Optimization of a method based on micro-matrix solid-phase dispersion (micro-MSPD) for the determination of PCBs in mussel samples

Matrix Solid-Phase Dispersion Procedure for Determination of Antibiotics and Metabolites in Mussels: Application in Exposure Bioassays

The presence of antibiotics in seafood for human consumption may pose a risk for consumers. Furthermore, some marine organisms, such as mussels, can result in appropriate bioindicators of marine contamination. In this work, a multiresidue analytical methodology suitable for the determination of antibiotics and metabolites in mussels is proposed. The target compounds include three sulphonamides and trimethoprim (TMP) and six of their main metabolites. Sample treatment involves extraction and clean-up in a single step using matrix solid-phase dispersion with acetonitrile. Analytical determination was carried out by liquid chromatography-tandem mass spectrometry. Good linearity (R2 > 0.99), accuracy (from 80.8 to 118%), and limits of quantification (lower than 5 ng g-1 (dry matter, dm)) were obtained for all selected compounds. The method was applied to the determination of antibiotics in mussel samples from an exposure assay with contaminated seawater with TMP and sulfamethoxazole (SMX). Both antibiotics were detected in the analysed samples with concentrations up to 77.5 ng g-1 dm. TMP was bioconcentrated to a higher extent than SMX, attributable to its higher hydrophobicity. None of the metabolites were detected. These results demonstrate that Mytilus galloprovincialis is a suitable bioindicator to assess marine pollution.

Multivariate Optimization and Validation of a Modified QuEChERS Method for Determination of PAHs and PCBs in Grilled Meat by GC-MS

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are recognized as carcinogens and mutagenic food contaminants that threaten public health. As for food safety aspects, control of these contaminants in processed and fatty food is necessary. In this study, eleven factors were screened by the Plackett-Burman design, and four variables were chosen to optimize with the central composite design (CCD) for the improvement of extraction and cleanup procedures of these food contaminants. The optimized variables include 5 g of sample, 2 mL mixture of 2/2/1 ethyl acetate/acetone/isooctane, 1.6 g of ammonium formate, 0.9 g of sodium chloride, and 0.25 g of sorbent Z-Sep+. A 5 min cleanup vortex time with the spike calibration curve strategy, analyzed by gas chromatography-mass spectrometry (GC-MS), led to the validated limits of quantification (LOQs) for 16 PAHs and 36 PCBs of 0.5-2 and 0.5-1 ng/g, respectively, and recoveries of 72-120%, with an average relative standard deviation (%RSD) of 17, for PAHs, and 80-120%, with an %RSD of 3, for PCBs. The method introduces excellent accuracy, precision, and efficiency, and minimizes matrix effects, and ensures a control procedure, adopted with international standards, for food authorities to determine the contaminants of interest in processed meat, and consequently, prevent food-borne disease to improve public health indices.

Optimization of a new multi-reagent procedure for quantitative mussel digestion in microplastic analysis

Over the last few years, different digestion protocols have been proposed to extract microplastics from mussels, an important product from aquaculture and a relevant economic resource, always scrutinized as a potential pollutant concentrator. In this study, a full factorial experimental design technique has been employed to achieve efficiency in removing biological materials while maximizing the recoveries of five common microplastics (polyethylene, polystyrene, polyethylene terephthalate, polypropylene and polyamide). A robust setpoint was calculated, 2.5% potassium hydroxide at 60 °C for 3 h with 5% hydrogen peroxide and 2.7% of methanol, permitting the quantitative digestion of mussel tissues and recovery of microplastics. These experimental conditions were successfully used to digest whole mussels bought from a local market, which possess high levels of microplastic contamination (41 items/g dry weight). The results highlight the importance of optimizing protocols to develop robust, easy to use and cheap quantitative approaches for analysing microplastic accumulation in edible organisms.

Fast determination of phthalates in mussel samples by micro-matrix solid-phase dispersion (micro-MSPD) coupled with GC–MS/MS

A fast, effective and low cost sample preparation method based on miniaturized matrix solid-phase dispersion (micro-MSPD) combined with gas chromatography coupled to tandem triple-quadrupole-mass spectrometry (GC–MS/MS) has been developed for the determination of six phthalate diesters (DMP, DEP, DBP, BzBP, DEHP and DnOP) in mussel samples. The six target compounds have been included in the list of priority pollutants by United States Environmental Protection Agency. The extraction step was optimized on real spiked mussel coming from Galician Rías by means of a factorial design. The final procedure involved the use of 0.45 g of sample, 0.5 g of dispersant agent (Florisil) and 3 mL of organic solvent (ethyl acetate). The optimized method was validated giving satisfactory analytical performance, low detection limits (0.09 to 6.73 ng g−1 dw) and high recoveries (93 and 114%). The validated method was applied to four real mussel samples coming from Galician Rías.

Occurrence of common plastic additives and contaminants in mussel samples: Validation of analytical method based on matrix solid-phase dispersion

A new matrix solid-phase dispersion (MSPD) extraction methodology, combined with high-performance liquid chromatography equipped with a diode-array detector, was developed and validated for the simultaneous determination of 10 compounds in mussels from Galician Rias (Spain). These pollutants are compounds commonly used for plastic production as additives, as well as common plastic contaminants. The compounds selected were bisphenol-A, bisphenol-F, bisphenol-S, nonylphenol-9, nonylphenol, diethyl phthalate, dibutyl phthalate, di-2-ethylhexyl phthalate, dichlorodiphenyltrichloroethane, dichlorodiphenyldichloroethane, and dichlorodiphenyldichloroethylene. The parameters affecting the MSPD extraction efficiency such as the type of sorbent, mass sample-sorbent ratio, and extraction solvent were optimised. The proposed method provided satisfactory quantitative recoveries (80-100%), with relative standard deviations lower than 7%. In all cases, the matrix-matched calibration curves were linear in the concentration range of 0.32-120.00 µg/kg, with quantification limits of 0.25-16.20 µg/kg. The novel developed MSPD-high-performance liquid chromatography methodology provided good sensitivity, accuracy, and repeatability for quality control analysis in mussels.

Determination of multi-class polyaromatic compounds in sediments by a simple modified matrix solid phase dispersive extraction

A simple, efficient matrix solid phase dispersive extraction (MSPD) method was optimised to analyse simultaneously polycyclic aromatic hydrocarbons (PAHs) and polychlorobiphenyls (PCBs) from sediments, and was compared to microwave-assisted extraction (MAE). New dispersing agents were tested to improve MSPD extraction. 3-chloropropyl-bonded silica particles, in addition to Florisil, increased significantly the polyaromatics desorption capacity. A compromise was found for eluting both families of compounds from sediments, using a small volume of hexane/acetone. Low procedural detection limits could be reached (0.06-0.22 ng g^-1 and 0.3-1.1 ng g^-1 for PAHs and PCBs, respectively). Mean total extraction recoveries were good for PAHs (>67%, depending on the sediment) and for PCBs (>89%), with good precision (6-9% and 4-10% inter-day precision for PAHs and PCBs, respectively). Higher recoveries for PCBs could be reached in comparison with formerly developed sonication or Soxhlet extraction methods, but also with MAE. MSPD offered significant decrease of sample amount, of solvent consumption and allowed more efficient cleaning of the sediment matrix, leading to less matrix effects compared to MAE, removing lots of interfering compounds without additional purification step. The robustness of the MSPD methodology could be demonstrated extracting quantitatively sediments from different sources and with various mineralogical characteristics.

Balls-in-tube matrix solid phase dispersion (BiT-MSPD): An innovative and simplified technique for multiresidue determination of pesticides in fruit samples

Sample preparation of complex matrices, like food samples, continues to be a challenge demanding great effort for improvements. In this study, a new technique named balls-in-tube matrix solid-phase dispersion (BiT-MSPD) is proposed based on a simplification of the conventional MSPD technique being all sample preparation performed directly in a closed extraction tube with the assistance of steel balls. An innovative method using BiT-MSPD was successfully established for the determination of 133 pesticide residues in apple, peach, pear and plum by ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS). Several sorbents were evaluated as solid support in different proportions with the sample. The homogenization step using mortar, glass rod or steel balls, with methanol and acetonitrile as extraction solvent, was evaluated. Vortex and ultrasound assisted extractions were also tested. Best results were obtained with C18, homogenization with steel balls, acetonitrile as solvent and ultrasound assisted extraction. Validation presented adequate trueness and precision results for the evaluated pesticides with recovery results ranging from 72 to 113% and RSD ≤ 17%. Practical limit of detection (LOD) and quantification (LOQ) for the compounds were 3 and 10 µg kg^-1, respectively. The developed method proved to be easier and faster to perform than the MSPD, considering that extraction and clean-up are performed in the same tube without the need to transfer to cartridges, recipients or to use a separate clean-up step. The proposed BiT-MSPD technique was successfully applied to fruit samples and has great potential to be applied in other matrices, like cereals and meat, since the steel balls promote an efficient sample dispersion and extraction of pesticides. The BiT-MSPD permit a fully automation of the entire sample preparation step.

Development and validation of a subcritical 1,1,1,2-tetrafluoroethane extraction technique: Gas chromatography-mass spectrometry method for the simultaneous determination of polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and polybrominated biphenyl ethers in aquatic products

A simple, rapid, and green method was developed for the simultaneous analysis of polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and polybrominated biphenyl ethers in aquatic products using subcritical 1,1,1,2-tetrafluoroethane extraction coupled with gas chromatography and mass spectrometry. Effects of the extraction temperature, pressure, and cosolvent volume on the extraction efficiency were investigated by extracting spiked oyster samples. The results show that the maximum extraction efficiency was obtained at 40°C, 12 MPa, and a cosolvent (dichloromethane) volume of 5.0 mL. Under these conditions, the calibration curves had good linearity with square of the correlation larger than 0.998 in the concentration range of 5-800 ng/mL; limit of detection and limit of quantitation were 0.16-2.83 and 0.55-9.43 ng/g, respectively. At spiked levels of 10, 30, and 50 ng/g, the average recoveries were 70.4-80.4% for polycyclic aromatic hydrocarbons, 74.0-83.6% for polychlorinated biphenyls, and 66.9-78.0% for polybrominated biphenyl ethers, with average relative standard deviations of less than 16.3%. The established method has no significant differences in recovery compared to traditional methods and is suitable for the analysis of real samples.