Non-enzymatic colorimetric biosensor for hydrogen peroxide using lignin-based silver nanoparticles tuned with ionic liquid as a peroxidase mimic

Antibacterial and Photocatalytic Applications of Silver Nanoparticles Synthesized from Lacticaseibacillus rhamnosus

The biosynthesis of silver nanoparticles (AgNPs) presents an innovative and sustainable approach in nanotechnology with promising applications in fields such as medicine, food safety, and pharmacology. In this study, AgNPs were successfully synthesized using the probiotic strain Lacticaseibacillus rhamnosus (BCRC16000), addressing challenges related to stability, biocompatibility, and scalability that are common in conventional nanoparticle production methods. The formation of AgNPs was indicated by a color change from yellow to brown, and UV-visible spectrophotometry confirmed their presence with a characteristic absorption peak at 443 nm. Furthermore, Fourier transform infrared (FTIR) spectroscopy revealed the involvement of biomolecules in reducing silver ions, which suggests their role in stabilizing the nanoparticles. In addition, field emission scanning electron microscopy (FE-SEM) showed significant morphological and structural changes. At the same time, dynamic light scattering (DLS) and zeta potential analyses provided valuable insights such as average size (199.7 nm), distribution, and stability, reporting a polydispersity index of 0.239 and a surface charge of -36.3 mV. Notably, the AgNPs demonstrated strong antibacterial activity and photocatalytic efficiency, underscoring their potential for environmental and biomedical applications. Therefore, this study highlights the effectiveness of Lacticaseibacillus rhamnosus in the biosynthesis of AgNPs, offering valuable antibacterial and photocatalytic properties with significant industrial and scientific implications.

Optical detection of uric acid based on a citric acid functionalized copper-doped biochar nanozyme

Uric acid is the end product of purine metabolism and is a key biomarker for various diseases. Under normal conditions, there is a balance between its production and excretion. Its higher concentration can cause inflammation and severe pain, which makes it necessary to monitor its level for the diagnosis, management, and treatment of various pathological conditions. The current work reports on the synthesis of a copper-doped biochar (Cu@BC) nanocomposite and its functionalization with citric acid. The synthesis of the mimic enzyme was confirmed through various spectroscopic techniques. The nanozyme catalyzes hydrogen peroxide to oxidize tetramethylbenzidine (TMB) with an optical change from colorless to blue-green. This optical transformation was confirmed through a UV-vis spectrophotometer, which gave an expected λ max of 652 nm characteristic of TMBoxi. The incorporation of uric acid into this reaction mixture resulted in the reduction of TMBoxi to TMBred, accompanied by an optical change from blue-green to colorless, which was again confirmed with a UV-vis spectrophotometer. The fabricated sensor's performance was finely-tuned to report on its various key components. The best response was achieved at 2 mg of the nanozyme, pH 6, time 150 seconds, TMB, and hydrogen peroxide 0.9 and 1.5 mM, respectively. Under the above-mentioned optimized conditions, the fabricated sensor detected uric acid in the range of 1-90 μM with limits of detection and quantification of 0.17 and 0.58 μM, respectively, with an R 2 of 0.997. The proposed sensor was highly selective and successfully detected uric acid in real sample solutions.

Colorimetric sensing of hydrogen peroxide using capped Morus nigra-sawdust deposited zinc oxide nanoparticles via Trigonella foenum extract

Hydrogen peroxide (H2O2) is one of the main byproducts of most enzymatic reactions, and its detection is very important in disease conditions. Due to its essential role in healthcare, the food industry, and environmental research, accurate H2O2 determination is a prerequisite. In the present work, Morus nigra sawdust deposited zinc oxide (ZnO) nanoparticles (NPs) were synthesized by the use of Trigonella foenum extract via a hydrothermal process. The synthesized platform was characterized by various techniques, including UV-Vis, FTIR, XRD, SEM, EDX, etc. FTIR confirmed the presence of a Zn‒O characteristic peak, and XRD showed the hexagonal phase of ZnO NPs with a 35 nm particle size. The EDX analysis confirmed the presence of Zn and O. SEM images showed that the as-prepared nanoparticles are distributed uniformly on the surface of sawdust. The proposed platform (acetic acid-capped ZnO NPs deposited sawdust) functions as a mimic enzyme for the detection of H2O2 in the presence of 3,3',5,5'-tetramethylbenzidine (TMB) colorimetrically. To get the best results, many key parameters, such as the amount of sawdust-deposited nanoparticles, TMB concentration, pH, and incubation time were optimized. With a linear range of 0.001-0.360 μM and an R2 value of 0.999, the proposed biosensor's 0.81 nM limit of quantification (LOQ) and 0.24 nM limit of detection (LOD) were predicted, respectively. The best response for the proposed biosensor was observed at pH 7, room temperature, and 5 min of incubation time. The acetic acid-capped sawdust deposited ZnO NPs biosensor was also used to detect H2O2 in blood serum samples of diabetic patients and suggest a suitable candidate for in vitro diagnostics and commercial purposes.

Paracetamol-Mediated Synthesis of Silver Nanoparticles and Their Functionalization with Ionic Liquid for the Colorimetric Biosensing of Ascorbic Acid

Ascorbic acid is a vital biomolecule for human beings. When the body's level of ascorbic acid is abnormal, it can lead to a number of illnesses. Its appropriate concentration is necessary for the oxidation of prostaglandins and cyclic adenosine monophosphate, the production of dopamine, norepinephrine, epinephrine, and carnitine, and the expansion and durability of the collagen triple helix in humans. In the present work, silver nanoparticle synthesis was performed through a paracetamol-mediated approach. Different characterization techniques, such as X-ray diffractometry (XRD), energy dispersive X-ray (EDX), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM), were used to confirm the prepared nanoparticles. Subsequently, the prepared Ag NPs functionalized with an ionic liquid were used as a sensing platform for ascorbic acid in blood serum samples. To achieve the best possible results, the proposed biosensor was optimized with different parameters such as TMB concentration, time, amount of capped nanoparticles (NPs), and pH. The proposed biosensor offers a sensitive and straightforward method for ascorbic acid with a linear range from 2 × 10-9 to 3.22 × 10-7 M, an LOD of 1.3 × 10-8 M, an LOQ of 4.3 × 10-8 M, and an R2 of 0.9996, Moreover, applications of the proposed biosensor were successfully used for the detection of ascorbic acid in samples of human plasma, suggesting that Ag NPs with high peroxidase-like activity, high stability, and facile synthesis exhibited promising applications in biomedical fields.

Lignocellulosic Bionanomaterials for Biosensor Applications

The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.

Co-Doped CeO2/Activated C Nanocomposite Functionalized with Ionic Liquid for Colorimetric Biosensing of H2O2 via Peroxidase Mimicking

Hydrogen peroxide acts as a byproduct of oxidative metabolism, and oxidative stress caused by its excess amount, causes different types of cancer. Thus, fast and cost-friendly analytical methods need to be developed for H₂O₂. Ionic liquid (IL)-coated cobalt (Co)-doped cerium oxide (CeO₂)/activated carbon (C) nanocomposite has been used to assess the peroxidase-like activity for the colorimetric detection of H₂O₂. Both activated C and IL have a synergistic effect on the electrical conductivity of the nanocomposites to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The Co-doped CeO₂/activated C nanocomposite has been synthesized by the co-precipitation method and characterized by UV-Vis spectrophotometry, FTIR, SEM, EDX, Raman spectroscopy, and XRD. The prepared nanocomposite was functionalized with IL to avoid agglomeration. H₂O₂ concentration, incubation time, pH, TMB concentration, and quantity of the capped nanocomposite were tuned. The proposed sensing probe gave a limit of detection of 1.3 × 10^-8 M, a limit of quantification of 1.4 × 10^-8 M, and an R² of 0.999. The sensor gave a colorimetric response within 2 min at pH 6 at room temperature. The co-existing species did not show any interference during the sensing probe. The proposed sensor showed high sensitivity and selectivity and was used to detect H₂O₂ in cancer patients' urine samples.

Stabilized Lignin Nanoparticles for Versatile Hybrid and Functional Nanomaterials

Spherical lignin nanoparticles are emerging biobased nanomaterials, but instability and dissolution in organic solvents and aqueous alkali restrict their applicability. Here, we report the synthesis of hydroxymethylated lignin nanoparticles and their hydrothermal curing to stabilize the particles by internal cross-linking reactions. These colloidally stable particles contain a high biobased content of 97% with a tunable particle size distribution and structural stability in aqueous media (pH 3 to 12) and organic solvents such as acetone, ethanol, dimethylformamide, and tetrahydrofuran. We demonstrate that the free phenolic hydroxyl groups that are preserved in the cured particles function as efficient reducing sites for silver ions, giving rise to hybrid lignin-silver nanoparticles that can be used for quick and facile sensing of hydrogen peroxide. The stabilized lignin particles can also be directly modified using base-catalyzed reactions such as the ring-opening of cationic epoxides that render the particles with pH-dependent agglomeration and redispersion properties. Combining scalable synthesis, solvent stability, and reusability, this new class of lignin nanoparticles shows potential for its use in circular biobased nanomaterials.

Colorimetric acetone sensor based on ionic liquid functionalized drug-mediated silver nanostructures

The current work reports the drug-mediated synthesis of silver nanoparticles (AgNPs) and their functionalization with ionic liquid (IL) for acetone determination. The rationale behind the selection of the Augmentin drug was the aromaticity in its structure and the functional groups attached. These properties are not only supposed to work in the synthesis of the nanoparticles but also enhance their electron density. The nanoparticles were further coated with 1-H-3-methylimidazolium acetate IL, having conductivity and aromaticity in their structure. The synthesized nanoparticles have been characterized by different techniques such as FTIR, XRD, SEM, and EDX. Colorimetric determination of acetone was done by using IL capped AgNPs with the assistance of NaCl solution and results were analyzed by UV-Vis spectrophotometry. Low-cost, stable eosin dye works as a substrate and is consumed resulting in a color change from brown to transparent. The IL capped AgNPs act as a reducing agent for the production of reduced radical form of acetone which act on the carboxylate moiety and bubble it out in the form of CO₂. Different parameters such as (concentrations, loading of nanoparticles, time and pH, etc.) were optimized to get the best results of the proposed sensor. The sensor shows a wide linear range of (1 ×10^-8-2.40 ×10^-6 M), low limit of detection 2.66 × 10^-9 M, and limit of quantification 8.86 × 10^-9 M with an R² value of 0.997. The proposed sensor has been successfully applied to diabetic patient's urine samples for acetone detection with a visible colorimetric change. It showed good sensitivity and selectivity towards acetone detection.

Development of a Nonenzymatic Colorimetric Sensor for the Detection of Uric Acid Based on Ionic Liquid-Mediated Nickel Nanostructures

Uric acid (UA) is a metabolic byproduct of purine nucleotides and is excreted as a urine component. Abnormalities in UA metabolism cause localized inflammation due to crystal deposition and can lead to various diseases. In the current study, we successfully fabricated a biosensor based on 1-H-3-methylimidazolium acetate (ionic liquid, IL)-capped nickel nanoparticles (NiNPs) for the detection of uric acid in test samples. The structures of IL-capped NiNPs and their precursors were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. The IL-capped NiNPs possessed intrinsic peroxidase-like properties and displayed selective UA quenching after interacting with 3,3',5,5'-tetramethylbenzidine (TMB) solution. Different parameters such as pH, time, IL, TMB, and UA concentration were optimized to obtain the best results for the proposed sensor. The UA biosensor shows good responses in the linear range from 1 × 10^-8 to 2.40 × 10^-6 M, with a lower limit of detection of 1.30 × 10^-7 M, a limit of quantification of 4.3 × 10^-7 M, and an R ² value of 0.9994. For the colorimetric detection of UA, the proposed sensor gave a short time response of 4 min at room temperature and pH 7.5. The proposed sensing probe detects UA in real serum samples and could be used as a selective sensor for UA in the real sample detection.

A non-enzymatic electrochemical hydrogen peroxide sensor based on copper oxide nanostructures

This article describes the synthesis of nanostructured copper oxide on copper wires and its application for the detection of hydrogen peroxide. Copper oxide petal nanostructures were obtained by a one-step hydrothermal oxidation method. The resulting coating is uniform and dense and shows good adhesion to the wire surface. Structure, surface, and composition of the obtained samples were studied using field-emission scanning electron microscopy along with energy-dispersive spectroscopy and X-ray diffractometry. The resulting nanostructured samples were used for electrochemical determination of the H2O2 content in a 0.1 M NaOH buffer solution using cyclic voltammetry, differential pulse voltammetry, and i-t measurements. A good linear relationship between the peak current and the concentration of H2O2 in the range from 10 to 1800 μM was obtained. The sensitivity of the obtained CuO electrode is 439.19 μA·mM-1. The calculated limit of detection is 1.34 μM, assuming a signal-to-noise ratio of 3. The investigation of the system for sensitivity to interference showed that the most common interfering substances, that is, ascorbic acid, uric acid, dopamine, NaCl, glucose, and acetaminophen, do not affect the electrochemical response. The real milk sample test showed a high recovery rate (more than 95%). According to the obtained results, this sensor is suitable for practical use for the qualitative detection of H2O2 in real samples, as well as for the quantitative determination of its concentration.

Next generation applications of lignin derived commodity products, their life cycle, techno-economics and societal analysis

The pulp and biorefining industries produce their waste as lignin, which is one of the most abundant renewable resources. So far, lignin has been remained severely underutilized and generally burnt in a boiler as a low-value fuel. To demonstrate lignin's potential as a value-added product, we will review market opportunities for lignin related applications by utilizing the thermo-chemical/biological depolymerization strategies (with or without catalysts) and their comparative evaluation. The application of lignin and its derived aromatics in various sectors such as cement industry, bitumen modifier, energy materials, agriculture, nanocomposite, biomedical, H2 source, biosensor and bioimaging have been summarized. This comprehensive review article also highlights the technical, economic, environmental, and socio-economic variable that affect the market value of lignin-derived by-products. The review shows the importance of lignin, and its derived products are a platform for future bioeconomy and sustainability.