Treatment of a severe arch-length deficiency with anteroposterior and transverse expansion: long-term stability

Orthodontic camouflage treatment for a patient with bilateral cleft lip and palate, bilateral crossbite, and microdontic maxillary lateral incisors

Cleft lip and palate is a congenital craniofacial anomaly that affects the lip and oral cavity. The management and orthodontic treatment of this anomaly is important but challenging. This article reports the successful treatment of a patient with bilateral cleft lip and palate, Class III malocclusion, bilateral crossbite, crowding and microdontic maxillary lateral incisors. One mandible incisor was extracted, and three miniscrew anchorages were utilized to distalize the maxillary left dental arch and retract the mandibular arch. After treatment, ideal occlusion and a better profile were established, and long-term stability was confirmed by a 4-year follow-up. This article represents a successful attempt of orthodontic camouflage treatment of severe dentofacial discrepancy, as an important part of the series treatment of cleft lip and palate, to provide some insight into the clinical field.

A Modified Hyrax Assembly for Intrusion of a Traumatically Extruded Incisor: An Innovative Technique

This case report demonstrates an innovative technique involving concomitant correction of a traumatic extrusive luxated tooth, the mobility of which was being aggravated by anterior occlusal contacts, along with transverse rapid maxillary expansion to capitalize on the advantage of residual growth and simplify the need for comprehensive fixed orthodontic appliance. By incorporating a molar tube into the acrylic splint of the bonded Hyrax expander adjacent to the buccal surfaces and parallel to the buccal cusps of the maxillary first molars, effective intrusion of traumatically extruded upper incisor was achieved concomitantly using a modified intrusion arch during the passive stabilization period after expansion, thereby reducing treatment time. This enabled the immediate correction of extruded tooth and reduced the overall treatment duration and the complexity of post-expansion fixed mechanotherapy, improving compliance and uplifting the self-esteem of the patient. The modified bonded Hyrax assembly can serve as a versatile interim appliance for the simultaneous management of a variety of orthodontic problems such as crowding, spacing, and incisor proclination without compromising the basic integrity of the bonded assembly.

Is maxillary arch expansion with Invisalign® efficient and predictable? A systematic review

BACKGROUND

The main objective of this review is to assess the effectiveness and predictability of the transverse expansion movement performed by Invisalign®. The secondary objectives are to determine whether the expansion is of a dentoalveolar or skeletal nature, and to locate the areas of expansion on the dental arch.

METHODS

Two investigators used the PubMed database to search for articles related to the subject. After using a research equation, specific inclusion and exclusion criteria were applied and the final selection of articles was done after being read in full. The ROBINS-I tool for non-randomized studies was applied to assess risk of bias in the results of each included study.

RESULTS

After reading the articles in full, 12 articles were included. Regarding effectiveness, most studies showed an increase in all measured interdental distances, with a maximum expansion at the premolar level. As for predictability, significant differences were found between post-treatment models and Clincheck® models, making it generally weak. Concerning the nature and areas of expansion, increase of arch width was due to buccal tipping of the crowns following a decreasing gradient from anterior to posterior.

CONCLUSIONS

Invisalign® treatment is effective in achieving a maxillary transverse expansion. However, this expansion is mainly dentoalveolar, with a facial crown tipping of the posterior teeth. Clincheck® software tends to overestimate the expansion movement when compared to the clinical outcome, therefore the predictability of movement is low.

A Simple Technique Using a Modified Nance Appliance as Anchorage for Maxillary Molar Distalization—Two Case Reports

Maxillary molar distalization to correct a dental Class II molar relationship and to create space to relieve crowding has been a long-lasting subject of debate in orthodontics. Generally, to distalize maxillary molars, an intra-arch distalization appliance is favored over an inter-arch appliance since it does not utilize mandibular dentition as an anchorage, so some unwanted side effects on mandibular incisors can be avoided. A variety of intra-arch appliances have been developed to distalize maxillary molars, such as the pendulum, Jones jig, first class appliance, distal jet, and modified C-palatal plate. Although they could achieve efficient molar distalization, the learning curve of proper appliance insertion and activation is relatively long. In addition, the appliances are not comfortable for the patients due to the bulky activation units, especially when the activation units are designed in the palatal area. The current manuscript describes a novel and effective maxillary intra-arch molar distalization appliance—a modified Nance appliance technique, which consists of: (1) palatally, a big acrylic button against the palatal rugae and connected to the premolars with wide mesh pads; (2) buccally, regular brackets on maxillary premolars and first molars with sectional round stainless steel archwires and open coil springs between the second premolar and first molar. Either bilateral or unilateral maxillary molar distalization can be achieved with this appliance, and the Class II elastics are not needed. It is simple to be fabricated, delivered, and activated, and it is comfortable for patients.

Long-Term Outcomes of Nonextraction Treatment in a Patient with Severe Mandibular Crowding

OBJECTIVE

To describe a clinical case with a severe mandibular crowding treated without extraction and showing a long-term outcome.

METHODS

A 14-year-old boy in permanent dentition showed a class I molar and cuspid relationship, a severe deep bite of 8 mm, a constricted V-shaped upper arch with moderate crowding, and a severe crowding of about 12 mm in the lower arch. The panoramic X-ray showed an impacted upper right canine. The treatment started with the placement of a transpalatal bar and 0.022 × 0.028 in standard edgewise appliances in the upper arch and a lip bumper bonded on the second lower molars. Initial leveling of the teeth was accomplished with light Australian round wires. Finishing was then performed with rectangular wires. The phase with fixed appliances lasted 2 years and 9 months, and the patient was motivated and cooperative throughout the treatment, although with poor oral hygiene. The patient was treated without extractions.

RESULTS

The space was gained with the first and second upper molar derotations using the transpalatal bar and the gingival lip bumper in the lower arch. The upper right canine was well positioned, and the maxillary arch form was improved. The severe lower crowding was completely corrected, and a good overbite was achieved.

CONCLUSION

A conservative, nonextraction treatment approach for this patient with class I malocclusion with severe mandibular crowding was effective, and the results have remained stable after a long-term follow-up (10 years).

Intraoral Molar Distalization with Intraosseous Mini Screw

The aim of the present study was to evaluate the effects of the miniscrew-supported, modified Hyrax appliance on bilateral distalization of posterior teeth. A 15-year-old girl with Class II malocclusion (end-to-end molar relationships, space deficiency for maxillary canine) underwent orthodontic treatment. The patient rejected tooth extraction. Then, she was treated with the miniscrew-supported, modified Hyrax appliance. An activation of 1 mm per month was planned. Lateral cephalometric views were used to evaluate distal movement. Distalization was successfully achieved at 4 months. No anchorage loss and incisor protrusion were noted. It would be beneficial to choose this appliance for the distalization of maxillary molars in patients with maxillary incisor protrusion, as this appliance does not cause anchorage loss in the upper jaw.

Bilateral en-masse distalization of maxillary posterior teeth with skeletal anchorage: a case report

Objective:

The aim of this study was to introduce a new method for bilateral distal movement of the entire maxillary posterior segment.

Case report:

A 17-year-old girl with Class I skeletal malocclusion (end-to-end molar relationships, deviated midline and space deficiency for left maxillary canine) was referred for orthodontic treatment. She did not accept maxillary first premolars extraction. A modified Hyrax appliance (Dentaurum Ispringen, Germany) was used for bilateral distalization of maxillary posterior teeth simultaneously. Expansion vector was set anteroposteriorly. Posterior legs of Hyrax were welded to first maxillary molar bands. All posterior teeth on each side consolidated with a segment of 0.017 × 0.025-in stainless steel wire from the buccal side. Anterior legs of Hyrax were bent into eyelet form and attached to the anterior palate with two mini-screws (2 × 10 mm) (Jeil Medical Corporation Seoul, South Korea). Hyrax opening rate was 0.8 mm per month. Lateral cephalometric radiographs were used to evaluate the extent of distal movement. 3.5-mm distalization of posterior maxillary teeth was achieved in five months.

Results:

A nearly bodily distal movement without anchorage loss was obtained.

Conclusion:

The mini-screw-supported modified Hyrax appliance was found to be helpful for achieving en-masse distal movement of maxillary posterior teeth.

Nonextraction treatment of a skeletal Class III adolescent girl with expansion and facemask: long-term stability

This article describes the combined use of maxillary expansion and a protraction facemask in the correction of a skeletal Class III malocclusion after the patient's pubertal growth spurt. Treatment efficacy and the effects on facial and smile esthetics are presented. The nonextraction option with an arch-size increase and stability issues is discussed.

Posterior crossbite--treatment and stability

Posterior crossbite is defined as an inadequate transversal relationship of maxillary and mandibular teeth. Even when eliminating the etiologic factors, this malocclusion does not have a spontaneous correction, and should be treated with maxillary expansion as early as possible. This treatment aims at providing a better tooth/skeletal relationship, thereby improving masticatory function, and establishing a symmetrical condyle/fossa relationship. Should posterior crossbite not be treated early, it may result in skeletal changes, demanding a more complex approach. Additionally, an overcorrection expansion protocol should be applied in order to improve the treatment stability. Although the literature has reported a high rate of relapse after maxillary expansion, the goal of this study was to demonstrate excellent stability of the posterior crossbite correction 21 years post treatment.