Neural network methodology for real-time modelling of bio-heat transfer during thermo-therapeutic applications

Influence of temperature-dependent acoustic and thermal parameters and nonlinear harmonics on the prediction of thermal lesion under HIFU ablation

According to the traditional method of high intensity focused ultrasound (HIFU) treatment, the acoustic and thermal characteristic parameters of constant temperature (room temperature or body temperature) are used to predict thermal lesion. Based on the nonlinear spherical beam equation (SBE) and Pennes bio-heat transfer equation, and a new acoustic-thermal coupled model is proposed. The constant and temperature-dependent acoustic and thermal characteristic parameters are used to predict thermal lesion, and the predicted lesion area are compared with each other. Moreover, the relationship between harmonic amplitude ratio (P₂/P₁) and thermal lesion is studied. Combined with the known experimental data of acoustic and thermal characteristic parameters of biological tissue and data fitting method, the relationship between acoustic and thermal characteristic parameters and temperature is obtained; and the thermal lesion simulation calculation is carried out by using the acoustic and thermal characteristic parameters under constant temperature and temperature- dependent acoustic and thermal characteristic parameters, respectively. The simulation results show that under the same irradiation condition, the thermal lesion predicted by temperature-dependent acoustic and thermal characteristic parameters is larger than that predicted by traditional method, and the thermal lesion increases with the decrease of harmonic amplitude ratio.

Towards real-time finite-strain anisotropic thermo-visco-elastodynamic analysis of soft tissues for thermal ablative therapy

BACKGROUND AND OBJECTIVES

Accurate and efficient prediction of soft tissue temperatures is essential to computer-assisted treatment systems for thermal ablation. It can be used to predict tissue temperatures and ablation volumes for personalised treatment planning and image-guided intervention. Numerically, it requires full nonlinear modelling of the coupled computational bioheat transfer and biomechanics, and efficient solution procedures; however, existing studies considered the bioheat analysis alone or the coupled linear analysis, without the fully coupled nonlinear analysis.

METHODS

We present a coupled thermo-visco-hyperelastic finite element algorithm, based on finite-strain thermoelasticity and total Lagrangian explicit dynamics. It considers the coupled nonlinear analysis of (i) bioheat transfer under soft tissue deformations and (ii) soft tissue deformations due to thermal expansion/shrinkage. The presented method accounts for anisotropic, finite-strain, temperature-dependent, thermal, and viscoelastic behaviours of soft tissues, and it is implemented using GPU acceleration for real-time computation.

RESULTS

The presented method can achieve thermo-visco-elastodynamic analysis of anisotropic soft tissues undergoing large deformations with high computational speeds in tetrahedral and hexahedral finite element meshes for surgical simulation of thermal ablation. We also demonstrate the translational benefits of the presented method for clinical applications using a simulation of thermal ablation in the liver.

CONCLUSION

The key advantage of the presented method is that it enables full nonlinear modelling of the anisotropic, finite-strain, temperature-dependent, thermal, and viscoelastic behaviours of soft tissues, instead of linear elastic, linear viscoelastic, and thermal-only modelling in the existing methods. It also provides high computational speeds for computer-assisted treatment systems towards enabling the operator to simulate thermal ablation accurately and visualise tissue temperatures and ablation zones immediately.

Domain Heterogeneity in Radiofrequency Therapies for Pain Relief: A Computational Study with Coupled Models

The objective of the current research work is to study the differences between the predicted ablation volume in homogeneous and heterogeneous models of typical radiofrequency (RF) procedures for pain relief. A three-dimensional computational domain comprising of the realistic anatomy of the target tissue was considered in the present study. A comparative analysis was conducted for three different scenarios: (a) a completely homogeneous domain comprising of only muscle tissue, (b) a heterogeneous domain comprising of nerve and muscle tissues, and (c) a heterogeneous domain comprising of bone, nerve and muscle tissues. Finite-element-based simulations were performed to compute the temperature and electrical field distribution during conventional RF procedures for treating pain, and exemplified here for the continuous case. The predicted results reveal that the consideration of heterogeneity within the computational domain results in distorted electric field distribution and leads to a significant reduction in the attained ablation volume during the continuous RF application for pain relief. The findings of this study could provide first-hand quantitative information to clinical practitioners about the impact of such heterogeneities on the efficacy of RF procedures, thereby assisting them in developing standardized optimal protocols for different cases of interest.

Thermal ablation of biological tissues in disease treatment: A review of computational models and future directions

Percutaneous thermal ablation has proven to be an effective modality for treating both benign and malignant tumours in various tissues. Among these modalities, radiofrequency ablation (RFA) is the most promising and widely adopted approach that has been extensively studied in the past decades. Microwave ablation (MWA) is a newly emerging modality that is gaining rapid momentum due to its capability of inducing rapid heating and attaining larger ablation volumes, and its lesser susceptibility to the heat sink effects as compared to RFA. Although the goal of both these therapies is to attain cell death in the target tissue by virtue of heating above 50°C, their underlying mechanism of action and principles greatly differs. Computational modelling is a powerful tool for studying the effect of electromagnetic interactions within the biological tissues and predicting the treatment outcomes during thermal ablative therapies. Such a priori estimation can assist the clinical practitioners during treatment planning with the goal of attaining successful tumour destruction and preservation of the surrounding healthy tissue and critical structures. This review provides current state-of-the-art developments and associated challenges in the computational modelling of thermal ablative techniques, viz., RFA and MWA, as well as touch upon several promising avenues in the modelling of laser ablation, nanoparticles assisted magnetic hyperthermia and non-invasive RFA. The application of RFA in pain relief has been extensively reviewed from modelling point of view. Additionally, future directions have also been provided to improve these models for their successful translation and integration into the hospital work flow.

Fast computation of soft tissue thermal response under deformation based on fast explicit dynamics finite element algorithm for surgical simulation

BACKGROUND AND OBJECTIVES

During thermal heating surgical procedures such as electrosurgery, thermal ablative treatment and hyperthermia, soft tissue deformation due to surgical tool-tissue interaction and patient movement can affect the distribution of thermal energy induced. Soft tissue temperature must be obtained from the deformed tissue for precise delivery of thermal energy. However, the classical Pennes bio-heat transfer model can handle only the static non-moving state of tissue. In addition, in order to enable a surgeon to visualise the simulated results immediately, the solution procedure must be suitable for real-time thermal applications.

METHODS

This paper presents a formulation of bio-heat transfer under the effect of soft tissue deformation for fast or near real-time tissue temperature prediction, based on fast explicit dynamics finite element algorithm (FED-FEM) for transient heat transfer. The proposed thermal analysis under deformation is achieved by transformation of the unknown deformed tissue state to the known initial static state via a mapping function. The appropriateness and effectiveness of the proposed formulation are evaluated on a realistic virtual human liver model with blood vessels to demonstrate a clinically relevant scenario of thermal ablation of hepatic cancer.

RESULTS

For numerical accuracy, the proposed formulation can achieve a typical 10^-3 level of normalised relative error at nodes and between 10^-4 and 10^-5 level of total errors for the simulation, by comparing solutions against the commercial finite element analysis package. For computation time, the proposed formulation under tissue deformation with anisotropic temperature-dependent properties consumes 2.518 × 10^-4 ms for one element thermal loads computation, compared to 2.237 × 10^-4 ms for the formulation without deformation which is 0.89 times of the former. Comparisons with three other formulations for isotropic and temperature-independent properties are also presented.

CONCLUSIONS

Compared to conventional methods focusing on numerical accuracy, convergence and stability, the proposed formulation focuses on computational performance for fast tissue thermal analysis. Compared to the classical Pennes model that handles only the static state of tissue, the proposed formulation can achieve fast thermal analysis on deformed states of tissue and can be applied in addition to tissue deformable models for non-linear heating analysis at even large deformation of soft tissue, leading to great translational potential in dynamic tissue temperature analysis and thermal dosimetry computation for computer-integrated medical education and personalised treatment.