Fluorine-containing bio-inert polymers: Roles of intermediate water

Role of intermediate water in alleviating postsurgical intrapericardial adhesion

PURPOSE

Various polymers have been used as postsurgical antiadhesive materials; however, the mechanisms underlying their efficacy remain unclear. Intermediate water has been found to prevent the adhesion between polymer molecules and proteins or cells. The present study investigated the role of intermediate water retained in the polymer in alleviating postsurgical pericardial adhesion.

METHODS

Hydrophobic fabrics were prepared using biodegradable polyglycolic acid. To add intermediate water, the fabric fibers were coated with poly(oxyethylene)oleyl ethers. Intermediate water in the hydrated state was detected by a thermal analysis for each material, and cell attachment to the fibers with or without coating was observed in vitro. Using a canine model of postsurgical pericardial adhesion, the severity of adhesion was examined along with a histological assessment during treatment, with or without fabric coating.

RESULTS

Intermediate water was detected in the coating materials but not in polyglycolic acid. Coating significantly reduced the cell attachment to the fibers. Coating also alleviated adhesion by reducing inflammation in the fibrous layer and replacing the fabric and granulomas that develop around the surgical sutures in the pericardial space.

CONCLUSIONS

Intermediate water in the hydrated polymer of anti-adhesives may play an important role in alleviating postoperative pericardial adhesion.

On the Performance of Second-Order Polarization Propagator Methods in the Calculation of 1JFC and nJFH NMR Spin-Spin Coupling Constants

This study evaluates the performance of doubles-corrected random phase approximation (RPA) and higher random phase approximation (HRPA) approaches in predicting nuclear magnetic resonance (NMR) coupling constants involving fluorine. Their performance is benchmarked against experimental data and compared with that of higher-level theoretical methods, specifically second-order polarization propagator (SOPPA) and SOPPA(CCSD). Additionally, we discuss their performance relative to density functional theory (DFT). We find that RPA(D) is severely constrained by (near) triplet instabilities, while HRPA(D) demonstrates markedly improved stability. Statistical analysis reveals stronger patterns for carbon-fluorine couplings across the methods and systems investigated compared with fluorine-hydrogen couplings. While SOPPA-based methodologies prove to be superior in accuracy, HRPA(D) shows promising performance in reducing the computational burden of these calculations, albeit with a tendency to underestimate the coupling strength. These findings highlight the potential of HRPA(D) as a practical alternative to SOPPA methods, even for such difficult properties as NMR spin-spin coupling constants involving fluorine, emphasizing its role in improving predictive accuracy and efficiency across diverse chemical environments.

TFE Terpolymers: Once Promising - Are There Still Perspectives in the 21st Century? Part II: Processing, Properties, Applications

Tetrafluoroethylene (TFE) terpolymers have emerged as advantageous substitutes for polytetrafluoroethylene (PTFE). Therefore, they are being considered as alternatives to PTFE in many application areas. The advantages of TFE terpolymers include their facile processability at elevated temperatures, their solubility in some polar organic solvents, their inertness against aqueous acids, aqueous bases and a large number of mostly nonpolar organic solvents, their low dielectric constant, their low refractive index as well as useful electro- and thermochemical properties. This review on TFE terpolymers focuses on their processing including shaping and surface modification as well as on selected properties including wettability, dielectric properties, mechanical response behavior, chemical stability, and degradability. Applications including their use as elastomeric sealing material, liner and cladding layer as well as their use as material for membranes, microfluidic devices, photonics, photovoltaics, energy storage, energy harvesting, sensors, and nanothermitic composites will be discussed. The review concludes with a discussion of the future potential of TFE terpolymers and scientific challenges to be addressed by future research on TFE terpolymers.

Non-isocyanate polyurethane-co-polyglycolic acid electrospun nanofiber membrane wound dressing with high biocompatibility, hemostasis, and prevention of chronic wound formation

The prevention of chronic wound formation has already been a primary subject in wound management, particularly for deep wounds. The electrospun nanofiber membranes hold tremendous potential in the prevention of chronic wounds due to their micro/nano pore structures. Currently, many natural and synthetic materials have been utilized in the fabrication of nanofiber membranes. However, striking a balance between the structural stability and the biocompatibility remains challenging. It is necessary not only to ensure the long-term durability of nanofiber membranes but also to enhance their biocompatibility for alleviating patients' suffering. In this study, we reported a nanofiber membrane dressing with excellent biocompatibility and mechanical properties, which is potential for the treatment of deep wounds. The basal material chosen for the preparation of the nanofiber membrane was a co-polyester (NI-LPGD5) synthesized by non-isocyanate polyurethane (NIPU) and polyglycolic acid with a dihydroxy structure (LPGD-synthesized from glycolic acid and neopentyl glycol). Moreover, curcumin was also added as a bioactive substance to enhance the pro-healing effect of dressings. The physicochemical properties of the prepared nanofiber membranes were characterized through various physicochemical tools. Our results demonstrated that the NI-LPGD5 co-polymer can be electrospun into smooth fibers. Meanwhile, curcumin-loaded nanofiber membranes (Cur/NI-LPGD5) also exhibited a favorable microscopic morphology. The fabricated membranes exhibited suitable mechanical properties, outstanding hygroscopic-swelling rate and water vapor transmittance. Besides, in vitro cell culturing, the cells on the NI-LPGD5 membrane maintained their maximum viability. The potential of in vivo wound healing was further demonstrated through animal experiments. The experimental results showed that the nanofiber membranes effectively prevented chronic wounds from forming and promoted granulation tissue growth without replacing the dressing throughout the healing process. We also found that these nanofiber membranes could effectively promote the expression of related biomarkers to accelerate wound healing, particularly the Cur/NI-LPGD5 membrane. In conclusion, the fabricated membranes possess suitable physicochemical properties and promising bioactivity. As a result, it effectively prevented the formation of chronic wounds and demonstrated significant potential in reducing the frequency of dressing changes.

High-speed cryo-microscopy reveals that ice-nucleating proteins of Pseudomonas syringae trigger freezing at hydrophobic interfaces

Ice-nucleating proteins (INpro) trigger the freezing of supercooled water droplets relevant to atmospheric, biological, and technological applications. The high ice nucleation activity of INpro isolated from the bacteria Pseudomonas syringae could be linked to the aggregation of proteins at the bacterial membrane or at the air-water interface (AWI) of droplets. Here, we imaged freezing onsets, providing direct evidence of these proposed mechanisms. High-speed cryo-microscopy identified the onset location of freezing in droplets between two protein-repellent glass slides. INpro from sterilized P. syringae (Snomax) statistically favored nucleation at the AWI of the droplets. Removing cellular fragments by filtration or adding surfactants increased the frequency of nucleation events at the AWI. On the other hand, cultivated intact bacteria cells or lipid-free droplets nucleated ice without an affinity to the AWI. Overall, we provide visual evidence that INpro from P. syringae trigger freezing at hydrophobic interfaces, such as the AWI or the bacterial membrane, with important mechanistic implications for applications of INpro.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Fluoropolymers as Unique and Irreplaceable Materials: Challenges and Future Trends in These Specific Per or Poly-Fluoroalkyl Substances

In contrast to some low-molar-mass per- and polyfluoroalkyl substances (PFASs), which are well established to be toxic, persistent, bioaccumulative, and mobile, fluoropolymers (FPs) are water-insoluble, safe, bioinert, and durable. These niche high-performance polymers fulfil the 13 polymer-of-low-concern (PLC) criteria in their recommended conditions of use. In addition, more recent innovations (e.g., the use of non-fluorinated surfactants in aqueous radical (co)polymerization of fluoroalkenes) from industrial manufacturers of FPs are highlighted. This review also aims to show how these specialty polymers endowed with outstanding properties are essential (even irreplaceable, since hydrocarbon polymer alternatives used in similar conditions fail) for our daily life (electronics, energy, optics, internet of things, transportation, etc.) and constitute a special family separate from other "conventional" C1-C10 PFASs found everywhere on Earth and its oceans. Furthermore, some information reports on their recycling (e.g., the unzipping depolymerization of polytetrafluoroethylene, PTFE, into TFE), end-of-life FPs, and their risk assessment, circular economy, and regulations. Various studies are devoted to environments involving FPs, though they present a niche volume (with a yearly production of 330,300 t) compared to all plastics (with 460 million t). Complementary to other reviews on PFASs, which lack of such above data, this review presents both fundamental and applied strategies as evidenced by major FP producers.

A spiropyran-decorated nanocoating for dynamically regulating bacteria/cell adhesion and detachment

Microorganism adhesion and the resulting contamination of the biomaterial is one of the major causes of biomedical device failure. Stimuli-responsive materials based on dynamically regulating interactions with reversible characteristics of on-off states have attracted increasing attention. Here, a facile self-assembled biomaterial nanocoating constructed using acidity- and photoregulated spiropyran-modified nanoparticles was developed for reversibly regulating bacteria or mammalian cell adhesion-and-detachment. The coating was formed by coating a solution of spiropyran-conjugated nanoparticles around the surface of a silica gel followed by curing and drying at 60 °C for 30 min. Importantly, efficient adhesion-and-detachment of bacteria or cells could be controlled even after 8 cycles owing to the excellent acidity- and light-switched ability. Collectively, this well-defined self-assembled nanocoating as a dynamical and reversible agent provides promising insight for the development of biomedical devices, especially for biomaterial medical coatings.

Altering the bio-inert properties of surfaces by fluorinated copolymers of mPEGMA

Hydrophilic materials display "bio-inert properties", meaning that they are less recognized as foreign substances by proteins and cells. Such materials are often water soluble; therefore, one general approach to enable the use of these materials in various applications deals with copolymerizing hydrophilic monomers with hydrophobic ones to facilitate such resulting copolymers water insoluble. However, reducing the hydrophilic monomer amount may reduce the bio-inert properties of the material. The decrease in bio-inert properties can be avoided when small amounts of fluorine are used in copolymers with hydrophilic monomers, as presented in this article. Even in small quantities (7.9 wt%), the fluorinated monomer, 1,1,1,3,3,3-hexafluoropropan-2-yl 2-fluoroacrylate (FAHFiP), contributed to the improved hydrophobicity of the polymers of the long side-chain poly(ethylene glycol) methyl ether methacrylate (mPEGMA) bearing nine ethylene glycol units turning them water insoluble. As evidenced by the AFM deformation image, a phase separation between the FAHFiP and mPEGMA domains was observed. The copolymer with the highest amount of the fluorinated monomer (66.2 wt%) displayed also high (82 %) FAHFiP amount at the polymer-water interface. In contrast, the hydrated sample with the lowest FAHFiP/highest mPEGMA amount was enriched of three times more hydrophilic domains at the polymer-water interface compared to that of the sample with the highest FAHFiP content. Thus, by adding a small FAHFiP amount to mPEGMA copolymers, water insoluble in the bulk too, could be turned highly hydrophilic at the water interface. The high content of intermediate water contributed to their excellent bio-inert properties. Platelet adhesion and fibrinogen adsorption on their surfaces were even more decreased as compared to those on poly(2-methoxyethyl acrylate), which is typically used in medical devices.

Fibrin Adsorption on Cardiovascular Biomaterials and Medical Devices

Medical devices that are inserted in blood vessels always risk eliciting thrombosis, and the surface properties of such devices are thus of major importance. The initiating step for surface-induced pathological coagulation has been associated with adsorption of fibrinogen protein on biomaterial surfaces and subsequent polymerization into an insoluble fibrin clot. This issue gives rise to an inherent challenge in biomaterial design as varied surface materials must fulfill specialized roles while also minimizing thrombotic complications from spontaneous fibrin(ogen) recruitment. We have aimed to characterize the thrombogenic properties of state-of-the-art cardiovascular biomaterials and medical devices by quantifying the relative surface-dependent adsorption and formation of fibrin followed by analysis of the resulting morphologies. We identified stainless steel and amorphous fluoropolymer as comparatively preferable biomaterials based on their low fibrin(ogen) recruitment, in comparison to other metallic and polymeric biomaterials, respectively. In addition, we observed a morphological trend that fibrin forms fiber structures on metallic surfaces and fractal branched structures on polymeric surfaces. Finally, we used vascular guidewires as clotting substrates and found that fibrin adsorption depends on parts of the guidewire that are exposed, and we correlated the morphologies on uncoated guidewires with those formed on raw stainless-steel biomaterials.