Brevibacterium luteolum biosurfactant: Production and structural characterization

Effect of Glycolipids Application Combined with Nitrogen Fertilizer Reduction on Maize Nitrogen Use Efficiency and Yield

Microbial-driven N turnover is important in regulating N fertilizer use efficiency through the secretion of metabolites like glycolipids. Currently, our understanding of the potential of glycolipids to partially reduce N fertilizer use and the effects of glycolipids on crop yield and N use efficiency is still limited. Here, a three-year in situ field experiment was conducted with seven treatments: no fertilization (CK); chemical N, phosphorus and potassium (NPK); NPK plus glycolipids (N+PKT); and PK plus glycolipids with 10% (0.9 N+PKT), 20% (0.8 N+PKT), 30% (0.7 N+PKT), and 100% (PKT) N reduction. Compared with NPK, glycolipids with 0-20% N reduction did not significantly reduce maize yields, and also increased N uptake by 6.26-11.07%, but no significant changes in grain or straw N uptake. The N resorption efficiency under 0.9 N+PKT was significantly greater than that under NPK, while the apparent utilization rates of N fertilizer and partial factor productivity of N under 0.9 N+PKT were significantly greater than those under NPK. Although 0.9 N+PKT led to additional labor and input costs, compared with NPK, it had a greater net economic benefit. Our study demonstrates the potential for using glycolipids in agroecosystem management and provides theoretical support for optimizing fertilization strategies.

Sophorolipid modification enables high reactivity and electron selectivity of nanoscale zerovalent iron toward hexavalent chromium

Nanoscale zero-valent iron is considered to be a promising nanostructure for environmental remediation, while increasing the electron selectivity of nanoscale zerovalent iron (nZVI) during target contaminant removal is still a challenge (electron selectivity, defined as the percentage of electrons transferred to the target contaminants over the number of electrons donated by nZVI). In this study, the strategy for increasing the reactivity and electron selectivity of nZVI via sophorolipid (SL-nZVI) modification was proposed. The results showed that the removal efficiency and electron selectivity of SL-nZVI toward Cr(VI) was 99.99% and 56.30%, which was higher than that of nZVI (61.16%, 25.91%). Meanwhile, the particles were well characterized and the mechanism for enhanced reactivity and electron selectivity was investigated. Specially, both the morphology and BET specific surface area characterization suggested that stability against aggregation was higher in SL-nZVI nanoparticles than in nZVI. Besides, X-ray photoelectron spectroscopy (XPS), Tafel polarization curves, and Electrochemical impedance spectroscopy also indicated that the introduction of sophorolipid successfully prevent the nanoparticles from oxidation and benefit the electron transferring. In addition, a water contact angle test revealed that SL-nZVI nanoparticles were less hydrophilic (contact angle = 34.8°) than nZVI (contact angle = 23.9°). Therefore, in terms of reactivity, sophorolipid modification inhibited the aggregation of the nanoparticles and enhanced the electrical conductivity. For electron selectivity, the introduction of sophorolipid not only benefited Cr(VI) adsorption and the electron transfer from Fe⁰ to the surface-adsorbed Cr(VI) that followed but also reduced the possibility of side reactions between Fe⁰ and H₂O. This study demonstrates that the introduction of sophorolipid is an effective strategy for developing a highly efficient nZVI-based nanocomposite system and highlights the potential role of sophorolipid in improving the electron selectivity of nZVI.

[Induced biosynthesis of fengycin and surfactin in a strain of Bacillus amyloliquefaciens with oomyceticidal activity on zoospores of Phytophthora capsici]

A potential alternative to the use of chemical products with oomyceticidal action for the control of Phytophthora capsici in vegetables is the use of antimicrobial metabolites, biosynthesized in Bacillus species. The objective of this study was to induce the biosynthesis of lipopeptides in Bacillus amyloliquefaciens KX953161.1 by using glutamic acid, iron, cellulose, chitin, or inactive Colletotrichum spp. cells. The in vitro oomyceticidal effect of the bacterial lipopeptides on zoospores of Phytophthora capsici was evaluated. The lipopeptides identified and quantified in the crude extracts by high performance thin layer chromatography (HPTLC) were fengycin and surfactin. The bacterial culture with inactive fungal cells yielded the greatest biosynthesis of lipopeptides, at 1847.02± 11.8 and 2563.45± 18.4 μg/ml of fengycin and surfactin, respectively and the treatments that obtained lower production of these lipopeptides, were those to which iron and cellulose were added with 608.05 ± 22.6 and 903.74± 22.1; 563.31± 11.9 and 936.96± 41.1 μg/ml for fengicin and surfactin, respectively. The lipopeptide extracted showed 100% germination inhibition on zoospores of P. capsici, revealing encystment, malformations in the germ tube and cellular degradation. Lipopeptides have the potential to control P. capsici; however, the biosynthesis of these lipopeptides requires further study to determine their biological mode of action and optimize lipopeptide performance and profile.

A review on new aspects of lipopeptide biosurfactant: Types, production, properties and its application in the bioremediation process

Nowadays, the worldwide search regarding renewable products from natural resources is increasing due to the toxicity of chemical counterparts. Biosurfactants are surface-active compounds that contain several physiological functions that are used in industries like food, pharmaceutical, petroleum and agriculture. Microbial lipopeptides have gained more attention among the researchers for their low toxicity, efficient action and good biodegradability when compared with other surfactants. Because of their versatile properties, lipopeptide compounds are utilized in the remediation of organic and inorganic pollutants. This review presented a depth evaluation of lipopeptide surfactants in the bioremediation process and their properties to maintain a sustainable environment. Lipopeptide can acts as a replacement to chemical surfactants only if they meet industrial-scale production and low-cost substrates. This review also demonstrated the production of a lipopeptide biosurfactant from a low-cost substrate and depicted plausible techniques to manage the substrate residues to determine its ability in the different applications particularly in the bioremediation process.

Multi-Scale Biosurfactant Production by Bacillus subtilis Using Tuna Fish Waste as Substrate

As one of the most effective biosurfactants reported to date, lipopeptides exhibit attractive surface and biological activities and have the great potential to serve as biocatalysts. Low yield, high cost of production, and purification hinder the large-scale applications of lipopeptides. Utilization of waste materials as low-cost substrates for the growth of biosurfactant producers has emerged as a feasible solution for economical biosurfactant production. In this study, fish peptone was generated through enzyme hydrolyzation of smashed tuna (Katsuwonus pelamis). Biosurfactant (mainly surfactin) production by Bacillus subtilis ATCC 21332 was further evaluated and optimized using the generated fish peptone as a comprehensive substrate. The optimized production conduction was continuously assessed in a 7 L batch-scale and 100 L pilot-scale fermenter, exploring the possibility for a large-scale surfactin production. The results showed that Bacillus subtilis ATCC 21332 could effectively use the fish waste peptones for surfactin production. The highest surfactin productivity achieved in the pilot-scale experiments was 274 mg/L. The experimental results shed light on the further production of surfactins at scales using fish wastes as an economical substrate.

Production of biosurfactant by Bacillus subtilis RSL-2 isolated from sludge and biosurfactant mediated degradation of oil

This study aims to unveil the effect of biosurfactant as stimulant in crude oil bioremediation. Isolated oil-degrading strain, B. subtilis RSL 2 was optimized for the maximum oil degradation and biosurfactant production using Response surface methodology. The produced biosurfactant was characterized and investigated for its effect on microbial oil degradation in two modes (a) sequential and (b) simultaneous. The strain produced 3.5 g/L of biosurfactant at pH 4.0, 25 °C, using 1 g/L crude oil as the only C-source in 7 days, which was characterized as lipopeptide with a critical micelle concentration (CMC) of 0.5 g/L. The biosurfactant improved surface wettability of a hydrophobic substrate i.e. increased surface energy from 30 ± 1 to 35 ± 1 mJ/m². Further, the simultaneous feed of biosurfactant at 0.5 CMC enhanced oil biodegradation (72%) and biosurfactant production (5.2 g/L) by about 1.6 times than the sequential mode due to improvement in mobilization of oil thus making it more bioavailable.

Simultaneous profiling and cultivation of the skin microbiome of healthy young adult skin for the development of therapeutic agents

Background

Studies on the impact of the skin microbiota on human health have been gaining more attention. Bacteria are associated with various diseases, although certain strains of bacteria, which are known as probiotics, are considered beneficial. Mixtures of several bacteria (bacterial cocktail) isolated from targeted organs have shown promising modulatory activities for use in skin therapeutics. The objectives of this study were to determine and identify the microbial communities on the skin that can potentially be used as probiotics, as determined by bacterial isolation and cultivation, followed by next-generation sequencing (NGS).

Results

Samples were collected by swabbing on forehead and cheek skin. Genomic DNA from bacterial swab samples were directly extracted to be further processed into NGS. Cultivation of skin bacteria was carried out in subsequent medium. Thus, around twenty bacterial isolates with different characteristics were selected and identified by both culture-based method and 16sRNA sequencing. We found that Actinobacteria and Firmicutes are the most abundant phylum present on the skin as presented by NGS data, which constitute to 67% and 28.59% of the whole bacterial population, consecutively. However, Staphylococcus hominis, Staphylococcus warneri, and Micrococcus luteus (AN MK968325.1; AN MK968315.1; and MK968318.1 respectively) were able to be obtained in the samples of cultivable, and could be potentially developed as probiotics in skin microbiome therapeutic as well as for postbiotic formulation.

Conclusion

Skin microbiome is considered to provide several probiotics for skin therapeutic. However, some opportunistic pathogens were discovered in this study population. Thus, the promising formula of bacterial cocktail for skin microbiome therapeutic must be thoroughly elucidated to avoid unwanted species. Our study is the first human skin microbiome profile of Indonesia resulted from a Next Generation Sequencing as an effort to show a representative of tropical country profile.

Marine Biosurfactants: Biosynthesis, Structural Diversity and Biotechnological Applications

Biosurfactants are amphiphilic secondary metabolites produced by microorganisms. Marine bacteria have recently emerged as a rich source for these natural products which exhibit surface-active properties, making them useful for diverse applications such as detergents, wetting and foaming agents, solubilisers, emulsifiers and dispersants. Although precise structural data are often lacking, the already available information deduced from biochemical analyses and genome sequences of marine microbes indicates a high structural diversity including a broad spectrum of fatty acid derivatives, lipoamino acids, lipopeptides and glycolipids. This review aims to summarise biosyntheses and structures with an emphasis on low molecular weight biosurfactants produced by marine microorganisms and describes various biotechnological applications with special emphasis on their role in the bioremediation of oil-contaminated environments. Furthermore, novel exploitation strategies are suggested in an attempt to extend the existing biosurfactant portfolio.