Amine reactive dyes: an alternative to estimate membrane integrity in fish sperm cells

Quality evaluation of sperm from livebearing fishes: Standardized assessment of sperm bundles (spermatozeugmata) from Xenotoca eiseni (Goodeidae)

Standardized evaluation of sperm quality is essential for research, commercial-scale cryopreservation, and induced spawning. However, standardized methods for evaluation of sperm bundles (spermatozeugmata or spermatophores) have not been established. The purpose of the present study was to use Redtail Splitfin (Xenotoca eiseni) as a model for freshwater livebearing fishes to establish initial standardized methods to collect sperm bundles, and quantitatively and qualitatively evaluate quality-related attributes. No sperm or sperm bundles were able to be collected by stripping. Testes were removed, rinsed, weighed, placed in 50 μL of buffer solution on a glass slide, and crushed gently 3-5 times with angled spade-tip forceps. Sperm bundles were released into the buffer solution and collected with a pipette into 1.5-mL centrifuge tubes. To quantify size and shape, images of bundles were captured with a CCD camera connected to a microscope, and measured with computer software. There was no significant correlation between body wet weight and major bundle axis length (P = 0.6759), minor axis length (P = 0.5658), average axis length (P = 0.5869), aspect ratio (P = 0.7839), and observed area (P = 0.5727). The concentrations of sperm bundles, estimated with the three methods (Makler® counting chamber, a hemocytometer, and direct counting) were significantly different (P < 0.0001). Hemocytometers were suitable for estimation of bundles from X. eiseni. To evaluate activation of sperm, bundles were viewed with a microscope, and classified into one of five phases by evaluating morphology of the bundles and motion of sperm within the bundles as Phase 0 through Phase 4 that represented early through late activation stages. The frequencies and duration of each activation phase were used to evaluate dissociation of sperm bundles and motility capability of sperm within the bundles. Within 180 min of activation, all five phases were observed. Overall, this study for the first time established standardized methods to collect and evaluate quality-related attributes of sperm bundles. These standardized evaluations provide a basis for further modification, standardization, and generalization, which are useful in research on livebearing fishes involving male gametes, such as studies on cryopreservation, artificial insemination, and in development of germplasm repositories for imperiled species including goodeids.

Activation of free sperm and dissociation of sperm bundles (spermatozeugmata) of an endangered viviparous fish, Xenotoca eiseni

Knowledge of sperm motility activation for viviparous fishes has been limited to study of several species in Poeciliidae, and the dissociation of sperm bundles is even less understood. The goal of this study was to use the endangered Redtail Splitfin (Xenotoca eiseni) as a model to investigate the activation of sperm from viviparous fishes by study of free sperm and spermatozeugmata (unencapsulated sperm bundles). The specific objectives were to evaluate the effects of: (1) osmotic pressure and refrigerated storage (4 °C) on activation of free sperm, (2) osmotic pressure, ions, and pH on dissociation of spermatozeugmata, and (3) CaCl₂ concentration and pH on sperm membrane integrity. Free sperm were activated in Ca²⁺-free Hanks' balanced salt solution at 81-516 mOsmol/kg. The highest motility (19 ± 6%) was at 305 mOsmol/kg and swim remained for 84 h. Glucose (300-700 mOsmol/kg), NaCl (50-600 mOsmol/kg), and KCl, MgCl₂, and MnCl₂ at 5-160 mM activated sperm within spermatozeugmata, but did not dissociate spermatozeugmata. CaCl₂ at 5-160 mM dissociated spermatozeugmata within 10 min. Solutions of NaCl-NaOH at pH 11.6 to 12.4 dissociated spermatozeugmata within 1 min. The percentage of viable cells had no significant differences (P = 0.2033) among different concentrations of CaCl₂, but it was lower (P < 0.0001) at pH 12.5 than at pH between 7.0 and 12.0. Overall, this study provided a foundation for quality evaluation of sperm and spermatozeugmata from livebearing fishes, and for development of germplasm repositories for imperiled goodeids.

Challenges in Development of Sperm Repositories for Biomedical Fishes: Quality Control in Small-Bodied Species

Quality control (QC) is essential for reproducible and efficient functioning of germplasm repositories. However, many biomedical fish models present significant QC challenges due to small body sizes (<5 cm) and miniscule sperm volumes (<5 μL). Using minimal volumes of sperm, we used Zebrafish to evaluate common QC endpoints as surrogates for fertilization success along sequential steps of cryopreservation. First, concentrations of calibration bead suspensions were evaluated with a Makler^® counting chamber by using different sample volumes and mixing methods. For sperm analysis, samples were initially diluted at a 1:30 ratio with Hanks' balanced salt solution (HBSS). Motility was evaluated by using different ratios of sperm and activation medium, and membrane integrity was analyzed with flow cytometry at different concentrations. Concentration and sperm motility could be confidently estimated by using volumes as small as 1 μL, whereas membrane integrity required a minimum of 2 μL (at 1 × 10⁶ cells/mL). Thus, <5 μL of sperm suspension (after dilution to 30-150 μL with HBSS) was required to evaluate sperm quality by using three endpoints. Sperm quality assessment using a combination of complementary endpoints enhances QC efforts during cryopreservation, increasing reliability and reproducibility, and reducing waste of time and resources.

3-D printing provides a novel approach for standardization and reproducibility of freezing devices

Cryopreservation has become an important and accepted tool for long-term germplasm conservation of animals and plants. To protect genetic resources, repositories have been developed with national and international cooperation. For a repository to be effective, the genetic material submitted must be of good quality and comparable to other submissions. However, due to a variety of reasons, including constraints in knowledge and available resources, cryopreservation methods for aquatic species vary widely across user groups which reduces reproducibility and weakens quality control. Herein we describe a standardizable freezing device produced using 3-dimensional (3-D) printing and introduce the concept of network sharing to achieve aggregate high-throughput cryopreservation for aquatic species. The objectives were to: 1) adapt widely available polystyrene foam products that would be inexpensive, portable, and provide adequate work space; 2) develop a design suitable for 3-D printing that could provide multiple configurations, be inexpensive, and easy to use, and 3) evaluate various configurations to attain freezing rates suitable for various common cryopreservation containers. Through this approach, identical components can be accessed globally, and we demonstrated that 3-D printers can be used to fabricate parts for standardizable freezing devices yielding relevant and reproducible cooling rates across users. With standardized devices for freezing, methods and samples can harmonize into an aggregated high-throughput pathway not currently available for aquatic species repository development.