates HOPs differentiation and induces tubular-like networks. The present work aims to test the use of human bone marrow stromal cells (HBMSCs) co-cultured with human endothelial progenitor cells in order to assess whether progenitor-derived ECs (PDECs) could support osteoblastic differentiation as mature ECs do. Indeed, data generated from the literature by different laboratories considering these co-culture systems appear difficult to compare. Monocultures of HUVECs, HOPs, HBMSCs (in a non-orientated lineage), PDECs (from cord blood) were used as controls and four combinations of co-cultures were undertaken: HBMSCs-PDECs, HBMSCs-HUVECs, HOPs-PDECs, HOPs-HUVECs with ECs (mature or progenitor) for 6 h to 7 days. At the end of the chosen co-culture time, intracellular alkaline phosphatase (ALP) activity was detected in HOPs and HBMSCs and quantified in cell extracts. Quantitative real-time polymerase chain reaction (qPCR) of ALP was performed over time and vascular endothelial growth factor (VEGF) was measured. After 21 days, calcium deposition was observed, comparing mono- and co-cultures. We confirm that ECs induce osteoblastic differentiation of mesenchymal stem cells in vitro. Moreover, HUVECs can be replaced by PDECs, the latter being of great interest in tissue engineering.

Human progenitor-derived endothelial cells vs. venous endothelial cells for vascular tissue engineering: an in vitro study

The isolation of endothelial progenitor cells from human peripheral blood generates a great hope in vascular tissue engineering because of particular benefit when compared with mature endothelial cells. We explored the capability of progenitor-derived endothelial cells (PDECs) to line fibrin and collagen scaffolds in comparison with human saphenous and umbilical cord vein endothelial cells (HSVECs and HUVECs): (a) in a static situation, allowing definition of the optimal cell culture conditions with different media and cell-seeding densities to check cell behaviour; (b) under shear stress conditions (flow chambers or tubular vascular constructs), allowing investigation of cell response and mRNA expression on both substrates by oligonucleotide microarray analysis and quantitative real-time PCR. Well characterized PDECs: (a) could not be expanded adequately with the usual mature ECs culture media; (b) were able to colonize and grow on fibrin glue; (c) exhibited higher resistance to oxidative stress than HSVECs and HUVECs; (d) withstood physiological shear stress when lining both substrates in flow chambers, and their gene expression was regulated; (e) colonized a collagen-impregnated vascular prosthesis and were able to sense mechanical forces. Our results provide an improved qualification of PDECs for vascular tissue engineering.

Seeding density matters: extensive intercellular contact masks the surface dependence of endothelial cell-biomaterial interactions

The effects of seeding density have often been overlooked in evaluating endothelial cell-biomaterial interactions. This study compared the cell attachment and proliferation characteristics of endothelial cells on modified poly (L: -lactic acid) (PLLA) films conjugated to gelatin and chitosan at low and high seeding densities (5,000 and 50,000 cells/cm(2)). During the early stage (2 h) of cell-biomaterial interaction, a low seeding density enabled us to observe the intrinsic surface-dependent differences in cell attachment capacity and morphogenesis, whereas extensive intercellular interactions at high seeding density masked differences between substrates and improved cell attachment on low-affinity substrates. During the later stage of cell-biomaterial interaction over 7-days of culture, the proliferation rate was found to be surface-dependent at low seeding density, whereas this surface-dependent difference was not apparent at high seeding density. It is recommended that low seeding density should be utilized for evaluating biomaterial applications where EC density is likely to be low, such as in situ endothelialization of blood-contacting devices.