Near-infrared light-controllable MXene hydrogel for tunable on-demand release of therapeutic proteins

Hydrogel-Based Growth Factor Delivery Platforms: Strategies and Recent Advances

Growth factors play a crucial role in regulating a broad variety of biological processes and are regarded as powerful therapeutic agents in tissue engineering and regenerative medicine in the past decades. However, their application is limited by their short half-lives and potential side effects in physiological environments. Hydrogels are identified as having the promising potential to prolong the half-lives of growth factors and mitigate their adverse effects by restricting them within the matrix to reduce their rapid proteolysis, burst release, and unwanted diffusion. This review discusses recent progress in the development of growth factor-containing hydrogels for various biomedical applications, including wound healing, brain tissue repair, cartilage and bone regeneration, and spinal cord injury repair. In addition, the review introduces strategies for optimizing growth factor release including affinity-based delivery, carrier-assisted delivery, stimuli-responsive delivery, spatial structure-based delivery, and cellular system-based delivery. Finally, the review presents current limitations and future research directions for growth factor-delivering hydrogels.

Advances in NIR-Responsive Natural Macromolecular Hydrogel Assembly Drugs for Cancer Treatment

Cancer is a serious disease with an abnormal proliferation of organ tissues; it is characterized by malignant infiltration and growth that affects human life. Traditional cancer therapies such as resection, radiotherapy and chemotherapy have a low cure rate and often cause irreversible damage to the body. In recent years, since the traditional treatment of cancer is still very far from perfect, researchers have begun to focus on non-invasive near-infrared (NIR)-responsive natural macromolecular hydrogel assembly drugs (NIR-NMHADs). Due to their unique biocompatibility and extremely high drug encapsulation, coupling with the spatiotemporal controllability of NIR, synergistic photothermal therapy (PTT), photothermal therapy (PDT), chemotherapy (CT) and immunotherapy (IT) has created excellent effects and good prospects for cancer treatment. In addition, some emerging bioengineering technologies can also improve the effectiveness of drug delivery systems. This review will discuss the properties of NIR light, the NIR-functional hydrogels commonly used in current research, the cancer therapy corresponding to the materials encapsulated in them and the bioengineering technology that can assist drug delivery systems. The review provides a constructive reference for the optimization of NIR-NMHAD experimental ideas and its application to human body.

Thermo-Responsive Hydrogels Coupled with Photothermal Agents for Biomedical Applications

Intelligent hydrogels are materials with abilities to change their chemical nature or physical structure in response to external stimuli showing promising potential in multitudinous applications. Especially, photo-thermo coupled responsive hydrogels that are prepared by encapsulating photothermal agents into thermo-responsive hydrogel matrix exhibit more attractive advantages in biomedical applications owing to their spatiotemporal control and precise therapy. This work summarizes the latest progress of the photo-thermo coupled responsive hydrogel in biomedical applications. Three major elements of the photo-thermo coupled responsive hydrogel, i.e., thermo-responsive hydrogel matrix, photothermal agents, and construction methods are introduced. Furthermore, the recent developments of these hydrogels for biomedical applications are described with some selected examples. Finally, the challenges and future perspectives for photo-thermo coupled responsive hydrogels are outlined.

Sprayable Ti3C2 MXene hydrogel for wound healing and drug release system

Wound healing is a critical process that facilitates the body's recovery from injuries and helps prevent infections, thereby maintaining overall tissue and organ functionality. However, delayed wound healing owing to various factors can lead to bacterial infections and secondary complications. In this study, a ciprofloxacin (CIP)-loaded MXene/sodium alginate (SA) hydrogel was fabricated to inhibit bacterial infections and enhance wound healing. The hydrogel was formulated in a sprayable state by blending CIP-loaded MXene (CIP-MX) with SA. This hydrogel was found to exhibit excellent photothermal conversion capability and biocompatibility under near-infrared (NIR) irradiation. In addition, the hydrogel enabled controlled drug release based on NIR irradiation, ultimately enabling improved antibacterial activity. Based on the in vitro and in vivo experiments, the CIP-loaded MXene/SA hydrogel (CIP-MX@Gel) accelerated wound healing. Overall, the CIP-MX@Gel has excellent potential as an effective wound healing material.

MXene-Based Functional Platforms for Tumor Therapy

Recently, 2D transition metal carbide, nitride, and carbonitrides (MXenes) materials stand out in the field of tumor therapy, particularly in the construction of functional platforms for optimal antitumor therapy due to their high specific surface area, tunable performance, strong absorption of near-infrared light as well as preferable surface plasmon resonance effect. In this review, the progress of MXene-mediated antitumor therapy is summarized after appropriate modifications or integration procedures. The enhanced antitumor treatments directly performed by MXenes, the significant improving effect of MXenes on different antitumor therapies, as well as the MXene-mediated imaging-guided antitumor strategies are discussed in detail. Moreover, the existing challenges and future development directions of MXenes in tumor therapy are presented.

Multifunctional MXene-Based Bioactive Materials for Integrated Regeneration Therapy

The reconstruction engineering of tissue defects accompanied by major diseases including cancer, infection, and inflammation is one of the important challenges in clinical medicine. The development of innovative tissue engineering strategies such as multifunctional bioactive materials presents a great potential to overcome the challenge of disease-impaired tissue regeneration. As the major representative of two-dimensional nanomaterials, MXenes have shown multifunctional physicochemical properties and have been diffusely studied as multimodal nanoplatforms in the field of biomedicine. This review summarized the recent advances in the multifunctional properties of MXenes and integrated regeneration-therapy applications of MXene-based biomaterials, including tissue regeneration-tumor therapy, tissue regeneration-infection therapy, and tissue regeneration-inflammation therapy. MXenes have been recognized as good candidates for promoting tissue regeneration and treating diseases through photothermal therapy, regulating cell behavior, and drug and gene delivery. The current challenges and future perspectives of MXene-based biomaterials in integrated regeneration-therapy are also discussed well in this review. In summary, MXene-based biomaterials have shown promising potential for integrated tissue regeneration and disease treatment due to their favorable physicochemical properties and bioactive functions. However, there are still many obstacles and challenges that must be addressed for the regeneration-therapy applications of MXene-based biomaterials, including understanding the bioactive mechanism, ensuring long-term biosafety, and improving their targeting therapy capacity.

Application of pyroptosis in tumor research (Review)

As a potent clinical strategy, cancer therapy has sparked an academic boom over the past few years. Immune checkpoint inhibitors (ICIs) have been demonstrated to be highly successful. These achievements have progressed cancer treatment and have made an indelible mark on cancer. However, the inherent complexity of cancer means that only part of the population can benefit from this treatment. Pyroptosis is a new suicidal cellular mechanism that induces inflammation by releasing immunogenic cellular components. Inflammatory signaling cascades mediated by pyroptosis commonly inspire numerous cell lysis in immune diseases. Contrariwise, this consequence may be a promising target in cancer research. Therefore, the present study briefly described programmed cell death processes and their potential roles in cancer. Because of the rapid development of bioengineering in cancer, the present study also examined the associated scaffolding available for cancer, highlighting advances in tumor engineering approaches. Ultimately, an improved understanding of pyroptosis and tumor scaffolding might shed light on a combination that can be manipulated for therapeutic purposes.

Remotely Controllable Engineered Bacteria for Targeted Therapy of Pseudomonas aeruginosa Infection

Pseudomonas aeruginosa (P. aeruginosa) infection has become an intractable problem worldwide due to the decreasing efficacy of the mainstay therapy, antibiotic treatment. Hence, exploring new drugs and therapies to address this issue is crucial. Here, we construct a chimeric pyocin (ChPy) to specifically kill P. aeruginosa and engineer a near-infrared (NIR) light-responsive strain to produce and deliver this drug. Our engineered bacterial strain can continuously produce ChPy in the absence of light and release it to kill P. aeruginosa via remotely and precisely controlled bacterial lysis induced by NIR light. We demonstrate that our engineered bacterial strain is effective in P. aeruginosa-infected wound therapy in the mouse model, as it eradicated PAO1 in mouse wounds and shortened the wound healing time. Our work presents a potentially spatiotemporal and noninvasively controlled therapeutic strategy of engineered bacteria for the targeted treatment of P. aeruginosa infections.

Layer-by-Layer Microneedle-Mediated rhEGF Transdermal Delivery for Enhanced Wound Epidermal Regeneration and Angiogenesis

Appropriate treatments for acute traumas tend to avoid hemorrhages, vascular damage, and infections. However, in the homeostasis-imbalanced wound microenvironment, currently developed therapies could not precisely and controllably deliver biomacromolecular drugs, which are confronted with challenges due to large molecular weight, poor biomembrane permeability, low dosage, rapid degradation, and bioactivity loss. To conquer this, we construct a simple and effective layer-by-layer (LBL) self-assembly transdermal delivery patch, bearing microneedles (MN) coated with recombinant human epidermal growth factor (LBL MN-rhEGF) for a sustained release to wound bed driven by typical electrostatic force. Pyramidal LBL MN-rhEGF patches hold so enough mechanical strength to penetrate the stratum corneum, and generated microchannels allow rhEGF direct delivery in situ. The administrable delivery of biomacromolecular rhEGF through hierarchically coated MN arrays follows the diffusion mechanism of Fick's second law. Numerous efforts further have illustrated that finger-pressing LBL MN-rhEGF patches could not only promote cell proliferation of normal human dermal fibroblasts (NHDF) and human umbilical vein endothelial cells (HUVEC) in vitro but also take significant effects (regenerative epidermis: ∼144 μm; pro-angiogenesis: higher CD31 expression) in accelerating wound healing of mechanically injured rats, compared to the traditional dressing, which relies on passive diffusion. Our proof-of-concept features novel LBL biomacromolecular drug-delivery systems and self-administrated precision medicine modes at the point of care.

Intestine-inspired wrinkled MXene microneedle dressings for smart wound management

Composite MXene-based materials are prone to crack propagation, thus limiting their tensile properties. Numerous efforts have been devoted to removing material constraints and fabricating unitary MXene elastic films. Here, for the first time, inspired by the intestinal wrinkles and villi structure, we presented a ductile, biologically friendly, and highly conductive MXene-based microneedle (MMN) dressing composed of stacked MXene film and superfine microneedle arrays through a simple stretching and laser engraving strategy for wound healing. By utilizing photothermal responsive MXene, periodic porous structures, and a temperature-responsive polymer to construct the MMN dressing, the system can act as an effective route for facilitating controllable drug delivery controlled by near-infrared (NIR) irradiation. In addition, superior conductivity imparts them with the capacity to realize continuous and steady monitoring of motion sensing. The practical performance further demonstrated that the versatile MMN dressing showed obvious therapeutic efficacy in vivo animal wound models. Thus, it is believed that MMN dressings with biomimetic structures, controllable drug release, and conductive pathways will open a new chapter for wound management and widen other practical applications in biomedical fields, such as artificial tendons and soft robotics. STATEMENT OF SIGNIFICANCE: MXene-based materials have been demonstrated as critical tools in advancing our understanding of wound healing. However, the rapid crack propagation is a constraint on their tensile properties. Here, inspired by the intestinal wrinkles and villi structure, a single-step method has also been discussed to present a MXene-based microneedle dressing composed of unitary MXene elastic film and superfine microneedle arrays. At the same time, the dressing with biomimetic structures, controllable drug release, and conductive pathways has prospects in intelligent wound management and varieties of related biomedical fields.

Small-size Ti3C2Tx MXene nanosheets coated with metal-polyphenol nanodots for enhanced cancer photothermal therapy and anti-inflammation

As a controllable, simple method with few side effects, near-infrared (NIR) light-based photothermal therapy (PTT) has been proven an effective cancer therapeutic approach. However, PTT-induced inflammation is a potential negative factor. And the overexpressed heat shock proteins (HSPs) by cancer cells can protect them from hyperthermia during PTT. In this work, small-size Ti₃C₂T_x MXene nanosheets with high photothermal conversion efficiency in the region of NIR, high cargo loading capability and good free radical scavenging capability were chosen for cancer PTT and anti-inflammation. And (-)-epigallocatechin gallate (EGCG) was applied to form EGCG/Fe metal-polyphenol nanodots on the nanosheets. EGCG being released in acid cancer cells could reduce the expression of HSPs and could be used for anti-inflammation. As a result, the complex nanosheets named MXene@EGCG could achieve enhanced cancer PTT and be anti-inflammatory. Both in vitro and in vivo studies proved the good photothermal ability of MXene@EGCG and demonstrated that it could inhibit the expression of HSPs in tumor cells and relieve PTT-induced inflammation. Therefore, the nanosheets show good results in tumor ablation with a low level of inflammation, which provides another possibility for cancer therapy. STATEMENT OF SIGNIFICANCE: Photothermal therapy (PTT)-induced inflammation plays an essential role in some important stages of tumor development and is unfavorable for cancer treatment. And hyperthermia leads to the overexpression of heat shock proteins (HSPs) in cancer cells, which limits the therapeutic effect of PTT. Therefore, we coated small-size Ti₃C₂T_x MXene nanosheets with (-)-epigallocatechin gallate (EGCG)/Fe metal-polyphenol nanodots and named them as MXene@EGCG. This system shows a good photothermal conversion efficiency at 808 nm. And it can release EGCG in cancer cells to inhibit the expression of HSPs, thus achieving an enhanced cancer PTT. Both MXene and EGCG can also diminish the PTT-trigged inflammation. Both in vitro and in vivo studies prove the good anti-cancer PTT effect and anti-inflammation capability of MXene@EGCG.

Smart microneedle patches for wound healing and management

The number of patients with non-healing wounds is generally increasing globally, placing a huge social and economic burden on every country. The complexity of the wound-healing process remains a major health challenge despite the numerous studies that have been reported on conventional wound dressings. Therefore, a therapeutic system that combines diagnostic and therapeutic modalities is essential to monitor wound-related biomarkers and facilitate wound healing in real time. Microneedles, as a multifunctional platform, are promising for transdermal diagnostics and drug delivery. Their advantages are mainly reflected in painless transdermal drug delivery, good biocompatibility, and ease of self-administration. In this work, we review recent advances in the use of microneedle patches for wound healing and monitoring. The paper first provides a brief overview of the skin structure and the wound healing process, and then discusses the current state of research and prospects for the development of wound-related biomarkers and their real-time monitoring based on microneedle sensors. It summarizes the current state of research based on the unique design of microneedle patches, including biomimetic, conductive, and environmentally responsive, to achieve wound healing. It further summarizes the prospects for the application of different microneedle-based drug delivery modalities and drug delivery substances for wound healing, due to their superior transdermal drug delivery advantages. It concludes with challenges and expectations for the use of smart microneedle patches for wound healing and management.

Roles of MXenes in biomedical applications: recent developments and prospects

....With the development of nanomedical technology, the application of various novel nanomaterials in the biomedical field has been greatly developed in recent years. MXenes, which are new inorganic nanomaterials with ultrathin atomic thickness, consist of layered transition metal carbides and nitrides or carbonitrides and have the general structural formula M_n+1X_nT_x (n = 1-3). Based on the unique structural features of MXenes, such as ultrathin atomic thickness and high specific surface area, and their excellent physicochemical properties, such as high photothermal conversion efficiency and antibacterial properties, MXenes have been widely applied in the biomedical field. This review systematically summarizes the application of MXene-based materials in biomedicine. The first section is a brief summary of their synthesis methods and surface modification strategies, which is followed by a focused overview and analysis of MXenes applications in biosensors, diagnosis, therapy, antibacterial agents, and implants, among other areas. We also review two popular research areas: wearable devices and immunotherapy. Finally, the difficulties and research progress in the clinical translation of MXene-based materials in biomedical applications are briefly discussed.

Bioinspired 3D-Printed MXene and Spidroin-Based Near-Infrared Light-Responsive Microneedle Scaffolds for Efficient Wound Management

Biomedical dressings have been comprehensively explored for wound healing; however, the complicated manufacturing process and mono-function of the dressing remain critical challenges for further applications. Here, a versatile extrusion three-dimensional (3D) printing strategy to prepare MXene and spidroin-incorporated microneedle scaffolds with photothermal responsive and self-healing properties for promoting wound healing is proposed. Inspired by the cactus, the microneedle scaffold is composed of a top porous scaffold, and microneedles whose inverse opal (IO) photonic crystal (PC) structure and the ample space between the scaffold gaps endow the microneedle scaffold with high drug-carrying capacity. Furthermore, the excellent electrical and photothermal properties of MXene allow the microneedle scaffold to perform sensitive wound movement monitoring and controlled drug release under near-infrared irradiation. Moreover, the extensive hydrogen bonding and Schiff base between the spidroin, polyurethane (PU), and aloe vera gel (avGel) molecules conferred high self-healing and mechanical performance to the microneedle scaffold. In vivo experiments with rat models of wounds have shown that drug-laden microneedle scaffolds under near-infrared (NIR) light can promote the recovery of full-skin wounds. These unique characteristics suggest that 3D-printed multifunctional microneedle scaffolds show great potential for applications in facilitating wound healing and will find widespread applications in wound management.

Progress of Research in In Situ Smart Hydrogels for Local Antitumor Therapy: A Review

Cancer seriously threatens human health. Surgery, radiotherapy and chemotherapy are the three pillars of traditional cancer treatment, with targeted therapy and immunotherapy emerging over recent decades. Standard drug regimens are mostly executed via intravenous injection (IV), especially for chemotherapy agents. However, these treatments pose severe risks, including off-target toxic side effects, low drug accumulation and penetration at the tumor site, repeated administration, etc., leading to inadequate treatment and failure to meet patients’ needs. Arising from these challenges, a local regional anticancer strategy has been proposed to enhance therapeutic efficacy and concomitantly reduce systemic toxicity. With the advances in biomaterials and our understanding of the tumor microenvironment, in situ stimulus-responsive hydrogels, also called smart hydrogels, have been extensively investigated for local anticancer therapy due to their injectability, compatibility and responsiveness to various stimuli (pH, enzyme, heat, light, magnetic fields, electric fields etc.). Herein, we focus on the latest progress regarding various stimuli that cause phase transition and drug release from smart hydrogels in local regional anticancer therapy. Additionally, the challenges and future trends of the reviewed in situ smart hydrogels for local drug delivery are summarized and proposed.

Two-dimensional ultrathin Ti3C2 MXene nanosheets coated intraocular lens for synergistic photothermal and NIR-controllable rapamycin releasing therapy against posterior capsule opacification

Posterior capsule opacification (PCO) is one of the most frequent late-onset complications after cataract surgery. Several kinds of drug-eluting intraocular lenses (IOL) were designed for sustainable drug release to suppress ocular inflammation, the proliferation of lens epithelial cells (LECs) and the development of PCO after cataract surgery. Despite previous advances in this field, the drug-loaded IOLs were limited in ocular toxicity, insufficient drug-loading capacity, and short release time. To prevent PCO and to address these drawbacks, a novel drug-loaded IOL (Rapa@Ti3C2-IOL), prepared from two-dimensional ultrathin Ti3C2 MXene nanosheets and rapamycin (Rapa), was fabricated with a two-step spin coating method in this study. Rapa@Ti3C2 was prepared via electrostatic self-assembly of Ti3C2 and Rapa, with a loading capacity of Rapa at 92%. Ti3C2 was used as a drug delivery reservoir of Rapa. Rapa@Ti3C2-IOL was designed to have the synergistic photothermal and near infrared (NIR)-controllable drug release property. As a result, Rapa@Ti3C2-IOL exhibited the advantages of simple preparation, high light transmittance, excellent photothermal conversion capacity, and NIR-controllable drug release behavior. The Rapa@Ti3C2 coating effectively eliminated the LECs around Rapa@Ti3C2-IOL under a mild 808-nm NIR laser irradiation (1.0 W/cm−2). Moreover, NIR-controllable Rapa release inhibited the migration of LECs and suppressed the inflammatory response after photothermal therapy in vitro. Then, Rapa@Ti3C2-IOL was implanted into chinchilla rabbit eyes, and the effectiveness and biocompatibility to prevent PCO were evaluated for 4 weeks. The Rapa@Ti3C2-IOL implant exhibited excellent PCO prevention ability with the assistance of NIR irradiation and no obvious pathological damage was observed in surrounding healthy tissues. In summary, the present study offers a promising strategy for preventing PCO via ultrathin Ti3C2 MXene nanosheet-based IOLs with synergistic photothermal and NIR-controllable Rapa release properties.

Advances of MXenes; Perspectives on Biomedical Research

The last decade witnessed the emergence of a new family of 2D transition metal carbides and nitrides named MXenes, which quickly gained momentum due to their exceptional electrical, mechanical, optical, and tunable functionalities. These outstanding properties also rendered them attractive materials for biomedical and biosensing applications, including drug delivery systems, antimicrobial applications, tissue engineering, sensor probes, auxiliary agents for photothermal therapy and hyperthermia applications, etc. The hydrophilic nature of MXenes with rich surface functional groups is advantageous for biomedical applications over hydrophobic nanoparticles that may require complicated surface modifications. As an emerging 2D material with numerous phases and endless possible combinations with other 2D materials, 1D materials, nanoparticles, macromolecules, polymers, etc., MXenes opened a vast terra incognita for diverse biomedical applications. Recently, MXene research picked up the pace and resulted in a flood of literature reports with significant advancements in the biomedical field. In this context, this review will discuss the recent advancements, design principles, and working mechanisms of some interesting MXene-based biomedical applications. It also includes major progress, as well as key challenges of various types of MXenes and functional MXenes in conjugation with drug molecules, metallic nanoparticles, polymeric substrates, and other macromolecules. Finally, the future possibilities and challenges of this magnificent material are discussed in detail.

Enhanced postoperative cancer therapy by iron-based hydrogels

Surgical resection is a widely used method for the treatment of solid tumor cancers. However, the inhibition of tumor recurrence and metastasis are the main challenges of postoperative tumor therapy. Traditional intravenous or oral administration have poor chemotherapeutics bioavailability and undesirable systemic toxicity. Polymeric hydrogels with a three-dimensional network structure enable on-site delivery and controlled release of therapeutic drugs with reduced systemic toxicity and have been widely developed for postoperative adjuvant tumor therapy. Among them, because of the simple synthesis, good biocompatibility, biodegradability, injectability, and multifunctionality, iron-based hydrogels have received extensive attention. This review has summarized the general synthesis methods and construction principles of iron-based hydrogels, highlighted the latest progress of iron-based hydrogels in postoperative tumor therapy, including chemotherapy, photothermal therapy, photodynamic therapy, chemo-dynamic therapy, and magnetothermal-chemical combined therapy, etc. In addition, the challenges towards clinical application of iron-based hydrogels have also been discussed. This review is expected to show researchers broad perspectives of novel postoperative tumor therapy strategy and provide new ideas in the design and application of novel iron-based hydrogels to advance this sub field in cancer nanomedicine.

Size-dependent photothermal antibacterial activity of Ti3C2Tx MXene nanosheets against methicillin-resistant Staphylococcus aureus

Developing antibiotics-independent antibacterial materials is of great importance for combating drug-resistant bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA). MXene (transition metal carbides and nitrides), a class of novel 2D nanomaterials, has shown great potentials in biomedical areas. However, the effect of MXene size on its properties and bioactivity is still unknown. Herein, we report for the first time that the antibacterial photothermal therapy efficacy of Ti₃C₂T_x MXene nanosheets is size-dependent. Three MXene suspensions with small size of 196 nm (MX-s), medium size of 347 nm (MX-m) and large size of 497 nm (MX-l) were prepared via ultrasonication. Upon NIR irradiation for 5 min, the temperature of MXene suspensions (10 μg/mL) increased to 64, 60 and 56 °C for MX-s, MX-m and MX-l, respectively. Accordingly, the viability loss of MRSA induced by MX-s, MX-m and MX-l under NIR was 93%, 69% and 56%, respectively. The in vivo study in the MRSA-infected mouse model showed that the photothermal therapy efficacy of MX-s was comparable to that of the positive control vancomycin. This is the first report on the size-dependent photothermal effect and photothermal antibacterial activity of MXene, which may guide the development of MXene-based therapeutics in the future. In addition, the drug-free antibacterial therapy has great implications for the treatment of antibiotics-resistant bacteria infections.