MHD 3D free convective flow of nanofluid over an exponentially stretching sheet with chemical reaction

Unsteady Electro-Hydrodynamic Stagnating Point Flow of Hybridized Nanofluid via a Convectively Heated Enlarging (Dwindling) Surface with Velocity Slippage and Heat Generation

In (Al2O3-Cu/H2O) hybridized nanofluid (HYNF) is an unsteady electro-hydrodynamic stagnation point flow. A stretchable (shrinkable) surface that was convectively heated was studied in the past. In addition to the traditional nonslip surface, the heat generating (absorbing) and the velocity slippage constraints are deliberated in this research. An obtained nonlinear scheme is resolved by the homotopy analysis method. Governing parameters are the electric field parameters, that is, the dimensionless parameters including the magnetic parameter, Prandtl quantity, heat generating factor, Eckert quantity, and unsteady factor. We discuss in detail the effects of these variables on the movement of problems and thermal transmission characteristics. Increasing the values of the magneto and electric force parameters increased the temperature. Increasing the Prandtl number lowered the temperature. For the Eckert parameter, an increase in temperature was recognized. The symmetric form of the geometry model displayed improved the fluid flow by the same amount both above and below the stagnation streamline, while it decreased the flow pressure by the same level. The more heat source uses to increase the temperature of the HYNF over the entire area, the more heat is supplied to the plate, but with a heat sink, the opposite effect is observed.

Magneto-Hydrodynamic Flow above Exponentially Stretchable Surface with Chemical Reaction

This article is focused on investigating the convective magneto-hydrodynamic single-phase flow for comparative analysis of two different base fluids above an exponentially stretchable porous surface under the effect of the chemical reaction. The Buongiorno fluid model is incorporated to observe the Thermophoresis and Brownian diffusion in this study. Boussinesq approximation for temperature and concentration are accounted for flow to be naturally convective. In this study, water and ethanol are assumed for comparative analysis. Additionally, to achieve the outcomes of the designed three-dimensional flow boundary value, problem technique is employed to simulate the problem in MATLAB. Increase in the magnetic field, thermophoresis diffusion, temperature exponent, and Prandtl number expand thermal boundary, whereas contraction is observed with an increase in porosity. Shear stress rates in respective directions have decreased with an increase in the stretching ratio of the surface. Moreover, through comparison, reasonably enhanced Nusselt number is observed for water under influence of study parameters while the Nusselt number abruptly decreases for ethanol. High mass coefficients are observed for both examined fluids.

A New Explicit Numerical Schemes for Time-Dependent PDEs with Application to Pressure Driven Fluid Flow in a Rectangular Duct

A modified class of temporal discretization schemes for partial differential equations (PDEs) is proposed, explicit and second to fifth-order accurate in time. In time, the stability region of the proposed modified second-order scheme is larger than the standard second-order Adams–Bashforth method constructed on two time levels. A modification made for the Du Fort–Frankel method was also implemented in the proposed second-order scheme, which permits the little larger stability region, but the scheme becomes first-order accurate. Since the Du Fort–Frankel method cannot be employed without a modification of averaging in time levels, the proposed second-order scheme can be used without any modification. The proposed modified scheme with different orders in space and second orders in time was implemented for heat and mass transfer of chemically reactive fluid flow in a rectangular duct. The flow is generated due to applying different pressure gradients. The contour plots of velocity, temperature, and concentration profiles are portrayed at different pressure gradients; Péclet number in heat transfer, Péclet number in mass transfer, reaction parameter, and at different times. In addition, stability and convergence conditions for the considered system of linear and non-linear PDEs consisting of non-dimensional momentum, energy, and concentration equations were found for two cases. The displayed graphs depict the transfer of heat in the fluid, which rises due to heated boundaries, and the transfer of mass in the fluid at various moments. Classical models can be solved using the proposed method, which has a faster convergence rate than the standard or classical approach. This approach is illustrated through computer simulations that demonstrate its key computational features. It is believed that the data presented in this study will serve as a useful source for future fluid flow investigations to be conducted in an industrial setting within an enclosed area.

Unsteady Magnetohydrodynamic Convective Flow of a Nanoliquid via a Radially Stretched Riga Area via Optimal Homotopy Analysis Method

This article presents the investigation of the mechanism of mass and heat transport of an unsteady incompressible electrically conducting viscous convective nanoliquid through a radially stretching Riga plate with viscous dissipation, velocity slip, Brownian motion, Thermophoresis parameter, and first-order chemical reaction. The optimal homotopy analysis technique has been utilized to compute the solutions for the differential equations system after using the similarity variables to the governing flow equations. For physical clarification, the acquired outcomes are illustrated graphically and also in the form of tables. These graphs and tables are used to exhibit physical quantities, namely, Sherwood number, skin friction coefficient, concentration, Nusselt number, temperature and velocity. One of the significant outcomes of the current scrutiny is velocity profile improves for rising values of Hartman number, and this investigation finds several applications in various fields of automobile industries and engineering.

Numerical Analysis of Boundary Layer Flow Adjacent to a Thin Needle in Nanofluid with the Presence of Heat Source and Chemical Reaction

The steady boundary layer flow of a nanofluid past a thin needle under the influences of heat generation and chemical reaction is analyzed in the present work. The mathematical model has been formulated by using Buongiornos’s nanofluid model which incorporates the effect of the Brownian motion and thermophoretic diffusion. The governing coupled partial differential equations are transformed into a set of nonlinear ordinary differential equations by using appropriate similarity transformations. These equations are then computed numerically through MATLAB software using the implemented package called bvp4c. The influences of various parameters such as Brownian motion, thermophoresis, velocity ratio, needle thickness, heat generation and chemical reaction parameters on the flow, heat and mass characteristics are investigated. The physical characteristics which include the skin friction, heat and mass transfers, velocity, temperature and concentration are further elaborated with the variation of governing parameters and presented through graphs. It is observed that the multiple (dual) solutions are likely to exist when the needle moves against the direction of the fluid flow. It is also noticed that the reduction in needle thickness contributes to the enlargement of the region of the dual solutions. The determination of the stable solution has been done using a stability analysis. The results indicate that the upper branch solutions are linearly stable, while the lower branch solutions are linearly unstable. The study also revealed that the rate of heat transfer is a decreasing function of heat generation parameter, while the rate of mass transfer is an increasing function of heat generation and chemical reaction parameters.