One-pot synthesis of sodium lauryl sulfate-loaded polyacrylonitrile solid-phase extractor for investigating the adsorption behavior of radioactive strontium(II) from aqueous solutions

New Process for the Sulfonation of Algal/PEI Biosorbent for Enhancing Sr(II) Removal from Aqueous Solutions-Application to Seawater

Sulfonic resins are highly efficient cation exchangers widely used for metal removal from aqueous solutions. Herein, a new sulfonation process is designed for the sulfonation of algal/PEI composite (A*PEI, by reaction with 2-propylene-1-sulfonic acid and hydroxylamine-O-sulfonic acid). The new sulfonated functionalized sorbent (SA*PEI) is successfully tested in batch systems for strontium recovery first in synthetic solutions before investigating with multi-component solutions and final validation with seawater samples. The chemical modification of A*PEI triples the sorption capacity for Sr(II) at pH 4 with a removal rate of up to 7% and 58% for A*PEI and SA*PEI, respectively (with SD: 0.67 g L^-1). FTIR shows the strong contribution of sulfonate groups for the functionalized sorbent (in addition to amine and carboxylic groups from the support). The sorption is endothermic (increase in sorption with temperature). The sulfonation improves thermal stability and slightly enhances textural properties. This may explain the fast kinetics (which are controlled by the pseudo-first-order rate equation). The sulfonated sorbent shows a remarkable preference for Sr(II) over competitor mono-, di-, and tri-valent metal cations. Sorption properties are weakly influenced by the excess of NaCl; this can explain the outstanding sorption properties in the treatment of seawater samples. In addition, the sulfonated sorbent shows excellent stability at recycling (for at least 5 cycles), with a loss in capacity of around 2.2%. These preliminary results show the remarkable efficiency of the sorbent for Sr(II) removal from complex solutions (this could open perspectives for the treatment of contaminated seawater samples).

Scavenging of hexavalent chromium from aqueous solution by Macadamia nutshell biomass modified with diethylenetriamine and maleic anhydride

Based on the premise that aqueous anions of hexavalent chromium (Cr(VI)) are capable of electrostatic interaction with cationic and polar active sites, acid-washed Madacamia nutshell biomass was sequentially treated with diethylenetriamine (DETA) and maleic anhydride (MA) to graft poly(diethylenetriamine-co-maleic anhydride). By displaying a new peak at 1685 cm^-1 ascribed to amide CO stretching vibrations, Fourier transform infrared spectroscopy highlighted the formation of amide groups through reaction of DETA with carboxyl groups on the biomass surface. Scanning electron microscopic images of the MA-modified biomass displayed polymeric growths attributed to copolymerization of DETA with MA. The polar and ionizable amide and amine groups of the grafted copolymer endowed the adsorbent with Cr(VI) removal capabilities over a wide pH range demonstrated by removal efficiencies between 70.9% and 81.7% in the pH 1.6 to pH 10.0 range for the treatment of 20 mL solutions containing 100 mg L^-1 Cr(VI) with 200 mg of adsorbent. Conformity of the adsorption isotherm data to the Freundlich model revealed the heterogeneous nature of the adsorbent surface, which comprised a variety of functional groups capable of interaction with Cr(VI) species in solution. The Sips isotherm model provided the best fit to the equilibrium experimental data, and the adsorption capacity was 779.1 mg g^-1 at pH 1.6, room temperature and an adsorbent dosage of 5.0 g L^-1. The findings indicate that Cr(VI) adsorption onto diethylenetriamine and maleic anhydride modified Madacamia nutshell biomass is a promising option for Cr(VI) removal from aqueous solutions.

Isotherm and Kinetic Modeling of Strontium Adsorption on Graphene Oxide

In this study, graphene oxide (GO) was synthesized using Hummers method. The synthesized GO was characterized using field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) nitrogen adsorption. The analyses confirmed the presence of oxygen functional groups (C=O and C-O-C) on the GO surface. These oxygen functional groups act as active sites in the adsorption Sr (II). The BET analysis revealed the surface area of GO of 232 m²/g with a pore volume of 0.40 cm³/g. The synthesized GO was used as an adsorbent for removing Sr (II) from aqueous solutions. The adsorption equilibrium and kinetic results were consistent with the Langmuir isotherm model and the pseudo-second-order kinetic model. A maximum strontium adsorption capacity of 131.4 mg/g was achieved. The results show that the GO has an excellent adsorption capability for removing Sr (II) from aqueous solutions and potential use in wastewater treatment applications.

Hydroxyapatite nanoparticle functionalized activated carbon particle electrode that removes strontium from spiked soils in a unipolar three-dimensional electrokinetic system

Biohazard performance of Sr radionuclide can be significantly magnified by its release from the contaminated sedimentation. In this study, hydroxyapatite nanoparticle-functionalized activated carbon electrode (AC-HAP) was synthesized and stacked to the cathode compartment of the electrokinetic (EK) system to develop a unipolar three-dimensional (3D) electrochemical process for Sr²⁺ removal from spiked soils. Sr²⁺ adsorption by AC-HAP can be fitted by the pseudo-first-order and pseudo-second-order kinetic models and the Langmuir, Freundlich, and Temkin isotherm models. The largest monolayer adsorption capacity of AC-HAP of 69.49 mg g^-1 was evaluated in the pH range of 10-12 and at 40 °C. 3D EK further intensified the adsorption process of AC-HAP and the corresponding Sr²⁺ removal from aqueous environments. Voltage gradients and proposing time had a significant effect on the migration and transmission of Sr²⁺ in the electrolyzer. The influence of competitive ions on Sr²⁺ removal in the stock solutions followed Al³⁺ < Mg²⁺ < K⁺ < Na⁺ < Ca²⁺ while followed Al³⁺ < Na⁺ < K⁺ < Mg²⁺ < Ca²⁺ in 3D EK. The first three cycles for AC-HAP had taken roughly 50% of the reusability percentage. Sr²⁺ removal from spiked samples in 3D EK was achieved by acid dissolution, electromigration, and selective uptake on particle electrode.