Stabilization of Uranium(VI) at Low pH by Fungal Metabolites: Applications in Environmental Biotechnology

Effective biosorption of uranium from aqueous solution by cyanobacterium Anabaena flos-aquae

Anabaena flos-aquae, a typical species of cyanobacterial bloom, was employed as a useful biosorbent for uranium removal. Batch experiments were conducted to examine the effects of different parameters on the uranium uptake amount of Anabaena flos-aquae. The maximum adsorption capacity of 196.4 mg/g was obtained under the optimized experimental conditions. The calculations of kinetic and thermodynamic results proved the adsorption process was endothermic, chemisorption, and spontaneous. The adsorption of uranium onto Anabaena flos-aquae was better defined by the Langmuir model, which indicated the process was a monolayer sorption. In addition, the characterization of the biosorbent before and after uranium sorption implied that the dominant functional groups participated in the uranium adsorption process were hydroxyl, amino, and carboxyl. In conclusion, the environmentally friendly and biocompatible characteristics of Anabaena flos-aquae suggest that it can be a promising biosorbent for uranium removal.

Resistant fungi isolated from contaminated uranium mine in Brazil shows a high capacity to uptake uranium from water

The Osamu Utsumi uranium mine occupies a 20 km² area in the city of Caldas, which is located in the state of Minas Gerais, Brazil. Since mining activities ended at Osamu Utsumi 24 years ago, the surrounding area has become contaminated by acid effluents containing high concentrations of uranium. Thus, the aim of this study was to assess the uranium bioremediation capacity of 57 fungi isolated from the mine area. In tolerance tests, 38% (22) of the fungal isolates were considered tolerant to uranium, including 10 Penicillium species. At a uranium concentration of 2000 mg L^-1 48 fungi did not exhibit mycelial growth index inhibition. Minimal inhibitory concentration (MIC) analysis showed growth of 25 fungi above a uranium concentration of 8000 mg L^-1. At high uranium concentrations, some fungi (i.e., Talaromyces amestolkiae and Penicillium citrinum) showed morphological changes and pigment (melanin) production. Among the fungal isolates, those considered to be more tolerant to uranium were isolated from soil and sediment samples containing higher concentrations of heavy metal. When comparing the results of resistance/tolerance tests with those for uranium biosorption capacity, we concluded that the fungi isolated from the Osamu Utsumi mine with the best potential for uranium bioremediation were Gongronella butleri, Penicillium piscarium, Penicillium citrinum, Penicillium ludwigii, and Talaromyces amestolkiae. Biosorption tests with live fungal biomass showed that 11 species had a high potential for uranium uptake from contaminated water.

Equilibrium, thermodynamic and kinetic investigations for biosorption of uranium with green algae (Cladophora hutchinsiae)

Removal of toxic chemicals from environmental samples with low-cost methods and materials are very useful approach for especially large-scale applications. Green algae are highly abundant biomaterials which are employed as useful biosorbents in many studies. In the present study, an interesting type of green algae, Cladophora hutchinsiae (C. hutchinsiae) was used for removal of highly toxic chemical such as uranium. The pH, biosorbent concentration, contact time and temperature were optimized as 5.0, 12 g/L, 60 min and 20 °C, respectively. For the equilibrium calculations, three well known isotherm models (Langmuir, Freundlich and Dubinin-Radushkevich) were employed. The maximum biosorption capacity of the biosorbent was calculated as about 152 mg/g under the optimum batch conditions. The mean energy of biosorption was calculated as 8.39 kJ/mol from the D-R biosorption isotherm. The thermodynamic and kinetic characteristics of biosorption were also investigated to explain the nature of the process. The kinetic data best fits the pseudo-second-order kinetic model with a regression coefficient of >0.99 for all studied temperatures. The calculated ΔH° and ΔG° values showed that the biosorption process is exothermic and spontaneous for temperatures between 293 and 333 K. Furthermore, after seven cycling process, the sorption and desorption efficiencies of the biosorbent were found to be 70, and 58%, respectively meaning that the biosorbent had sufficiently high reusability performance as a clean-up tool.

Antifungal properties of silver nanoparticles against indoor mould growth

The presence of moulds in indoor environments causes serious diseases and acute or chronic toxicological syndromes. In order to inhibit or prevent the growth of microorganisms on building materials, the disruption of their vital processes or the reduction of reproduction is required. The development of novel techniques that impair the growth of microorganisms on building materials is usually based on silver nanoparticles (AgNPs). It makes them an alternative to other biocides. AgNPs have proven antibacterial activity and became promising in relation to fungi. The aim of the study was to assess growth and morphology of mycelia of typical indoor fungal species: Penicillium brevicompactum, Aspergillus fumigatus, Cladosporium cladosporoides, Chaetomium globosum and Stachybotrys chartarum as well as Mortierella alpina, cultured on agar media. The antifungal activity of AgNPs was also tested in relation to C. globosum and S. chartarum grown on the surface of gypsum drywall. It was found that the presence of AgNPs in concentrations of 30-200mg/l significantly decreased the growth of fungi. However, in the case of M. alpina, AgNPs stimulated its growth. Moreover, strong changes in moulds morphology and colour were observed after administration of AgNPs. Parameters of conidiophores/sporangiophores varied depending on mould region and changed significantly after treatment with AgNPs. The experiments have shown antifungal properties of AgNPs against common indoor mould species. Their application to building materials could effectively protect indoor environments from mould development. However, consideration must be given to the fact that the growth of some fungal strains might be stimulated by AgNPs.