Effects of LED lighting on Nannochloropsis oceanica grown in outdoor raceway ponds

Sequential two-stage cultivation system using novel microalga consortia for treatment of municipal wastewater and simultaneous biomass production: Sustainable environmental management

Monoculture-based microalgae cultivation systems to treat wastewater are well-reported. Despite that, this method has some limitations in terms of nutrient removal potential, environment adaptation, and low biomass productivity. Conversely, microalgae co-cultivation and a two-stage sequential cultivation system (TSSCS) recently emerged as a promising approach to improve the treatment process and biomass productivity through better adaptation to the environment. However, no outdoor large-scale experiments were reported using this approach which hinders the viability of the process. Thus, in the present study, a sequential two-stage large-scale outdoor novel microalgae consortia experiment was developed. In first stage consortia-assisted sequential cultivation, two ratios of Tetraselmis indica (TS) and one ratio of Picochlorum sp. (PC) (2 TS:1 PC) were cultivated in a 1000-L pond containing 75%-municipal wastewater (MWW) + 25%-ASN-III, while in the second stage, 2 PC:1 TS was cultivated in two different ponds, and each containing 375-L 2 TS:1 PC-treated water + 375-L ASN-III. Outdoor parameters and nutrient removal efficiency (NRE), biomass, and biomolecule productivity such as lipid, photosynthetic pigments, astaxanthin, and β-carotene were quantified, and cost analysis was performed. At the end of the first and second stages, 2 TS:1 PC and 2 PC:1 TS showed maximum NRE of COD (68.71 and 86.40%), TN (66.98 and 94.73%), and TP (82.70 and 94.36%), respectively. Moreover, 2 TS:1 PC and 2 PC:1 TS Pond 1 and 2 produced maximum dry biomass production; 2.41 and ∼2.54 g/L contained lipid content; 36.89 and 34.90% that have 86.50 and 55.79% FAME content respectively. Similarly, 2 TS:1 PC and 2 PC:1 TS biomass exhibited valuable pigments production of astaxanthin i.e., 0.56 and 0.35 mg/g, and β-carotene; 4.65 and 2.82 mg/g, respectively. The cost analysis suggested that only microalgal-based MWW treatment was unfeasible, while valorization of produced biomass into co-products could offset the operation costs and could allow the option for the microalgal-based sustainable approach for the treatment of MWW and recovery of valuable resources.

Recent progress on converting CO2 into microalgal biomass using suspended photobioreactors

Inhomogeneous light distribution and poor CO₂ transfer capacity are two critical concerns impeding microalgal photosynthesis in practical suspended photobioreactors (PBRs). To provide valuable guidance on designing high-performance PBRs, recent progress on enhancing light and CO₂ availabilities is systematically summarized in this review. Particularly, for the first time, the strategies on elevating light availability are classified and discussed from the perspectives of increasing incident light intensity, introducing internal illumination, optimizing flow field, regulating biomass concentrations, and enlarging illumination surface areas. Meanwhile, the strategies on enhancing CO₂ light availability are outlined from the aspects of generating smaller bubbles, extending bubbles residence time, and facilitating CO₂ dissolution using extra additives. Given the microalgal biomass production using current PBRs are still suffering from low productivity and economic feasibility, the possible future directions for PBRs implementation and development are presented. Altogether, this review is beneficial to furthering development of PBRs as a practical technology.