Autograft Long Head Biceps Tendon Can Be Used as a Scaffold for Biologically Augmenting Rotator Cuff Repairs

Compression of an Autograft Biceps Into an Augmentation Patch Does Not Cause Mechanical Damage to the Tenocyte

PURPOSE

To evaluate the effects of this graft preparation technique on histologic evidence of tenocyte mechanical damage.

METHODS

A consecutive series of patients undergoing biceps tenodesis for shoulder pathology were evaluated. After suprapectoral tenodesis, 27 mm of the long head of the biceps was secured for compression into the patch. The remaining length of the residual tendon was longitudinally split, resulting in 2 equal lengths of remnant tendon from the same zone. One sample was sent to pathology with no preparation, and the other was prepared as a compressed biceps autograft patch according to the manufacturer's recommendations. Both grafts were sent to pathology for evaluation of tenocyte morphology. Records were reviewed to determine if compression resulted in mechanical damage to the tenocytes at the time of biceps augmentation.

RESULTS

Fifty-five shoulder procedures and 110 samples were sent for pathology analysis. Forty-two of the 55 (76%) specimens demonstrated morphologically normal tenocytes in both the compressed and noncompressed groups, and 7 (13%) cases showed evidence of tenocyte necrosis or mechanical damage in both groups. The difference in abnormal tenocyte morphology between the compressed and native groups was not statistically significant (P = .625).

CONCLUSIONS

Autograft biceps compression into a point-of-care patch did not result in mechanical damage to tenocyte morphology at the time of insertion for augmentation of rotator cuff pathology.

CLINICAL RELEVANCE

Free proximal biceps tendon compression can result in a patch that does not mechanically damage the tenocyte. The patch can be used as a biologic autograft to enhance shoulder rotator cuff repair, as well as subscapularis repair in the setting of shoulder arthroplasty.

Reinforcements and augmentations with the long head of the biceps tendon in shoulder surgery: a narrative review

The long head of the biceps tendon (LHBT) has recently emerged as a therapeutic option for various shoulder pathologies. Synthetic materials and allografts have not shown sufficient resistance or favorable outcomes to restore rotator cuff native tissue properties, leading to consideration of using LHBT as biological augmentation. LHBT mimics adjacent structures, such as the rotator cuff, is easily accessible during surgery, and is a good source of live autologous cells for regenerative augmentation in rotator cuff repair, as a superior capsular reconstruction in irreparable cuff tears, in subscapularis augmentation in shoulder replacement and as a stabilizer in anterior shoulder instability. This narrative review aims to collect, synthesize and critically evaluate the literature on the use of the LHBT and its current applications in the field of shoulder surgery, improving the understanding of the terminology and consolidating the concepts related to the various procedures in shoulder surgery.

BicepBrace biceps tendon augmentation improves outcomes one year following surgery

PURPOSE

This study emphasizes the clinical utility of our newly published "BicepBrace" technique by comparing its preliminary outcomes with standard treatment within the short term follow-up of 12 months following massive rotator cuff repair surgery.

METHODS

A retrospective chart review of all the rotator cuff repairs by E.H.A. over a two year span was completed under institutional review board approval. Inclusion criteria included all adult patients who received primary massive rotator cuff repair within the time frame of June 15, 2021 and June 15, 2023. Exclusion criteria included non-massive rotator cuff repair, revision surgery, or rotator cuff repairs that were paired with total shoulder arthroplasty. These massive rotator cuff repairs were then evaluated for clinical failure necessitating revision surgery within 12 months of original repair. Statistical analyses were performed using t tests and chi square tests.

RESULTS

In total, 102 rotator cuff repairs were identified within the study timeframe. In total, 24 of these cases met criteria to be labeled as massive tears. In total, 13 of these massive tears were treated by standard technique and 11 of them were treated with our BicepBrace biceps tendon transfer technique. In total, 4 of the patients in the standard technique group were deemed clinical failures necessitating revision surgery (failure rate of 30.8%). Only one of the BicepBrace patients were deemed clinical failures (failure rate of 9.1%).

CONCLUSION

In the setting of a massive rotator cuff tear, the BicepBrace technique-utilizing the long head of the biceps tendon for superior cuff augmentation-may enhance the survivability of the repair within one year of surgery. This relatively new approach offers a promising alternative to standard techniques, particularly for certain patient populations.

The Evolution of Arthroscopic Shoulder Surgery: Current Trends and Future Perspectives

Arthroscopic shoulder surgery has undergone significant advancements over the past decades, transitioning from a primarily diagnostic tool to a comprehensive therapeutic approach. Technological innovations and refined surgical techniques have expanded the indications for arthroscopy, allowing minimally invasive management of shoulder instability and rotator cuff pathology. Methods: This narrative review explores the historical evolution, current trends, and future perspectives in arthroscopic shoulder surgery. Results: Key advancements in shoulder instability management include the evolution of the arthroscopic Bankart repair, the introduction of the remplissage technique for Hill-Sachs lesions, and the development of arthroscopic Latarjet procedures. Additionally, novel techniques such as Dynamic Anterior Stabilization (DAS) and bone block procedures have emerged as promising solutions for complex instability cases. In rotator cuff repair, innovations such as the suture-bridge double-row technique, superior capsular reconstruction (SCR), and biological augmentation strategies, including dermal allografts and bioinductive patches, have contributed to improving tendon healing and functional outcomes. The role of biologic augmentation, including biceps tendon autografts and subacromial bursa augmentation, is also gaining traction in enhancing repair durability. Conclusions: As arthroscopic techniques continue to evolve, the integration of biologic solutions and patient-specific surgical planning will likely define the future of shoulder surgery. This review provides a comprehensive assessment of current state-of-the-art techniques and discusses their clinical implications, with a focus on optimizing patient outcomes and minimizing surgical failure rates.

Long Head of the Biceps Tendon Pediculated Autograft Augmentation of Subscapularis Repair During Total Shoulder Arthroplasty

Access to the glenohumeral joint during a deltopectoral approach to total shoulder arthroplasty (TSA) often requires some form of subscapularis (SSc) tendon detachment, which may lead to iatrogenic damage and insufficiency of a previously healthy structure. Despite optimization of SSc management techniques, the overall repair failure rate remains high. Although various biological and structural augmentation methods have been advocated to enhance healing of rotator cuff repairs, few options have yet been explored for SSc repair after TSA. In this Technical Note, we describe a method involving the long head of the biceps tendon as a pediculated autograft to reinforce the SSc repair after anatomic or reverse TSA. After long head of the biceps tendon tenodesis, its proximal part is released from the supraglenoid tubercle while remaining in its groove to be subsequently placed at the rotator interval and sutured either to the SSc, the supraspinatus, or the entire anterosuperior rotator cuff on an individual basis. Repurposing the otherwise-discarded tendon brings several mechanical and biological advantages for SSc repair healing at low cost and without donor-site morbidity.

Patch Augmentation in Arthroscopic Rotator Cuff Surgery-Review of Current Evidence and Newest Trends

Background: Rotator cuff tears are a common and debilitating condition requiring surgical intervention. Arthroscopic rotator cuff repair is essential for restoring shoulder function and alleviating pain. Tear classification by size and tendon retraction, along with the grade for fatty infiltration, influence postoperative outcomes, with large tears and higher fatty infiltration grades linked to higher retear rates. Managing complex tears is challenging, with failure rates ranging from 20 to 94%. Patch augmentation has emerged as a promising strategy, using biological or synthetic materials to reinforce tendon repairs, enhancing structural integrity and reducing retear risk. Methods: A review of the recent literature from January 2018 to March 2024 was conducted using PubMed/MEDLINE, Embase, and Web of Science. Keywords included "rotator cuff tear", "rotator cuff augmentation", "rotator cuff patch", "tendon augmentation", "massive rotator cuff tear", "patch augmentation", and "grafts". Relevant articles were selected based on their abstracts for a comprehensive review. Results: Initial methods used autograft tissues, but advances in biomaterials have led to standardized, biocompatible synthetic patches. Studies show reduced retear rates with patch augmentation, ranging from 17 to 45%. Conclusions: Patch augmentation reduces the retear rates and improves tendon repair, but complications like immune responses and infections persist. Cost-effectiveness analyses indicate that while initial costs are higher, long-term savings from reduced rehabilitation, revision surgeries, and increased productivity can make patch augmentation economically beneficial.

Partial-Thickness Rotator Cuff Tears: Current Concepts

» Partial-thickness rotator cuff tears (PTRCTs) are a common pathology with a likely high asymptomatic incidence rate, particularly in the overhead athlete.» The anatomy, 5-layer histology, and relationship to Ellman's classification of PTRCTs have been well studied, with recent interest in radiographic predictors such as the critical shoulder angle and acromial index.» Depending on the definition of tear progression, rates of PTRCT progression range from 4% to 44% and appear related to symptomatology and work/activity level.» Nearly all PTRCTs should be managed conservatively initially, particularly in overhead athletes, with those that fail nonoperative management undergoing arthroscopic debridement ± acromioplasty if <50% thickness or arthroscopic conversion repair or in situ repair if >50% thickness.» Augmentation of PTRCTs is promising, with leukocyte-poor platelet-rich plasma having the most robust body of supportive data. Mesenchymal signaling cell biologics and the variety of scaffold onlay augments require more rigorous studies before regular usage.

Arthroscopic Double-Row Rotator Cuff Repair With Biceps Augmentation

Arthroscopic repair of chronic retracted rotator cuff tears remains challenging to shoulder arthroscopy surgeons. With the recent technical advances, most of the massive rotator cuff tears are managed successfully. The biceps tendon is highly vascular and a rich source of tenocytes and fibroblasts, which can promote biological healing. In massive degenerate rotator cuff tears in which the rotator cuff tissue can be released and fixed onto the footprint without much tissue tension, long head of the biceps tendon can act as an augment providing structural support to the poor-quality rotator cuff tissue and also enhancing the healing process. In this Technical Note, we describe arthroscopic rotator cuff repair using biceps augmentation for a massive degenerate rotator cuff tear with the excursion of the cuff onto the footprint with minimal tissue tension.

Editorial Commentary: Shoulder Long Head of the Biceps Tendon Transposition Without Tenotomy May Be a Beneficial Augment for Massive Rotator Cuff Tear Repair

Although many surgeons discard the long head of the biceps (LHB) tendon during arthroscopic rotator cuff repairs, several authors have argued that the LHB tendon may serve as a biologic and structural augment for massive repairs. There are multiple benefits of incorporating the LHB tendon autograft in difficult-to-repair massive rotator cuff tears. First, by maintaining the glenoid origin, the tendon likely retains a significant native blood supply, as well as tenocytes, which may support the healing process. In addition, there are several biomechanical benefits. The LHB may act as a dynamic humeral head depressor since it is still attached to the muscular unit distally. The tendon could also serve as a convergence post, while proving robust tissue for the repair. Also, the LHB tendon may decrease undue tension on the repair, bringing us closer to a tension-free repair. Finally, this may be a cost-conscious technique. One concern, requiring additional investigation, is that some surgeons believe the LHB may be a pain generator in patients with rotator cuff tears. One surgeon's trash is another surgeon's treasure.

Rotator Cuff Augmentation: Its Role and Best Practices

Rotator cuff tears are a common source of pain and impairment in the shoulder. Healing of the rotator cuff tendons following repair has been associated with improved patient outcomes. While there have been many technical improvements in surgical techniques for rotator cuff repair, failure rates are still surprisingly high. Augmentation of these repairs has been shown to help with fixation biomechanics as well as healing rates. The described types of augments include autograft, allograft, xenograft, and synthetic options. This report reviews the commonly available types of augments and some of the outcomes associated with their use.

The long head of the biceps tendon: a valuable tool in shoulder surgery

ANATOMY AND FUNCTION

The long head of the biceps tendon (LHBT) has different properties and characteristics that render it a valuable tool in the hands of shoulder surgeons. Its accessibility, biomechanical strength, regenerative capabilities, and biocompatibility allow it to be a valuable autologous graft for repairing and augmenting ligamentous and muscular structures in the glenohumeral joint.

SHOULDER SURGERY APPLICATIONS

Numerous applications of the LHBT have been described in the shoulder surgery literature, including augmentation of posterior-superior rotator cuff repair, augmentation of subscapularis peel repair, dynamic anterior stabilization, anterior capsule reconstruction, post-stroke stabilization, and superior capsular reconstruction. Some of these applications have been described meticulously in technical notes and case reports, whereas others may require additional research to confirm clinical benefit and efficacy.

CONCLUSION

This review examines the role of the LHBT as a source of local autograft, with biological and biomechanical properties, in aiding outcomes of complex primary and revision shoulder surgery procedures.

Long Head of the Biceps Pediculated Autograft Augmentation of Arthroscopic Subscapularis Repair

Subscapularis (SSc) repairs are not free of failure and continues to pose a challenging problem. Although various biological and structural augmentation methods are available for the posterosuperior rotator cuff, few options have been explored for the anterior one. In the Technical Note, we describe an all-arthroscopic technique in which we use the long head of the biceps tendon (LHBT) as a pediculated autograft to reinforce an SSc repair. After SSc repair and LHBT tenodesis, the intra-articular portion of the LHBT is placed on the upper part of the SSc tendon at the rotator interval. Repurposing the otherwise-discarded tendon brings several biological and mechanical advantages at a lower cost without donor-site morbidity.

Partial Articular Supraspinatus Tendon Avulsion Repair and Patch: A Technical Note for Augmenting the Supraspinatus Reinsertion with the Long Head of the Biceps Tendon

BACKGROUND

There is no clear consensus on the treatment of partial articular-sided supraspinatus tendon avulsions. Debridement alone might not be sufficient to prevent further tendon degradation or alleviate patient complaints. Direct repair using a suture anchor without treating the concomitant conditions of the long head of the biceps tendon might come with residual anterior shoulder pain or even further loss of function in cases of failed repair. The purpose of the present study is to describe an arthroscopic technique by which the long head of the biceps tendon can be included in the partial articular-sided supraspinatus tendon avulsion repair.

TECHNIQUE PRESENTATION WITH VIDEO

In this technical note we describe the arthroscopic repair and augmentation with tenotomized biceps of partial supraspinatus tendon tears to address three main concepts for successful rotator cuff repairs, namely rotator cuff biologic augmentation, tendon to bone healing and postoperative pain prevention.

CONCLUSION

The biceps tendon is a mechanically robust, locally available autograft that can be used in borderline partial articular-sided supraspinatus tendon avulsions in order to biologically augment healing at the tendon-bone interface without any immunogenic reactions or morbidity following harvesting.

Rotator Cuff Repair with Knotless All-Suture Medial Row Anchors and Biceps Autograft Augmentation

Incomplete healing and/or functional failure following rotator cuff tear repair remains a challenging problem for both patients and surgeons. Augmentation strategies are growing to increase healing through biologic and mechanical mechanisms to improve functional results after arthroscopic rotator cuff repair. The majority of currently described augmentation techniques use allograft tissue. An alternative, low-cost, autograft option for augmentation is the use of the long head of biceps tendon autograft as a free functional graft. Here, we describe the use of autograft biceps tendon as a viable option for augmentation of double-row rotator cuff repair with knotless all-suture suture anchors.

Biceps Smash Technique: Biceps Tendon Autograft Augmentation for Arthroscopic Rotator Cuff Reconstruction

The proportion of postoperative retears after arthroscopic rotator cuff reconstruction remains constant despite advancement of suture techniques and improved anchor implants. The commonly degenerative nature of rotator cuff tears can carry the risk of compromised tissue. Several techniques have been developed to biologically enhance rotator cuff repair, and a considerable number of autologous, allogeneic, and xenogenous augmentation methods have been described. This article introduces the biceps smash technique, an arthroscopic augmentation procedure for posterosuperior rotator cuff reconstruction using an autograft patch of the long head of the biceps tendon.

Current Understanding and New Advances in the Surgical Management of Reparable Rotator Cuff Tears: A Scoping Review

Rotator cuff (RC) tears are among the most common musculoskeletal disorders and can be associated with pain, weakness, and shoulder dysfunction. In recent years, there have been significant advances with regard to the understanding of rotator cuff disease and its management. With technological improvements and advanced diagnostic modalities, there has been much progress as to improved understanding of the pathology. Similarly, with advanced implant designs and instrumentation, operative techniques have evolved. Furthermore, refinements in postoperative rehabilitation protocols have improved patient outcomes. In this scoping review, we aim to provide an overview of the current knowledge on the treatment of rotator cuff disorders and to highlight recent advances in its management.

Biomechanical evaluation of subscapularis peel repairs augmented with the long head of the biceps tendon for anatomic total shoulder arthroplasty

BACKGROUND

Subscapularis failure is a troublesome complication following anatomic total shoulder arthroplasty (aTSA). Commonly discarded during aTSA, the long head of the biceps tendon (LHBT) may offer an efficient and cheap autograft for the augmentation of the subscapularis repair during aTSA. The purpose of this study was to biomechanically compare a standard subscapularis peel repair to 2 methods of subscapularis peel repair augmented with LHBT.

METHODS

18 human cadaveric shoulders (61 ± 9 years of age) were used in this study. Shoulders were randomly assigned to biomechanically compare subscapularis peel repair with (1) traditional single-row repair, (2) single row with horizontal LHBT augmentation, or (3) single row with V-shaped LHBT augmentation. Shoulders underwent biomechanical testing on a servohydraulic testing system to compare cyclic displacement, load to failure, and stiffness.

RESULTS

There were no significant differences in the cyclic displacement between the 3 techniques in the superior, middle, or inferior portion of the subscapularis repair (P > .05). The horizontal (436.7 ± 113.3 N; P = .011) and V-shape (563.3 ± 101.0 N; P < .001) repair demonstrated significantly greater load to failure compared with traditional repair (344.4 ± 82.4 N). The V-shape repair had significantly greater load to failure compared to the horizontal repair (P < .001). The horizontal (61.6 ± 8.4 N/mm; P < .001) and the V-shape (62.8 ± 6.1; P < .001) repairs demonstrated significantly greater stiffness compared to the traditional repair (47.6 ± 6.2 N). There was no significant difference in the stiffness of the horizontal and V-shape repairs (P = .770).

CONCLUSIONS

Subscapularis peel repair augmentation with LHBT autograft following aTSA confers greater time zero load to failure and stiffness when compared to a standard subscapularis peel repair.

Treatment options for massive irreparable rotator cuff tears: a review of arthroscopic surgical options

While functional reconstruction of massive irreparable rotator cuff tears remains a challenge, current techniques aimed at recentering and preventing superior migration of the humeral head allow for clinical and biomechanical improvements in shoulder pain and function. Recentering of the glenohumeral joint reduces the moment arm and helps the deltoid to recruit more fibers, which compensates for insufficient rotator cuff function and reduces joint pressure. In the past, the concept of a superior capsular reconstruction with a patch secured by suture anchors has been used. However, several innovative arthroscopic treatment options have also been developed. The purpose of this article is to present an overview of new strategies and surgical techniques and if existing present initial clinical results. Techniques that will be covered include rerouting the long head of the biceps tendon, utilization of the biceps tendon as an autograft to reconstruct the superior capsule, utilization of a semitendinosus tendon allograft to reconstruct the superior capsule, superior capsular reconstruction with dermal allografts, and subacromial spacers.

Aktuelle Aspekte der Behandlung der Rotatorenmanschette

Rotatorenmanschettenrupturen gehören zu den häufigsten muskuloskeletalen Erkrankungen und können mit ausgeprägten Schmerzen und Funktionseinschränkungen einhergehen. Für ihre Entstehung ist eine Vielzahl von Faktoren relevant, u. a. die individuelle Anatomie des Akromions. Mit Hilfe der heutigen technischen Möglichkeiten wurde nun festgestellt, dass zusätzlich zu seiner lateralen Ausdehnung auch die sagittale Ausdehnung des Akromions eine Rolle zu spielen scheint. Die bildgebende Darstellung der Rotatorenmanschette (RM) hat von den technischen Fortschritten der letzten Jahrzehnte ebenfalls profitiert. Magnetresonanztomographie (MRT) und MR-Arthrographie werden heute flächendeckend eingesetzt. Letztere bietet die höchste Sensitivität für die Entdeckung selbst kleiner Partialläsionen. Neue Sequenzen und Nachbearbeitungsmöglichkeiten können als hilfreiche tools für die operative Planung eingesetzt werden. Grundsätzlich richtet sich die Behandlung der RM neben der Symptomatik nach der Rupturgenese und -morphologie sowie der erwarteten Gewebequalität des Muskel-Sehnen-Kontinuums. Auch das Gesamtprofil, die Erwartungshaltung und die Rehabilitationsmöglichkeiten des Patienten sind wichtig. Die heutigen operativen Techniken werden durch spannende Entwicklungen der Industrie mitbestimmt, die in den letzten Jahren immer bessere Fadenankersysteme, aber auch Augmentationsmaterialien auf den Markt gebracht hat. Letztere zielen nicht nur auf die mechanische Verstärkung der Sehnenrekonstruktion, sondern auch auf die Optimierung der biologischen Eigenschaften des Konstrukts ab. Hinsichtlich Fixation konnte die biomechanische Forschung zeigen, dass zweireihige oder Suture-Bridge-Fixationen einreihigen oder transossären Fixationen überlegen sind. Diese Überlegenheit im Labor spiegelt sich noch nicht klar in den klinischen Ergebnissen wider, dennoch sind die meisten Chirurgen heute auf diese Technik übergegangen. Was die postoperative Nachbehandlung angeht, stellen jüngste randomisiert-kontrollierte Untersuchungen das Konzept der postoperativen Immobilisation in Abduktion in Frage. Hier scheint das letzte Wort noch nicht gesprochen zu sein.

Compressed autograft biceps tendon augmentation of subscapularis repair following shoulder arthroplasty

Subscapularis integrity is correlated with function following shoulder arthroplasty. Failure of healing, particularly following anatomic total shoulder arthroplasty, is associated with poor outcomes and the need for revision. Graft augmentation has been used to increase healing following rotator cuff repair but has not been commonly advocated for augmenting the subscapularis following shoulder arthroplasty. The long head biceps tendon is typically tenodesed and discarded during shoulder arthroplasty. Rather than discarding the tendon, the tendon may be compressed and applied to the subscapularis as a biologic scaffold to potentially improve subscapularis healing following shoulder arthroplasty.

Compressed Biceps Autograft Augmentation of Arthroscopic Rotator Cuff Repair

Rotator cuff repair failure rates continue to be a challenging problem. Various methods of biological and structural augmentation of the rotator cuff have been explored to improve tendon healing after repair. We describe a technique in which biceps tendon autograft is harvested after tenodesis. The biceps tendon is then compressed into a patch that is placed over the repaired rotator cuff tendon. Repurposing the portion of the tendon that is otherwise discarded offers several advantages over other augmentations that have been used, including the biological potential of live autograft tenocytes in the patch, lower cost, and no donor-site morbidity.

Editorial Commentary: Rotator Cuff Repairs Fail at an Alarmingly High Rate During Long-Term Follow-Up: Graft Augmentation and Biologics May Improve Future Outcomes

Rotator cuff repairs (RCR) frequently fail to heal, particularly those with advanced fatty infiltration, supraspinatus and infraspinatus atrophy, narrowed acromiohumeral distance, and large-to-massive tear size. Unfortunately, the longer the follow up, the more sobering the statistics, with some reported retear rates ranging up to 94%. Importantly, recent long-term radiographic assessments after primary RCR reveal direct correlations between failure and patient-reported outcomes, functional deterioration, and ultimately, progression of glenohumeral arthritis and/or frank cuff tear arthropathy. As shoulder surgeons, we must continue to seek out novel approaches to improve tendon to bone healing and recapitulate the native rotator cuff enthesis. In doing so, we hope to engender more sustained subjective and objective results for our patients over time. Investigations are ongoing into several biomechanical and biological or structural adjuncts, from platelet-rich plasma and bone marrow aspirate concentrate to autograft or allograft structural augments. We must continue to push the envelope and refuse to settle for the current reality and alarmingly high failure rates following RCR.

Relationship between the Hamada Grade and underlying pathological conditions in the rotator cuff and long head of biceps in symptomatic patients with rotator cuff tears

Background

This study aimed to investigate the relationship between Hamada Grade and rotator cuff and long head of the biceps (LHB) pathologies in symptomatic patients with rotator cuff tears (RCTs).

Methods

We retrospectively reviewed 376 patients (156 men and 220 women; mean age, 68.4 years) who had undergone surgery for complete RCTs. Preoperative plain radiography, magnetic resonance imaging, and intraoperative findings were assessed. All cases were allocated to the Hamada Grade 1, 2, 3, and 4-5 groups to investigate the correlation between Hamada Grade severity and underlying rotator cuff and LHB pathologies.

Results

The rate of RCTs involving the infraspinatus was significantly higher in Grade 2 than in Grade 1 (P < .0001). The tear size and fatty muscle degeneration of the subscapularis in Hamada Grade 3 were significantly more severe than those in Grade 2 (P = .01 and P < .0001, respectively). The tear size and fatty muscle degeneration of the rotator cuff in Grade 4-5 were significantly more severe than those in Grade 3 (all P < .05). The complete LHB rupture rate was significantly higher in Hamada Grade 4-5 than in Grades 1, 2, and 3 (all P < .001).

Conclusion

Rotator cuff tears involving the infraspinatus were associated with Hamada Grade 2. The rate of concomitant subscapularis tears with posterosuperior RCTs was significantly higher in Hamada Grade 3 than in Hamada Grade 2. RCT enlargement, progression of fatty muscle degeneration of the subscapularis and posterosuperior rotator cuff muscles, and the increase in complete LHB rupture were associated with Hamada Grade 4-5.

Editorial Commentary: Shoulder Superior Capsule Reconstruction Leads to Good Outcomes Despite Ambiguous Graft Healing Suggesting a Spacer Effect

Massive, retracted rotator cuff tears with poor tissue quality continue to pose a problem for the shoulder surgeon. Augmentation of such repairs with grafts, patches, spacers, or biologics is being closely investigated to help improve clinical outcomes and healing rates. Specifically, superior capsule reconstruction augmentation of such rotator cuff tears may lead to good outcomes. However, we do not truly understand how much native cuff tissue or graft healing is actually taking place. Clinically, superior capsule reconstruction augmentation of rotator cuff repair may simply be serving as a spacer.

Editorial Commentary: Long Head Biceps Tendon Can Be Used Like a Split Skin Graft: Mesh It and Augment Rotator Cuff Repairs

Full-thickness tears of the rotator cuff are common, and surgical treatment is indicated in most cases. Arthroscopic repair has become the standard technique, but despite improved surgical techniques, instrumentations, and implants, failure rates continue to be high and can reach 40% and more. Augmented repairs with allograft patches or autograft tissue, such as long head biceps tendon or fascia lata, have been used with mixed results. However, autograft augmentation seems to be resulting in superior outcomes and higher healing rates. Treating skin defects with split-skin grafts is the gold standard in burns and soft-tissue surgery. Given the limited supply of autograft, meshing autograft tendon and using it similar to a split-skin graft is a novel idea. When using a 2:1 expansion ratio, the long head biceps tendon can be formed into a porous scaffold with the in situ tenocytes, producing cytokines and promoting tenogenic differentiation. However, the scaffolds exhibited reduced tensile properties. The results are encouraging, and it will be interesting whether the clinical trials will demonstrate higher healing rates and better functional outcomes when compared to primary repair and allograft patch augmentation.