OmpA can form folded and unfolded oligomers

FkpA enhances membrane protein folding using an extensive interaction surface

Outer membrane protein (OMP) biogenesis in gram-negative bacteria is managed by a network of periplasmic chaperones that includes SurA, Skp, and FkpA. These chaperones bind unfolded OMPs (uOMPs) in dynamic conformational ensembles to suppress aggregation, facilitate diffusion across the periplasm, and enhance folding. FkpA primarily responds to heat-shock stress, but its mechanism is comparatively understudied. To determine FkpA chaperone function in the context of OMP folding, we monitored the folding of three OMPs and found that FkpA, unlike other periplasmic chaperones, increases the folded yield but decreases the folding rate of OMPs. The results indicate that FkpA behaves as a chaperone and not as a folding catalyst to influence the OMP folding trajectory. Consistent with the folding assay results, FkpA binds all three uOMPs as determined by sedimentation velocity (SV) and photo-crosslinking experiments. We determine the binding affinity between FkpA and uOmpA171 by globally fitting SV titrations and find it to be intermediate between the known affinities of Skp and SurA for uOMP clients. Notably, complex formation steeply depends on the urea concentration, suggesting an extensive binding interface. Initial characterizations of the complex using photo-crosslinking indicate that the binding interface spans the entire FkpA molecule. In contrast to prior findings, folding and binding experiments performed using subdomain constructs of FkpA demonstrate that the full-length chaperone is required for full activity. Together these results support that FkpA has a distinct and direct effect on OMP folding that it achieves by utilizing an extensive chaperone-client interface to tightly bind clients.

De novo design of transmembrane β barrels

Transmembrane β-barrel proteins (TMBs) are of great interest for single-molecule analytical technologies because they can spontaneously fold and insert into membranes and form stable pores, but the range of pore properties that can be achieved by repurposing natural TMBs is limited. We leverage the power of de novo computational design coupled with a "hypothesis, design, and test" approach to determine TMB design principles, notably, the importance of negative design to slow β-sheet assembly. We design new eight-stranded TMBs, with no homology to known TMBs, that insert and fold reversibly into synthetic lipid membranes and have nuclear magnetic resonance and x-ray crystal structures very similar to the computational models. These advances should enable the custom design of pores for a wide range of applications.

Fake It 'Till You Make It-The Pursuit of Suitable Membrane Mimetics for Membrane Protein Biophysics

Membrane proteins evolved to reside in the hydrophobic lipid bilayers of cellular membranes. Therefore, membrane proteins bridge the different aqueous compartments separated by the membrane, and furthermore, dynamically interact with their surrounding lipid environment. The latter not only stabilizes membrane proteins, but directly impacts their folding, structure and function. In order to be characterized with biophysical and structural biological methods, membrane proteins are typically extracted and subsequently purified from their native lipid environment. This approach requires that lipid membranes are replaced by suitable surrogates, which ideally closely mimic the native bilayer, in order to maintain the membrane proteins structural and functional integrity. In this review, we survey the currently available membrane mimetic environments ranging from detergent micelles to bicelles, nanodiscs, lipidic-cubic phase (LCP), liposomes, and polymersomes. We discuss their respective advantages and disadvantages as well as their suitability for downstream biophysical and structural characterization. Finally, we take a look at ongoing methodological developments, which aim for direct in-situ characterization of membrane proteins within native membranes instead of relying on membrane mimetics.

Kinetics of Insertion and Folding of Outer Membrane Proteins by Gel Electrophoresis

To examine the mechanisms of folding and insertion of TMPs into membranes, kinetic studies are instrumental, for example, for the analysis of folding steps and involved intermediates or for the determination of activation energies. For many β-barrel transmembrane proteins (β-TMPs) it has been shown that the folded, functional form can be separated from the unfolded form by a simple electrophoretic mobility assay. The only requirements for a separation by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) are that the folded form is sufficiently stable and that the samples are not heat-denatured before the electrophoresis is performed. Many folded β-TMPs resist the treatment with SDS at room temperature and are stable against forces during electrophoresis. On the other side, SDS also binds to unfolded forms of β-TMPs and prevents their folding into β-barrel structure. These observations have been used to develop a simple assay to monitor the kinetics of β-barrel tertiary structure formation in a membrane environment by electrophoresis. A folding reaction of a β-TMP is initiated by dilution of the denaturant in the presence of preformed lipid bilayers, proteoliposomes or membrane vesicles. At selected times, samples are taken from the reaction. In these samples, folding is stopped by addition of SDS. At the end of the entire folding reaction, all samples are analyzed by SDS-PAGE and the fractions of folded β-TMP that they contain are determined by densitometry.An advantage of this kinetic assay is that it not only allows a direct determination of fractions of folded and unfolded forms at a selected time during folding of the β-TMP into a membrane, but also facilitates the determination of the impact of folding factors (e.g., molecular chaperones) or folding machinery that most often have a different molecular mass and electrophoretic mobility. The assay has been very useful to examine how folding and insertion is affected by the structure of the phospholipids in the lipid bilayer and how folding machinery compensates for the presence of membrane lipids that retard folding and insertion of β-TMPs.

The Bam complex catalyzes efficient insertion of bacterial outer membrane proteins into membrane vesicles of variable lipid composition

Most proteins that reside in the bacterial outer membrane (OM) have a distinctive "β-barrel" architecture, but the assembly of these proteins is poorly understood. The spontaneous assembly of OM proteins (OMPs) into pure lipid vesicles has been studied extensively but often requires non-physiological conditions and time scales and is strongly influenced by properties of the lipid bilayer, including surface charge, thickness, and fluidity. Furthermore, the membrane insertion of OMPs in vivo is catalyzed by a heterooligomer called the β-barrel assembly machinery (Bam) complex. To determine the role of lipids in the assembly of OMPs under more physiological conditions, we exploited an assay in which the Bam complex mediates their insertion into membrane vesicles. After reconstituting the Bam complex into vesicles that contain a variety of different synthetic lipids, we found that two model OMPs, EspP and OmpA, folded efficiently regardless of the lipid composition. Most notably, both proteins folded into membranes composed of a gel-phase lipid that mimics the rigid bacterial OM. Interestingly, we found that EspP, OmpA, and another model protein (OmpG) folded at significantly different rates and that an α-helix embedded inside the EspP β-barrel accelerates folding. Our results show that the Bam complex largely overcomes effects that lipids exert on OMP assembly and suggest that specific interactions between the Bam complex and an OMP influence its rate of folding.

Outer membrane protein folding from an energy landscape perspective

The cell envelope is essential for the survival of Gram-negative bacteria. This specialised membrane is densely packed with outer membrane proteins (OMPs), which perform a variety of functions. How OMPs fold into this crowded environment remains an open question. Here, we review current knowledge about OMP folding mechanisms in vitro and discuss how the need to fold to a stable native state has shaped their folding energy landscapes. We also highlight the role of chaperones and the β-barrel assembly machinery (BAM) in assisting OMP folding in vivo and discuss proposed mechanisms by which this fascinating machinery may catalyse OMP folding.

Structure, function and regulation of Pseudomonas aeruginosa porins

Pseudomonas aeruginosa is a Gram-negative bacterium belonging to the γ-proteobacteria. Like other members of the Pseudomonas genus, it is known for its metabolic versatility and its ability to colonize a wide range of ecological niches, such as rhizosphere, water environments and animal hosts, including humans where it can cause severe infections. Another particularity of P. aeruginosa is its high intrinsic resistance to antiseptics and antibiotics, which is partly due to its low outer membrane permeability. In contrast to Enterobacteria, pseudomonads do not possess general diffusion porins in their outer membrane, but rather express specific channel proteins for the uptake of different nutrients. The major outer membrane 'porin', OprF, has been extensively investigated, and displays structural, adhesion and signaling functions while its role in the diffusion of nutrients is still under discussion. Other porins include OprB and OprB2 for the diffusion of glucose, the two small outer membrane proteins OprG and OprH, and the two porins involved in phosphate/pyrophosphate uptake, OprP and OprO. The remaining nineteen porins belong to the so-called OprD (Occ) family, which is further split into two subfamilies termed OccD (8 members) and OccK (11 members). In the past years, a large amount of information concerning the structure, function and regulation of these porins has been published, justifying why an updated review is timely.

Concatemers of Outer Membrane Protein A Take Detours in the Folding Landscape

Outer membrane protein A (OmpA) is the most abundant protein in the outer membrane of Escherichia coli. The N-terminal domain forms an eight-stranded membrane-embedded β-barrel that is widely used as a model protein for in vitro folding into the membrane and into surfactant micelles. Under conditions that include a low surfactant concentration, OmpA can form stable higher-order structures by intermolecular association. Other β-barrel membrane proteins also associate to form noncovalently linked trimers in vivo. This inspired us to test how topological constraints imposed by intramolecular links between individual OmpA molecules affect this process. Here we report on the properties of concatemers consisting of two and three copies of the transmembrane part of OmpA. Both concatemers could be folded to a native state in surfactant micelles according to spectroscopy and electrophoretic band shifts. This native state had the same thermodynamic stability against chemical denaturation as the original OmpA. Above 1.5 M GdmCl, concatemerization increased both refolding and unfolding rates, which we attribute to entropic effects. However, below 1.5 M GdmCl, folding kinetics were 2-3 orders of magnitude slower and more complex, involving a greater degree of parallel folding steps and species that could be classified as off-pathway. Only OmpA2 could quantitatively be folded into vesicles (though to an extent lower than that of OmpA), while OmpA3 formed three species with different levels of folding. Thus, close spatial and sequential proximity of OmpA domains on the same polypeptide chain have a strong tendency to trap the protein in different misfolded states.

Novel Kinetic Intermediates Populated along the Folding Pathway of the Transmembrane β-Barrel OmpA

We examined the folding of the β-barrel membrane protein OmpA from Escherichia coli. Although previous studies identified several intermediate states followed by a concerted translocation mechanism across the bilayer, some aspects of the pathway were still unclear, including the extent of secondary structure formation in the intermediate states and how the mechanism gave rise to multiple exponential phases in the folding kinetics. We addressed these questions by investigating the folding kinetics of the OmpA transmembrane β-barrel domain over a range of bilayer thicknesses, allowing us to observe different regions of the folding pathway. The fastest folding into the thinnest bilayers provided information about the later stages of the process, and the slowest folding into thicker bilayers revealed early kinetic steps. Folding was monitored using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and circular dichroism spectroscopy, which provide complementary information about tertiary and secondary structure formation. We globally fit the folding data to kinetic schemes and found that the same core pathway was followed under all lipid conditions. We propose a multistep folding mechanism for OmpA that includes unstructured surface-adsorbed states converting through a partially inserted state with substantial β-sheet structure to the final natively inserted barrel. Kinetic models show that all steps of the main folding pathway are accelerated by membrane defects that occur as a result of thinning the bilayer or incubation of lipids at the phase transition temperature. In addition to suppressing off-pathway states, β-barrel assembly machinery-catalyzed folding in vivo could accelerate any or all of these main folding steps to ensure efficient outer membrane protein biogenesis in vivo.

In Silico Structure and Sequence Analysis of Bacterial Porins and Specific Diffusion Channels for Hydrophilic Molecules: Conservation, Multimericity and Multifunctionality

Diffusion channels are involved in the selective uptake of nutrients and form the largest outer membrane protein (OMP) family in Gram-negative bacteria. Differences in pore size and amino acid composition contribute to the specificity. Structure-based multiple sequence alignments shed light on the structure-function relations for all eight subclasses. Entropy-variability analysis results are correlated to known structural and functional aspects, such as structural integrity, multimericity, specificity and biological niche adaptation. The high mutation rate in their surface-exposed loops is likely an important mechanism for host immune system evasion. Multiple sequence alignments for each subclass revealed conserved residue positions that are involved in substrate recognition and specificity. An analysis of monomeric protein channels revealed particular sequence patterns of amino acids that were observed in other classes at multimeric interfaces. This adds to the emerging evidence that all members of the family exist in a multimeric state. Our findings are important for understanding the role of members of this family in a wide range of bacterial processes, including bacterial food uptake, survival and adaptation mechanisms.

Interaction of heat shock protein 70 with membranes depends on the lipid environment

Heat shock proteins (hsp) are well recognized for their protein folding activity. Additionally, hsp expression is enhanced during stress conditions to preserve cellular homeostasis. Hsp are also detected outside cells, released by an active mechanism independent of cell death. Extracellular hsp appear to act as signaling molecules as part of a systemic response to stress. Extracellular hsp do not contain a consensus signal for their secretion via the classical ER-Golgi compartment. Therefore, they are likely exported by an alternative mechanism requiring translocation across the plasma membrane. Since Hsp70, the major inducible hsp, has been detected on surface of stressed cells, we propose that membrane interaction is the first step in the export process. The question that emerges is how does this charged cytosolic protein interact with lipid membranes? Prior studies have shown that Hsp70 formed ion conductance pathways within artificial lipid bilayers. These early observations have been extended herewith using a liposome insertion assay. We showed that Hsp70 selectively interacted with negatively charged phospholipids, particularly phosphatidyl serine (PS), within liposomes, which was followed by insertion into the lipid bilayer, forming high-molecular weight oligomers. Hsp70 displayed a preference for less fluid lipid environments and the region embedded into the lipid membrane was mapped toward the C-terminus end of the molecule. The results from our studies provide evidence of an unexpected ability of a large, charged protein to become inserted into a lipid membrane. This observation provides a new paradigm for the interaction of proteins with lipid environments. In addition, it may explain the export mechanism of an increasing number of proteins that lack the consensus secretory signals.

Differential contribution of tryptophans to the folding and stability of the attachment invasion locus transmembrane β-barrel from Yersinia pestis

Attachment invasion locus (Ail) protein of Yersinia pestis is a crucial outer membrane protein for host invasion and determines bacterial survival within the host. Despite its importance in pathogenicity, surprisingly little is known on Ail biophysical properties. We investigate the contribution of micelle concentrations and interface tryptophans on the Ail β-barrel refolding and unfolding processes. Our results reveal that barrel folding is surprisingly independent of micelle amounts, but proceeds through an on-pathway intermediate that requires the interface W42 for cooperative barrel refolding. On the contrary, the unfolding event is strongly controlled by absolute micelle concentrations. We find that upon Trp → Phe substitution, protein stabilities follow the order W149F>WT>W42F for the refolding, and W42F>WT>W149F for unfolding. W42 confers cooperativity in barrel folding, and W149 clamps the post-folded barrel structure to its micelle environment. Our analyses reveal, for the first time, that interface tryptophan mutation can indeed render greater β-barrel stability. Furthermore, hysteresis in Ail stems from differential barrel-detergent interaction strengths in a micelle concentration-dependent manner, largely mediated by W149. The kinetically stabilized Ail β-barrel has strategically positioned tryptophans to balance efficient refolding and subsequent β-barrel stability, and may be evolutionarily chosen for optimal functioning of Ail during Yersinia pathogenesis.

High resolution clear native electrophoresis is a good alternative to blue native electrophoresis for the characterization of the Escherichia coli membrane complexes

Blue native electrophoresis (BNE) has become the most popular method for the global analysis of membrane protein complexes. Although it has been shown to be very useful for that purpose, it can produce the dissociation of complexes with weak interactions and, due to the use of Coomassie Brilliant Blue, does not allow the subsequent application of fluorimetric and/or enzymatic techniques. Recently, we have successfully used the high resolution clear native electrophoresis (hrCNE) for the analysis of Neisseria meningitidis outer membrane porin complexes. The aim of this study was to determine the composition of the complexome of the Escherichia coli envelope by using hrCNE and to compare our results with those previously obtained using BNE. The bidimensional electrophoresis approaches used, hrCN/hrCNE and hrCN/SDS-PAGE, coupled to mass spectrometry allowed a detailed analysis of the complexome of E. coli membranes. For the first time, the three subunits of the formate dehydrogenase FDH-O were identified forming a single complex and hrCNE also allowed the identification of both the HflK and HflC proteins as components of the HflA complex. This technique also allowed us to suggest a relationship between OmpF and DLDH and, although OmpA is considered to be monomeric in vivo, we found this protein structured as homodimers. Thus hrCNE provides a good tool for future analyses of bacterial membrane proteins and complexes and is an important alternative to the commonly used BNE.

Folding of outer membrane protein A in the anionic biosurfactant rhamnolipid

Folding and stability of bacterial outer membrane proteins (OMPs) are typically studied in vitro using model systems such as phospholipid vesicles or surfactant. OMP folding requires surfactant concentrations above the critical micelle concentration (cmc) and usually only occurs in neutral or zwitterionic surfactants, but not in anionic or cationic surfactants. Various Gram-negative bacteria produce the anionic biosurfactant rhamnolipid. Here we show that the OMP OmpA can be folded in rhamnolipid at concentrations above the cmc, though the thermal stability is reduced compared to the non-ionic surfactant dodecyl maltoside. We discuss implications for possible interactions between OMPs and biosurfactants in vivo.

Effect of pressure on refolding of recombinant pentameric cholera toxin B

The production of recombinant proteins is an essential tool for the expansion of modern biological research and biotechnology. The expression of heterologous proteins in Escherichia coli often results in an incomplete folding process that leads to the accumulation of inclusion bodies (IB), aggregates that hold a certain degree of native-like secondary structure. High hydrostatic pressure (HHP) impairs intermolecular hydrophobic and electrostatic interactions, leading to dissociation of aggregates under non-denaturing conditions and is therefore a useful tool to solubilize proteins for posterior refolding. Cholera toxin (CT) is composed of a non-toxic pentamer of B subunits (CTB), a useful adjuvant in vaccines, and a toxic subunit A (CTA). We studied the process of refolding of CTB using HHP. HHP was shown to be effective for dissociation of CTB monomers from IB. Posterior incubation at atmospheric pressure of concentrated CTB (1mg/ml) is necessary for the association of the monomers. Pentameric CTB was obtained when suspensions of CTB IB were compressed at 2.4kbar for 16h in the presence of Tween 20 and incubated at 1bar for 120h. Soluble and biologically active pentameric CTB was obtained, with a yield of 213mg CTB/liter of culture. The experience gained in this study can be important to improve the refolding of proteins with quaternary structure.

Methionine mutations of outer membrane protein X influence structural stability and beta-barrel unfolding

We report the biochemical and biophysical characterization of outer membrane protein X (OmpX), an eight-stranded transmembrane β-barrel from E. coli, and compare the barrel behavior with a mutant devoid of methionine residues. Transmembrane outer membrane proteins of bacterial origin are known to display high tolerance to sequence rearrangements and mutations. Our studies with the triple mutant of OmpX that is devoid of all internal methionine residues (M18L; M21L; M118L) indicate that Met replacement has no influence on the refolding efficiency and structural characteristics of the protein. Surprisingly, the conserved substitution of Met→Leu leads to barrel destabilization and causes a lowering of the unfolding free energy by a factor of ∼8.5 kJ/mol, despite the mutations occurring at the loop regions. We report that the barrel destabilization is accompanied by a loss in cooperativity of unfolding in the presence of chemical denaturants. Furthermore, we are able to detect an unfolding intermediate in the Met-less barrel, whereas the parent protein exhibits a classic two-state unfolding. Thermal denaturation measurements also suggest a greater susceptibility of the OmpX barrel to heat, in the Met-less construct. Our studies reveal that even subtle variations in the extra-membrane region of rigid barrel structures such as OmpX, may bear severe implications on barrel stability. We propose that methionines contribute to efficient barrel structuring and protein-lipid interactions, and are therefore important elements of OmpX stability.

The lipid bilayer-inserted membrane protein BamA of Escherichia coli facilitates insertion and folding of outer membrane protein A from its complex with Skp

Folding of β-barrel membrane proteins, either from a urea-unfolded form or from chaperone-bound aqueous forms, has been characterized for pure lipid bilayers. The impact of preinserted integral proteins from biomembranes has not been examined in biophysical comparisons, but this knowledge is important for the characterization of protein assembly machinery in membranes to distinguish specific effects from unspecific effects. Here, folding was studied for a β-barrel membrane protein, outer membrane protein A (OmpA) from Escherichia coli, in the absence and presence of two other preinserted integral proteins, BamA of the β-barrel assembly machinery complex (BAM) from E. coli and FomA from Fusobacterium nucleatum. Three different preformed lipid membranes of phosphatidylcholine were prepared to compare the folding kinetics of OmpA, namely, proteoliposomes containing either BamA or FomA and pure liposomes. Urea-unfolded OmpA folded faster into phosphatidylcholine bilayers containing FomA than into pure lipid bilayers, but the kinetics of OmpA folding and insertion were fastest for bilayers containing BamA. Incorporation of BamA into lipid bilayers composed of phosphatidylcholine and phosphatidylethanolamine greatly weakened the inhibiting effect of phosphatidylethanolamine on the folding of OmpA. Folding of OmpA from its complex with the periplasmic chaperone Skp into bilayers composed of phosphatidylethanolamine and phosphatidylcholine was inhibited in the absence of BamA but facilitated when BamA was present, indicating an interaction of Skp-OmpA complexes with BamA.