Development and validation of a screening system for characterizing and modeling biomass production from cyanobacteria and microalgae: Application to Arthrospira platensis and Haematococcus pluvialis

Development of a bench-scale photobioreactor with a novel recirculation system for continuous cultivation of microalgae

Microalgae cultivation can be used to increase the sustainability of carbon emitting processes, converting the CO₂ from exhaust gases into fuels, food and chemicals. Many of the carbon emitting industries operate in a continuous manner, for periods that can span days or months, resulting in a continuous stream of gas emissions. Biogenic CO₂ from industrial microbiological processes is one example, since in many cases it becomes unsustainable to stop these processes on a daily or weekly basis. To correctly sequester these emissions, microalgae systems must be operated under continuous constant conditions, requiring photobioreactors (PBRs) that can act as chemostats for long periods of time. However, in order to optimize culture parameters or study metabolic responses, bench-scale setups are necessary. Currently there is a lack of studies and design alternatives using chemostat, since most works focus on batch assays or semi-continuous cultures. Therefore, this work focused on the development of a continuous bench-scale PBR, which combines a retention vessel, a photocollector and a degasser, with an innovative recirculation system, that allows it to operate as an autotrophic chemostat, to study carbon sequestration from a biogenic CO₂-rich constant air stream. To assess its applicability, the PBR was used to cultivate the green microalga Haematococcus pluvialis using as sole carbon source the CO₂ produced by a coupled heterotrophic bacterial chemostat. An air stream containing ≈0.35 vol% of CO_2, was fed to the system, and it was evaluated in terms of stability, carbon fixation and biomass productivity, for dilution rates ranging from 0.1 to 0.5 d^-1. The PBR was able to operate under chemostat conditions for more than 100 days, producing a stable culture that generated proportional responses to the stimuli it was subjected to, attaining a maximum biomass productivity of 183 mg/L/d with a carbon fixation efficiency of ≈39% at 0.3 d^-1. These results reinforce the effectiveness of the developed PBR system, making it suitable for laboratory-scale studies of continuous photoautotrophic microalgae cultivation.

Arthrospira platensis Variants: A Comparative Study Based on C-phycocyanin Gene and Protein, Habitat, and Growth Conditions

This study aimed to map the differences between Arthrospira sp. and Arthrospira platensis strains and variants from the order Oscillatoriales at the gene and protein levels of C-phycocyanin alpha chain via multiple alignment, phylogenetic trees of species, and analysis of the nucleotide and amino acid composition of the studied sequences. The links between gene/protein and environmental features of the habitat or source of isolation were also investigated. Phycocyanin was extracted from three A. platensis strains: an Egyptian isolate cultivated in the laboratory under static conditions in a highly saline medium and two commercial products. The French commercial strain showed the highest extraction yield but the lowest C-phycocyanin purity, and the color intensity of the extracted pigment from the Egyptian isolate was significantly weaker than those of the two commercial strains. All the analyzed species and strains had GC content of more than 54.5% in C-phycocyanin alpha chain gene and showed high abundance of alanine, an amino acid encoded exclusively by GC-biased codons, in their protein. The frequencies of the acidic amino acids aspartic acid and glutamic acid were 5.2% and 5.0% on average, respectively, which were slightly higher than those of the basic residues (4.3% arginine, 0.6% histidine, and 5.0% lysine). Data relating to the isolation source of most of the analyzed species revealed harsh conditions, such as high alkalinity, salinity, CO2 saturation, and/or temperature. These findings may link the gene/protein of C-phycocyanin, which is one of the most important bioactive proteins of A. platensis, to the adaptation of this organism to harsh environmental conditions and associate the color of the pigment to cultivation conditions and/or isolation source.

Volatile Compounds, Fatty Acids Constituents, and Antimicrobial Activity of Cultured Spirulina (Arthrospira fusiformis) Isolated from Lake Mariout in Egypt

In this study, Arthrospira fusiformis previously isolated from Lake Mariout (Alexandria, Egypt) was cultivated in the laboratory using a medium for pharmaceutical grade Arthrospira, named as Amara and Steinbüchel medium. Hot water extract of the Egyptian Spirulina was prepared by autoclaving dried biomass in distilled water at 121°C for 15 min. This algal water extract was analyzed by GC-MS to evaluate its volatile compounds and fatty acids composition. The antimicrobial activity of phycobiliprotein extract from Arthrospira fusiformis using phosphate buffer was evaluated against thirteen microbial strains (two Gram-positive bacteria, eight Gram-negative bacteria, one yeast, and two filamentous fungi). The major components of fatty acids in the hot extract of Egyptian A. fusiformis were hexadecanoic acid (palmitic acid, 55.19%) and octadecanoic acid (stearic acid, 27.14%). The main constituents of its volatile compounds were acetic acid (43.33%) and oxalic acid (47.98%). The most potent antimicrobial effect of phycobiliprotein extract was obtained against two Gram-negative bacteria Salmonella typhi and Proteus vulgaris, filamentous fungus Aspergillus niger, and the pathogenic yeast Candida albicans (all of which showed MIC values of 58.1 μg/ml). Escherichia coli and Salmonella typhimurium come second in their susceptibility to the phycobiliprotein extract from Arthrospira fusiformis and Serratia marcescens and Aspergillus flavus are the least in susceptibility, with MIC values of 116.2 and 232.5 μg/ml, respectively, while phycobiliprotein extract has no antibacterial effect on methicillin-resistant as well as susceptible Staphylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Shigella sonnei. These findings confirmed the nutritional value of Egyptian A. fusiformis isolated from Lake Mariout and suggest the potential use of this strain as an ingredient in the cooking of some foods to increase the level of stearic acid and palmitic acid. Moreover, its effective antibacterial activities against some important and highly resistant to antibiotics bacterial pathogens in addition to its antifungal effects recommend the therapeutic use of its biomass.

Microalgae growth in ultra-thin steady-state continuous photobioreactors: assessing self-shading effects

To disclose the net effect of light on microalgal growth in photobioreactors, self-shading and mixing-induced light–dark cycles must be minimized and discerned from the transient phenomena of acclimation. In this work, we performed experiments of continuous microalgal cultivation in small-scale photobioreactors with different thicknesses (from 2 to 35 mm): working at a steady state allowed us to describe the effect of light after acclimation, while the geometry of the reactor was adjusted to find the threshold light path that can discriminate different phenomena. Experiments showed an increased inhibition under smaller culture light paths, suggesting a strong shading effect at thicknesses higher than 8 mm where mixing-induced light–dark cycles may occur. A Haldane-like model was applied and kinetic parameters retrieved, showing possible issues in the scalability of experimental results at different light paths if mixing-induced light–dark cycles are not considered. To further highlight the influence of mixing cycles, we proposed an analogy between small-scale operations with continuous light and PBR operations with pulsed light, with the computation of characteristic parameters from pulsed-light microalgae growth mathematical modeling.

Modeling and Optimizing the Effect of Light Color, Sodium Chloride and Glucose Concentration on Biomass Production and the Quality of Arthrospira platensis Using Response Surface Methodology (RSM)

Arthrospira platensis (Spirulina) biomass is a valuable source of sustainable proteins, and the basis for new food and feed products. State-of-the-art production of Spirulina biomass in open pond systems only allows limited control of essential process parameters, such as light color, salinity control, or mixotrophic growth, due to the high risk of contaminations. Closed photobioreactors offer a highly controllable system to optimize all process parameters affecting Spirulina biomass production (quantity) and biomass composition (quality). However, a comprehensive analysis of the impact of light color, salinity effects, and mixotrophic growth modes of Spirulina biomass production has not been performed yet. In this study, Response Surface Methodology (RSM) was employed to develop statistical models, and define optimal mixotrophic process conditions yielding maximum quantitative biomass productivity and high-quality biomass composition related to cellular protein and phycocyanin content. The individual and interaction effects of 0, 5, 15, and 30 g/L of sodium chloride (S), and 0, 1.5, 2, and 2.5 g/L of glucose (G) in three costume-made LED panels (L) where the dominant color was white (W), red (R), and yellow (Y) were investigated in a full factorial design. Spirulina was cultivated in 200 mL cell culture flasks in different treatments, and data were collected at the end of the log growth phase. The lack-of-fit test showed that the cubic model was the most suitable to predict the biomass concentration and protein content, and the two-factor interaction (2FI) was preferred to predict the cellular phycocyanin content (p > 0.05). The reduced models were produced by excluding insignificant terms (p > 0.05). The experimental validation of the RSM optimization showed that the highest biomass concentration (1.09, 1.08, and 0.85 g/L), with improved phycocyanin content of 82.27, 59.47, 107 mg/g, and protein content of 46.18, 39.76, 53.16%, was obtained under the process parameter configuration WL4.28S2.5G, RL10.63S1.33G, and YL1.00S0.88G, respectively.