Mechanochemical synthesis of BiSI and Bi19S27I3 semiconductor materials

Sonophotocatalytic removal of organic dyes in real water environments using reusable BiSI@PVDF-HFP nanocomposite membranes

Focusing on the uncontrolled discharge of organic dyes, a known threat to human health and aquatic ecosystems, this work employs a dual-functional catalyst approach, by immobilizing a synthesized bismuth sulfur iodide (BiSI) into a poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymeric matrix for multifunctional water remediation. The resulting BiSI@PVDF nanocomposite membrane (NCM), with 20 wt% filler content, maintains a highly porous structure without compromising morphology or thermal properties. Demonstrating efficiency in natural pH conditions, the NCM removes nearly all Rhodamine B (RhB) within 1 h, using a combined sonophotocatalytic process. Langmuir and pseudo-second-order models describe the remediation process, achieving a maximum removal capacity (Qmax) of 72.2 mg/g. In addition, the combined sonophotocatalysis achieved a degradation rate ten and five times higher (0.026 min-1) than photocatalysis (0.002 min-1) and sonocatalysis (0.010 min-1). Furthermore, the NCM exhibits notable reusability over five cycles without efficiency losses and efficiencies always higher than 90%, highlighting its potential for real water matrices. The study underscores the suitability of BiSI@PVDF as a dual-functional catalyst for organic dye degradation, showcasing synergistic adsorption, photocatalysis, and sonocatalysis for water remediation.

Bismuth sulfoiodide (BiSI) nanorods: synthesis, characterization, and photodetector application

The nanorods of bismuth sulfoiodide (BiSI) were synthesized at relatively low temperature (393 K) through a wet chemical method. The crystalline one-dimensional (1D) structure of the BiSI nanorods was confirmed using high resolution transmission microscopy (HRTEM). The morphology and chemical composition of the material were examined by applying scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The average diameter of 126(3) nm and length of 1.9(1) µm of the BiSI nanorods were determined. X-ray diffraction (XRD) revealed that prepared material consists of a major orthorhombic BiSI phase (87%) and a minor amount of hexagonal Bi₁₃S₁₈I₂ phase (13%) with no presence of other residual phases. The direct energy band gap of 1.67(1)  eV was determined for BiSI film using diffuse reflectance spectroscopy (DRS). Two types of photodetectors were constructed from BiSI nanorods. The first one was traditional photoconductive device based on BiSI film on stiff glass substrate equipped with Au electrodes. An influence of light intensity on photocurrent response to monochromatic light (λ = 488 nm) illumination was studied at a constant bias voltage. The novel flexible photo-chargeable device was the second type of prepared photodetectors. It consisted of BiSI film and gel electrolyte layer sandwiched between polyethylene terephthalate (PET) substrates coated with indium tin oxide (ITO) electrodes. The flexible self-powered BiSI photodetector exhibited open-circuit photovoltage of 68 mV and short-circuit photocurrent density of 0.11 nA/cm² under light illumination with intensity of 0.127 W/cm². These results confirmed high potential of BiSI nanorods for use in self-powered photodetectors and photo-chargeable capacitors.

Mechanochemical Synthesis of Bi2VO5.5 for Improved Photocatalytic Dye Degradation

A single-phase Bi2VO5.5 powder is formed effectively through a mechanochemical ball milling approach at 650 °C in 5 h and its photocatalytic performance on methylene blue dye is explored. X-ray diffraction and Raman spectroscopy analytical instruments are utilized to confirm the phase formation. The evident presence of irregular-shaped grains is affirmed using a scanning electron microscope. To ascertain the chemical condition of the components present, the Bi2VO5.5 powdered sample undergo an X-Ray photoelectron spectroscopy investigation. The sample is analyzed using a time-dependent photocurrent to discern its charge carrier transportation behavior. A photocatalytic study using Bi2VO5.5 powder produced through the mechanochemical ball milling method has not been explored till now. The efficacy of the ball-milled Bi2VO5.5 powder to attain enhanced photocatalytic efficiency which hasn't been investigated till now, is explored. The ball-milled Bi2VO5.5 sample achieved 70% degradation efficiency when performing the photocatalysis investigation. The photocatalytic dye degradation discerns pseudo-first-order kinetics and achieves a notable k value of 0.00636 min-1. The scavenger test indicates that h+ radicals are the prominent active species during the photocatalysis experiment. The germination index is determined by conducting a phytotoxicity test with the use of Vigna radiata seeds. Here ball-milled Bi2VO5.5 powder attains enhanced dye degradation efficiency.

Emerging Chalcohalide Materials for Energy Applications

Semiconductors with multiple anions currently provide a new materials platform from which improved functionality emerges, posing new challenges and opportunities in material science. This review has endeavored to emphasize the versatility of the emerging family of semiconductors consisting of mixed chalcogen and halogen anions, known as "chalcohalides". As they are multifunctional, these materials are of general interest to the wider research community, ranging from theoretical/computational scientists to experimental materials scientists. This review provides a comprehensive overview of the development of emerging Bi- and Sb-based as well as a new Cu, Sn, Pb, Ag, and hybrid organic-inorganic perovskite-based chalcohalides. We first highlight the high-throughput computational techniques to design and develop these chalcohalide materials. We then proceed to discuss their optoelectronic properties, band structures, stability, and structural chemistry employing theoretical and experimental underpinning toward high-performance devices. Next, we present an overview of recent advancements in the synthesis and their wide range of applications in energy conversion and storage devices. Finally, we conclude the review by outlining the impediments and important aspects in this field as well as offering perspectives on future research directions to further promote the development of chalcohalide materials in practical applications in the future.

Understanding the Crystal Growth of Bismuth Chalcohalide Nanorods through a Self-Sacrificing Template Process: A Comprehensive Study

Bismuth-based semiconductors are promising candidates for applications in photocatalysis, photodetection, solar cells, etc. BiSI in particular is attracting attention. It has anisotropic optoelectronic properties and comprises relatively abundant elements. However, the synthesis of this ternary compound presents several challenges. Here, we delve into the underlying chemical processes that lead to the crystal growth of BiSI nanorods and optimize a solution-based synthesis. The mechanism of formation of BiSI nanocrystals is the self-sacrifice of Bi₂S₃ nanostructures, which also act as templates. The crystallographic similarities between the chalcogenide and the chalcohalide allow for the solid state transformation from one to the other. However, there is also a synergy with the I₃^- species formed in the reaction media needed to obtain BiSI. Our method makes use of a green solvent, avoids complicated media, and drastically reduces the reaction time compared to other methods. The obtained nanorods present a band gap of 1.6 eV, in accordance with the reported values. This work presents insight into the chemistry of bismuth-based semiconductors, while introducing an easy, green, and scalable synthesis of a promising material, which could also be applied to similar compounds and other chalcoiodides, such as SbSI. In addition, the optical properties of the BiSI nanorods show their potential in photovoltaic applications.

Bi19S27I3 nanorods: a new candidate for photothermal therapy in the first and second biological near-infrared windows

Near-infrared (NIR) light-induced photothermal cancer therapy using nanomaterials as photothermal agents has attracted considerable research interest over the past few years. As the key factor in photothermal therapy systems, a variety of photothermal agents have been developed. However, the exploration of novel photothermal therapy nanoplatforms with high NIR absorption remains a significant challenge, especially those working in both NIR-I and NIR-II windows. In this work, Bi19S27I3 nanorods with remarkably high absorption covering the whole visible light to the entire NIR-I and NIR-II regions have been successfully prepared through a facile solvothermal approach. The as-synthesized Bi19S27I3 nanorods have a high photothermal conversion efficiency of 42.7% at 808 nm (NIR-I) and 41.5% at 1064 nm (NIR-II), making them a promising candidate for photothermal therapy. In vitro cell viability assay reveals that the Bi19S27I3 sample has good biocompatibility and exhibits significant cell-killing effect under NIR irradiation. In vivo anti-tumor experiments demonstrate that the tumor growth can be effectively inhibited by fatal hyperthermia ablation mediated by Bi19S27I3 nanorods under the irradiation of an 808 nm or 1064 nm laser. Therefore, this study should be primarily beneficial for the development of new materials for NIR photothermal therapy applications.

Effect of carbon nanotubes loading on the photocatalytic activity of BiSI/BiOI as a novel photocatalyst

In this paper, a simple hydrothermal method is employed to synthesize BiSI/BiOI/CNT nanocomposite with enhanced photocatalytic activity. The properties of the prepared samples were studied using nitrogen adsorption-desorption isotherm, photoluminescence, X-ray diffraction analysis (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive spectrometry (EDS), UV-vis diffuse reflectance spectroscopy (DRS), and electrochemical impedance spectroscopy (EIS). The loading amount of CNT had a significant influence on the photoactivity of the BiSI/BiOI/CNT composite. In this study, several BiSI/BiOI/CNT nanocomposite samples with various mass ratios of CNT were made-up for further investigation to scrutinize the influence of CNT content on the photocatalytic activity of the nanocomposite. Photocatalysis measurements revealed that 2% Wt of CNT possesses the highest photocatalytic activity in the visible light irradiation with 93.1% photodegradation of malachite green (MG) as a test dye. The enhanced photocatalytic performance can be due to the large surface area, excellent conductivity performance, and high absorption ability in the visible light region. The synergistic effect of the factors mentioned above makes BiSI/BiOI/CNT nanocomposite a high-performance photocatalyst under visible light irradiation. An appropriate reaction mechanism of dye photodegradation has suggested according to the result of active species trapping experiments.