Preliminary experience of fully arthroscopic repair of triangular fibrocartilage complex lesions

A new arthroscopic repair technique for triangular fibrocartilage complex using an intracapsular suture: an outside-in transfer all-inside repair

BACKGROUND

Arthroscopic repair is a promising, minimally invasive surgical technique for patients with Palmer type 1B peripheral triangular fibrocartilage complex (TFCC) tears. Although several arthroscopic techniques are effective for repairing Palmer type 1B TFCC tears, some shortcomings remain. So, we report an arthroscopic repair technique for the treatment of Palmer type 1B Atzei class 1 TFCC tears using an intracapsular suture: an outside-in transfer all-inside repair.

METHODS

A retrospective analysis of 38 Palmer type 1B TFCC injury patients admitted to our hospital were randomly divided into 2 groups. The group A was sutured from the outside to the inside, with a total of 21 cases; the group B was sutured with the new arthroscopic repair technique, with a total of 17 cases. Observe and compare the VAS scores and modified Mayo wrist function scores of all patients before 3, and 6 months after the operation and evaluate the incidence of thread knots in patients with different treatment methods. The methodology was performed an arthroscopic intracapsular suture using an outside-in transfer, all-inside repair technique, which is a modified method of the outside-in and all-inside technique using the needle of a 10-mL sterile syringe, for Palmer type 1B TFCC tears. A No. 2 polydioxanone suture was threaded through the needle and entered the wrist joint. Next, the needle was withdrawn carefully along the suture to the proximal tear ulnar surface of the TFCC and penetrated the TFCC, exiting the articular cavity surface of the ulnar side of the torn TFCC. Finally, arthroscopic knotting was performed.

RESULTS

This new treatment was as effective as the previously arthroscopic techniques and had the advantages of no additional incision and decreased risk of operation-related complications. The incidence of thread knots in the group A (28.57%) was significantly higher than that in the group B (0%), and the difference was statistically significant (P = 0.024). There was no significant difference in VAS score and modified Mayo wrist function scores between the two groups (P > 0.05).

CONCLUSIONS

The outside-in transfer, the all-inside repair technique is suitable for Palmer type 1B Atzei class 1 TFCC tears. We recommend this technique as a useful alternative to the conventional methods of repairing Palmer type 1B TFCC tears.

Improved Outside-In Suture through the Joint Capsule to Repair the Palmer I-B Triangular Fibrocartilage Complex Superficial Injury

BACKGROUND

The treatment of type I-B triangular fibrocartilage complex superficial injury is always a challenge to orthopedists. The traditional outside-in suture method often causes a risk of nervous irritation. We designed a modified outside-in suture through the joint capsule to repair the Palmer I-B triangular fibrocartilage complex superficial injury.

METHODS

From December 2014 to December 2018, we retrospectively collected the medical records of 18 patients in our hospital who used the modified outside-in suture through the joint capsule to repair type I-B triangular fibrocartilage complex superficial injury. Among them, there were 12 males and 6 females, with an average age of 36.2 years. There were 6 cases on the left side and 12 cases on the right side. Record the healing time of all patients after surgery and the occurrence of related complications, and record the pain visual analogue scale (VAS), grip strength, wrist flexion and extension, radioulnar deviation and forearm rotation range of motion, modified Mayo wrist joint function score, and disability of arm-shoulder-hand (DASH) score before operation and at the last follow-up.

RESULTS

One patient was lost to follow-up, and a total of 17 patients received the final follow-up. Patients were followed up for 24 to 36 months, with an average of 29.6 ± 3.0 months. No wound infection, nerve damage, or irritation occurred after the operation. At the last follow-up, 15 cases of wrist pain disappeared completely, and 2 cases had mild discomfort during exercise. At the last follow-up, VAS decreased from 3.8 ± 0.7 points before operation to 0.8 ± 0.7 points (P < 0.05); grip strength increased from 15.1 ± 3.1 kg before operation to 23.2 ± 1.5 kg (P < 0.05); wrist flexion and extension, radioulnar deflection, and forearm rotational mobility increased from 116.3 ± 2.2°, 37.0 ± 3.5°, and 141.6 ± 2.2° before operation to 117.2 ± 2.5° (P < 0.05), 38.9 ± 3.0° (P < 0.05), and 142.4 ± 1.9° (P < 0.05), respectively; the modified Mayo wrist joint function score increased from 66.1 ± 3.6 points to 82.5 ± 3.9 points (P < 0.05), of which 10 cases were excellent, 5 cases were good, 2 cases were fair, and the excellent and good rate was 88.2%; DASH score improved from 37.0 ± 5.7 points preoperatively to 8.0 ± 2.5 points (P < 0.05).

CONCLUSION

The modified outside-in suture through the joint capsule to repair the superficial injury of Palmer I-B triangular fibrocartilage complex has a good clinical effect and is worthy of clinical widespread promotion.

Long-Term Outcomes of All-Arthroscopic Pre-Tied Suture Device Triangular Fibrocartilage Complex Repair

Background  A pre-tied suture device has been utilized for all-arthroscopic peripheral triangular fibrocartilage complex (TFCC) repairs with promising early clinical results. Purpose  The purpose of this study was to evaluate long-term functional outcomes of these repairs. Patients and Methods  A retrospective review of patients undergoing arthroscopic TFCC repair was performed. Inclusion criteria were the Palmer type 1B TFCC tears diagnosed on arthroscopy and repaired using the all-arthroscopic pre-tied suture device. Patients with any evidence of concomitant wrist injury at the time of surgery, history of prior wrist surgery, or nonrepairable and nonperipheral TFCC tears were excluded. Postoperative complications, range of motion, grip strength, and outcome assessments were recorded for each patient. Results  Eleven patients (mean age, 36 years; range, 20-64 years) satisfied our inclusion criteria and comprised the study cohort. The mean follow-up period was 7.0 years (range, 4.3-10.9 years). Mean range of motion of the wrist revealed flexion of 76 ± 11 degrees and extension of 73 ± 12 degrees. Mean grip strength was 98 ± 15% of the nonsurgical extremity. QuickDASH, modified Mayo, and patient-rated wrist evaluation (PRWE) average scores were 9 ± 8, 80 ± 6, and 12 ± 12, respectively. No surgical complications were observed and no patient required any further surgical intervention. Conclusions  Our cohort of patients following all-arthroscopic pre-tied suture device repair of isolated Palmer type 1B TFCC tears demonstrated excellent clinical function at a mean follow-up of 7 years. These findings indicate that the pre-tied suture device is a reliable, safe, effective, and most importantly, durable treatment option for repair of peripheral TFCC tears. Level of Evidence  This is a Level IV, therapeutic study.

Chronologic and Geographic Trends of Triangular Fibrocartilage Complex Repair

This article shows trends in triangular fibrocartilage complex (TFCC) repair since 1990 by geographic area and year. The repair methods presented in the literature were inside-out, outside-in, all-inside, and open repair. The outside-in technique was reported most often for ulnar-side tears, whereas the inside-out technique was reported most frequently for radial-side tears. Recently, a foveal reattachment technique for ulnar-side tears has garnered attention and has been reported with increasing frequency, especially in Asia, because the deepest portion of TFCC, attached to fovea, plays a key role in stabilizing the distal radioulnar joint. Understanding these trends can help clinicians best treat TFCC tears.

Arthroscopic repair of triangular fibrocartilage tears: a biomechanical comparison of a knotless suture anchor and the traditional outside-in repairs

PURPOSE

To compare the biomechanical strength of a knotless suture anchor repair and the traditional outside-in repair of peripheral triangular fibrocartilage complex (TFCC) tears in a cadaveric model.

METHODS

We dissected the distal ulna and TFCC from 6 matched cadaveric wrist pairs and made iatrogenic complete peripheral TFCC tears in each wrist. In 6 wrists, the TFCC tears were repaired using the standard outside-in technique using 2 2-0 polydioxane sutures placed in a vertical mattress fashion. In the other 6 wrists, we repaired the TFCC tears using mini-pushlock suture anchors to the fovea. The strength of the repairs was then determined using a materials testing machine with the load placed across the repair site. We loaded the repairs until a gap of 2 mm formed across the repair site, and then subsequently loaded them to failure. Thus, for each repair we obtained the load at 2-mm gap formation, load to failure, and mode of failure.

RESULTS

At the 2-mm gap formation, the suture anchor repairs were statistically stronger than the outside-in repairs. For load to failure, the suture anchor repairs were also statistically stronger than the outside-in repairs. Failure in both techniques occurred most commonly as suture pull-out from the soft tissues.

CONCLUSIONS

The all-arthroscopic suture anchor TFCC repair was biomechanically stronger than an outside-in repair.

CLINICAL RELEVANCE

The suture anchor technique allows for repair of both the superficial and deep layers of the articular disk directly to bone, restoring the native TFCC anatomy. By being knotless, the suture anchor repair avoids irritation to the surrounding soft tissues by suture knots.

Arthroscopic all-inside repair of Palmer type 1B triangular fibrocartilage complex tears: a technical note

Arthroscopic repair of peripheral dorso-ulnar triangular fibrocartilage complex (TFCC) lesions is now a preferred method. Both outside-in and inside-out techniques are commonly performed for repairing Palmer type 1B TFCC tear. But these techniques have disadvantages of making an additional skin incision to tie knots subcutaneously over the capsule. We performed an arthroscopic all-inside repair technique of Palmer type 1B TFCC tears, which is a modified method of the outside-in technique using a spinal needle. This all-inside technique is as simple as previously described arthroscopic techniques and also has advantages of vertical mattress suture and no additional incision. We recommend this technique as a useful alternative to the others for repairing Palmer type 1B TFCC tear.