Accurate band gap determination of chemically synthesized cobalt ferrite nanoparticles using diffuse reflectance spectroscopy

Visible to near-infrared emissions of Bi2Mo2O9: Pr3+ multifunctional phosphors for multi-mode temperature sensing, white LEDs and bioimaging

Research on multifunctional luminous materials has garnered a lot of interest in the fields of optical sensing, biological imaging, white light-emitting diodes illumination, etc. A novel multifunctional phosphor of Pr3+-doped Bi2Mo2O9 (BMO: Pr), created via the solid-state method, was investigated in this work. X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, photoluminescence spectra, and fluorescence decay curves were employed to analyze the produced phosphors. Typical Pr3+ characteristic emissions, such as red and near-infrared (NIR), were found under 450 nm excitation. With the temperature increase, the intensity of different emissions changes significantly and exhibits various change trends. In the temperature range of 303-483 K, a multi-mode temperature sensing measurement of BMO: Pr phosphor was performed via three different temperature sensing modes: thermally coupled energy levels of 3P0/3P1, non-thermally coupled energy levels of 1D2/3P0, 3P1, and fluorescence lifetime. The corresponding maximum relative sensitivities were 1.01 %K-1 at 303 K, 0.92 %K-1 at 303 K, and 2.73 %K-1 at 483 K, respectively. Subsequently, a prototype white LED was assembled by integrating the commercial YAG: Ce and BMO: Pr red phosphors and a 460 nm blue LED chip. The calculated color coordinates, related color temperature, and color rendering index were (0.33, 0.33), 5373 K, and 87, respectively. In addition, biological tissue penetration experiments were conducted to discuss the possible use of NIR emission from BMO: Pr phosphor in biological imaging. All the results indicated that the BMO: Pr phosphors are promising for the fields of multi-mode optical temperature detection, white LED, and bioimaging.

Enhanced Fenton-Photocatalytic Degradation of Rhodamine B over Cobalt Ferrite Nanoparticles Synthesized by a Polyvinylpyrrolidone-Assisted Grinding Method

A simple grinding method using polyvinylpyrrolidone (PVP) as a capping agent is introduced to synthesize CoFe2O4 nanoparticles. The effects of calcination temperature (ranging from 450 to 850 °C) on the structural, morphological, physical, and optical properties of the materials are investigated using various techniques, including thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), N2 adsorption isotherm, ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), and vibrating sample magnetometry (VSM). The presence of PVP significantly suppresses the agglomeration of the materials, resulting in a nanocrystalline size of 18 nm for a sample calcined at 650 °C, which is approximately 38% smaller than that of the sample synthesized without PVP. Among the materials studied, the sample calcined at 650 °C exhibits unique properties, including optimal average pore size, specific surface area, and band gap energy, contributing to its superior photocatalytic degradation of rhodamine B via the Fenton reaction. Systematic experiments are performed to investigate the effects of pH, catalyst dosage, dye, and H2O2 concentrations and competitive anions on the rhodamine B degradation. Additionally, the Fenton photodegradation of RhB on CoFe2O4 is well-fitted to the first-order kinetic model. The redox pairs of Co(III)/Co(II) and Fe(III)/Fe(II) in the CoFe2O4 spinel structure might facilitate the formation of Fenton radicals, contributing to the decomposition of RhB through a proposed four-step mechanism. Notably, the material exhibits a strong magnetic response and maintains its excellent performance over five cycles, demonstrating the high potential for reusability as a photocatalyst.

Multifunctional hybrid films made from CoT3OTx4 and CoFeT2OT4 nanoparticles inside a poly 3-hydroxybutyrate matrix and study of their impact in methyl orange photodegradation

This work aims to produce hybrid materials with potential applications in dye photodegradation. Therefore, hybrid films were obtained by incorporating cobalt (II, III) oxide (Co3O4) or cobalt ferrite (CoFe2O4) nanoparticles (NPs) with 18 ± 1.6 nm and 26 ± 1.3 nm, respectively, into a poly 3-hydroxybutyrate (P3HB) polymeric matrix. The Co3O4@P3HB and CoFe2O4@P3HB hybrid films were fabricated by solvent casting in a ratio of 85 mg to 15 mg (P3HB-NPs). Different spectroscopic and microscopy techniques characterized the Co3O4 and CoFe2O4 NPs and the P3HB, Co3O4@P3HB and CoFe2O4@P3HB films. The optical band gap for Co3O4 and CoFe2O4 NPs was estimated from their diffuse reflectance spectra (DRS) around 2.5 eV. X-ray diffraction (XRD) of the hybrid films revealed that the nanometric sizes of the Co3O4 and CoFe2O4 nanoparticles incorporated into the P3HB are preserved. The magnetic hysteresis curve of CoFe2O4 nanoparticles and CoFe2O4@P3HB film showed a ferromagnetic behaviour at 300 K. Transmission electron microscopy (TEM) confirmed the formation of nanocrystals, and scanning electron microscopy (SEM) provided evidence for the successful incorporation of the NPs into the P3HB matrix. The surface roughness and hydrophilicity of the hybrid films are increased compared to the P3HB film. The impact of the nanoparticles and the hybrid films on the photodegradation of methyl orange (MO) in its acidic form was studied. The photodegradation tests were carried out by direct sunlight exposure. The CoFe2O4@P3HB hybrid film achieved 85% photodegradation efficiency of a methyl orange solution of 20 ppm after 15 minutes of exposure to sunlight. After 30 minutes of exposure to sunlight, the nanoparticles and the hybrid films reached about 90% of the MO degradation. The results suggest that combining nanoparticles with the polymer significantly enhances photodegradation compared to isolated nanoparticles.

8-Anilino-1-naphthalenesulfonate-Conjugated Carbon-Coated Ferrite Nanodots for Fluoromagnetic Imaging, Smart Drug Delivery, and Biomolecular Sensing

BACKGROUND

Superparamagnetic properties and excitation independence have been incorporated into carbon-decorated manganese ferrite nanodots (MnFe@C) to introduce an economical and safer multimodal agent for use in both T1-T2 MRI and fluorescence-based imaging to replace the conventional highly toxic heavy metal contrast agents.

METHODS

The surface conjugation of 8-anilino-1-naphthalenesulfonate (ANS) to MnFe@C nanodots (ANS-MnFe@C) enhances both longitudinal and transverse MRI relaxation, improves fluorescence for optical imaging, and increases protein detection sensitivity, showing higher multimodal efficacy in terms of molar relaxivity, radiant efficiencies, and fluorescence sensitivity compared to MnFe@C.

RESULTS

The band gap energy was determined using Tauc's equation to be 3.32 eV, while a 72% quantum yield demonstrated that ANS-MnFe@C was highly fluorescent, with the linear range and association constant calculated using the Stern-Volmer relation. The synthesized ANS-MnFe@C demonstrated excellent selectivity and sensitivity for bovine serum albumin (BSA), with a nanomolar detection limit of 367.09 nM and a broad linear range from 0.015 to 0.225 mM.

CONCLUSIONS

In conclusion, ANS-MnFe@C holds ease of fabrication, good biocompatibility, as assessed in A375 cells, and an effective pH-sensitive doxorubicin release profile to establish anticancer activity in lung cancer cell line (A549), highlighting its potential as an affordable therapeutic agent for multimodal imaging, drug delivery, and protein sensing.

Biomolecular Interactions and Anticancer Mechanisms of Ru(II)-Arene Complexes of Cinnamaldehyde-Derived Thiosemicarbazone Ligands: Analysis Combining In Silico and In Vitro Approaches

Our study focuses on synthesizing and exploring the potential of three N-(4) substituted thiosemicarbazones derived from cinnamic aldehyde, alongside their Ru(II)-(η6 -p-cymene)/(η6-benzene) complexes. The synthesized compounds were comprehensively characterized using a range of analytical techniques, including FT-IR, UV-visible spectroscopy, NMR (1H, 13C), and HRMS. We investigated their electronic and physicochemical properties via density functional theory (DFT). X-ray crystal structures validated structural differences identified by DFT. Molecular docking predicted promising bioactivities, supported by experimental observations. Notably, docking with EGFR suggested an inhibitory potential against this cancer-related protein. Spectroscopic titrations revealed significant DNA/BSA binding affinities, particularly with DNA intercalation and BSA hydrophobic interactions. RuPCAM displayed the strongest binding affinity with DNA (Kb = 6.23 × 107 M-1) and BSA (Kb = 9.75 × 105 M-1). Assessed the cytotoxicity of the complexes on cervical cancer cells (HeLa), and breast cancer cells (MCF-7 and MDA-MB 231), revealing remarkable potency. Additionally, selectivity was assessed by examining MCF-10a normal cell lines. The active complexes were found to trigger apoptosis, a vital cellular process crucial for evaluating their potential as anticancer agents utilizing staining assays and flow cytometry analysis. Intriguingly, complexation with Ru(II)-arene precursors significantly amplified the bioactivity of thiosemicarbazones, unveiling promising avenues toward the creation of powerful anticancer agents.

Synthesis of novel CuNb2O6/g-C3N4 binary photocatalyst towards efficient visible light reduction of Cr (VI) and dyes degradation for environmental remediation

The further development of an efficient and sustainable water treatment requires the development of a very active and controllable photocatalyst. The heterojunction is a promising site where the activity of such a photocatalyst can be enhanced. Organic dyes have become a severe concern in recent years owing to their significant presence in wastewater. Hexavalent Chromium (Cr (VI)) is a potential carcinogen also exhibiting great persistence in wastewater. So, a low-waste, high-performance materials is required to eliminate organic dyes and Cr (VI) from wastewater. In this study, CNO/g-CN (CuNb₂O₆/g-C₃N₄) photocatalyst synthesized via co-precipitation, followed by calcination which were characterized using physiochemical and photo-electrochemical approaches to identify their structural, photochemical and optical traits. The uniqueness of the synthesized photocatalyst is due to both its efficient photo-reduction of Cr (VI) and photo-degradation of Rhodamine B (RhB), Methylene Blue (MB) and Methyl Orange (MO) under visible light. The CNO/g-CN composite with 30% CNO heterojunctions exhibited the highest photocatalytic activity with Cr (VI) 92.80% photoreduction and efficiency degradation for RhB, MB, MO of 99.6%, 98.50%, 99.0%, respectively, with constant rate (k). This efficient photocatalytic activity is attributed to the lower recombination rate of electron-hole pairs. Free radical trapping experiments showed that ^•O₂^- and h⁺ play an important role in the photodegradation. The study, therefore, opens an alternative route in the synthesis of very efficient binary photocatalysts for application in environmental remediation.

ZnO Electrodeposition Model for Morphology Control

In this research, a model for electrodeposition of zinc oxide (ZnO) nanostructures over indium-doped tin-oxide (ITO) glass using pulsed current and zinc chloride as source of zinc was proposed. For the model, reactions kinetics rate constants were evaluated by obtaining the reaction product solid mass of the various species through time using an electrochemical quartz crystal microbalance (EQCM). To obtain a mathematical model of the electrodeposition using Ansys CFX 2D simulation software, the reaction kinetics rates were used to calculate mass transfer in the volume closest to the surface. The model was applied to the experimental electrodeposition conditions to validate its accuracy. Dense wurtzite nanostructures with controlled morphology were obtained on a indium-doped tin-oxide (ITO) glass. Sample characterization was performed using high-resolution field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) on focused ion beam milled (FIBed) sheets from wurtzite mono-crystals. Average crystallite size was evaluated by X-ray diffraction (XRD) using the Scherrer equation, and superficial areas were evaluated by Brunauer, Emmett, and Teller (BET) method. Through the experimental results, a chemical model was developed for the competing reactions based on the speciation of zinc considering pH evolution, and kinetic constants, on the oxygen rich aqueous environment. Owing to the model, an accurate prediction of thickness and type of electrodeposited layers, under given conditions, is achieved. This allows an excellent control of the optical properties of Wurtzite as a photon absorber, for an efficient separation of the electron-hole pair for conduction of the electric charges formed. The large surface area, and small wurtzite crystallites evenly distributed on the thin film electrodeposited over the ITO conductive layer are promising features for later dye-sensitized photovoltaic cell production.

A controllable one-pot hydrothermal synthesis of spherical cobalt ferrite nanoparticles: synthesis, characterization, and optical properties

We herein report the controllable synthesis of spherical cobalt ferrite nanoparticles with average crystallite size in the range of 3.6–12.9 nm using a facile, eco-friendly, hydrothermal method. The hydrothermal treatment was carried out by utilizing cobalt nitrate, ferric nitrate, and ammonium hydroxide in the presence and absence of Arabic gum as a surfactant agent. The purity and crystallinity of the products were tuned by varying reaction conditions such as reaction time (0.5–8 h), reaction temperature (120–180 °C), percentage of ethylene glycol (0–100% (v/v)), pH (8–9.6), and amount of Arabic gum (0–2 g). We characterized the prepared products using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy analysis (EDS), selected area electron diffraction (SAED) patterns, and UV-visible diffuse reflectance spectra (DRS). The optimal hydrothermal treatment was performed at 180 °C and pH 9.6 for 4 h in aqueous media. The results also revealed that the as-prepared spinel cobalt ferrite nanoparticles have an estimated optical band gap energy in the range of ca. 1.6–1.9 eV, indicating the semiconducting characteristics of the products.

A controllable synthesis of spherical cobalt ferrite nanoparticles with average crystallite size in the range of 3.6–12.9 nm using a facile, eco-friendly, hydrothermal method.