Extraction, purification, kinetic characterization and immobilization of urease from Bacillus sphaericus MTCC 5100

A novel and sustainable approach for biotransformation of phosphogypsum to calcium carbonate using urease producing Lysinibacillus sphaericus strain GUMP2

Phosphogypsum (CaSO₄) is produced as a waste by-product during phosphoric acid production in the fertilizer industry. Only 15% of worldwide phosphogypsum production is recycled, while 85% is stored in the vicinity of factories as huge piles resulting in environmental and health hazards. An extensively studied biotransformation of phosphogypsum to calcium carbonate or calcite (CaCO₃) using sulfate reducing bacteria (SRBs) is a prolonged process and results in the formation of extremely hazardous H₂S gas. Here we report for the first time a novel approach for biotransformation of phosphogypsum to CaCO₃ using urease producing Lysinibacillus sphaericus strain GUMP2. The strain could effectively transform phosphogypsum to crystalline, bead-shaped CaCO₃ precipitates. In a batch reactor with the PG loading rate of 60 g/L, 100% biotransformation was observed within seven days. After calcite recovery, the ammonium sulfate formed in the supernatant was recovered by precipitation. Urease-producing L. sphaericus strain GUMP2 could be used to remove the hazardous phosphogypsum from the environment by converting it to the industrially useful CaCO₃ and ammonium sulfate, a valuable agricultural fertilizer. This novel and sustainable approach could be a promising solution for the hazardous phosphogypsum in the phosphoric acid industries.

The global research trend on microbially induced carbonate precipitation during 2001-2021: a bibliometric review

Microbially induced carbonate precipitation (MICP) is a remarkable method that creates sustainable cementitious binding material for use in geotechnical/structural engineering and environmental engineering. This is due to the increasing demand for alternative environmentally friendly technologies and materials that result in minimal or zero carbon footprint. In contrast to the previously published literature, through bibliometric analysis, this review paper focuses on the current prospects and future research trends of MICP technology via the Scopus database and VOSviewer analysis. The objective of the study was to determine the annual publications and citations trend, most contributing countries, the leading journals, prolific authors, productive institutions, funding sponsors, trending author keywords, and research directions of MICP. There were a total of 1058 articles published from 2001 to 2021 on MICP. The result demonstrated that the volume of publications is increasing. China, Construction and Building Materials, Satoru Kawasaki, Nanyang Technological University, and the National Natural Science Foundation of China are the leading country, journal, author, institution, and funding sponsor in terms of total publications. Through the co-occurrence analysis of the author keywords, MICP was revealed to be the most frequently used author keyword with 121 occurrences, a total link strength of 213, and 152 links to other author keywords. Furthermore, co-occurrence analysis of text data revealed that researchers are concentrating on four important research areas: precipitation, MICP, compressive strength, and biomineralization. This review can provide information to researchers that can lead to novel ideas and research collaboration or engagement on MICP technology.

Whole cell evaluation and the enzymatic kinetic study of urease from ureolytic bacteria affected by potentially toxic elements

Microbially induced carbonate precipitation (MICP) is a biomineralization process that has various applications in environmental pollution remediation and restoration of a range of building materials. In this study, a ureolytic bacterium, Lysinibacillus sp. GY3, isolated from an E-waste site, was found as a promising catalyst for remediation of heavy metals via the MICP process. This bacterial isolate produced significant amounts of urease and showed a great persistence in immobilization of potentially toxic elements. A reference ureolytic strain, Bacillus megaterium VS1, was selected in order to compare the efficiency of Lysinibacillus sp. GY3. Study on urease localization indicated 80 % more urease activity secreted extracellularly as for Lysinibacillus sp. GY3 compared to B. megaterium VS1. From the investigation on effects of metals on both intra- and extra-cellular urease, it was clear that Lysinibacillus sp. GY3 produced the most stable urease under conditions of metal pressure, especially retaining more than 70 % activity in the presence of 1 g/L Pb²⁺ and Zn²⁺. These results suggest that this isolated microorganism could be promisingly introduced in the MICP process to stabilize complex heavy metal pollutions, with reference to the regulating ability under harsh conditions to stabilize urease activity. This species is so important both for its biological features and environmental impacts. In addition, the present study will bring new insight in the field of metal remediation coupled with enzyme engineered biotechnology.

Immobilized Crosslinked Pectinase Preparation on Porous ZSM-5 Zeolites as Reusable Biocatalysts for Ultra-Efficient Hydrolysis of β-Glycosidic Bonds

In this study, we immobilized pectinase preparation on porous zeolite ZSM-5 as an enzyme carrier. We realized this immobilized enzyme catalyst, pectinase preparation@ZSM-5, via a simple combined strategy involving the van der Waals adsorption of pectinase preparation followed by crosslinking of the adsorbed pectinase preparation with glutaraldehyde over ZSM-5. Conformal pectinase preparation coverage of various ZSM-5 supports was achieved for the as-prepared pectinase preparation@ZSM-5. The porous pectinase preparation@ZSM-5 catalyst exhibited ultra-efficient biocatalytic activity for hydrolyzing the β-glycosidic bonds in the model substrate 4-nitrophenyl β-D-glucopyranoside, with a broad operating temperature range, high thermal stability, and excellent reusability. The relative activity of pectinase preparation@ZSM-5 at a high temperature (70 °C) was nine times higher than that of free pectinase preparation. Using thermal inactivation kinetic analysis based on the Arrhenius law, pectinase preparation@ZSM-5 showed higher activation energy for denaturation (315 kJ mol⁻¹) and a longer half-life (62 min⁻¹) than free pectinase preparation. Moreover, a Michaelis–Menten enzyme kinetic analysis indicated a higher maximal reaction velocity for pectinase preparation@ZSM-5 (0.22 µmol mg⁻¹ min⁻¹). This enhanced reactivity was attributed to the microstructure of the immobilized pectinase preparation@ZSM-5, which offered a heterogeneous reaction system that decreased the substrate–pectinase preparation binding affinity and modulated the kinetic characteristics of the enzyme. Additionally, pectinase preparation@ZSM-5 showed the best ethanol tolerance among all the reported pectinase preparation-immobilized catalysts, and an activity 247% higher than that of free pectinase preparation at a 10% (v/v) ethanol concentration was measured. Furthermore, pectinase preparation@ZSM-5 exhibited potential for practical engineering applications, promoting the hydrolysis of β-glycosidic bonds in baicalin to convert it into baicalein. This was achieved with a 98% conversion rate, i.e., 320% higher than that of the free enzyme.

The Chemical Element Composition of Turmeric Grown in Soil-Climate Conditions of Tashkent Region, Uzbekistan

A mineral fertiliser has positive effects in improving turmeric nutrients, soil enzymes and soil properties. The aim of this research was to study the effect of mineral fertilisers on the content of mineral elements in turmeric rhizome, soil enzymes activity and soil properties in the Tashkent Region, Uzbekistan. For the first time in Uzbekistan, the turmeric rhizome was cultivated to study the mineral elements present in the rhizome. A microplot experiment was conducted with four treatments including T1 (Control), T2 (N₇₅P₅₀K₅₀ kg/ha), T3 (N₁₂₅P₁₀₀K₁₀₀ kg/ha) and T4 (N₁₀₀P₇₅K₇₅ + B₃Zn₆Fe₆ kg/ha) and turmeric rhizome, which were collected for observation along with the soil samples. The analyses indicated that the NPK + BZnFe (100:75:75:3:6:6 kg/ha) treatment significantly improved minerals such as K, Ca, P, Mg and Na contents rhizome as compared to the control without fertiliser. Likewise, the maximum quantity of micronutrient content viz., Fe, Mn, Zn, Cu, Cr and Si was also recorded in turmeric rhizome treated with NPK + BZnFe (125:100:100:3:6:6 kg/ha). It showed an increase in these micronutrients in the rhizome compared to the control, followed by a low rate of NPK (75:50:50 kg/ha). The highest content in terms of total N, P, K content, humus, active phosphorus, potassium, and enzymes activity was also observed in soil with the treatment of mineral fertiliser viz., NPK + BznFe (100:75:75:3:6:6 kg/ha), which enhanced soil nutrient and enzyme activity. The NPK + BznFe (100:75:75:3:6:6 kg/ha) treatment significantly increased the active N content by 40%, total P content by 38% and total K content by 22% in comparison to the control without mineral fertiliser. Overall, it was found that NPK + BznFe (100:75:75:3:6:6 kg/ha) was significantly valuable for enhancing the total nitrogen, phosphorus, and potassium levels in the soil compared to control, which is useful for improving soil health in terms of soil enzyme and soil nutrients. Additionally, the micronutrients in turmeric rhizome were significantly enhanced when using this combination of fertiliser applications [NPK + BznFe (100:75:75:3:6:6 kg/ha)]. Therefore, this present study revealed that the NPK+BznFe (100:75:75:3:6:6 kg/ha) could produce the most significant yield of high-quality turmeric plants and improve soil properties in Uzbek soil–climate conditions.

Recent advancements in urea biosensors for biomedical applications

The quick progress in health care technology as a recurrent measurement of biochemical factors such as blood components leads to advance development and growth in biosensor technology necessary for effectual patient concern. The review wok of authors present a concise information and brief discussion on the development made in the progress of potentiometric, field effect transistor, graphene, electrochemical, optical, polymeric, nanoparticles and nanocomposites based urea biosensors in the past two decades. The work of authors is also centred on different procedures/methods for detection of urea by using amperometric, potentiometric, conductometric and optical processes, where graphene, polymer etc. are utilised as an immobilised material for the fabrication of biosensors. Further, a comparative revision has been accomplished on various procedures of urea analysis using different materials-based biosensors, and it discloses that electrochemical and potentiometric biosensor is the most promise one among all, in terms of rapid response time, extensive shelf life and resourceful design.

Biocompatible magnetic nanoparticles grafted by poly(carboxybetaine acrylamide) for enzyme immobilization

Herein, the zwitterionic material poly (carboxybetaine acrylamide) was grafted onto iron oxide to obtain biocompatible magnetic nanoparticles Fe₃O₄-pCBAA which were employed to immobilize enzymes. The nanocomplxes Fe₃O₄-pCBAA were characterized using scanning electron microscopy (SEM), dynamic light scattering (DLS), zeta potential, Fourier transform-infrared (FT-IR) spectra and energy dispersive X-ray spectrometry (EDX). The urease as a model enzyme was immobilized with the novel supports and the properties of immobilized urease were further investigated in comparison with the free urease counterpart. The immobilized urease exhibited excellent thermodynamic and chemical stability. Particularly, 60% of initial activity was remained after being stored at 70 °C for 2 h while the free urease only remained 30%. Besides, the relative activity of immobilized enzyme was 1.7 times that of free ones after disposed in ethanol and 2-propanol for 2 h, and 7 times in DMF. Moreover, immobilized urease retained >80% of its initial activity after 5 cycles. In addition, the immobilization carrier Fe₃O₄-pCBAA displayed famous biocompatibility, and the immobilized urease performed better in complex biological samples, which were >85% and <60% of its initial activity for the immobilized and dissociative urease, respectively, in 20% and 25% of serum. These results confirm that the nanoparticles Fe₃O₄-pCBAA are biofriendly and efficient supports for enzyme immobilization and potential for practical applications in bio-microenvironments.