Effects of cardiac myosin binding protein-C on the regulation of interaction of cardiac myosin with thin filament in an in vitro motility assay

N-Terminal Fragment of Cardiac Myosin Binding Protein C Modulates Cooperative Mechanisms of Thin Filament Activation in Atria and Ventricles

Cardiac myosin binding protein C (cMyBP-C) is one of the essential control components of the myosin cross-bridge cycle. The C-terminal part of cMyBP-C is located on the surface of the thick filament, and its N-terminal part interacts with actin, myosin, and tropomyosin, affecting both kinetics of the ATP hydrolysis cycle and lifetime of the cross-bridge, as well as calcium regulation of the actin-myosin interaction, thereby modulating contractile function of myocardium. The role of cMyBP-C in atrial contraction has not been practically studied. We examined effect of the N-terminal C0-C1-m-C2 (C0-C2) fragment of cMyBP-C on actin-myosin interaction using ventricular and atrial myosin in an in vitro motility assay. The C0-C2 fragment of cMyBP-C significantly reduced the maximum sliding velocity of thin filaments on both myosin isoforms and increased the calcium sensitivity of the actin-myosin interaction. The C0-C2 fragment had different effects on the kinetics of ATP and ADP exchange, increasing the affinity of ventricular myosin for ADP and decreasing the affinity of atrial myosin. The effect of the C0-C2 fragment on the activation of the thin filament depended on the myosin isoforms. Atrial myosin activates the thin filament less than ventricular myosin, and the C0-C2 fragment makes these differences in the myosin isoforms more pronounced.

Myopathic mutations in the β-chain of tropomyosin differently affect the structural and functional properties of ββ- and αβ-dimers

Tropomyosin (Tpm) is an actin-binding protein that plays a vital role in the regulation of muscle contraction. Fast skeletal muscles express 2 Tpm isoforms, α (Tpm 1.1) and β (Tpm 2.2), resulting in the existence of 2 forms of dimeric Tpm molecule: αα-homodimer and αβ-heterodimer. ββ-Homodimer is unstable and absent in the native state, despite which most of the studies of myopathy-relating Tpm mutations have been performed on the ββ-homodimer. Here, we applied different methods to investigate the effects of myopathic mutations R133W and N202K in the β-chain of Tpm on properties of αβ-heterodimers and to compare them with the features of ββ-homodimers with the same mutations. The results show that properties of αβ-Tpm and ββ-Tpm with substitutions in the β-chain differ significantly, and this indicates that the effects of myopathic mutations in the Tpm β-chain should be studied on the Tpm αβ-heterodimer.-Bershitsky, S. Y., Logvinova, D. S., Shchepkin, D. V., Kopylova, G. V., Matyushenko, A. M. Myopathic mutations in the β-chain of tropomyosin differently affect the structural and functional properties of ββ- and αβ-dimers.

Cooperativity of myosin interaction with thin filaments is enhanced by stabilizing substitutions in tropomyosin

Muscle contraction is powered by myosin interaction with actin-based thin filaments containing Ca²⁺-regulatory proteins, tropomyosin and troponin. Coiled-coil tropomyosin molecules form a long helical strand that winds around actin filament and either shields actin from myosin binding or opens it. Non-canonical residues G126 and D137 in the central part of tropomyosin destabilize its coiled-coil structure. Their substitutions for canonical ones, G126R and D137L, increase structural stability and the velocity of sliding of reconstructed thin filaments along myosin coated surface. The effect of these stabilizing mutations on force of the actin-myosin interaction is unknown. It also remains unclear whether the stabilization affects single actin-myosin interactions or it modifies the cooperativity of the binding of myosin molecules to actin. We used an optical trap to measure the effects of the stabilization on step size, unitary force and duration of the interactions at low and high load and compared the results with those obtained in an in vitro motility assay. We found that significant prolongation of lifetime of the actin-myosin complex under high load observed at high extent of tropomyosin stabilization, i.e. with double mutant, G126R/D137L, correlates with higher force in the motility assay. Also, the higher the extent of stabilization of tropomyosin, the fewer myosin molecules are needed to propel the thin filaments. The data suggest that the effects of the stabilizing mutations in tropomyosin on the myosin interaction with regulated thin filaments are mainly realized via cooperative mechanisms by increasing the size of cooperative unit.

Effect of Cardiac Myosin-Binding Protein C on Tropomyosin Regulation of Actin-Myosin Interaction Using In Vitro Motility Assay

We studied the modulating role of cardiac myosin-binding protein C (cMyBP-C) in tropomyosin regulation of the actin-myosin interaction. The effect of cMyBP-C on the velocity of actin-tropomyosin filament sliding over cardiac and slow skeletal myosins was evaluated using in vitro motility assay. The effect of cMyBP-C on the actin-tropomyosin filaments sliding depended on the type of myosin. The regulatory effect of cMyBP-C differs for cardiac and slow skeletal myosin because of the presence of specific essential light chain (LC1sa) in slow skeletal myosin isoform.

Investigations of Molecular Mechanisms of Actin-Myosin Interactions in Cardiac Muscle

The functional characteristics of cardiac muscle depend on the composition of protein isoforms in the cardiomyocyte contractile machinery. In the ventricular myocardium of mammals, several isoforms of contractile and regulatory proteins are expressed - two isoforms of myosin (V1 and V3) and three isoforms of tropomyosin chains (α, β, and κ). Expression of protein isoforms depends on the animal species, its age and hormonal status, and this can change with pathologies of the myocardium. Mutations in these proteins can lead to cardiomyopathies. The functional significance of the protein isoform composition has been studied mainly on intact hearts or on isolated preparations of myocardium, which could not provide a clear comprehension of the role of each particular isoform. Present-day experimental techniques such as an optical trap and in vitro motility assay make it possible to investigate the phenomena of interactions of contractile and regulatory proteins on the molecular level, thus avoiding effects associated with properties of a whole muscle or muscle tissue. These methods enable free combining of the isoforms to test the molecular mechanisms of their participation in the actin-myosin interaction. Using the optical trap and the in vitro motility assay, we have studied functional characteristics of the cardiac myosin isoforms, molecular mechanisms of the calcium-dependent regulation of actin-myosin interaction, and the role of myosin and tropomyosin isoforms in the cooperativity mechanisms in myocardium. The knowledge of molecular mechanisms underlying myocardial contractility and its regulation is necessary for comprehension of cardiac muscle functioning, its disorders in pathologies, and for development of approaches for their correction.

Structural and functional effects of two stabilizing substitutions, D137L and G126R, in the middle part of α-tropomyosin molecule

Tropomyosin (Tm) is an α-helical coiled-coil protein that binds along the length of actin filament and plays an essential role in the regulation of muscle contraction. There are two highly conserved non-canonical residues in the middle part of the Tm molecule, Asp137 and Gly126, which are thought to impart conformational instability (flexibility) to this region of Tm which is considered crucial for its regulatory functions. It was shown previously that replacement of these residues by canonical ones (Leu substitution for Asp137 and Arg substitution for Gly126) results in stabilization of the coiled-coil in the middle of Tm and affects its regulatory function. Here we employed various methods to compare structural and functional features of Tm mutants carrying stabilizing substitutions Arg137Leu and Gly126Arg. Moreover, we for the first time analyzed the properties of Tm carrying both these substitutions within the same molecule. The results show that both substitutions similarly stabilize the Tm coiled-coil structure, and their combined action leads to further significant stabilization of the Tm molecule. This stabilization not only enhances maximal sliding velocity of regulated actin filaments in the in vitro motility assay at high Ca(2+) concentrations but also increases Ca(2+) sensitivity of the actin-myosin interaction underlying this sliding. We propose that the effects of these substitutions on the Ca(2+)-regulated actin-myosin interaction can be accounted for not only by decreased flexibility of actin-bound Tm but also by their influence on the interactions between the middle part of Tm and certain sites of the myosin head.

Molecular modulation of actomyosin function by cardiac myosin-binding protein C

Cardiac myosin-binding protein C is a key regulator of cardiac contractility and is capable of both activating the thin filament to initiate actomyosin motion generation and governing maximal sliding velocities. While MyBP-C's C terminus localizes the molecule within the sarcomere, the N terminus appears to confer regulatory function by binding to the myosin motor domain and/or actin. Literature pertaining to how MyBP-C binding to the myosin motor domain and or actin leads to MyBP-C's dual modulatory roles that can impact actomyosin interactions are discussed.

The extent of cardiac myosin binding protein-C phosphorylation modulates actomyosin function in a graded manner

Cardiac myosin binding protein-C (cMyBP-C), a sarcomeric protein with 11 domains, C0-C10, binds to the myosin rod via its C-terminus, while its N-terminus binds regions of the myosin head and actin. These N-terminal interactions can be attenuated by phosphorylation of serines in the C1-C2 motif linker. Within the sarcomere, cMyBP-C exists in a range of phosphorylation states, which may affect its ability to regulate actomyosin motion generation. To examine the functional importance of partial phosphorylation, we bacterially expressed N-terminal fragments of cMyBP-C (domains C0-C3) with three of its phosphorylatable serines (S273, S282, and S302) mutated in combinations to either aspartic acids or alanines, mimicking phosphorylation and dephosphorylation respectively. The effect of these C0-C3 constructs on actomyosin motility was characterized in both the unloaded in vitro motility assay and in the load-clamped laser trap assay where force:velocity (F:V) relations were obtained. In the motility assay, phosphomimetic replacement (i.e. aspartic acid) reduced the slowing of actin velocity observed in the presence of C0-C3 in proportion to the total number phosphomimetic replacements. Under load, C0-C3 depressed the F:V relationship without any effect on maximal force. Phosphomimetic replacement reversed the depression of F:V by C0-C3 in a graded manner with respect to the total number of replacements. Interestingly, the effect of C0-C3 on F:V was well fitted by a model that assumed C0-C3 acts as an effective viscous load against which myosin must operate. This study suggests that increasing phosphorylation of cMyBP-C incrementally reduces its modulation of actomyosin motion generation providing a tunable mechanism to regulate cardiac function.

Human cardiac myosin binding protein C: structural flexibility within an extended modular architecture

New insights into the modular organization and flexibility of the N-terminal half of human cardiac myosin binding protein C (cMyBP-C) and information on the association state of the full-length protein have been deduced from a combined small-angle X-ray scattering (SAXS) and NMR study. SAXS data show that the first five immunoglobulin domains of cMyBP-C, which include those implicated in interactions with both myosin and actin, remain monodisperse and monomeric in solution and have a highly extended yet distinctively 'bent' modular arrangement that is similar to the giant elastic muscle protein titin. Analyses of the NMR and SAXS data indicate that a proline/alanine-rich linker connecting the cardiac-specific N-terminal C0 domain to the C1 domain provides significant structural flexibility at the N-terminus of the human isoform, while the modular arrangement of domains C1-C2-C3-C4 is relatively fixed. Domain fragments from the C-terminal half of the protein have a propensity to self-associate in vitro, while full-length bacterially expressed cMyBP-C forms flexible extended dimers at micromolar protein concentrations. In summary, our studies reveal that human cMyBP-C combines a distinctive modular architecture with regions of flexibility and that the N-terminal half of the protein is sufficiently extended to span the range of interfilament distances sampled within the dynamic environment of heart muscle. These structural features of cMyBP-C could facilitate its putative role as a molecular switch between actin and myosin and may contribute to modulating the transverse pliancy of the C-zone of the A-band across muscle sarcomeres.

Myosin binding protein-C: a regulator of actomyosin interaction in striated muscle

Myosin-Binding protein-C (MyBP-C) is a family of accessory proteins of striated muscles that contributes to the assembly and stabilization of thick filaments, and regulates the formation of actomyosin cross-bridges, via direct interactions with both thick myosin and thin actin filaments. Three distinct MyBP-C isoforms have been characterized; cardiac, slow skeletal, and fast skeletal. Numerous mutations in the gene for cardiac MyBP-C (cMyBP-C) have been associated with familial hypertrophic cardiomyopathy (FHC) and have led to increased interest in the regulation and roles of the cardiac isoform. This review will summarize our current knowledge on MyBP-C and its role in modulating contractility, focusing on its interactions with both myosin and actin filaments in cardiac and skeletal muscles.

The C0C1 fragment of human cardiac myosin binding protein C has common binding determinants for both actin and myosin

The N-terminal domains of cardiac myosin binding protein C (MyBP-C) play a regulatory role in modulating interactions between myosin and actin during heart muscle contraction. Using NMR spectroscopy and small-angle neutron scattering, we have determined specific details of the interaction between the two-module human C0C1 cMyBP-C fragment and F-actin. The small-angle neutron scattering data show that C0C1 spontaneously polymerizes monomeric actin (G-actin) to form regular assemblies composed of filamentous actin (F-actin) cores decorated by C0C1, similar to what was reported in our earlier four-module mouse cMyBP-C actin study. In addition, NMR titration analyses show large intensity changes for a subset of C0C1 peaks upon addition of G-actin, indicating that human C0C1 interacts specifically with actin and promotes its assembly into filaments. During the NMR titration, peaks corresponding to cardiac-specific C0 domain are the first to be affected, followed by those from the C1 domain. No peak intensity or position changes were detected for peaks arising from the disordered proline/alanine-rich (P/A) linker connecting C0 with C1, despite previous suggestions of its involvement in binding actin. Of considerable interest is the observation that the actin-interaction "hot-spots" within the C0 and C1 domains, revealed in our NMR study, overlap with regions previously identified as binding to the regulatory light chain of myosin and to myosin ΔS2. Our results suggest that C0 and C1 interact with myosin and actin using a common set of binding determinants and therefore support a cMyBP-C switching mechanism between myosin and actin.

Unique single molecule binding of cardiac myosin binding protein-C to actin and phosphorylation-dependent inhibition of actomyosin motility requires 17 amino acids of the motif domain

Cardiac myosin binding protein-C (cMyBP-C) has 11 immunoglobulin or fibronectin-like domains, C0 through C10, which bind sarcomeric proteins, including titin, myosin and actin. Using bacterial expressed mouse N-terminal fragments (C0 through C3) in an in vitro motility assay of myosin-generated actin movement and the laser trap assay to assess single molecule actin-binding capacity, we determined that the first N-terminal 17 amino acids of the cMyBP-C motif (the linker between C1 and C2) contain a strong, stereospecific actin-binding site that depends on positive charge due to a cluster of arginines. Phosphorylation of 4 serines within the motif decreases the fragments' actin-binding capacity and actomyosin inhibition. Using the laser trap assay, we observed individual cMyBP-C fragments transiently binding to a single actin filament with both short (~20 ms) and long (~300 ms) attached lifetimes, similar to that of a known actin-binding protein, α-actinin. These experiments suggest that cMyBP-C N-terminal domains containing the cMyBP-C motif tether actin filaments and provide one mechanism by which cMyBP-C modulates actomyosin motion generation, i.e. by imposing an effective viscous load within the sarcomere.