Bulk femoral-head autografting in uncemented total hip arthroplasty for acetabular dysplasia: results at 8 to 11 years follow-up

Midterm Results of Severe Hip Dysplasia after Using a Cementless Acetabular Component with Bulk Bone Graft in Total Hip Arthroplasty: A Minimum Five-Year Follow-Up Study

In patients with severe hip dysplasia, total hip arthroplasty (THA) using bulk bone graft (BBG) enhances anatomic cup positioning and provides early structural support. This study assesses the mid-term outcomes of THA with BBG in patients with over 50% graft bone coverage. Among 1951 patients who underwent THA between 2003 and 2007, 183 had BBG. After excluding early dropouts and infections, 151 patients remained. They were classified into uncovered (<50% coverage, 79 patients) and covered (>50% coverage, 72 patients) groups. The efficacy of cup fixation was compared between these groups. After ten years, the survival rate for not needing THA revision was 98% in the uncovered group and 100% in the covered group, while the rate for radiographic stability was 93% versus 99%, respectively. Although the cutoff value for the uncovered portion could not be clarified in this study, the mid-term results for 50% to approximately 70% uncovered were comparable to those for 50% or lesser, which have previously been expected to perform well. Recently, biomechanically advantageous bone grafting techniques have been identified, and based on the results of this study, it may be possible to expand the indications for THA with bone grafting for developmental dysplasia of the hip.

Debridement without bone grafting prevents osteolytic lesions progression in revision THAs with prosthesis revised

Background

Bone defects in revision total hip arthroplasties (rTHAs) caused by osteolysis are routinely treated with autografts or allografts, despite their various disadvantages. Currently, little is known about the prognosis of ungrafted cavities with complete debridement following prosthetic revision in rTHAs with component loosening, as few reports have focused on the application of debridement without bone grafting in osteolytic lesions that do not compromise structural stability in revision THAs with revised components.

Methods

In this study, 48 patients receiving rTHAs with components revised for aseptic loosening with osteolysis between 2015 and 2019 were included. Anteroposterior and lateral radiographs of hips before and after revision surgery and last follow-up were compared to measure whether the size of the debrided osteolytic cavity without bone graft had changed.

Results

In total, 48 patients with 59 osteolytic lesions were enrolled. The mean follow-up period was 3.33 years (range 2-6 years). None of the 59 cavities had progressed at the last follow-up, and 11 (18.6%) regressed. Two patients underwent re-revision according to dislocation during follow-up.

Conclusion

In rTHAs with revised components, osteolytic lesions that do not influence structural stability could be debrided without grafting to avoid the disadvantages of grafting. Debridement and component revision are sufficient to prevent the progression of osteolytic lesions during surgery, without having adverse effects on the short-to mid-term prognosis.

Femoral head and neck autograft in arthroplasty for developmental dysplasia of the hip: a systematic review of long-term outcomes

PURPOSE

Total hip arthroplasty (THA) with an acetabular component and an autogenous femoral head graft for acetabular reconstruction in developmental dysplasia of the hip was first described by Harris et al. in 1977. While a number of studies have addressed the aforementioned scenario over the last decades, most lack sufficient numbers and follow-up. As such, we analyzed long-term outcomes of THAs with femoral autograft for arthrosis secondary to hip dysplasia.

METHODS

A systematic review was performed using a structured PubMed, Web of Science, Ovid MEDLINE, and Cochrane analysis, based on the PRISMA criteria. All original studies from 1977 to 2022 with a mean follow-up of 10 or more years were included. Methodological Index for Nonrandomized Studies (MINORS) were used for quality assessment.

RESULTS

A total of 26 studies with 1316 patients (87% females) undergoing 1543 THAs with femoral autograft (2 times neck graft, 24 times head graft) were included. Mean age was 52 years (range, 28-73) and the mean follow-up was 13 years (range, 9-18). The revision rate was 8.3% (n = 129), and 73% of revisions were for loosening. Rate of infection (0.5%) and dislocations (1%) were low. Radiographic analysis revealed 167 loose acetabular components (11%) and 118 cases of graft resorption (7.6%). Mean Harris Hip Score increased from 42 to 85. Mean MINORS score was 11, and no study was level of evidence I or II.

CONCLUSIONS

Femoral autograft with THA may be a viable long-term option for hip reconstruction in developmental dysplasia of the hip. However, moderate loosening rates and low level of evidence must be acknowledged before drawing the final conclusions.

LEVEL OF EVIDENCE

Therapeutic Level III.

Anatomic acetabular reconstruction with femoral head autograft for developmental dysplasia of the hip (DDH) with a minimum follow-up of 10 years

BACKGROUND

DDH with coxarthrosis causes significant deformity and bone deficiency. Various reconstructive techniques have been proposed to treat developmental dysplasia of the hip. However, the existing literature has not yet reached a consensus on the best technique regarding long-term survival.

OBJECTIVES

This study aims to evaluate the long-term survival of uncemented hydroxyapatite (HA) coated acetabular components augmented with a femoral head autograft.

METHODS

We retrospectively reviewed the cases of 31 hips in 29 patients (24 female, 5 male, mean age 45.06 years) treated with HA-coated cementless components and femoral head autograft between 2000-2008 with a minimum follow-up of 10 years. Graft resorption, cup loosening and the anatomical hip centre were determined. Functional outcomes were calculated using the Harris Hip Scoring system. The survival of the acetabular component was evaluated using the Kaplan-Meier method.

RESULTS

In 24 hips (77,4%), we reconstructed the hip centre anatomically. The remaining cups had variable deviations from the anatomical rotation centre. Only one patient required revision due to loosening. Survival analysis revealed 96.8% survival at 10 years. The mean Harris Hip Score was 39.23 preoperatively and 84.77 at final follow-up. There was no statistical correlation between revision and any of the measured parameters.

DISCUSSION

Acetabular reconstruction with a femoral head autograft allows for anatomical cup positioning, early structural support and increases bone stock for future revisions. Although our prior cemented cup study showed that anatomical cup orientation is critical, this study demonstrated the absence of a correlation between implant failure and cup positioning, suggesting that HA-coated cementless cups are more stable and forgiving.

CONCLUSIONS

HA-coated acetabular cups augmented with femoral head autograft provided long-term, reliable and durable cup fixation in dysplastic hips of young adults.

Bone defect map of the true acetabulum in hip dysplasia (Crowe type II and III) based on three-dimensional image reconstruction analysis

The high hip center technique (HHC) is considered to be feasible for acetabular reconstruction in patients with DDH, but there is little in-depth study of its specific impact on Crowe type II and III DDH. The purpose of this study was to simultaneously analyze the effect of HHC on bone coverage of the cup (CC) in the acetabular reconstruction of type II and III DDH patients and to propose a map of acetabular bone defects from the perspective of the cup. Forty-nine hip CT data of 39 patients with DDH (Crowe type II and III) were collected to simulate acetabular reconstruction by cup models of different sizes (diameter 38mm–50 mm, 2 mm increment) with the HHC technique. The frequency distribution was plotted by overlapping the portions of the 44 mm cups that were not covered by the host bone. The mean CC of cups with sizes of 38 mm, 40 mm, 42 mm, 44 mm, 46 mm, 48 mm, and 50 mm at the true acetabula were 77.85%, 76.71%, 75.73%, 74.56%, 73.68%, 72.51%, and 71.75%, respectively, and the maximum CC increments were 21.24%, 21.58%, 20.86%, 20.04%, 18.62%, 17.18%, and 15.42% (P < 0.001), respectively, after the cups were elevated from the true acetabula. The bone defect map shows that 95% of type II and III DDH acetabula had posterosuperior bone defects, and approximately 60% were located outside the force line of the hip joint. Acetabular cups can meet a CC of more than 70% at the true acetabulum, and approximately 60% of Crowe type II and III DDH patients can obtain satisfactory CC at the true acetabulum by using a 44-mm cup without additional operations.

Survivorship and functional outcome of a cemented acetabular component with bulk roof autograft for severe acetabular dysplasia: 12- to 23-year follow-up

AIMS

Primary aim was to determine survival of a cemented acetabular component with bulk roof autograft with a minimum of 12 years follow-up. The secondary aim was to determine the clinical outcome.

METHODS

A cohort of 62 consecutive patients (74 hips) undergoing cemented total hip arthroplasty with acetabular bulk roof autograft for acetabular dysplasia were retrospectively identified. The group consisted of 57 female patients (67 hips) and 5 male patients (7 hips) with a mean age at operation of 45 years. No patient was lost to follow-up, however 9 patients died had during the study period. The Oxford Hip Score (OHS), Forgotten Joint Score (FJS), EuroQol 5-Dimensional Score (EQ-5D), Short Form (SF-12) physical score and patient satisfaction were used to assess clinical outcome for patients with a surviving prosthesis.

RESULTS

The median follow-up was 16.6 (13.4-19.1) years. 6 revisions were performed during the follow-up period, all of which were due to aseptic loosening of the acetabular component. The all-cause Kaplan Meier survival rate for the acetabular component was 99% at 10 years, 95% at 15 years and 83% at 20 years. Neither age, gender, femoral osteotomy or polyethylene (UHMW vs. cross-linked) were significant predictors of aseptic revision of the acetabular component. There were no case of graft resorption and all grafts were radiologically incorporated. 45 patients were available for functional assessment at a mean follow-up of 18.2 years. The mean OHS was 37.8, FJS was 55.7, EQ5D was 0.73, and SF-12 physical component was 43.2. No patient was dissatisfied, with 2 patients reporting a neutral satisfaction, 7 stating they were satisfied and the remaining 36 were very satisfied.

CONCLUSIONS

A cemented acetabular component with bulk roof autograft for dysplasia offers excellent survival with good to excellent functional outcome with high patient satisfaction in the medium- to long-term.

Minimum 10-Year Results of Cementless Ceramic-On-Ceramic Total Hip Arthroplasty Performed With Transverse Subtrochanteric Osteotomy in Crowe Type IV Hips

BACKGROUND

Total hip arthroplasty (THA) performed for developmental dysplasia of the hip is a technically difficult procedure with a high complication rate, especially in the presence of completely dislocated hips. This study aimed to evaluate at least 10 years of follow-up results of cementless, ceramic-on-ceramic (CoC) THA performed with transverse subtrochanteric osteotomy in Crowe type IV hips.

METHODS

We retrospectively reviewed 50 patients' 67 hips that underwent CoC, cementless THA with transverse subtrochanteric osteotomy between 2008 and 2011. Clinical and radiological data of the hips were examined. Clinical results were evaluated using the Harris Hip Score and the Western Ontario and McMaster Universities Osteoarthritis Index.

RESULTS

The mean Harris Hip Score improved from 22.9 ± 9.9 preoperatively to 94.1 ± 8.1 at the final follow-up (P < 0.001). The median Western Ontario and McMaster Universities Osteoarthritis Index score improved from 72 (interquartile range: 17) preoperatively to 2 (interquartile range: 17) postoperatively (P < 0.001). The preoperative mean leg length discrepancy was improved from 4.9 ± 1 cm to 1.5 ± 1 cm in unilateral cases at the last follow-up (P < 0.001). Revision surgery was required because of nonunion in two patients, prosthetic infection in one patient, and aseptic femoral loosening in the other patient. The overall ten-year survival rate was 94% for femoral stems and 98.5% for acetabular components as per Kaplan-Meier survival analysis.

CONCLUSION

Transverse subtrochanteric shortening osteotomy combined with using cementless acetabular and femoral components with a CoC bearing surface promises successful clinical results and high prosthesis survival in the treatment of Crowe IV hips at long-term follow-up.

Stepped osteotomy of femoral head autograft for acetabular reconstruction in total hip arthroplasty for dysplasia of the hip: 3 to 12 years' results

OBJECTIVES

This study aims to describe a stepped osteotomy technique applied to the femoral head autograft to keep the graft volume at a sufficient level, provide primary stability, and direct cancellous-cancellous bone contact.

PATIENTS AND METHODS

In this retrospective study, 24 hips of 20 patients (5 males, 15 females; mean age 53 years; range, 43 to 68 years) with dysplasia of the hip (DDH) who underwent total hip arthroplasty with femoral head stepped osteotomy technique were evaluated between April 2003 and June 2010. Patients' age, gender, operation side, and postoperative complications were recorded. Aseptic loosening of the acetabular cup and graft integration/resorption were evaluated radiographically. Radiological evaluations were performed according to the methods of DeLee and Charnley, and Mulroy and Harris. Functional status of the patients was determined according to the criteria of Merle d'Aubigné and Postel, and Harris hip score (HHS).

RESULTS

The mean follow-up period was 5.5 years (range, 3 to 12 years). None of the patients had any complications in the early postoperative period. In all patients, the percentage of acetabular component coverage by the graft was measured as 27% (range, 19 to 38%) on average. At the last follow-up, all patients were satisfied with the result and there was no sign of clinically loosening, osteointegration was complete, and there was no radiographic evidence of graft resorption or collapse of any hip. The overall Merle d'Aubigné scores and HHSs of the patients significantly improved at the final follow-up.

CONCLUSION

This stepped osteotomy technique increases the probability of osteointegration, reduces the need for early revision, and provides reliable stability with satisfactory clinical and radiological midterm results.

Acetabular "up-and-in" defect treated with in-situ femoral head autograft technique during total hip arthroplasty

A 56-year-old male laborer with severe superior and medial acetabular protusio was treated with a cementless left total hip arthroplasty (THA) using an inexpensive technique that preserved the incarcerated femoral head in situ. The head was never dislocated, so the ligamentum was not disrupted. Wires stabilized the femoral head while reaming to prevent it from spinning, and multiple screws united the cup, autograft, and pelvis. At 2-year follow-up, the patient has pain-free hip function, radiographic union, and no component loosening or graft resorption.

Primary Total Hip Arthroplasty in Severe Dysplastic Hip Osteoarthritis With a Far Proximal Cup Position

BACKGROUND

Developmental hip dysplasia is the most common cause of secondary hip osteoarthritis. Due to severe acetabular bone deficiency, cup positioning in total hip arthroplasty (THA) of dysplastic hips remains a surgical challenge. The aim was to analyze the functional outcome of far proximal cup positions in primary THA.

METHODS

Fifty patients (61 hips) with THA for severe dysplastic osteoarthritis and a far proximal cup position were included. Patients were divided according to the heights of the implanted cups with increasing vertical distance from the interteardrop line (group A: 55-65 mm, group B: 65-75 mm, group C: >75 mm). Functional outcome was assessed at latest follow-up (38 ± 16 months) by Lower Extremity Functional Score, Tegner Activity Score, and Harris Hip Score (HHS). Patients answered a Patient Satisfaction Questionnaire. Leg length discrepancy was estimated radiographically.

RESULTS

The Lower Extremity Functional Score significantly decreased in C (45.3 ± 25) compared to A (66.7 ± 15.3) and B (67.9 ± 9.9). The Tegner Activity Score significantly increased in all subgroups from preoperative to postoperative (2.2 ± 1.3 to 4.1 ± 1.4; P < .05). The mean overall HHS was 89.3 ± 14.7 (A: 89.5 ± 14.3, B: 94.3 ± 6.5, C: 78.3 ± 22.1). The HHS domains of activity of daily life and gait were significantly reduced in C (P < .05). Patients described a high satisfaction level with the surgery. No significant differences were found with regard to preoperative and postoperative leg lengthening (P = .881). Neither dislocations, impingement problems nor neurologic complications were observed.

CONCLUSION

Primary THA without any concomitant surgical interventions with a far proximal cup position offers a safe and effective treatment option in severe dysplastic hip osteoarthritis.

Three-Dimensional Host Bone Coverage Required in Total Hip Arthroplasty for Developmental Dysplasia of the Hip and Its Relationship With 2-Dimensional Coverage

BACKGROUND

In total hip arthroplasty, the minimum host bone coverage required on the cup for stable fixation has been previously reported; however, the coverage was generally evaluated on a 2-dimensional (2D) image and 3-dimensional (3D) coverage has not been well described.

METHODS

We used postoperative computed tomography images to retrospectively measure 3D cup coverage in 151 hips with developmental dysplasia of the hip that underwent primary total hip arthroplasty. The aims were to (1) determine the minimum requirement of the 3D coverage for stable cup fixation; (2) evaluate the relationship between 2D and 3D coverage; and (3) identify the factors associated with 2D-3D discrepancy, defined as follows: 2D-3D discrepancy = 2D coverage-3D coverage.

RESULTS

All cups showed stable fixation as demonstrated by bone ingrowth with an average postoperative period of 48 months. The minimum 3D coverage was 61.2%, with a mean value of 77.1% ± 6.7% and maximum value of 97.6%. We found a significant positive but poor relationship between 3D and 2D coverage (bone coverage index; r = 0.30). Consequently, the 2D-3D discrepancy varied greatly, with a mean value of -1.6% ± 12.3% (range, -36.5% to 32.2%). Multiple linear regression analyses confirmed that lower cup center and anterior tilt of the pelvis relative to the computed tomography table were independent factors associated with increasing 2D-3D discrepancy.

CONCLUSION

This study showed that 2D coverage, measured on a projected image, carries a risk of overestimation, especially in hips with the aforementioned features.

A simple technique to strengthen the initial and mid-term to long-term stability of the cup during total hip arthroplasty in developmental dysplasia of the hip

Objectives:

To assess the effects of a technique of cup blocking screws combined with impaction bone grafting during total hip arthroplasty (THA) for patients with developmental dysplasia of the hip (DDH).

Methods:

From August 2011 to July 2015, 53 patients (59 hips) with DDH in our hospital were treated with THA using the technique of cup blocking screws combined with impaction particulate bone grafting. These patients were prospectively followed, and the clinical and imaging results were collected.

Results:

Harris hip score (HHS) was raised from 41.24 before surgery to 91.49 at the latest follow-up (p<0.001). Length discrepancy (LLD) was reduced from 28.97 mm before surgery to 6.08 mm after surgery (p<0.001). No loosening of the cup was detected at the last follow-up. The differences were insignificant in cup inclination and rate of cup coverage among the 3 groups of Crowe type II, type III, and type IV DDH (p>0.05).

Conclusion:

The technique of cup blocking screws combined with impaction particulate bone grafting is simple and reliable, and it not only simplifies the attainment of initial stability, but also strengthens the mid-term to long-term stability during THA in DDH.

An acetabular-preserving procedure for pelvic giant cell tumor involving partial acetabulum

Background

The management of pelvic giant cell tumors (GCTs) involving the acetabulum remains a challenge for surgeons on how to balance the relative benefits of minimizing recurrence and maintaining postoperative hip function. The present study was to present and evaluate the clinical indications, operative technique, and outcomes of pelvic GCTs involving partial acetabulum treated with multiplanar osteotomy and reconstruction of autogenous femoral head bone grafts combined with cementless total hip arthroplasty (THA).

Methods

We retrospectively reviewed seven patients with pelvic GCTs involving partial acetabulum who underwent multiplanar osteotomy and reconstruction of autogenous femoral head bone grafts combined with cementless THA from January 2010 to October 2014. We assess the outcome including the bone graft healing, nonunion, hardware failure, infection, tumor recurrence, and metastasis. And the functional outcome was evaluated by the Musculoskeletal Tumor Society (MSTS)93 score.

Results

All patients were followed up for a mean of 38.1 months (range 26–61 months). All bone grafts are union. No failure of acetabular components, wound healing problem, or deep infection was suspected. No patient experienced metastasis. Recurrence was observed in one out of seven patients, treated by extended resection and implanting iodine ions in the surgical area. The mean MSTS93 score was 29.4 (range 28–30). All patients were disease-free and resumed activities of daily living at the most recent follow-up.

Conclusions

As long as one of the two columns is retained and the resulting defect does not exceed the supra-acetabular line, multiplanar osteotomy and reconstruction of autogenous femoral head bone grafts combined with cementless THA is a viable strategy for the treatment of pelvic GCTs involving partial acetabulum. However, a large-scale prospective clinical study is still needed to verify these procedures.

Three-Dimensional Host Bone Coverage in Total Hip Arthroplasty for Crowe Types II and III Developmental Dysplasia of the Hip

BACKGROUND

Recommendations for minimum cup coverage based on anteroposterior radiographs are widely used as an intraoperative guide in total hip arthroplasty for patients with developmental dysplasia of the hip. The purpose of this study was to examine the validity of two-dimensional (2D) measurement of coverage with three-dimensional (3D) coverage and to identify parameters for determining the 3D coverage during surgery.

METHODS

We developed a technique to accurately reproduce the intraoperative anatomic geometry of the dysplastic acetabulum and measure the 3D cup coverage postoperatively. With this technique, we retrospectively analyzed the difference and correlation between 2D and 3D measurements of native bone coverage in 35 patients (45 hips) with Crowe II or III DDH. Linear regression analysis was performed to examine the intraoperative parameters related to coverage. The mean follow-up period was 7.64 years (range, 6.1-9.5 years).

RESULTS

There was a significant difference and a fair correlation between 2D and 3D measurements. The 2D measurement underestimated the 3D cup coverage by approximately 13%. An excellent linear relationship was noted between the 3D coverage/uncoverage and the height of the uncovered portion (R² = 0.8440, P < .0001). There was no case of loosening or revision during the follow-up.

CONCLUSION

Current minimum cup coverage recommendations based on 2D radiograph measurements should not be used as a direct intraoperative guide. The height of the uncovered portion is a useful parameter to determine the 3D coverage during surgery.

Minimum Lateral Bone Coverage Required for Securing Fixation of Cementless Acetabular Components in Hip Dysplasia

Objectives. To determine the minimum lateral bone coverage required for securing stable fixation of the porous-coated acetabular components (cups) in hip dysplasia. Methods. In total, 215 primary total hip arthroplasties in 199 patients were reviewed. The average follow-up period was 49 months (range: 24–77 months). The lateral bone coverage of the cups was assessed by determining the cup center-edge (cup-CE) angle and the bone coverage index (BCI) from anteroposterior pelvic radiographs. Further, cup fixation was determined using the modified DeLee and Charnley classification system. Results. All cups were judged to show stable fixation by bone ingrowth. The cup-CE angle was less than 0° in 7 hips (3.3%) and the minimum cup-CE angle was −9.2° (BCI: 48.8%). Thin radiolucent lines were observed in 5 hips (2.3%), which were not associated with decreased lateral bone coverage. Loosening, osteolysis, dislocation, or revision was not observed in any of the cases during the follow-up period. Conclusion. A cup-CE angle greater than −10° (BCI > 50%) was acceptable for stable bony fixation of the cup. Considering possible errors in manual implantation, we recommend that the cup position be planned such that the cup-CE angle is greater than 0° (BCI > 60%).

Experimental study of the installation acetabular component with uncoverage in arthroplasty patients with severe developmental hip dysplasia

PURPOSE

The purpose of this study was stimation of optimal percentage of lateral uncoverage of the acetabular component during total hip arthroplasty for patients with severe developmental hip dysplasia.

METHODS

Mathematical computer modeling based on the finite element technique and the mechanical experiment were performed. Critical values of uncoverage enabling safe primary fixation of acetabular component were estimated in designed models.

RESULTS

Using the finite element technique and the mechanical experiment on pelvis models, a possibility of mounting an acetabular component with moderate uncoverage within 25% without screws and with significant uncoverage to 35% with an additional two-screw fixation was demonstrated.

CONCLUSIONS

This study provides additional guidance on optimal acetabular uncoverage assessment and fixation methods of surgeons performing THA on patients with DDH.

Failure of bulk bone grafts after total hip arthroplasty for hip dysplasia

INTRODUCTION

Bulk bone grafts are used in total hip arthroplasty (THA) when adequate acetabular cup coverage cannot be achieved. Data from literature show mainly good short-term and mid-term results with contradictory long-term results. The aim of this study was to investigate acetabular cup stability and graft integrity after dysplastic adult hip reconstruction with total hip endoprosthesis and bulk bone graft for acetabular deficiency.

METHODS

Seventy-two hips in 64 patients that underwent THA with bone autograft or allograft were assessed immediately after operation, 6 months and 1, 2, 3 and 10 years after operation. Acetabular angle, acetabular cup coverage, bone graft width, and bone graft height were measured and questionnaire was designed to determine acetabular cup stability and grade graft integrity. Four investigators graded grafts and inter-rater and intra-rater reliability of the questionnaire was tested.

RESULTS

All measured parameters in all patients and in patients with autograft and those with allograft separately showed significant changes consistent with graft failure and acetabular cup instability when level of significance was set at p < 0.05.

CONCLUSIONS

Results of this study show significant decrease in acetabular cup stability when either autograft or allograft is used for cemented acetabular reconstruction of dysplastic hip. Further, allografts showed twice as rapid failure as autografts. Although these results contradict both good short-term and long-term results in published literature, they present warning for future use of free bulk bone grafts in reconstructive hip surgery.

Total hip arthroplasty with bulk femoral head autograft for acetabular reconstruction in developmental dysplasia of the hip

Developmental hip dysplasia (DDH) presents considerable technical challenges to the primary arthroplasty surgeon. Autogenous bulk grafting using the femoral head has been utilised to achieve anatomic cup placement and superolateral bone coverage in these patients, but reported outcomes on this technique have been mixed with the lack of graft integration and subsequent collapse, an early cause of failures. We describe a novel technique combining the use of bulk autograft with an iliac osteotomy, which provides primary stability and direct cancellous-cancellous bone contact, optimising the environment for early osseointegration. Twenty-one hips in 21 patients with DDH underwent this technique and were followed for a mean of 8.1 years. The preoperative radiographic classification was Crowe type I in 12 hips (57%), type II in 4 hips, and type III in 5 hips, and the mean Sharp angle was 49.6° (range 42°–60°). All grafts united by year. At time of followup, there was no radiographic evidence of graft collapse or loosening. There were no reoperations. Our study has shown that this technique variation combining an iliac osteotomy with bulk autograft in cases of developmental hip dysplasia provides early stability and reliable graft incorporation, together with satisfactory clinical and radiological outcomes in the medium term. Longer term study is necessary to confirm the clinical success of this procedure.

Total hip replacement for developmental dysplasia of the hip with more than 30% lateral uncoverage of uncemented acetabular components

In developmental dysplasia of the hip (DDH), a bone defect is often observed superior to the acetabulum after the reconstruction at the level of the true acetabulum during total hip replacement (THR). However, the essential amount of uncemented acetabular component coverage required for a satisfactory outcome remains controversial. The purpose of this study was to assess the stability and function of acetabular components with a lack of coverage > 30% (31% to 50%). A total of 760 DDH patients underwent THR with acetabular reconstruction at the level of the true floor. Lack of coverage above the acetabular component of > 30% occurred in 56 patients. Intra-operatively, autogenous morcellised bone grafts were used to fill the uncovered portion. Other than two screws inserted through the acetabular shell, no additional structural supports were used in these hips. In all, four patients were lost to follow-up. Therefore, 52 patients (52 hips, 41 women and 11 men) with a mean age of 60.1 years (42 to 78) were available for this study at a mean of 4.8 years (3 to 7). There were no instances of prosthesis revision or marked loosening during the follow-up. The Harris hip score improved from a mean of 40.7 points (sd 12.2) pre-operatively to 91.1 (sd 5.0) at the last follow-up. Radiological analysis with medical imaging software allowed us to calculate the extent of the uncoverage in terms of the uncovered arc of the implant as viewed on the anteroposterior pelvic radiograph. From this we propose that up to 17 mm of lateral undercoverage in the presence of a stable initial implantation in the presence of bone autografting, with an inclination angle of the acetabular component between 40° and 55°, is acceptable. This represents undercoverage of ≤ 50%.

Cite this article: Bone Joint J 2013;95-B:1178–83.

High survivorship of cemented sockets with roof graft for severe acetabular dysplasia

BACKGROUND

Socket fixation in patients with acetabular dysplasia can be technically demanding but the use of structural grafts can help to reconstruct the original center of hip rotation. Because reported survival rates differ, construct survival seems to depend on the technique of graft preparation and fixation.

QUESTIONS/PURPOSES

What is the survivorship of cemented sockets with acetabular roof graft in patients with severe acetabular dysplasia? Do clinical scores equal those of patients without acetabular grafting?

METHODS

We retrospectively reviewed 62 patients (74 hips) who had undergone cemented THA with acetabular roof graft. Mean age at surgery was 45 years (range, 19-71 years). Revisions and radiographic failures were determined and clinical scores (Oxford, SF-12) were obtained and matched to a control group. Kaplan-Meier analysis was used to determine survivorship at a minimum followup of 5 years (mean, 10.4 years; range, 5-16 years).

RESULTS

Survivorship for all-cause revision was 98% (95% CI, 92.5%-100.0%) at 10 years followup. Two hips were revised for aseptic acetabular loosening and one hip for polyethylene wear. All grafts incorporated and no additional radiographic loosenings were seen. Patients with grafting had higher Oxford scores compared with the control group but other scores were equal.

CONCLUSIONS

In contrast to reported series and the common use of cementless cups in patients with developmental dysplasia of the hip, we found high survivorship of cemented sockets with roof graft in severe acetabular dysplasia at a mean followup of more than 10 years. These patients showed higher Oxford scores than patients in a control group. This technique that restores bone stock is a reasonable solution for often young patients with dysplasia.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Total hip replacement in developmental dysplasia using an oval-shaped cementless press-fit cup

PURPOSE

Acetabular roof deficiency due to subluxation of the femoral head (Hartofilakidis type II) increases the complexity of total hip arthroplasty. In these cases some form of support is usually required, to reach stable fixation of the acetabular component. Pursuing this aim, the oval-shaped cementless cranial socket could be an alternative to conventional treatment options.

METHODS

Between 1998 and 2008, 37 patients (40 hips) underwent primary total hip arthroplasty using the cranial socket (mean follow-up 5.6 years, range 26 to 133 months). In a retrospective study we compared these clinical and radiological results with the results of a matched control group consisting of 35 patients (40 hips) treated with a standard cementless hemispherical cup in combination with bulk femoral autografting (mean follow-up 6.9 years, range 30 to 151 months).

RESULTS

There were no statistically significant differences in the HHS (p=0.205) or the SF-36 (p=0.26) between both groups. There was no prosthesis failure due to septic or aseptic loosening. Time of surgery was significantly shorter in the cranial socket group (p<0.001). The acetabular component could be placed in the ideal rotational hip centre in 24 (60%) hips in the cranial socket group and 32 (80%) hips in the control group, respectively.

CONCLUSIONS

Our study indicates, that the cranial socket can be an alternative treatment option for the reconstruction of acetabular deficiency in osteoarthritis secondary to developmental dysplasia.

[Total hip replacement in developmental dysplasia: anatomical features and technical pitfalls]

Total hip arthroplasty is the procedure of choice for most patients with advanced, symptomatic osteoarthritis due to congenital dysplasia of the hip. However, the complexity of arthroplasty is significantly increased because of anatomic abnormalities associated with dysplasia of the hip. In addition the relatively young age of patients may affect survival of the implant. From a biomechanical standpoint the primary surgical objective is reconstruction of the anatomical center of rotation. Independent of the pelvic bone stock the socket should be located as near as possible to the anatomical acetabular location. There are various operative strategies to ascertain sufficient stability of the socket. The anterolateral deficiency of the acetabulum can be reconstructed by bulk femoral autografting or bone impaction grafting. Furthermore controlled perforation of the medial wall or implantation of reinforcement rings and oval sockets have been described. Cementless, biological socket fixation shows superior long-term results compared to cemented cups, especially in these young patients. The location of the reconstructed acetabulum and the desired leg length influence the type of femoral reconstruction and in some cases femoral shortening is required. In this article endoprosthetic reconstructive options for developmental dysplasia of the hip are discussed depending on the femoral and acetabular deformity.

Long-term results of bulk femoral head autograft in cementless THA for developmental hip dysplasia

We evaluated the fate of bulk femoral head autograft in cementless total hip arthroplasty (THA) for developmental hip dysplasia. Of 87 hips (80 patients) studied, 37 hips (32 patients) were available for follow-up at a mean of 18.5 years (range, 15-24 years) postoperatively. The mean age of these 32 patients at the index procedure was 53.8 years (range, 40-65 years). The initial diagnosis was osteoarthritis in all 32 patients. The degree of acetabular dysplasia according to Crowe classification was type I in 18 hips (48.6%), type II in 14 (37.8%), type III in 5 (13.5%). The mean percentage of horizontal coverage of the acetabular components with graft bone was 34% (range, 25%-45%). Trabecular bridging across the graft-host interface was seen at a mean of 4 months (range, 2-6 months) postoperatively. Trabecular reorientation of the grafted bone was seen in all hips at a mean of 27 months (range, 12-36 months) postoperatively. There was no evidence of collapse and bony resorption of the grafted bone in the weight-bearing portion. Acetabular component fixation was stable in all hips at final follow-up. Of the 37 hips (32 patients), 2 acetabular components required revision: 1 for a late postoperative deep infection and 1 for dissociation of the polyethylene liner. The survival rate was 94.5% (95% confidence interval, 91.3-96.5) for the acetabular component at 18.5 years of follow-up. This study found that bulk femoral head autograft in cementless THA for developmental hip dysplasia produces excellent long-term results.

High long-term survival of bulk femoral head autograft for acetabular reconstruction in cementless THA for developmental hip dysplasia

BACKGROUND

Deficient acetabula associated with acetabular dysplasia cause difficulty achieving adequate coverage of the acetabular component during THA. Autografting with the removed femoral head has been used for several decades to achieve better coverage, but the long-term benefits of this technique remain controversial, with some series reporting high rates of graft resorption and collapse.

QUESTIONS/PURPOSES

We evaluated the fate of bulk femoral head autograft for acetabular reconstruction in cementless THA for developmental hip dysplasia.

PATIENTS AND METHODS

We retrospectively reviewed 70 patients (83 hips) (68 women, two men) with a mean age of 57 years at index surgery. According to the classification of Crowe et al. for hip dysplasia, 10 hips were classified as Type I, 45 as Type II, 19 as Type III, and nine as Type IV. Minimum followup was 9 years (mean, 11 years; range, 9-14 years).

RESULTS

We observed no collapsed grafts. In all patients we observed disappearance of the host-graft interface and appearance of radiodense bands in the grafts bridging host iliac bone and at the lateral edges of the acetabular sockets; remodeling with definite trabecular reorientation was seen in 90%. The 10-year survival rate without acetabular revision for any reason was 94%. The mean Merle d'Aubigné and Postel hip score improved from a mean of 9.1 preoperatively to 17.2 at last followup.

CONCLUSIONS

Cementless THA combined with autologous femoral bone graft in patients with developmental dysplasia resulted in a high rate of survival. Structural bone grafting achieved a stable construct until osseointegration occurred. We believe the radiodense bands represent a radiographic sign of successful completion of repair of the deficient acetabulum. Congruous and stable contact of the cancellous portion of the graft to the host bed by impaction and use of improved porous cementless sockets may be associated with successful socket survival.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Long-term outcome of shelf grafts in total hip arthroplasty for developmental hip dysplasia

Primary total hip arthroplasty (THA) in patients with osteoarthrosis secondary to developmental hip dysplasia is often complex due to anterolateral acetabular bone deficiency. The use of femoral head (shelf) autograft during the index arthroplasty provides nonimmunogenic, osteoconductive support with the potential for enhanced bone stock should revision surgery be required. Few long-term studies document the outcome of the use of shelf grafts in primary THA or quantify the need for further bone graft at revision surgery. A retrospective analysis was conducted of a single surgeon's series of 31 THAs performed in 25 patients with developmental hip dysplasia. Postoperative biplanar radiographic analysis was performed at 3 and 6 months and annually thereafter for a mean of 14 years (range, 8-18 years). Grafts were assessed for union, resorption, and displacement. The need for acetabular bone graft at revision surgery was recorded. Bony union was observed in 93% of cases; fibrous union developed in the remaining 7%. There was no graft displacement. In 71% of cases, less than one-third of the graft had resorbed; one-third to one-half had resorbed in the remaining 29% of cases. Of 10 patients revised (all for loosening of the acetabular component), 2 required structural allograft for inadequate bone stock. Femoral head autograft allows effective acetabular coverage with excellent rates of union, exhibits minimal graft resorption in the long-term, and rarely requires further acetabular allograft in revision surgery.

Cementless total hip arthroplasty with medial wall osteotomy for the sequelae of septic arthritis of the hip

Background

We performed a retrospective study to evaluate the results of acetabular circumferential medial wall osteotomy, a procedure designed to provide secure fixation of a cementless hemispherical acetabular cup for the sequelae of septic arthritis of the hip.

Methods

We assessed 38 total hip arthroplasties (THAs) with circumferential acetabular medial wall osteotomies performed on patients with sequelae of septic arthritis of the hip between 1993 and 2000, who were followed up for ≥ 3 years. The average follow-up period was 8.3 years (range, 3 to 12 years). The indication for this technique was poor acetabular cup coverage of ≤ 70% on preoperative templating. In all cases, cementless hemispherical acetabular cups were fixed to the true acetabulum. Additional procedures included soft tissue release in 16 hips and femoral derotational and shortening osteotomies in 12 hips. We evaluated both clinical and radiological results.

Results

The Harris hip scores improved from 57 points preoperatively to 91 points postoperatively. Radiological analysis revealed no aseptic loosening or radiolucent lines around the acetabular cup. Stable bony fixation of the acetabular cup in the true acetabulum was seen in all cases. Acetabular osteolysis was demonstrated in 12 hips. Revision surgery was performed in 6 hips, but there were no complications related to acetabular circumferential medial wall osteotomy.

Conclusions

Circumferential acetabular medial wall osteotomy can provide appropriate positioning and sufficient coverage of the acetabular cup and thus preserve the medial wall thickness in cementless THA without the need for additional bone grafting for the sequelae of septic arthritis of the hip.

Evaluation of the hip center in total hip arthroplasty for old developmental dysplasia

We describe the problems with positioning the hip center according to the severity of dislocation in 97 cementless total hip arthroplasty for developmental dysplasia of the hip. The mean location of the hip center from the interteardrop was 30.4 +/- 8.7 mm horizontally and 23.4 +/- 5.4 mm vertically. The presence of a limp correlated with a superior placement of the cup. Four cups were revised, 2 of which with a significant high hip center. The survival rate of the acetabular component was 95% at 12 years. Craniopodal repositioning was easy in class 1. In class 2, the cup was the largest. In class 3, the greatest variations of the hip center were found. In class 4, the smallest implants were necessary for positioning in the true acetabulum.

Total hip replacement using hemi-circumferential interposition acetabuloplasty for acetabular deficiency in post-Perthes deformities: technique and long-term results

We describe a technique of hemi-circumferential interposition grafting that allows placement of the cup in the anatomical position of the original acetabulum in the rare cases of post-Perthes or Perthes-like deformities of the femoral head combined with a steep and shallow acetabulum. This technique was performed on 10 hips (9 patients, with an average age of 56 years). One revision was performed for septic loosening after 2.1 years; however, the graft was well integrated and provided sufficient support for the revision cup. All the others had a good clinical and radiological result after an average of 11.4 years with an average Harris Hip Score of 97. The authors have found this an easy-to-use method, which can give an excellent, long-lasting result. It also provides important bone stock for possible subsequent revisions.;