Mean 16-Year Results of Total Hip Arthroplasty with Alumina Ceramic Femoral Heads on Highly Cross-Linked Polyethylene in Patients 50 Years or Less

Effect of head size, head material, and radiation dose on the repeatability of CT-RSA measurements of femoral head penetration

BACKGROUND

The risk of early revision of total hip arthroplasty (THA) for polyethylene wear is now low, but there remains a need to perform wear measurements in patients for clinical surveillance. The gold standard of wear measurements has been radiostereometric analysis (RSA), which has limited availability. The use of computed tomography (CT) to perform THA wear measurement was described a decade ago and found to have acceptable accuracy and precision, but high radiation dose was a concern. Additionally, the use of larger femoral head sizes and ceramic femoral heads has risen in the past decade. The objectives of the study were to determine the effect of femoral head size, femoral head material, and lowered radiation dose on femoral head penetration measurement repeatability.

METHODS

A cadaveric hip was implanted with a cementless THA implant system. CT scans were acquired at a conventional radiation dose and at a reduced dose and repeated for a 32 mm and 36 mm cobalt-chromium femoral heads and a 32 mm ceramic femoral head. Apparent translation of the femoral head versus the acetabular cup was measured between the repeated scans using a CT-RSA software, where deviations from zero indicated measurement precision.

RESULTS

The mean and standard deviation of translations in all planes was <0.200 mm. There was no effect for 3D translation of increasing cobalt-chromium head size (p = 0.2252). Cobalt-chromium heads had superior repeatability compared to ceramic heads at reduced dose (p = 0.022), but not at conventional dose (p = 0.1265). Further, superior repeatability was achieved with the reduced dose scan for the cobalt-chromium head (p = 0.0058), however there was no difference between doses for the ceramic head (p = 0.8148).

DISCUSSION

CT-based wear measurement repeatability is excellent and consistent with prior literature even when implementing a larger femoral head, a ceramic femoral head, or reducing radiation dose to 25% of a conventional clinical scan.

Highly Cross-Linked Polyethylene in Patients 50 Years of Age and Younger: A 20-year Follow-Up Analysis

BACKGROUND

Highly cross-linked polyethylene (HXLPE) has been an excellent bearing for total hip arthroplasty (THA) due to improved wear characteristics compared to conventional materials. Patients 50 years of age or younger are at high risk for wear-related complications of their THA, and few studies have followed these patients who have HXPLE into the third decade.

METHODS

In a retrospective review of 88 consecutive THAs performed in 77 patients aged 50 years and younger (mean 41; range, 20 to 50), in which HXLPE was utilized, they were evaluated for their clinical and radiographic results at an average of 20-year follow-up (range, 18 to 24). The current study reports on longer-term follow-up from our previously published series at shorter follow-up times. Patients were categorized by femoral head material: cobalt chrome (n = 14), ceramic (n = 30), and oxidized zirconium (n = 22) and by femoral head size: 26 mm (n = 12), 28 mm (n = 46), and 32 mm (n = 8). Harris Hip Scores were collected preoperatively and at the most recent follow-up. Radiographs were evaluated for linear and volumetric wear, radiolucent lines, and osteolysis.

RESULTS

Mean Harris Hip Scores improved from 47.1 (standard deviation [SD] 8.8) preoperatively to 92.0 (SD 7.7) (P < .0001) at 20-year follow-up. There was one hip that was revised for recurrent instability, and no hip demonstrated radiographic evidence of loosening or osteolysis. The mean polyethylene linear wear rate was 0.017 (SD 0.012) mm/y, and the mean polyethylene volumetric wear rate was 3.15 (SD 2.8) mm3/year, with no significant differences based on articulation type or head size.

CONCLUSIONS

Total hip arthroplasty with HXLPE in patients ≤ 50 years of age continues to demonstrate excellent long-term clinical and radiographic outcomes with low wear characteristics at 20-year follow-up, regardless of femoral head material or size.

Wear, Osteolysis, and Aseptic Loosening Following Total Hip Arthroplasty in Young Patients with Highly Cross-Linked Polyethylene: A Review of Studies with a Follow-Up of over 15 Years

Total hip arthroplasty (THA) has in recent years trended toward a younger, more physically demanding patient population. Mid- to long-term studies of all ages of THA patients using highly cross-linked polyethylene (HXLPE) have been favorable, but concerns about its long-term failure and wear-related complications remain for young THA patients. In this narrative review, a search of the PubMed/MEDLINE and Cochrane databases was performed, and we identified six studies with a minimum 15-year follow-up of HXLPE with various femoral head materials. Wear-related revisions were exceedingly low for patients under the age of 55, with variable reports of non-clinically significant osteolysis. Higher activity levels, a larger femoral head size, and femoral head material were not associated with greater long-term wear rates. Young THA with metal or ceramic on HXLPE is exceedingly durable with favorable outcomes at follow-ups of over 15 years.

Updating Osteonecrosis of the Femoral Head

Osteonecrosis of the femoral head (ONFH), a condition characterized by the presence of a necrotic bone lesion in the femoral head, is caused by a disruption in the blood supply. Its occurrence is more common in young and middle-aged adults and it is the main reason for performance of total hip arthroplasty in this age group. Its incidence is increasing along with increased use of glucocorticoids for management of adjuvant therapy for treatment of leukemia as well as organ transplantation and other myelogenous diseases. Current information on etiology and pathogenesis, as well as natural history, stage system, and treatments is provided in this review. A description of the Association Research Circulation Osseous (ARCO) criteria for classification of glucocorticoids- and alcohol-associated ONFH, 2019 ARCO staging system, and 2021 ARCO classification using computed tomography for the early stages of ONFH is also provided.