Composition and ecology of bacterial and archaeal communities in anaerobic reactor fed with residual glycerol

Microaeration promotes volatile siloxanes conversion to methane and simpler monomeric products

The ubiquitous use of volatile siloxanes in a myriad of product formulations has led to a widespread distribution of these persistent contaminants in both natural ecosystems and wastewater treatment plants. Microbial degradation under microaerobic conditions is a promising approach to mitigate D4 and D5 siloxanes while recovering energy in wastewater treatment plants. This study examined D4/D5 siloxanes biodegradation under both anaerobic and microaerobic conditions ( [Formula: see text]  = 0, 1, 3 %) using wastewater sludge. Results show that the use of microaeration in an otherwise strictly anaerobic environment significantly enhances siloxane conversion to methane. 16S rRNA gene sequencing identified potential degraders, including Clostridium lituseburense, Clostridium bifermentans and Synergistales species. Furthermore, chemical analysis suggested a stepwise siloxane conversion preceding methanogenesis under microaerobic conditions. This study demonstrates the feasibility of microaerobic siloxane biodegradation, laying groundwork for scalable removal technologies in wastewater treatment plants, ultimately highlighting the importance of using bio-based approaches in tackling persistent pollutants.

Two problems in one shot: Vinasse and glycerol co-digestion in a thermophilic high-rate reactor to improve process stability even at high sulfate concentrations

Anaerobic co-digestion (AcoD) of sugarcane vinasse and glycerol can be profitable because of the destination of two biofuel wastes produced in large quantities in Brazil (ethanol and biodiesel, respectively) and the complementary properties of these substrates. Thus, the objective of this study was to assess the effect of increasing the organic loading rate (OLR) from 2 to 20 kg COD m^-3 d^-1 on the AcoD of vinasse and glycerol (50 %:50 % on a COD basis) in a thermophilic (55 °C) anaerobic fluidized bed reactor (AFBR). The highest methane production rate was observed at 20 kg COD m^-3 d^-1 (8.83 L CH₄ d^-1 L^-1), while the methane yield remained stable at around 265 NmL CH₄ g^-1 COD_rem in all conditions, even when influent vinasse reached 1811 mg SO₄^2- L^-1 (10 kg COD m^-3 d^-1). Sulfate was not detected in the effluent. Bacterial genera related to sulfate removal, such as Desulfovibrio and Desulfomicrobium, were observed by means of shotgun metagenomic sequencing at 10 kg COD m^-3 d^-1, as well as the acetoclastic archaea Methanosaeta and prevalence of genes encoding enzymes related to acetoclastic methanogenesis. It was concluded that process efficiency and methane production occurred even in higher sulfate concentrations due to glycerol addition.

Methanogenic Microorganisms in Industrial Wastewater Anaerobic Treatment

Over the past decades, anaerobic biotechnology is commonly used for treating high-strength wastewaters from different industries. This biotechnology depends on interactions and co-operation between microorganisms in the anaerobic environment where many pollutants’ transformation to energy-rich biogas occurs. Properties of wastewater vary across industries and significantly affect microbiome composition in the anaerobic reactor. Methanogenic archaea play a crucial role during anaerobic wastewater treatment. The most abundant acetoclastic methanogens in the anaerobic reactors for industrial wastewater treatment are Methanosarcina sp. and Methanotrix sp. Hydrogenotrophic representatives of methanogens presented in the anaerobic reactors are characterized by a wide species diversity. Methanoculleus sp., Methanobacterium sp. and Methanospirillum sp. prevailed in this group. This work summarizes the relation of industrial wastewater composition and methanogen microbial communities present in different reactors treating these wastewaters.

Up-Flow Anaerobic Sludge Blanket (UASB) Technology for Energy Recovery: A Review on State-of-the-Art and Recent Technological Advances

Up-flow anaerobic sludge blanket (UASB) reactor belongs to high-rate systems, able to perform anaerobic reaction at reduced hydraulic retention time, if compared to traditional digesters. In this review, the most recent advances in UASB reactor applications are critically summarized and discussed, with outline on the most critical aspects for further possible future developments. Beside traditional anaerobic treatment of soluble and biodegradable substrates, research is actually focusing on the treatment of refractory and slowly degradable matrices, thanks to an improved understanding of microbial community composition and reactor hydrodynamics, together with utilization of powerful modeling tools. Innovative approaches include the use of UASB reactor for nitrogen removal, as well as for hydrogen and volatile fatty acid production. Co-digestion of complementary substrates available in the same territory is being extensively studied to increase biogas yield and provide smooth continuous operations in a circular economy perspective. Particular importance is being given to decentralized treatment, able to provide electricity and heat to local users with possible integration with other renewable energies. Proper pre-treatment application increases biogas yield, while a successive post-treatment is needed to meet required effluent standards, also from a toxicological perspective. An increased full-scale application of UASB technology is desirable to achieve circular economy and sustainability scopes, with efficient biogas exploitation, fulfilling renewable energy targets and green-house gases emission reduction, in particular in tropical countries, where limited reactor heating is required.

The microbiome driving anaerobic digestion and microbial analysis

The microbiome residing in anaerobic digesters drives the anaerobic digestion (AD) process to convert various feedstocks to biogas as a renewable source of energy. This microbiome has been investigated in numerous studies in the last century. The early studies used cultivation-based methods and analysis to identify the four guilds (or functional groups) of microorganisms. Molecular biology techniques overcame the limitations of cultivation-based methods and allowed the identification of unculturable microorganisms, revealing the high diversity of microorganisms involved in AD. In the past decade, omics technologies, including metataxonomics, metagenomics, metatranscriptomics, metaproteomics, and metametabolomics, have been or start to be used in comprehensive analysis and studies of biogas-producing microbiomes. In this chapter, we reviewed the utilities and limitations of these analysis methods, techniques, and technologies when they were used in studies of biogas-producing microbiomes, as well as the new information on diversity, composition, metabolism, and syntrophic interactions of biogas-producing microbiomes. We also discussed the current knowledge gaps and the research needed to further improve AD efficiency and stability.