Ten-Year Minimum Outcomes and Survivorship With a High Flexion Knee System

Revisiting the universal femoral component: Midterm outcomes of a modern design

Introduction

Approximately 10 years ago a total knee arthroplasty system with a modern universal femoral component was introduced. It includes a symmetrical femoral and tibial component. The purpose of this study was to evaluate the 6-year clinical outcomes of this implant from a single surgeon.

Materials and methods

A retrospective chart review was performed on all patients who received a TJO Klassic® Knee from January 2014 to January 2015 (Total Joint Orthopedics Inc., Salt Lake City, Utah). In total there were 131 patients (149 knees) who underwent total knee arthroplasty with this system. A retrospective chart review was performed including demographics, preoperative and postoperative clinical assessments including Knee Society score (KSS), range of motion, and radiographic assessment.

Results

There were 60 males (45.8 %) and 71 females (54.2 %) with 149 knees available for review. Mean age at time of surgery was 67.4 years (45-91) and BMI was 32.6 kg/m2 (16.6-54.6). The patella was left unresurfaced in 37 knees (24.8 %), KSS scores including the clinical and functional components all improved significantly (p < 0.001). ROM improved significantly (p < 0.001). 9 knees underwent reoperation within 6 years of their index operation: 2 quadriceps tendon repairs, 3 polyethylene exchanges for laxity, 2 two-stage revisions for infection, 1 revision for aseptic loosening of the femur, and 1 for post-traumatic patella fracture.

Conclusion

6-year outcomes of a modern universal femoral design demonstrate excellent clinical results and survivorship equal to modern asymmetrical femur designs. There were no known instances of patellar maltracking.

A high-flexion design total knee prosthesis: a ten to twelve-year follow-up study

BACKGROUND

The purpose of this study was to investigate the clinical and radiographic outcomes and to determine the survivorship of a high-flexion design total knee arthroplasty (TKA) prosthesis, the LOSPA knee system, over a follow-up period of 10-12 years.

METHODS

The study included 386 patients (503 TKAs) who were treated with TKA from 2011 to 2013 (follow-up period 10-12 years).The patients were assessed clinically using range of motion (ROM) of the knee, the Knee Society scoring system (KSS), and the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC). For radiographic analysis, the positions of femoral and tibial implants as α, β, γ, and δ angles, hip knee ankle (HKA) angle, and radiolucent lines were used. Kaplan-Meier survival analysis was performed.

RESULTS

Mean ROM improved significantly from the preoperative baseline of 117.3° to 126.5° at the final follow-up (p < 0.001). The mean KSS and WOMAC scores also both showed significant improvement after surgery (all p < 0.001). A non-progressive radiolucent line less than 2 mm was observed in 23 cases (4.7%). Nine patients underwent revision surgery on the knee during the follow-up period. Revision surgery was performed on four patients due to aseptic loosening, three patients due to infection, one patient due to ankylosis, and one patient due to instability. When the endpoint of survival was the entire surgical cases, the survival rate was 96.2%. The survival rate, with revision for any reason as the endpoint, was 97.2%, and 97.8% for aseptic causes.

CONCLUSIONS

The LOSPA knee system, a high-flexion design total knee prosthesis, showed excellent long-term survivorship and improvements in clinical outcomes at 10- to 12-year follow-up.

Outcomes of Image-Free Robotic Assisted Total Knee Arthroplasty in Patients Who Have Valgus Knee Deformities

BACKGROUND

Valgus knee deformities pose a unique challenge in total knee arthroplasty (TKA) due to the complexity of achieving ligamentous balance and satisfactory alignment compared to varus or neutral deformities. Robotic-assisted (RA) TKA could aid in achieving improved component alignment and balance.

METHODS

We retrospectively evaluated a matched cohort of patients to compare image-free RA-TKA (n = 44) versus conventional manual (CM) TKA (n = 30) techniques in patients who have valgus deformity of 5 to 15 degrees, including radiographic and patient-reported outcomes measures (PROMs) over a 3-year period. The patient reported outcome measures (PROMs) studied to determine outcomes were: Western Ontario McMaster University Arthritis Index, Knee Society Score-Function Score, and Short Form 12-item Survey.

RESULTS

Overall, the RA-TKA cohort showed faster improvement in PROMs (37.16 ± 1 8.8 versus 25.74 ± 17.7, P = .02), shorter length of stay (1.41 versus 2.29 days, P = .02), and shorter operating room times (120.79 versus 123.67 minutes, P = .02) than CM-TK). Additionally, there was no difference in the use of primary versus varus-valgus constrained polyethylene liners between the cohorts.

CONCLUSIONS

In this investigation, RA-TKA yielded a slightly faster patient recovery, more objective measurements of ligamentous balance, and proved noninferior PROMs compared to CM-TKA for preoperative valgus knee deformities.

Minimum 15-Year Survival of a Biconvex Inlay Patellar Component in Primary Total Knee Arthroplasty: An Analysis of 2,530 Total Knee Arthroplasties From a Single Institution

BACKGROUND

Routine patellar resurfacing during primary total knee arthroplasty (TKA) remains controversial. To our knowledge, there are no studies reporting the long-term performance of a cemented biconvex all-polyethylene inlay component implanted at the time of primary TKA. The purpose of this study was to examine the 15-year survivorship and long-term clinical outcomes of this biconvex inlay patella used at our institution.

METHODS

We retrospectively reviewed our prospectively collected institutional database and identified 2,530 patients who underwent cemented TKA with a single prosthetic design (from 1996 to 2007) where the patella was resurfaced using this cemented biconvex inlay patella. The mean age at surgery was 68 years (range, 29 to 93). The mean body mass index was 33.0 (range, 16.4 to 76.3), with 61.9% women. At the time of analysis, the mean time from surgery was 20.4 years (range, 15 to 26). We used Kaplan-Meier analysis to calculate survivorship at 15 years. We analyzed clinical outcomes using 3 patient-reported outcome measures collected prospectively.

RESULTS

The 15-year survivorship with revision surgery for all causes as the end point was 97.1% (95% confidence interval 96.1 to 98.1%). The 15-year survivorship with revision surgery for a patella-related complication as the end point was 99.7% (95% confidence interval 99.4 to 1.0). At the final follow-up, patients showed significant improvement in scores for the Knee Society Clinical Rating System (P < .001), Western Ontario and McMaster University Osteoarthritis Index (P < .001), and Veterans Rand 12-Item Health Survey physical component (P < .001).

CONCLUSIONS

Routine patellar resurfacing using a biconvex inlay patellar component has excellent survivorship and a low rate of complications at 15 years post-TKA.

Impact of implant design on the Forgotten Joint Score: a retrospective study comparing two contemporary knee designs

This retrospective study was designed to assess two fixed bearing total knee design concepts and their clinical outcomes, particularly in Forgotten Joint Score-12 (FJS-12). Patients were assessed clinically using the Knee Society Score (KSS). Participants completed an FJS-12 and a short form of the Knee Injury and Osteoarthritis Outcome Score (KOOS-PS). A total of 216 knees -76 with Genesis II and 150 with Vanguard total knee arthroplasties - were included. Patients in the Vanguard group had significantly better postoperative FJS-12 scores (by 10.1 points, p = 0.019). Differences in KSS subscores also reached the level of statistical significance. KOOS-PS did not differ significantly. Statistically significant differences between the two knee designs on FJS-12, KS and FS assessments were revealed, but overall, these differences may not reach the threshold of clinical significance.

Global mapping of institutional and hospital-based (Level II-IV) arthroplasty registries: a scoping review

PURPOSE

Four joint arthroplasty registries (JARs) levels exist based on the recorded data type. Level I JARs are national registries that record primary data. Hospital or institutional JARs (Level II-IV) document further data (patient-reported outcomes, demographic, radiographic). A worldwide list of Level II-IV JARs must be created to effectively assess and categorize these data.

METHODS

Our study is a systematic scoping review that followed the PRISMA guidelines and included 648 studies. Based on their publications, the study aimed to map the existing Level II-IV JARs worldwide. The secondary aim was to record their lifetime, publications' number and frequency and recognise differences with national JARs.

RESULTS

One hundred five Level II-IV JARs were identified. Forty-eight hospital-based, 45 institutional, and 12 regional JARs. Fifty JARs were found in America, 39 in Europe, nine in Asia, six in Oceania and one in Africa. They have published 485 cohorts, 91 case-series, 49 case-control, nine cross-sectional studies, eight registry protocols and six randomized trials. Most cohort studies were retrospective. Twenty-three per cent of papers studied patient-reported outcomes, 21.45% surgical complications, 13.73% postoperative clinical and 5.25% radiographic outcomes, and 11.88% were survival analyses. Forty-four JARs have published only one paper. Level I JARs primarily publish implant revision risk annual reports, while Level IV JARs collect comprehensive data to conduct retrospective cohort studies.

CONCLUSIONS

This is the first study mapping all Level II-IV JARs worldwide. Most JARs are found in Europe and America, reporting on retrospective cohorts, but only a few report on studies systematically.

Cementing techniques for total knee arthroplasty in Norwegian hospitals; a questionnaire-based study

BACKGROUND

Cementing technique in total knee arthroplasty (TKA) may influence implant survival. There is limited knowledge about the results with clinically used techniques. The aim of this study was to investigate cementing techniques for TKA in Norwegian hospitals, to compare widely used techniques to recommendations from the literature, and to investigate variation within hospitals.

METHODS

A questionnaire requesting information about cementing techniques were distributed to all Norwegian orthopedic surgeons performing TKAs regularly in 2020. Data was analyzed using descriptive statistical methods.

RESULTS

We acquired 121 responses out of 257 surgeons. They were from 45 out of 56 hospitals, and at least half of the TKA surgeons from 20 hospitals, constituting 79 surgeons. All responders used pulsatile lavage. Cement application to both the tibial plateau and stem (full cementation) was practiced by 61%. Application of cement to both implant and bone was done by 70% of surgeons. Techniques to improve cement penetration were used by 86%. Only 35% of surgeons aimed to get a cement mantle thickness between 3-5 mm. Flexing the knee joint to remove excess cement was done by 82%. We found that in 55% of 20 hospitals the surgeons did not agree on the use of common guidelines in their ward.

CONCLUSIONS

The majority of the responders used recommended techniques from the literature when cementing TKA. At more than half of the eligible hospitals, surgeons disagreed about their hospitals' use of common guidelines. Focusing on developing evidence-based guidelines would be beneficial for TKA-quality.

CT scan analysis of implant mating comparing APA versus TEA in simultaneous bilateral TKA: One technique per knee

BACKGROUND

The optimal landmark for setting femoral component rotation in primary TKA remains a debate. This study compares the Anterior-Posterior Axis (APA) versus the Transepicondylar Axis (TEA) in patients undergoing simultaneous bilateral TKA, where one reference line was randomized to each knee. Implant mating was assessed via post-operative CT scans.

METHOD

The study included 32 patients with osteoarthritis in both knees with similar varus deformities. All patients underwent the same surgical procedure on both knees, aside from the selected femoral rotation axis line: APA randomized to one side and TEA to the contralateral. Post-operative CT scans were performed in extension to assess in-vivo mating.

RESULTS

CT scan analysis showed mean rotation of the femoral implant externally rotated relative to the radiographic TEA with no significant difference between the APA and TEA groups (p = 0.28). Tibial implant rotation was also externally rotated to the radiographic TEA with no significant difference (p = 0.59). Femoral-tibial implant mating showed a mean external rotation of the tibia relative to the femur in both groups: 0.86 ± 4.0° external rotation in the APA group and 0.23 ± 3.7° external rotation in the TEA group. There was no significant difference between groups (p = 0.52). The range of mating mismatch was 15° in the APA group and 16.5° in the TEA group.

CONCLUSIONS

When using a measured resection, posterior referencing technique, post-operative femoral-tibial implant mating measured by CT scan showed no superiority comparing the APA method versus the TEA method.

LEVEL OF EVIDENCE

2 Randomized prospective study.

Is Highly Cross-Linked Polyethylene Safe for Use in High-Flexion Posterior Stabilized Total Knee Arthroplasty?

BACKGROUND

Application of highly cross-linked polyethylene (HXLPE) to a posterior cruciate-substituting total knee arthroplasty (TKA) might add the risk of fracture and failure of the tibial polyethylene insert. The purpose of this study is to evaluate the long-term (up to 19 years) clinical and radiographic results of posterior cruciate-substituting TKAs with HXLPE or conventional polyethylene.

METHODS

This study analyzed the results of 1,217 patients (444 men and 773 women; mean age of 65 ± 7 years, range, 31-85) (2,434 knees) who had received a NexGen LPS-Flex prosthesis with a conventional tibial insert in one knee and the same prosthesis with an HXLPE tibial insert in the contralateral knee. The mean duration of follow-up was 17 years (range, 15-19).

RESULTS

The 2 groups did not differ significantly (P > .05) with regard to the clinical and radiographic results. No knee in either group had a fracture of the tibial polyethylene post or failure of the locking mechanism of the tibial polyethylene insert or osteolysis. Twenty-eight knees (2.3%) in the HXLPE group and 26 knees (2.1%) in the conventional polyethylene group were revised. The estimated survival rate at 17 years was 97.7% in the HXLPE group and 97.9% in the conventional polyethylene group.

CONCLUSION

The data suggest that clinical and radiographic findings at a mean of 17 years after posterior cruciate-substituting TKA are the same for patients treated with HXLPE and those treated with conventional polyethylene.

The importance of selecting a cruciate-retaining total knee prosthesis for a patient with a large physiological posterior tibial slope: a case report

For Japanese individuals, deep bending is inevitable in their daily lives, such as during seiza sitting and kneeling. Thus, achieving a good post-operative range of motion is an important factor in improving patient satisfaction. Even normal knees often have a posterior tibial slope of more than 10°. We report the case of a 76-year-old woman who underwent proximal tibial osteotomy at 8° with the Vanguard Knee cruciate retaining total knee arthroplasty (TKA) system. She required the revision TKA 10 years later due to ultra-high-molecular-weight polyethylene wear and breakage of the posteromedial tibial component.

Different squatting positions after total knee arthroplasty: A retrospective study

BACKGROUND

Total knee arthroplasty (TKA) has been shown to improve quality of life and reduce pain. High-flexion activities such as squatting, kneeling, and floor transfers are mainly listed as demanding tasks. Among them, squatting is an important position.

AIM

To provide a new squat position classification and evaluate the different squatting positions of a series of patients after primary TKA.

METHODS

From May 2018 to October 2019, we retrospectively reviewed 154 video recordings of the squatting-related motions of patients after TKA. Among the included patients, 119 were women and 35 were men. Their mean age at the index surgery was 61.4 years (range, 30 to 77).

RESULTS

The median follow-up was 12 mo (range, 6 to 156 mo). We classified those squatting-related motions into three major variations according to squatting depth: Half squat, parallel squat, and deep squat. The angles of hip flexion, knee flexion, and ankle dorsiflexion were measured in the screenshots captured from the videos at the moment of squatting nadir. A total of 26 patients were classified as half squats, 75 as parallel squats, and 53 as deep squats. The angles of hip flexion, knee flexion, and ankle dorsiflexion all differed significantly among the three squatting positions (P < 0.001). In the parallel squat group, the mean knee flexion angle (°) was 116.5 (SD, 8.1; range, 97 to 137). In the deep squat group, the mean knee flexion angle (°) was 132.5 (SD, 9.3; range, 116 to 158).

CONCLUSION

Among the three squatting positions, deep squat showed the highest hip, knee, and ankle flexion angles, followed by the parallel squat. With the improvement of squatting ability, the patient's postoperative satisfaction rate was also significantly enhanced. However, the different squatting abilities of the patients cannot be effectively distinguished from the scoring results (P > 0.05). Our squatting position classification offers a pragmatic approach to evaluating patients’ squatting ability after TKA.

Improved surgical procedure of primary constrained total knee arthroplasty which enables use of the femoral diaphyseal straight extension stem

Background

In performing primary constrained total knee arthroplasties (TKA) to imbalanced knees, the offset stem is sometimes compelled to use, although this is associated with surgical difficulties. We developed a modified procedure which might be able to fit the anteroposterior (AP) and mediolateral (ML) position of the femoral component simultaneously with the straight stem. Purposes of this study were to evaluate usefulness of the modified procedure both in computer simulations and actual surgeries.

Methods

We included 32 knees that had undergone primary TKA using constrained implants because of the coronal imbalance. In the component-first procedure, the distal femur was prepared to fit the AP and ML position of the femoral component simultaneously at first, as in primary TKA. Finally, the stem hole is created based on the femoral component position (the component-first procedure). The femoral component and extension stem were simulated using the three-dimensional planning software (ZedKnee) following the component-first procedure. We investigated the suitability of the straight stem through computer simulation and evaluation of actual surgeries. Clinical and radiographical outcomes were also evaluated at the latest follow-up.

Results

The component-first procedure enabled the AP and ML position of the femoral component to be fitted simultaneously with the straight stem in simulations and actual surgeries in all cases. The stem diameter was not significantly different between simulations and actual surgeries (13.9 and 13.7 mm on average, respectively, p = 0.479) and almost similar from intraclass correlation coefficient analysis (kappa value 0.790). Clinical and radiographical outcomes were almost similar to primary TKA cases and there was no case of component loosening, cortical bone hypertrophy around the stem and stem-tip pain.

Conclusions

Our improved surgical procedure may facilitate use of the constrained implant for more cases of primary TKA in imbalanced knees without the usual surgical difficulties.

Trial registration

Retrospectively registered.

Is high flexion total knee arthroplasty a rewarding procedure? An updated meta-analysis of prospective randomized controlled trials

INTRODUCTION

The aim of this study is to provide an updated meta-analysis comparing the benefits and clinical outcomes between high flexion (HF)-TKA and standard (S)-TKA.

MATERIALS AND METHODS

A detailed database analysis was carried out using Web of Science, PubMed, EMBASE, Cochrane Library, MEDLINE and Clinicaltrial.gov, to identify eligible studies. The meta-analysis and sensitivity analysis were performed using Review Manager 5.3 software and STATA 12.0.

RESULTS

Twenty-two randomized control trials (RCTs), including 2841 patients and 4268 knees, were eligible for the meta-analysis. The pooled results of subgroup analysis reveal that there was significant difference between HF-TKA and S-TKA in each subgroup in terms of postoperative ROM, with a higher degree of knee flexion for HF-TKA than S-TKA. However, no statistical difference was identified between HF-TKA and S-TKA in other clinical outcomes including various functional scores and complications.

CONCLUSIONS

On the basis of this meta-analysis, we can recommended HF-TKA as an alternative choice to S-TKA for patients requiring higher knee flexion in their daily activities.

Midterm Outcomes and Survivorship of Anterior Stabilized Versus Cruciate Retaining Bearing in Primary Total Knee Arthroplasty

BACKGROUND

There has been increasing utilization of ultracongruent bearings with a cruciate retaining (CR) femoral component in primary total knee arthroplasty. The purpose of this study is to compare outcomes and survivorship between an ultracongruent anterior stabilized (AS) and CR bearing.

METHODS

A retrospective review was performed from 2010 through 2014 of all primary total knee arthroplasties with a single knee systems identical CR femur and AS or CR bearing with minimum 2-year follow-up yielding a study cohort of 3323 patients (4164 knees). Knee range of motion, Knee Society pain scores, Knee Society clinical scores, Knee Society functional scores, and University of California Los Angeles activity scores were evaluated. The need for manipulation under anesthesia (MUA), nonrevision surgery and revisions were assessed.

RESULTS

AS bearing was used in 1471 knees (35%) and CR bearing used in 2693 knees (65%). Mean follow-up was 5.4 years. The AS group had significantly higher improvements in knee range of motion, Knee Society clinical, Knee Society functional, and Knee Society pain scores. MUAs were performed on 120 knees (8.2%) in the AS group compared with 158 knees (5.9%) in the CR group (P = .005). The AS group had significantly less all-cause failure, aseptic failures, revisions for instability, and revisions for isolated polyethylene wear. The 10-year aseptic survival for AS was 98.3% and for 92.3% for the CR group (P = .002).

CONCLUSION

These mid-term results demonstrate the AS bearing had significantly higher improvements in clinical and functional outcomes as well as greater survivorship. Knees in which an AS bearing was used did have a higher incidence of MUA.

20-Year Minimum Outcomes and Survival Rate of High-Flexion Versus Standard Total Knee Arthroplasty

BACKGROUND

There are conflicting reports of early and mid-term results of the high-flexion total knee arthroplasties (TKAs). The purpose of the present long-term follow-up study was to determine the long-term (minimum 20 years) clinical and radiographic and CT scan results, and the survival rates of high-flexion versus standard TKAs.

METHODS

Ninety-five patients (190 knees) were included (mean age, 65 ± 6.5 years). The mean follow-up was 20.3 years (range, 20 to 20.6 years).

RESULTS

Revision of the TKA was performed in 5 knees (5.2%) with high-flexion TKA and in 3 knees (3.2%) with standard TKA. The rate of survival at 20 years was 94.8% (95% CI, 91%-98%) in the high-flexion TKA group and 96.8% (95% CI, 92%-100%) in the standard TKA group with reoperation for any reason. No knee had osteolysis in either group.

CONCLUSIONS

At this length of follow-up, high-flexion TKA has comparable outcomes and survivorship to standard TKA.

Early Outcomes of an Alternative Bearing Surface in Primary Total Knee Arthroplasty in Patients with Self-reported Metal Allergy

Background

Most implants for total knee arthroplasty (TKA) are comprised of alloys that contain nickel. Controversy exists whether metal allergies produce negative effects and affect clinical outcomes. The purpose of this study was to retrospectively review a minimum 2-year follow-up with an ion-bombarded titanium TKA implant in patients with reported metal sensitivity.

Methods

A retrospective review of patients who underwent primary TKA with the ion-bombarded titanium Vanguard (Zimmer Biomet, Warsaw, IN) implant with 2-year minimum follow-up was performed from 2008 through 2017. The query revealed 346 patients (451 knees) with minimum 2-year follow-up. The mean age was 64.7 years, the mean body mass index was 35.1 kg/m², and 95% of patients were women.

Results

The mean follow-up was 4.6 years. The mean range of motion improved from 109° to 112° (P = .03), University of California Los Angeles activity scale from 4.1 to 5.1 (P < .001), Knee Society Clinical scores from 36 to 89 (P < .001), and Knee Society Functional scores from 48 to 73 (P < .001). There were 5 (1.1%) revisions: 2 infections (2-staged exchange), 1 tibial revision for aseptic loosening after a fall, and 2 bearing exchanges for instability. Other surgeries were open reduction internal fixation of periprosthetic fracture, 1 arthroscopic release of snapping popliteus, and 4 local wound incision and debridement (2 superficial infections and 2 nonhealing wounds). Manipulation under anesthesia was required in 27 (6%) patients.

Conclusions

These early results are encouraging for the use of alternative metal titanium alloy implants in metal-sensitive patients undergoing primary TKA. At 4.6 years of mean follow-up, patients had substantial improvement in the range of motion and clinical outcomes with a low frequency of revision.