A prospective therapeutic comparison of simple suture repairs to massive cuff stitch repairs for treatment of small- and medium-sized rotator cuff tears

The influence of sex is a neglected focus in rotator cuff repair: A systematic review and meta-analysis

PURPOSE

Rotator cuff (RC) disorders are the most common cause of shoulder disability. The aim of this study was to quantify the evidence on the sex-related differences in RC repair.

METHODS

A systematic review of the literature was performed in January 2023 in PubMed, Wiley Cochrane Library and Web of Science on research articles on humans with RC tears treated surgically. A meta-analysis was performed to compare results in men and women. The Downs and Black score and the modified Coleman methodology score (MCMS) were used to assess the retrieved studies.

RESULTS

A total of 39,909 patients were enroled in the 401 studies analysed (45% women, 55% men). A trend toward more sex-balanced recruitment was observed over time. Only 4% of the studies on 1.5% of the documented patients presented disaggregated outcome data and were quantitatively analysed. A tendency for lower range of motion values after surgery was found for external shoulder rotation in women, with 39.9° ± 6.9° versus 45.3° ± 4.1° in men (p = 0.066). According to Downs and Black scores, four studies were good and 12 fair, with a main MCMS score of 69/100.

CONCLUSION

There is a lack of awareness on the importance to document women- and men-specific data. Only 4% of the articles disaggregated data, and it was possible to analyse only 1.5% of the literature population, a sample which cannot be considered representative of all patients. The lack of disaggregated data is alarming and calls for action to better study men and women differences to optimise the management of RC tears. This will be necessary to provide sex-specific information that could be of clinical relevance when managing RC repair.

LEVEL OF EVIDENCE

Level IV.

Role of Delay Between Injury and Surgery on the Outcomes of Rotator Cuff Repair: A Systematic Review and Meta-analysis

BACKGROUND

Outcomes of rotator cuff repair (RCR) are influenced by several well-described factors, but the role of delay from injury to surgery on the outcomes is not clear.

PURPOSE

To assess the role of delay to surgery on the outcomes of RCR in the literature.

STUDY DESIGN

Systematic review with meta-analysis; Level of evidence, 4.

METHODS

PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines were followed. All studies assessing outcomes after RCR-either retear rates or patient-reported outcome measures (PROMs)-and reporting delay to surgery were identified through June 2021 in PubMed, Embase, and Cochrane. Inclusion criteria consisted of traumatic injuries, mean age <65 years, minimum 6-month follow-up, and assessment of retear rates with radiologic examination or reporting of PROMs. Random-effect models were used to assess outcomes, reported in odds ratio (OR) or mean difference (MD) with 95% CIs.

RESULTS

A total of 8118 patients were included from 33 studies, with a mean age of 59 years (range, 53-64) and mean follow-up of 3.0 years (range, 0.5-8.2), among whom 53% were male and 74% had dominant-side injury. Patients undergoing surgery >3 months after injury did not have significantly higher retear rates (OR, 1.1 [95% CI, 0.5 to 3.1]; P = .700), lower Constant-Murley score (MD, -6.2 [95% CI, -16.4 to 4.1]; P = .240), or lower ASES score (American Shoulder and Elbow Surgeons; MD, -12.9 [95% CI, -26.0 to -0.2]; P = .050) compared with those having surgery within 3 months. Similarly, delaying surgery for 6 months did not result in higher retear rates (OR, 1.7 [95% CI, 0.8 to 3.7]; P = .190) or lower PROMs. Delaying surgery for 1 year, however, led to an increased likelihood of retear when compared with <1 year (OR, 2.9 [95% CI, 2.1 to 4.0]; P < .001), and this was similar for the 2-year cutoff (OR, 5.9 [95% CI, 1.1 to 32.1]; P = .040). It was also noted that patients with an intact cuff at follow-up had a mean 3.9 months' shorter time from injury to surgery than patients with retear (95% CI, 1.0-6.8 months; P = .009).

CONCLUSION

This systematic review with meta-analysis found that delaying rotator cuff surgery for 3 to 6 months did not lead to higher retear rates or inferior PROMs as compared with undergoing earlier surgery. However, delaying surgery for ≥1 year clearly resulted in higher retear rates after RCR. This study is limited by relying on retrospective studies, and larger prospective studies are needed to confirm these findings.

REGISTRATION

CRD42021240720 (PROSPERO).

Does structural integrity following rotator cuff repair affect functional outcomes and pain scores? A meta-analysis

BACKGROUND

To assess whether the integrity of rotator cuff repairs has an impact on functional outcomes, as well as pain scores, after surgery.

METHODS

Systematic review and meta-analyses performed for Level Ι, ΙΙ and ΙΙΙ studies that presented functional outcome scores and radiological assessment of integrity following rotator cuff repair. Extracted data included patient demographics, functional outcome scores [Constant Score, University of California at Los Angeles (UCLA) shoulder score, American Shoulder and Elbow Surgeons (ASES) shoulder score, visual analogue scale (VAS) Pain score], as well as assessment of repair integrity on radiological investigations. A meta-analysis was performed using weighted means and a random effects model.

RESULTS

Twelve studies were included in the final analysis. Average re-tear rate for the 800 included patients was 22% at a mean follow-up of 27.5 months after surgery. Patients with intact repairs had a significantly higher Constant Score (8.61 points, p < 0.00001), UCLA shoulder score (2.96 points, p < 0.0001) and ASES shoulder score (9.49 points, p < 0.0006). Patients with intact repairs also reported lower pain VAS Pain scores by 0.62 points (p < 0.0004).

CONCLUSIONS

Our results show better functional outcome and pain scores in patients with intact rotator cuffs at follow-up when compared to those that have re-torn. This difference is equivalent to the published Minimal Clinically Important Difference for the ASES but not Constant Scores. This review has also highlighted that shoulder strength in patients with intact cuff repairs is likely to be greater than in patients with a failed repair.

Does early motion lead to a higher failure rate or better outcomes after arthroscopic rotator cuff repair? A systematic review of overlapping meta-analyses

BACKGROUND

The aims of the study were as follows: to perform a systematic review of meta-analyses comparing "early motion" and "delayed motion" after arthroscopic rotator cuff repair; to provide a framework to analyze the best available evidence to develop recommendations; and to identify gaps where suggestions could be made for future investigations.

METHODS

Literature searches were performed to identify meta-analyses examining arthroscopic rotator cuff repair with early-motion vs. delayed-motion rehabilitation protocols. Clinical data were extracted, and meta-analysis quality was assessed using the Quality of Reporting of Meta-analyses and Oxman-Guyatt scales.

RESULTS

Nine meta-analyses met inclusion criteria. No clear superiority was noted in clinical outcome scores for early-motion or delayed-motion rehabilitation. Results of tendon healing were found to be either no different or in favor of delayed motion, but no differences were noted in rotator cuff tear recurrence rates postoperatively. The majority of meta-analyses found significantly better range of motion with early motion up to a year postoperatively for forward elevation and up to 6 months for external rotation, but significant differences were not reported for functional improvements and strength at 12 months postoperatively. Subgroup analyses suggested that larger preoperative tear sizes have significantly greater retear rates with early-motion rehabilitation.

CONCLUSIONS

The current highest level of evidence suggests that early-motion rehabilitation after rotator cuff repair results in superior postoperative range of motion up to 1 year. Whereas early motion and delayed motion after cuff repair may lead to comparable functional outcomes and retear rates, concern exists that early motion may result in greater retear rates, particularly with larger tear sizes.

2013 Neer Award: predictors of failure of nonoperative treatment of chronic, symptomatic, full-thickness rotator cuff tears

BACKGROUND

The purpose of this study is to help define the indications for rotator cuff repair by identifying predictors of failure of nonoperative treatment.

METHODS

A prospective, multicenter, cohort study design was used. All patients with full-thickness rotator cuff tears on magnetic resonance imaging were offered participation. Baseline data from this cohort were used to examine risk factors for failing a standard rehabilitation protocol. Patients who underwent surgery were defined as failing nonoperative treatment. A Cox proportional hazards model was fit to determinethe baseline factors that predicted failure. The dependent variable was time to surgery. The independent variables were tear severity and baseline patient factors: age, activity level, body mass index, sex, Single Assessment Numeric Evaluation score, visual analog scale score for pain, education, handedness, comorbidities, duration of symptoms, strength, employment, smoking status, and patient expectations.

RESULTS

Of the 433 subjects in this study, 87 underwent surgery with 93% follow-up at 1 year and 88% follow-up at 2 years. The median age was 62 years, and 49% were female patients. Multivariate modeling, adjusted for the covariates listed previously, identified patient expectations regarding physical therapy (P < .0001) as the strongest predictor of surgery. Higher activity level (P = .011) and not smoking (P = .023) were also significant predictors of surgery.

CONCLUSION

A patient's decision to undergo surgery is influenced more by low expectations regarding the effectiveness of physical therapy than by patient symptoms or anatomic features of the rotator cuff tear. As such, patient symptoms and anatomic features of the chronic rotator cuff tear may not be the best features to use when deciding on surgical intervention.

Does Early Versus Delayed Active Range of Motion Affect Rotator Cuff Healing After Surgical Repair? A Systematic Review and Meta-analysis

BACKGROUND

The timing of passive range of motion (ROM) after surgical repair of the rotator cuff (RC) has been shown to affect healing. However, it is unknown if early or delayed active ROM affects healing.

PURPOSE

To determine whether early versus delayed active ROM affects structural results of RC repair surgery.

STUDY DESIGN

Systematic review and meta-analysis.

METHODS

A systematic review of articles published between January 2004 and April 2014 was conducted. Structural results were compared for early (<6 weeks after surgery) versus delayed (≥6 weeks after surgery) active ROM using chi-square and Fisher exact tests, as well as relative risks (RRs) and 95% CIs. The analyses were stratified by tear size and repair method.

RESULTS

A total of 37 studies (2251 repairs) were included in the analysis, with 10 (649 repairs) in the early group and 27 (1602 repairs) in the delayed group. For tears ≤3 cm, the risk of a structural tendon defect was higher in the early versus delayed group for transosseous plus single-row suture anchor repairs (39.7% vs 24.3%; RR, 1.63 [95% CI, 1.28-2.08]). For tears >3 cm, the risk of a structural tendon defect was higher in the early versus delayed group for suture bridge repairs (48% vs 17.5%; RR, 2.74 [95% CI, 1.59-4.73]) and all repair methods combined (40.5% vs 26.7%; RR, 1.52 [95% CI, 1.17-1.97]). For tears >5 cm, the risk of structural tendon defect was higher in the early versus delayed group for suture bridge repairs (100% vs 16.7%; RR, 6.00 [95% CI, 1.69-21.26]). There were no statistically significant associations for tears measuring ≤1, 1-3, or 3-5 cm.

CONCLUSION

Early active ROM was associated with increased risk of a structural defect for small and large RC tears, and thus might not be advisable after RC repair.

I.S.Mu.L.T - Rotator Cuff Tears Guidelines

Despite the high level achieved in the field of shoulder surgery, a global consensus on rotator cuff tears management is lacking. This work is divided into two main sessions: in the first, we set questions about hot topics involved in the rotator cuff tears, from the etiopathogenesis to the surgical treatment. In the second, we answered these questions by mentioning Evidence Based Medicine. The aim of the present work is to provide easily accessible guidelines: they could be considered as recommendations for a good clinical practice developed through a process of systematic review of the literature and expert opinion, in order to improve the quality of care and rationalize the use of resources.

A comparison of conventional ultrasonography and arthrosonography in the assessment of cuff integrity after rotator cuff repair

Background

This study was designed to perform conventional ultrasonography, magnetic resonance arthrography (MRA) and arthrosonography exams after rotator cuff repair to compare the results of conventional ultrasonography and arthrosonography with those of MRA as the gold standard.

Methods

We prospectively studied 42 consecutive patients (14 males, 28 females; average age, 59.4 years) who received arthroscopic rotator cuff repair due to full-thickness tears of the supraspinatus tendon from 2008 to 2010. The integrity assessment of the repaired rotator cuff was performed 6 months postoperatively using conventional ultrasonography, MRA, and arthrosonography.

Results

The diagnostic accuracy of the conventional ultrasonography compared to MRA was 78.6% and the McNemar test results were 0.016 in full-thickness tear and 0.077 in partial-thickness tear. The diagnostic accuracy of arthrosonography compared to MRA was 92.9% and the McNemar test results were 0.998 in full-thickness tear and 0.875 in partial-thickness tear.

Conclusions

It was found that the integrity assessment of the repaired rotator cuff by ultrasonography must be guarded against and that arthrosonography is an effective alternative method in the postoperative integrity assessment. Also, an arthrosonography seems to be a suitable modality to replace the conventional ultrasonography.

Effectiveness of physical therapy in treating atraumatic full-thickness rotator cuff tears: a multicenter prospective cohort study

PURPOSE

To assess the effectiveness of a specific nonoperative physical therapy program in treating atraumatic full-thickness rotator cuff tears using a multicenter prospective cohort study design.

MATERIALS AND METHODS

Patients with atraumatic full-thickness rotator cuff tears who consented to enroll provided data via questionnaire on demographics, symptom characteristics, comorbidities, willingness to undergo surgery, and patient-related outcome assessments (Short Form 12 score, American Shoulder and Elbow Surgeons score, Western Ontario Rotator Cuff score, Single Assessment Numeric Evaluation score, and Shoulder Activity Scale). Physicians recorded physical examination and imaging data. Patients began a physical therapy program developed from a systematic review of the literature and returned for evaluation at 6 and 12 weeks. At those visits, patients could choose 1 of 3 courses: (1) cured (no formal follow-up scheduled), (2) improved (continue therapy with scheduled reassessment in 6 weeks), or (3) no better (surgery offered). Patients were contacted by telephone at 1 and 2 years to determine whether they had undergone surgery since their last visit. A Wilcoxon signed rank test with continuity correction was used to compare initial, 6-week, and 12-week outcome scores.

RESULTS

The cohort consists of 452 patients. Patient-reported outcomes improved significantly at 6 and 12 weeks. Patients elected to undergo surgery less than 25% of the time. Patients who decided to have surgery generally did so between 6 and 12 weeks, and few had surgery between 3 and 24 months.

CONCLUSION

Nonoperative treatment using this physical therapy protocol is effective for treating atraumatic full-thickness rotator cuff tears in approximately 75% of patients followed up for 2 years.

The modified massive cuff stitch: functional and structural outcome in massive cuff tears

Background

The massive cuff stitch (MCS) is known to be a strong suture, suitable for rotator cuff repair. We modified this technique for massive cuff tears by employing a horizontal medial mattress suture from an anchor as well as a vertically crossing transosseous suture.

Methods

We included 42 patients with massive cuff tears suitable for repair: 22 were treated with the modified MCS (MCS group), and 20 with a simple transosseous suture (STS group). The range of motion (ROM), muscle strength, visual analog scale, and the Japanese Orthopaedic Association (JOA) scores were evaluated pre-operatively and 12 and 24 months post-operatively. The incidence of post-operative re-tears was examined at least 1 year post-operatively using Sugaya's classification.

Results

The ROM, muscle strength, degree of pain, and the JOA scores were much improved after surgery in both groups, and there was no significant intergroup difference throughout the pre- and post-operative periods. In contrast, post-operative MRI revealed a significantly lower re-tear rate in the MCS group than in the STS group (9.1% vs. 40%, P = 0.0296).

Conclusions

The techniques tested were comparable in terms of functional outcome after surgical repair of massive cuff tears; however, the modified MCS repair technique produced superior structural outcomes with a significantly lower re-tear rate.

Single row rotator cuff repair with modified technique

Rotator cuff tear is a common medical condition. We introduce various suture methods that can be used for arthroscopic rotator cuff repair, review the single row rotator cuff repair method with modified technique, and introduce the Ulsan-University (UU) stich. We compare the UU stitch with the modified Mason-Allen (MA) suture method. The UU stitch configuration is a simple alternative to the modified MA suture configuration for rotator cuff repair.

Improved time-zero biomechanical properties using poly-L-lactic acid graft augmentation in a cadaveric rotator cuff repair model

HYPOTHESIS

Rotator cuff repair failure rates range from 20% to 90%, and failure is believed to occur most commonly by sutures cutting through the tendon due to excessive tension at the repair site. This study was designed to determine whether application of a woven poly-L-lactic acid device (X-Repair; Synthasome, San Diego, CA) would improve the mechanical properties of rotator cuff repair in vitro.

MATERIALS AND METHODS

Eight pairs of human cadaveric shoulders were used to test augmented and non-augmented rotator cuff repairs. Initial stiffness, yield load, ultimate load, and failure mode were compared.

RESULTS

Yield load was 56% to 92% higher and ultimate load was 56% to 76% higher in augmented repairs. No increase in initial stiffness was found. Failure by sutures cutting through the tendon was reduced, occurring in 17 of 20 non-augmented repairs but only 7 of 20 augmented repairs.

CONCLUSIONS

Our data show that application of the X-Repair device significantly increased the yield load and ultimate load of rotator cuff repairs in a human cadaveric model and altered the failure mode but did not affect initial repair stiffness.