Proline-15 creates an amphipathic wedge in maculatin 1.1 peptides that drives lipid membrane disruption

Proline-Modified (RW)n Peptides: Enhancing the Antimicrobial Efficacy and Selectivity against Multidrug-Resistant Pathogens

The growing threat of multidrug-resistant (MDR) bacteria necessitates the development of novel antimicrobial agents. This study investigates the potential of proline-modified (RW)n peptides as a platform for combating MDR pathogens with minimal toxicity. We synthesized and evaluated (RW)n peptides (n = 4, 6, and 8) with and without central proline residues against five clinically relevant bacterial strains, including ESKAPE pathogens. Antimicrobial activity, cytotoxicity, and synergistic effects with conventional antibiotics were assessed. Proline incorporation significantly enhanced the peptide selectivity and broadened the spectrum of activity, particularly against Gram-negative bacteria. RW6P and RW8P demonstrated exceptional efficacy (MICs ≤ 0.25 μg/mL) against methicillin-resistant Staphylococcus aureus and Escherichia coli with minimal toxicity to human cells. Notably, RW8P restored ampicillin susceptibility in Pseudomonas aeruginosa (MIC < 0.25 μg/mL) without dose-dependent toxicity. Exceptionally, RW6-2P demonstrated efficacy against all Gram-positive and Gram-negative bacteria, except Klebsiella pneumoniae (Kp), without toxicity. Furthermore, several Gram-negative isolates were rendered susceptible to vancomycin when combined with these peptides, addressing a key limitation of glycopeptide antibiotics. Gram-negative Klebsiella pneumoniae (Kp) was rendered susceptible to vancomycin when combined with RW4P and RW6-2P. RW4P and RW6-2P, with and without antibiotics, have shown selectivity. This study presents proline-modified (RW)n peptides as promising candidates for developing broad-spectrum antimicrobials with enhanced selectivity and the potential to revitalize existing antibiotics against MDR pathogens.

Bacterial flotillins as destabilizers of phospholipid membranes

From archaea to mammals evolutionary conserved flotillins are scaffolding proteins, recognized for their nandomain-segregating activity. Flotillins form basket-like oligomeric architectures on the membrane, based on a conserved secondary structure composition of the monomeric subunits: a membrane-targeting region, an SPFH domain and a coiled-coil "flotillin" domain. In B. subtilis, the two flotillins FloT and FloA are present, localizing mainly in distinct nanodomains and executing multiple cellular functions. We here use deuterium and phosphorus solid-state NMR to monitor the effect of the different flotillins FloT and FloA and their structural components on model membranes. We find a clear disordering effect of FloT and FloA on the membranes reaching the carbon positions in the centre of the membrane. This effect is imposed by the hydrophobic region and the adjacent SPFH domain and, surprisingly, further supported by the membrane-distant flotillin domain. Biological implications of this disordering action are discussed.

Important structural features of antimicrobial peptides towards specific activity: Trends in the development of efficient therapeutics

Proteins and peptides, as polypeptide chains, have usually got unique conformational structures for effective biological activity. Antimicrobial peptides (AMPs) are a group of bioactive peptides, which have been increasingly studied during recent years for their promising antibacterial, antifungal, antiviral and anti-inflammatory activity, as well as, other esteemed bioactivities. Numerous AMPs have been separated from a wide range of natural resources, or produced in vitro through chemical synthesis and recombinant protein expression. Natural AMPs have had limited clinical application due to several drawbacks, such as their short half-life due to protease degradation, lack of activity at physiological salt concentrations, toxicity to mammalian cells, and the absence of suitable methods of delivery for the AMPs that are targeted and sustained. The creation of synthetic analogs of AMPs would both avoid the drawbacks of the natural analogs and maintain or even increase the antimicrobial effectiveness. The structure-activity relationship of discovered AMPs or their derivatives facilitates the development of synthetic AMPs. This review discovered that the relationship between the activity of AMPs and their positive net charge, hydrophobicity, and amino acid sequence and the relationship between AMPs' function and other features like their topology, glycosylation, and halogenation.

The membrane activity of the antimicrobial peptide caerin 1.1 is pH dependent

Antimicrobial peptides are an important class of membrane-active peptides that can provide alternatives or complements to classic antibiotics. Among the many classes of AMPs, the histidine-rich family is of particular interest since they may induce pH-sensitive interactions with cell membranes. The AMP caerin 1.1 (Cae-1), from Australian tree frogs, has three histidine residues, and thus we studied the pH dependence of its interactions with model cell membranes. Using NMR spectroscopy and molecular dynamics simulations, we showed that Cae-1 induced greater perturbation of the lipid dynamics and water penetrations within the membrane interior in an acidic environment compared with physiological conditions. Using 31P solid-state NMR, the packing, chemical environment, and dynamics of the lipid headgroup were monitored. 2H solid-state NMR showed that Cae-1 ordered the acyl chains of the hydrophobic core of the bilayer. These results supported the molecular dynamics data, which showed that Cae-1 was mainly inserted within the lipid bilayer for both neutral and negatively charged membranes, with the charged residues pulling the water and phosphate groups inward. This could be an early step in the mechanism of membrane disruption by histidine-rich antimicrobial peptides and indicated that Cae-1 acts via a transmembrane mechanism in bilayers of neutral and anionic phospholipid membranes, especially in acidic conditions.

A Novel Strategy for the Design of Aurein 1.2 Analogs with Enhanced Bioactivities by Conjunction of Cell-Penetrating Regions

The rational design modification of membrane-active peptide structures by introducing additional membrane-penetrating regions has become a good strategy for the improvement of action and potency. Aurein 1.2 (GLFDIIKKIAESF-NH2) is a multifunctional antimicrobial peptide isolated from the green and golden bell frog, Litoria aurea, and the southern bell frog Litoria raniformis skin secretions. Its bio-functionality has been widely investigated. However, its lack of a potent action failed to provide aurein 1.2 with a competitive edge for further development as a therapeutic agent for clinical use. Herein, aurein 1.2 was chosen as a template for rational modification to achieve a more potent bio-functionality. KLA-2 (GLFDIIKKLAKLAESF-NH2), which a double KLA region inserted into the sequence, presented a 2-16-fold enhancement of antimicrobial activity, a 2-8-fold greater anti-biofilm activity (including biofilm prevention and eradication), and a 7-fold more potent anti-proliferation activity and hence was regarded as the most broad-spectrum active peptide. Additionally, with respect to antimicrobial activity, the IIKK-modified analog, IK-3 (GLFDIIKKIIKKIIKKI-NH2), also demonstrated a potent enhancement of activity against various pathogens, exhibiting a 2-8-fold enhanced activity compared to the parent peptide. Moreover, the selectivities of KLA-1 and KLA-2 were enhanced significantly. In conclusion, peptide modification, through the introduction of additional membrane penetrating regions, can increase both the potency and activity spectra of natural template peptides, making them suitable candidates for new drug development.

Applications and evolution of melittin, the quintessential membrane active peptide

Melittin, the main venom component of the European Honeybee, is a cationic linear peptide-amide of 26 amino acid residues with the sequence: GIGAVLKVLTTGLPALISWIKRKRQQ-NH₂. Melittin binds to lipid bilayer membranes, folds into amphipathic α-helical secondary structure and disrupts the permeability barrier. Since melittin was first described, a remarkable array of activities and potential applications in biology and medicine have been described. Melittin is also a favorite model system for biophysicists to study the structure, folding and function of peptides and proteins in membranes. Melittin has also been used as a template for the evolution of new activities in membranes. Here we overview the rich history of scientific research into the many activities of melittin and outline exciting future applications.

Tuning of a Membrane-Perforating Antimicrobial Peptide to Selectively Target Membranes of Different Lipid Composition

The use of designed antimicrobial peptides as drugs has been impeded by the absence of simple sequence-structure-function relationships and design rules. The likely cause is that many of these peptides permeabilize membranes via highly disordered, heterogeneous mechanisms, forming aggregates without well-defined tertiary or secondary structure. We suggest that the combination of high-throughput library screening with atomistic computer simulations can successfully address this challenge by tuning a previously developed general pore-forming peptide into a selective pore-former for different lipid types. A library of 2916 peptides was designed based on the LDKA template. The library peptides were synthesized and screened using a high-throughput orthogonal vesicle leakage assay. Dyes of different sizes were entrapped inside vesicles with varying lipid composition to simultaneously screen for both pore size and affinity for negatively charged and neutral lipid membranes. From this screen, nine different LDKA variants that have unique activity were selected, sequenced, synthesized, and characterized. Despite the minor sequence changes, each of these peptides has unique functional properties, forming either small or large pores and being selective for either neutral or anionic lipid bilayers. Long-scale, unbiased atomistic molecular dynamics (MD) simulations directly reveal that rather than rigid, well-defined pores, these peptides can form a large repertoire of functional dynamic and heterogeneous aggregates, strongly affected by single mutations. Predicting the propensity to aggregate and assemble in a given environment from sequence alone holds the key to functional prediction of membrane permeabilization.

The Location of the Antimicrobial Peptide Maculatin 1.1 in Model Bacterial Membranes

Maculatin 1.1 (Mac1) is an antimicrobial peptide (AMP) from the skin secretions of Australian tree frogs. In this work, the interaction of Mac1 with anionic phospholipid bilayers was investigated by NMR, circular dichroism (CD) spectroscopy, neutron reflectometry (NR) and molecular dynamics (MD). In buffer, the peptide is unstructured but in the presence of anionic (DPC/LMPG) micelles or (DMPC/DMPG/DHPC) bicelles adopts a helical structure. Addition of the soluble paramagnetic agent gadolinium (Gd-DTPA) into the Mac1-DPC/LMPG micelle solution showed that the N-terminus is more exposed to the hydrophilic Gd-DTPA than the C-terminus in micelles. ²H and ³¹P solid-state NMR showed that Mac1 had a greater effect on the anionic lipid (DMPG). A deuterium labeled Mac1 used in NR experiments indicated that the AMP spanned across anionic (PC/PG) bilayers, which was compatible with MD simulations. Simulations also showed that Mac1 orientation remained transmembrane in bilayers and wrapped on the surface of the micelles regardless of the lipid or detergent charge. Thus, the peptide orientation appears to be more susceptible to curvature than charged surface. These results support the formation of transmembrane pores by Mac1 in model bacterial membranes.

Biophysical approaches for exploring lipopeptide-lipid interactions

In recent years, lipopeptides (LPs) have attracted a lot of attention in the pharmaceutical industry due to their broad-spectrum of antimicrobial activity against a variety of pathogens and their unique mode of action. This class of compounds has enormous potential for application as an alternative to conventional antibiotics and for pest control. Understanding how LPs work from a structural and biophysical standpoint through investigating their interaction with cell membranes is crucial for the rational design of these biomolecules. Various analytical techniques have been developed for studying intramolecular interactions with high resolution. However, these tools have been barely exploited in lipopeptide-lipid interactions studies. These biophysical approaches would give precise insight on these interactions. Here, we reviewed these state-of-the-art analytical techniques. Knowledge at this level is indispensable for understanding LPs activity and particularly their potential specificity, which is relevant information for safe application. Additionally, the principle of each analytical technique is presented and the information acquired is discussed. The key challenges, such as the selection of the membrane model are also been briefly reviewed.

Structural Analysis and Design of Chionodracine-Derived Peptides Using Circular Dichroism and Molecular Dynamics Simulations

Antimicrobial peptides have been identified as one of the alternatives to the extensive use of common antibiotics as they show a broad spectrum of activity against human pathogens. Among these is Chionodracine (Cnd), a host-defense peptide isolated from the Antarctic icefish Chionodraco hamatus, which belongs to the family of Piscidins. Previously, we demonstrated that Cnd and its analogs display high antimicrobial activity against ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter species). Herein, we investigate the interactions with lipid membranes of Cnd and two analogs, Cnd-m3 and Cnd-m3a, showing enhanced potency. Using a combination of Circular Dichroism, fluorescence spectroscopy, and all-atom Molecular Dynamics (MD) simulations, we determined the structural basis for the different activity among these peptides. We show that all peptides are predominantly unstructured in water and fold, preferentially as α-helices, in the presence of lipid vesicles of various compositions. Through a series of MD simulations of 400 ns time scale, we show the effect of mutations on the structure and lipid interactions of Cnd and its analogs. By explaining the structural basis for the activity of these analogs, our findings provide structural templates to design minimalistic peptides for therapeutics.

Development and Challenges of Antimicrobial Peptides for Therapeutic Applications

More than 3000 antimicrobial peptides (AMPs) have been discovered, seven of which have been approved by the U.S. Food and Drug Administration (FDA). Now commercialized, these seven peptides have mostly been utilized for topical medications, though some have been injected into the body to treat severe bacterial infections. To understand the translational potential for AMPs, we analyzed FDA-approved drugs in the FDA drug database. We examined their physicochemical properties, secondary structures, and mechanisms of action, and compared them with the peptides in the AMP database. All FDA-approved AMPs were discovered in Gram-positive soil bacteria, and 98% of known AMPs also come from natural sources (skin secretions of frogs and toxins from different species). However, AMPs can have undesirable properties as drugs, including instability and toxicity. Thus, the design and construction of effective AMPs require an understanding of the mechanisms of known peptides and their effects on the human body. This review provides an overview to guide the development of AMPs that can potentially be used as antimicrobial drugs.

Mechanisms of a Small Membrane-Active Antimicrobial Peptide from Hyla punctata

Thousands of antimicrobial peptides have been observed and studied in the past decades; however, their membrane-active mechanisms are ambiguous due to their dynamic structure in the cell membrane. Here, we applied both molecular dynamics (MD) simulations and biophysical experiments to study the small membrane-active antimicrobial peptide Hylaseptin P1 (HSP1), which has significant selectivity towards anionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (POPG) and bacterial model membranes. HSP1 does not bind and fold onto human red blood cell model membranes, and it only binds, but does not fold, in zwitterionic 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) membranes. This suggests that the lipid chemistry and membrane rigidity are key to prevent HSP1 binding onto membranes, and the lipid headgroup charge may further promote peptide folding in the membrane. Our experiment-validated MD simulations suggest a carpet-like model mechanism for HSP1 through peptide binding, folding, aggregation, and assembly. HSP1 is shorter than the membrane thickness; therefore, the folded peptides aggregate on the surface, cross the membrane, and the oligomeric structure is supported by several surface-bound peptides in both bilayer leaflets.

Therapeutic Potential of Trp-Rich Engineered Amphiphiles by Single Hydrophobic Amino Acid End-Tagging

End-tagging with a single hydrophobic residue contributes to improve the cell selectivity of antimicrobial peptides (AMPs), but systematic studies have been lacking. Thus, this study aimed to systematically investigate how end-tagging with hydrophobic residues at the C-terminus and Gly capped at the N-terminus of W4 (RWRWWWRWR) affects the bioactivity of W4 variants. Among all the hydrophobic residues, only Ala end-tagging improved the antibacterial activity of W4. Meanwhile, Gly capped at the N-terminus could promote the helical propensity of the end-tagged peptides in dodecylphosphocholine micelles, increasing their antimicrobial activities. Of these peptides, GW4A (GRWRWWWRWRA) showed the best antibacterial activity against the 19 species of bacteria tested (GM_MIC = 1.86 μM) with low toxicity, thus possessing the highest cell selectivity (TI_all = 137.63). It also had rapid sterilization, good salt and serum resistance, and LPS-neutralizing activity. Antibacterial mechanism studies showed that the short peptide GW4A killed bacteria by destroying cell membrane integrity and causing cytoplasmic leakage. Overall, these findings suggested that systematic studies on terminal modifications promoted the development of peptide design theory and provided a potential method for optimization of effective AMPs.

Simulation-Guided Rational de Novo Design of a Small Pore-Forming Antimicrobial Peptide

In the age of failing small-molecule antibiotics, tapping the near-infinite structural and chemical repertoire of antimicrobial peptides (AMPs) offers one of the most promising routes toward developing next-generation antibacterial compounds. One of the key impediments en route is the lack of methodologies for systematic rational design and optimization of new AMPs. Here we present a new simulation-guided rational design approach and apply it to develop a potent new AMP. We show that unbiased atomic detail molecular dynamics (MD) simulations are able to predict structures formed by evolving peptide designs enabling structure-based rational fine-tuning of functional properties. Starting from a 14-residue poly leucine template we demonstrate the design of a minimalistic potent new AMP. Consisting of only four types of amino acids (LDKA), this peptide forms large pores in microbial membranes at very low peptide-to-lipid ratios (1:1000) and exhibits low micromolar activity against common Gram-positive and Gram-negative pathogenic bacteria. Remarkably, the four amino acids were sufficient to encode preferential poration of bacterial membranes with negligible damage to red blood cells at bactericidal concentrations. As the sequence is too short to span cellular membranes, pores are formed by stacking of channels in each bilayer leaflet.

Exploring Molecular-Biomembrane Interactions with Surface Plasmon Resonance and Dual Polarization Interferometry Technology: Expanding the Spotlight onto Biomembrane Structure

The molecular analysis of biomolecular-membrane interactions is central to understanding most cellular systems but has emerged as a complex technical challenge given the complexities of membrane structure and composition across all living cells. We present a review of the application of surface plasmon resonance and dual polarization interferometry-based biosensors to the study of biomembrane-based systems using both planar mono- or bilayers or liposomes. We first describe the optical principals and instrumentation of surface plasmon resonance, including both linear and extraordinary transmission modes and dual polarization interferometry. We then describe the wide range of model membrane systems that have been developed for deposition on the chips surfaces that include planar, polymer cushioned, tethered bilayers, and liposomes. This is followed by a description of the different chemical immobilization or physisorption techniques. The application of this broad range of engineered membrane surfaces to biomolecular-membrane interactions is then overviewed and how the information obtained using these techniques enhance our molecular understanding of membrane-mediated peptide and protein function. We first discuss experiments where SPR alone has been used to characterize membrane binding and describe how these studies yielded novel insight into the molecular events associated with membrane interactions and how they provided a significant impetus to more recent studies that focus on coincident membrane structure changes during binding of peptides and proteins. We then discuss the emerging limitations of not monitoring the effects on membrane structure and how SPR data can be combined with DPI to provide significant new information on how a membrane responds to the binding of peptides and proteins.

Antimicrobial Photodynamic therapy enhanced by the peptide aurein 1.2

In the past few years, the World Health Organization has been warning that the post-antibiotic era is an increasingly real threat. The rising and disseminated resistance to antibiotics made mandatory the search for new drugs and/or alternative therapies that are able to eliminate resistant microorganisms and impair the development of new forms of resistance. In this context, antimicrobial photodynamic therapy (aPDT) and helical cationic antimicrobial peptides (AMP) are highlighted for the treatment of localized infections. This study aimed to combine the AMP aurein 1.2 to aPDT using Enterococcus faecalis as a model strain. Our results demonstrate that the combination of aPDT with aurein 1.2 proved to be a feasible alternative capable of completely eliminating E. faecalis employing low concentrations of both PS and AMP, in comparison with the individual therapies. Aurein 1.2 is capable of enhancing the aPDT activity whenever mediated by methylene blue or chlorin-e6, but not by curcumin, revealing a PS-dependent mechanism. The combined treatment was also effective against different strains; noteworthy, it completely eliminated a vancomycin-resistant strain of Enterococcus faecium. Our results suggest that this combined protocol must be exploited for clinical applications in localized infections as an alternative to antibiotics.

Antimicrobial Peptide Structures: From Model Membranes to Live Cells

The rise in antibiotic resistance has led to a renewed interest in antimicrobial peptides (AMPs) that target membranes. The mode of action of AMPs involves the disruption of the lipid bilayer and leads to growth inhibition and death of the bacteria. However, details at the molecular level of how these peptides kill bacteria and the reasons for the observed differences in selectivity remain unclear. Structural information is crucial for defining the molecular mechanism by which these peptides recognize, self-assemble and interact with a particular lipid membrane. Solid-state NMR is a non-invasive technique that allows the study of the structural details of lipid-peptide and peptide-peptide interactions. Following on from studies of antibiotic and lytic peptides, gramicidin A and melittin, respectively, we investigated maculatin 1.1, an AMP from the skin of Australian tree frogs that acts against Gram-positive bacteria. By using perdeuterated phospholipids and specifically labelled peptides, ² H, ³¹ P and {³¹ P}¹⁵ N REDOR solid-state NMR experiments have been used to localize, maculatin 1.1 in neutral and anionic model membranes. However, the structure, location and activity depend on the composition of the model membrane and current advances in solid-state NMR spectroscopy now allow structure determination of AMPs in live bacteria.

Mode of Action of a Designed Antimicrobial Peptide: High Potency against Cryptococcus neoformans

There is a significant need for developing compounds that kill Cryptococcus neoformans, the fungal pathogen that causes meningoencephalitis in immunocompromised individuals. Here, we report the mode of action of a designed antifungal peptide, VG16KRKP (VARGWKRKCPLFGKGG) against C. neoformans. It is shown that VG16KRKP kills fungal cells mainly through membrane compromise leading to efflux of ions and cell metabolites. Intracellular localization, inhibition of in vitro transcription, and DNA binding suggest a secondary mode of action for the peptide, hinting at possible intracellular targets. Atomistic structure of the peptide determined by NMR experiments on live C. neoformans cells reveals an amphipathic arrangement stabilized by hydrophobic interactions among A2, W5, and F12, a conventional folding pattern also known to play a major role in peptide-mediated Gram-negative bacterial killing, revealing the importance of this motif. These structural details in the context of live cell provide valuable insights into the design of potent peptides for effective treatment of human and plant fungal infections.

One pathogen two stones: are Australian tree frog antimicrobial peptides synergistic against human pathogens?

Antimicrobial peptides (AMPs) may act by targeting the lipid membranes and disrupting the bilayer structure. In this study, three AMPs from the skin of Australian tree frogs, aurein 1.2, maculatin 1.1 and caerin 1.1, were investigated against Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus, and vesicles that mimic their lipid compositions. Furthermore, equimolar mixtures of the peptides were tested to identify any synergistic interactions in antimicrobial activity. Minimum inhibition concentration and minimum bactericidal concentration assays showed significant activity against S. aureus but not against E. coli. Aurein was the least active while maculatin was the most active peptide and some synergistic effects were observed against S. aureus. Circular dichroism experiments showed that, in the presence of phospholipid vesicles, the peptides transitioned from an unstructured to a predominantly helical conformation (>50%), with greater helicity for POPG/TOCL compared to POPE/POPG vesicles. The helical content, however, was less in the presence of live E. coli and S. aureus, 25 and 5%, respectively. Equimolar concentrations of the peptides did not appear to form greater supramolecular structures. Dye release assays showed that aurein required greater concentration than caerin and maculatin to disrupt the lipid bilayers, and mixtures of the peptides did not cooperate to enhance their lytic activity. Overall, aurein, maculatin, and caerin showed moderate synergy in antimicrobial activity against S. aureus without becoming more structured or enhancement of their membrane-disrupting activity in phospholipid vesicles.

How Membrane-Active Peptides Get into Lipid Membranes

The structure-function relationship for a family of antimicrobial peptides (AMPs) from the skin of Australian tree frogs is discussed and compared with that of peptide toxins from bee and Australian scorpion venoms. Although these membrane-active peptides induce a similar cellular fate by disrupting the lipid bilayer integrity, their lytic activity is achieved via different modes of action, which are investigated in relation to amino acid sequence, secondary structure, and membrane lipid composition. In order to better understand what structural features govern the interaction between peptides and lipid membranes, cell-penetrating peptides (CPPs), which translocate through the membrane without compromising its integrity, are also discussed. AMPs possess membrane lytic activities that are naturally designed to target the cellular membrane of pathogens or competitors. They are extremely diverse in amino acid composition and often show specificity against a particular strain of microbe. Since our antibiotic arsenal is declining precariously in the face of the rise in multiantibiotic resistance, AMPs increasingly are seen as a promising alternative. In an effort to understand their molecular mechanism, biophysical studies of a myriad of AMPs have been reported, yet no unifying mechanism has emerged, rendering difficult the rational design of drug leads. Similarly, a wide variety of cytotoxic peptides are found in venoms, the best known being melittin, yet again, predicting their activity based on a particular amino acid composition or secondary structure remains elusive. A common feature of these membrane-active peptides is their preference for the lipid environment. Indeed, they are mainly unstructured in solution and, in the presence of lipid membranes, quickly adsorb onto the surface, change their secondary structure, eventually insert into the hydrophobic core of the membrane bilayer, and finally disrupt the bilayer integrity. These steps define the molecular mechanism by which these membrane-active peptides lyse membranes. The last class of membrane-active peptides discussed are the CPPs, which translocate across the lipid bilayer without inducing severe disruption and have potential as drug vehicles. CPPs are typically highly charged and can show antimicrobial activity by targeting an intracellular target rather than via a direct membrane lytic mechanism. A critical aspect in the structure-function relationship of membrane-active peptides is their specific activity relative to the lipid membrane composition of the cell target. Cell membranes have a wide diversity of lipids, and those of eukaryotic and prokaryotic species differ greatly in composition and structure. The activity of AMPs from Australian tree frogs, toxins, and CPPs has been investigated within various lipid systems to assess whether a relationship between peptide and membrane composition could be identified. NMR spectroscopy techniques are being used to gain atomistic details of how these membrane-active peptides interact with model membranes and cells, and in particular, competitive assays demonstrate the difference between affinity and activity for a specific lipid environment. Overall, the interactions between these relatively small sized peptides and various lipid bilayers give insight into how these peptides function at the membrane interface.