Alternative protocols for the production of more sustainable agar-based extracts from Gelidium sesquipedale

Algal carbohydrates: Sources, biosynthetic pathway, production, and applications

Algae play a significant role in the global carbon cycle by utilizing photosynthesis to efficiently convert solar energy and atmospheric carbon dioxide into various chemical compounds, notably carbohydrates, pigments, lipids, and released oxygen, making them a unique sustainable cellular factory. Algae mostly consist of carbohydrates, which include a broad variety of structures that contribute to their distinct physical and chemical properties such as degree of polymerization, side chain, branching, degree of sulfation, hydrogen bond etc., these features play a crucial role in regulating many biological activity, nutritional and pharmaceutical properties. Algal carbohydrates have not received enough attention in spite of their distinctive structural traits linked to certain biological and physicochemical properties. Nevertheless, it is anticipated that there will be a significant increase in the near future due to increasing demand, sustainable source, biofuel generation and their bioactivity. This is facilitated by the abundance of easily accessible information on the structural data and distinctive characteristics of these biopolymers. This review delves into the different types of saccharides such as agar, alginate, fucoidan, carrageenan, ulvan, EPS and glucans synthesized by various macroalgal and microalgal systems, which include intracellular, extracellular and cell wall saccharides. Their structure, biosynthetic pathway, sources, production strategies and their applications in various field such as nutraceuticals, pharmaceuticals, biomedicine, food and feed, cosmetics, and bioenergy are also elaborately discussed. Algal polysaccharide has huge a scope for exploitation in future due to their application in food and pharmaceutical industry and it can become a huge source of capital and income.

Life cycle assessment and cost analysis of innovative agar extraction technologies from red seaweeds

Developing efficient and sustainable extraction technologies for valuable biocompounds from seaweed is crucial to overcome the limitations of conventional technologies. This study aims to compare three innovative technologies for agar extraction from two red seaweed species, G. sesquipedale and G. vermiculophylla: subcritical water extraction (performed at 125 °C, 2.5 atm, 1 min, and at 140 °C, 3.8 atm, 1 s), moderate electric fields (applied at 85 °C for 120 min and 95 °C for 180 min), and a combination of both methods. The comparison used life cycle assessment and life cycle costing methodologies, considering a gate-to-gate approach. The combined technology demonstrated the lowest energy consumption, with 67 MJ/kgagar for G. vermiculophylla and 100 MJ/kgagar for G. sesquipedale. A carbon footprint reduction of up to 94 % was obtained when compared to the control, with 15.9 kgCO2 eq. /kgagar for G. vermiculophylla and 20.4 kgCO2 eq. /kgagar for G. sesquipedale. Using photovoltaic panels as alternative energy further cut carbon emissions by 50 %. The cost analysis showed that the combined technology was the most cost-effective extraction method.

Three-Dimensional Printing of Red Algae Biopolymers: Effect of Locust Bean Gum on Rheology and Processability

Seaweeds, rich in high-value polysaccharides with thickening/gelling properties (e.g., agar, carrageenan, and alginate), are extensively used in the food industry for texture customization and enhancement. However, conventional extraction methods for these hydrocolloids often involve potentially hazardous chemicals and long extraction times. In this study, three red seaweed species (Chondrus crispus, Gelidium Corneum, and Gracilaria gracilis) commercialized as food ingredients by local companies were chosen for their native gelling biopolymers, which were extracted using water-based methodologies (i.e., (1) hydration at room temperature; (2) stirring at 90 °C; and (3) centrifugation at 40 °C) for production of sustainable food gels. The potential use of these extracts as bioinks was assessed employing an extrusion-based 3D printer. The present work aimed to study the gelation process, taken place during printing, and assess the effectiveness of the selected green extraction method in producing gels. To improve the definition of the printed gel, two critical printing parameters were investigated: the addition of locust bean gum (LBG) at different concentrations (0, 0.5, 1, 1.5, 2, and 2.5%) and printing temperature (30, 40, 60, and 80 °C). Rheological results from a controlled-stress rheometer indicated that gels derived from G. corneum and G. gracilis exhibited a lower gel strength (lower G' and G″) and excessive material spreading during deposition (lower viscosity) than C. crispus. Thus, G' was around 5 and 70 times higher for C. crispus gels than for G. corneum and G. gracilis, respectively. When increasing LBG concentration (0.5 to 2.5% w/w) and lowering the printing temperature (80 to 30 °C), an enhanced gel matrix definition for G. corneum and G. gracilis gels was found. In contrast, gels from C. crispus demonstrated greater stability and were less influenced by these parameters, showcasing the potential of the seaweed to develop sustainable clean label food gels. Eventually, these results highlight the feasibility of using algal-based extracts obtained through a green procedure as bioinks where LBG was employed as a synergic ingredient.

Progress of ligand-modified agarose microspheres for protein isolation and purification

Proteins are the material basis of life and the primary carriers of life activities, containing various impurities that must be removed before use. To keep pace with the increasing complexity of protein samples, it is essential to constantly work on developing new purification technologies for downstream processes. While traditional downstream purification methods rely heavily on protein A affinity chromatography, there is still a lot of interest in finding safer and more cost-effective alternatives to protein A. Many non-affinity ligands and technologies have also been developed in biological purification recently. Here, the current status of biotechnology and the progress of protein separation technology from 2018 to 2023 are reviewed from the aspects of new preparation methods and new composite materials of commonly used separation media. The research status of new ligands with different mechanisms of action was reviewed, including the expanded application of affinity ligands, the development prospect of biotechnology such as polymer grafting, continuous column technology, and its new applications.

Impact of ultrasound treatment on the structural modifications and functionality of carbohydrates - A review

Carbohydrates are crucial in food as essential biomolecules, serving as natural components, ingredients, or additives. Carbohydrates have numerous applications in the food industry as stabilizers, thickeners, sweeteners, and humectants. The properties and functionality of the carbohydrates undergo alterations when exposed to various thermal or non-thermal treatments. Ultrasonication is a non-thermal method that modifies the structural arrangement of carbohydrate molecules. These structural changes lead to enhanced gelling and viscous nature of the carbohydrates, thus enhancing their scope of application. Ultrasound may improve carbohydrate functionality in an environmentally sustainable way, leaving no chemical residues. The high-energy ultrasound treatments significantly reduce the molecular size of complex carbohydrates. Sonication parameters like treatment intensity, duration of treatment, and energy applied significantly affect the molecular size, depolymerization, viscosity, structural modifications, and functionality of carbohydrate biomolecules. This review provides a comprehensive analysis of ultrasound-assisted modifications in carbohydrates and the changes in functional properties induced by sonication.

Effect of Birch Sap as Solvent and Source of Bioactive Compounds in Casein and Gelatine Films

Birch sap consists of a natural water-based solution with valuable compounds such as minerals, sugars, organic acids and phenolic compounds that can be used advantageously in the preparation of edible films. In this study, gelatine- and casein-based films were prepared using birch sap as biopolymer solvent and source of bioactive compounds with the aim of developing new bioactive materials for food packaging. The physical, mechanical, barrier, antioxidant and iron-chelating properties of the obtained films were investigated. Birch sap enhanced the mechanical properties of the films by increasing puncture strength and flexibility, as well as their ultraviolet-visible light barrier properties. In addition, the presence of bioactive compounds endowed the birch sap films with an antioxidant capacity of almost 90% and an iron-chelating capacity of 40-50% with respect to the control films. Finally, to test these films as food packaging material, a photosensitive curcumin solution was packed and exposed to ultraviolet light. Tested films were able to protect curcumin against photodegradation, and the presence of bioactive compounds inside the birch-sap-enriched materials offered an additional 10% photoprotective effect compared to control films. Results showed the potential of birch sap as an environmentally friendly biopolymer solvent and plasticizer that can improve the mechanical and photoprotective properties of the prepared materials.

Potential Contribution to Dietary Reference Intake (DRI) of Agar Extracted from Gelidium latifolium (Gelidiaceae, Rhodophyta) as a Mineral Source

Ca, Na, Mg, K, P, Fe, Zn, Mn, V, Cr, Ni, Cu, Mo, and Se were determined in agar obtained seasonally from Gelidium latifolium in coast of Black Sea, using the inductively coupled plasma mass spectroscopy. Also, the potential contribution of the agar to the dietary reference intakes (DRIs) was evaluated according to the Basic Nutritional Requirements Guideline released by the Institute of Medicine and the Official Journal of the European Union. The results show that agar extracted from G. latifolium could be used as a food supplement to help meet the DRIs of certain essential minerals and trace elements. In the study, the most dominant macro and micro elements were found to be potassium (K), calcium (Ca), sodium (Na), iron (Fe), and manganese (Mn), respectively. The Na/K ratio of the agar obtained seasonally was found to be below the maximum limits recommended by international organizations (Na/K ≤ 0.6). The Ca/Mg ratio was calculated between 1.44 and 1.55 throughout the year. The Ca/Mg and K/Na ratios were not reflected highly significant difference between seasons. Ion quotient values for extracted agar were between 0.36 and 40.54, so they can reduce hypertension, preeclampsia, and heart disease in human beings. Accordingly, extracted agar from G. latifolium red seaweed were of high quality and safety and might be used in the field of nutrition.

Synthesis, characterization, antibacterial and emulsifying properties of agar benzoate

Agar benzoate (AB) with different degrees of substitution (DS) was synthesized by the esterification of agar and benzoic anhydride in aqueous solution. The DS could be regulated by adjusting composition ratio, pH, and temperature. Its chemical structure was determined by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). ¹³C NMR spectrum of the AB suggested the main substitution occurred at the C-6 in the d-galactopyranose. Cryo-scanning electron microscopy (Cryo-SEM) showed that the aperture of AB was larger than that of agar. The thermal performance of AB decreased slightly, but this did not affect its performance. AB showed the highest relative antibacterial activity against Escherichia coli, S. aureus and Alternaria alternata, reaching 100 % (AB 20 g/L), 100 % (AB 40 g/L) and 19.35 % (7 d incubation), respectively. Moreover, the obtained AB possessed good emulsion stability. These antibacterial AB have broad application prospects in the field of fruit and vegetable preservation.

Preparation of macroporous rigid agarose microspheres by pre-crosslinking with cyclic anhydride

In this study, a new method for preparing macroporous rigid agarose microspheres was developed by one-step pre-crosslinking method with cyclic anhydride. Three different cyclic anhydrides, namely, maleic anhydride, succinic anhydride, and glutaric anhydride, were used to pre-crosslink agarose. The reaction temperature and the amount of cyclic anhydride in the pre-crosslinking process were optimized to endow agarose with stronger cross-linking. Under the optimal cross-linking condition, macroporous rigid agarose microspheres with homogeneous particle size were successfully obtained by adjusting emulsification method. Cryo-scanning electron microscopy was used to characterize the morphology of cross-linked agarose gel and microspheres. The addition of cyclic anhydride increased the gel aperture of cross-linked agarose microspheres, thereby making the macropores in the microspheres more dense and enhancing the mass transfer in the particles. Under low pressure, the cross-linked agarose microsphere column can effectively separate model proteins at linear flow rates three times higher than the agarose microsphere column. These results indicate that the developed agarose microspheres are a promising high-speed chromatographic medium.

Contributions of Women in Recent Research on Biopolymer Science

Nowadays, biopolymers are playing a fundamental role in our society because of the environmental issues and concerns associated with synthetic polymers. The aim of this Special Issue entitled ‘Women in Polymer Science and Technology: Biopolymers’ is highlighting the work designed and developed by women on biopolymer science and technology. In this context, this short review aims to provide an introduction to this Special Issue by highlighting some recent contributions of women around the world on the particular topic of biopolymer science and technology during the last 20 years. In the first place, it highlights a selection of important works performed on a number of well-studied natural polymers, namely, agar, chitin, chitosan, cellulose, and collagen. Secondly, it gives an insight into the discovery of new polysaccharides and enzymes that have a role in their synthesis and in their degradation. These contributions will be paving the way for the next generation of female and male scientists on this topic.

Comparison Study of an Optimized Ultrasound-Based Method versus an Optimized Conventional Method for Agar Extraction, and Protein Co-Extraction, from Gelidium sesquipedale

Agar is a hydrocolloid found in red seaweeds, which has been of industrial interest over the last century due to its multiple applications in the food, cosmetic, and medical fields. This polysaccharide, extracted by boiling for several hours, is released from the cell wall of red seaweeds. However, the environmental impact coming from the long processing time and the energy required to reach the targeted processing temperature needs to be reduced. In this study, a response surface methodology was employed to optimize both conventional extraction and ultrasound-assisted extractions. Two different models were successfully obtained (R² = 0.8773 and R² = 0.7436, respectively). Additionally, a further re-extraction confirmed that more agar could be extracted. Protein was also successfully co-extracted in the seaweed residues. Optimized conditions were obtained for both the extractions and the re-extraction of the two methods (CE: 6 h, 100 °C; and UAE: 1 h, 100% power). Finally, FT-IR characterization demonstrated that the extracts had a similar spectrum to the commercial agar. Compared to commercial samples, the low gel strength of the agar extracts shows that these extracts might have novel and different potential applications.

Benefits and Drawbacks of Ultrasound-Assisted Extraction for the Recovery of Bioactive Compounds from Marine Algae

The increase in life expectancy has led to the appearance of chronic diseases and interest in healthy aging, in turn promoting a growing interest in bioactive compounds (BCs) and functional ingredients. There are certain foods or products rich in functional ingredients, and algae are one of them. Algae consumption has been nominal in Europe until now. However, in recent years, it has grown significantly, partly due to globalization and the adoption of new food trends. With the aim of obtaining BCs from foods, multiple methods have been proposed, ranging from conventional ones, such as maceration or Soxhlet extraction, to more innovative methods, e.g., ultrasound-assisted extraction (UAE). UAE constitutes a novel method, belonging to so-called green chemistry, that enables the extraction of BCs requiring lower amounts of solvent and energy costs, preserving the integrity of such molecules. In recent years, this method has been often used for the extraction of different BCs from a wide range of algae, especially polysaccharides, such as carrageenans and alginate; pigments, including fucoxanthin, chlorophylls, or β-carotene; and phenolic compounds, among others. In this way, the application of UAE to marine algae is an efficient and sustainable strategy to pursue their deep characterization as a new source of BCs, especially suitable for vegetarian and vegan diets.