Highly sensitive electrochemical aptasensor for Glypican-3 based on reduced graphene oxide-hemin nanocomposites modified on screen-printed electrode surface

Label-free determination of glypican-3 using PtPd@H-rGO nanocomposites decorated light-addressable potentiometric sensor

Glypican-3 (GPC3) is exclusively overexpressed in most Hepatocellular carcinoma (HCC) tissue but not in normal liver tissue, making it a promising biomarker for the precise detection of HCC. In this paper, a label-free light-addressable potentiometric sensor (LAPS) decorated by platinumpalladium-hemin-reduced graphene oxide nanocomposites (PtPd@H-rGO NCs) was constructed for determination of GPC3. The GPC3 aptamer (GPC3Apt) and PtPd@H-rGO NCs were modified on the surface of silicon-based LAPS chip to build sensitive unit of LAPS system. A readout photocurrent elicited from a modulated light source, registers the localized surface potential change. When a bias voltage is provided to the LAPS system, the GPC3-GPC3Apt complexes formed by the specific reaction between GPC3 and GPC3Apt at the sensing interface can cause the sensitive membrane surface potential to change, resulting in the photocurrent-voltage (I-V) curves generate a corresponding offset response. Therefore GPC3 concentration can be determined by monitoring the potential shifts (△V). Under optimal conditions, the potential shift is linearly related to the concentration of GPC3 in the range of 0.001-3.00 μg/mL with the limit of detection (LOD) of 0.0001 μg/mL. The LAPS has a good analytical performance with good specificity, reproducibility and stability, and can be used for the detection of GPC3 in actual serum samples, which provides a broad application prospect for the combined application of LAPS and aptamers in biooassay.

Glycosaminoglycans, Instructive Biomolecules That Regulate Cellular Activity and Synaptic Neuronal Control of Specific Tissue Functional Properties

Glycosaminoglycans (GAGs) are a diverse family of ancient biomolecules that evolved over millennia as key components in the glycocalyx that surrounds all cells. GAGs have molecular recognition and cell instructive properties when attached to cell surface and extracellular matrix (ECM) proteoglycans (PGs), which act as effector molecules that regulate cellular behavior. The perception of mechanical cues which arise from perturbations in the ECM microenvironment allow the cell to undertake appropriate biosynthetic responses to maintain ECM composition and tissue function. ECM PGs substituted with GAGs provide structural support to weight-bearing tissues and an ability to withstand shear forces in some tissue contexts. This review outlines the structural complexity of GAGs and the diverse functional properties they convey to cellular and ECM PGs. PGs have important roles in cartilaginous weight-bearing tissues and fibrocartilages subject to tension and high shear forces and also have important roles in vascular and neural tissues. Specific PGs have roles in synaptic stabilization and convey specificity and plasticity in the regulation of neurophysiological responses in the CNS/PNS that control tissue function. A better understanding of GAG instructional roles over cellular behavior may be insightful for the development of GAG-based biotherapeutics designed to treat tissue dysfunction in disease processes and in novel tissue repair strategies following trauma. GAGs have a significant level of sophistication over the control of cellular behavior in many tissue contexts, which needs to be fully deciphered in order to achieve a useful therapeutic product. GAG biotherapeutics offers exciting opportunities in the modern glycomics arena.

Research progress of nanoparticles in diagnosis and treatment of hepatocellular carcinoma

Hepatocellular carcinoma (HCC) is among the most common malignant liver tumors. Despite progress in anticancer drugs and surgical approaches, early detection of HCC remains challenging, often leading to late-stage diagnosis where rapid disease progression precludes surgical intervention, leaving chemotherapy as the only option. However, the systemic toxicity, low bioavailability, and significant adverse effects of chemotherapy drugs often lead to resistance, rendering treatments ineffective for many patients. This article outlines how nanoparticles, following functional modification, offer high sensitivity, reduced drug toxicity, and extended duration of action, enabling precise targeting of drugs to HCC tissues. Combined with other therapeutic modalities and imaging techniques, this significantly enhances the diagnosis, treatment, and long-term prognosis of HCC. The advent of nanomedicine provides new methodologies and strategies for the precise diagnosis and integrated treatment of HCC.

Recent Advances in Biosensor Technology for Early-Stage Detection of Hepatocellular Carcinoma-Specific Biomarkers: An Overview

Hepatocellular carcinoma is currently the most common malignancy of the liver. It typically occurs due to a series of oncogenic mutations that lead to aberrant cell replication. Most commonly, hepatocellular carcinoma (HCC) occurs as a result of pre-occurring liver diseases, such as hepatitis and cirrhosis. Given its aggressive nature and poor prognosis, the early screening and diagnosis of HCC are crucial. However, due to its plethora of underlying risk factors and pathophysiologies, patient presentation often varies in the early stages, with many patients presenting with few, if any, specific symptoms in the early stages. Conventionally, screening and diagnosis are performed through radiological examination, with diagnosis confirmed by biopsy. Imaging modalities tend to be limited by their requirement of large, expensive equipment; time-consuming operation; and a lack of accurate diagnosis, whereas a biopsy's invasive nature makes it unappealing for repetitive use. Recently, biosensors have gained attention for their potential to detect numerous conditions rapidly, cheaply, accurately, and without complex equipment and training. Through their sensing platforms, they aim to detect various biomarkers, such as nucleic acids, proteins, and even whole cells extracted by a liquid biopsy. Numerous biosensors have been developed that may detect HCC in its early stages. We discuss the recent updates in biosensing technology, highlighting its competitive potential compared to conventional methodology and its prospects as a tool for screening and diagnosis.

Sandwich-type supersensitive electrochemical aptasensor of glypican-3 based on PrGO-Hemin-PdNP and AuNP@PoPD

A new sandwich-type electrochemical biosensing platform was developed by gold @polyphthalenediamine nanohybrids (AuNP@PoPD) as the sensing platform and phosphorus doped reduced graphene oxide-hemin-palladium nanoparticles (PrGO-Hemin-PdNP) as the signal amplifier for phosphatidylinositol proteoglycan 3 (GPC3). AuNP@PoPD, co-electrodeposited into the screen printed electrode with high conductivity and stability, is dedicated to assembling the primary GPC3 aptamer (GPC3Apt). The second GPC3Apt immobilized on the high conductivity and large surface area of PrGO-Hemin-PdNP was utilized as an electrochemical signal reporter by hemin oxidation (PrGO-Hemin-PdNP-GPC3Apt). In the range 0.001-10.0 ng/mL, the hemin oxidation current signal of the electrochemical aptasensor increased log-linearly with the concentration of GPC3, the lowest detection limit was 0.13 pg/mL, and the sensitivity was 2.073 μA/μM/cm2. The aptasensor exhibited good sensing performance in a human serum sample with the relative error of 4.31-8.07%. The sandwich sensor showed good selectivity and stability for detection GPC3 in human serum samples, providing a new efficient and sensitive method for detecting HCC markers.

Current methods for the detection of glypican-3

Glypican-3 (GPC3) is a heparan sulfate proteoglycan (HSPG) that binds to the cell membrane via glycosylphosphatidylinositol (GPI), widely expressed in human embryos, and is undetectable in healthy adult liver but overexpressed in human hepatocellular carcinoma (HCC). Therefore, accurate and sensitive detection of GPC3 is critical for disease diagnosis. In recent years, a series of methods have been developed for the highly sensitive detection of GPC3, but there is a lack of reviews on recent advances in GPC3-related assays. In this review, we provide the recent advances in GPC3 detection and GPC3 concentration detection, mainly in terms of various optical sensor-based assays and electrochemical assays, and also provide new insights into the challenges and future directions of the field.

Exploiting targeted nanomedicine for surveillance, diagnosis, and treatment of hepatocellular carcinoma

Hepatocellular carcinoma (HCC) is one of the cancers that has the highest morbidity and mortality rates. In clinical practice, there are still many limitations in surveilling, diagnosing, and treating HCC, such as the poor detection of early HCC, the frequent post-surgery recurrence, the low local tumor control rate, the therapy resistance and side effects. Therefore, improved, or innovative modalities are urgently required for early diagnosis as well as refined and effective management. In recent years, nanotechnology research in the field of HCC has received great attention, with various aspects of diagnosis and treatment including biomarkers, ultrasound, diagnostic imaging, intraoperative imaging, ablation, transarterial chemoembolization, radiotherapy, and systemic therapy. Different from previous reviews that discussed from the perspective of nanoparticles' structure, design and function, this review systematically summarizes the methods and limitations of diagnosing and treating HCC in clinical guidelines and practices, as well as nanomedicine applications. Nanomedicine can overcome the limitations to improve diagnosis accuracy and therapeutic effect via enhancement of targeting, biocompatibility, bioavailability, controlled releasing, and combination of different clinical treatment modalities. Through an in-depth understanding of the logic of nanotechnology to conquer clinical limitations, the main research directions of nanotechnology in HCC are sorted out in this review. It is anticipated that nanomedicine will play a significant role in the future clinical practices of HCC.

Recent advances in electrochemical nanomaterial-based aptasensors for the detection of cancer biomarkers

New technologies have provided suitable tools for rapid diagnosis of cancer which can reduce treatment costs and even increase patients' survival rates. Recently, the development of electrochemical aptamer-based nanobiosensors has raised great hopes for early, sensitive, selective, and low-cost cancer diagnosis. Here, we reviewed the flagged recent research (2021-2023) developed as a series of biosensors equipped with nanomaterials and aptamer sequences (nanoaptasensors) to diagnose/prognosis of various types of cancers. Equipping these aptasensors with nanomaterials and using advanced biomolecular technologies have provided specified biosensing interfaces for more optimal and reliable detection of cancer biomarkers. The primary intention of this review was to present and categorize the latest innovations used in the design of these diagnostic tools, including the hottest surface modifications and assembly of sensing bioplatforms considering diagnostic mechanisms. The main classification is based on applying various nanomaterials and sub-classifications considered based on the type of analyte and other vital features. This review may help design subsequent electrochemical aptasensors. Likewise, the up-to-date status, remaining limitations, and possible paths for translating aptasensors to clinical cancer assay tools can be clarified.

Carbon Nanomaterials-Based Screen-Printed Electrodes for Sensing Applications

Electrochemical sensors consisting of screen-printed electrodes (SPEs) are recurrent devices in the recent literature for applications in different fields of interest and contribute to the expanding electroanalytical chemistry field. This is due to inherent characteristics that can be better (or only) achieved with the use of SPEs, including miniaturization, cost reduction, lower sample consumption, compatibility with portable equipment, and disposability. SPEs are also quite versatile; they can be manufactured using different formulations of conductive inks and substrates, and are of varied designs. Naturally, the analytical performance of SPEs is directly affected by the quality of the material used for printing and modifying the electrodes. In this sense, the most varied carbon nanomaterials have been explored for the preparation and modification of SPEs, providing devices with an enhanced electrochemical response and greater sensitivity, in addition to functionalized surfaces that can immobilize biological agents for the manufacture of biosensors. Considering the relevance and timeliness of the topic, this review aimed to provide an overview of the current scenario of the use of carbonaceous nanomaterials in the context of making electrochemical SPE sensors, from which different approaches will be presented, exploring materials traditionally investigated in electrochemistry, such as graphene, carbon nanotubes, carbon black, and those more recently investigated for this (carbon quantum dots, graphitic carbon nitride, and biochar). Perspectives on the use and expansion of these devices are also considered.

An electrochemical immunosensor for the detection of Glypican-3 based on enzymatic ferrocene-tyramine deposition reaction

An ultrasensitive electrochemical immunosensor based on signal amplification of the deposition of the electroactive ferrocene-tyramine (Fc-Tyr) molecule, catalyzed by horseradish peroxidase (HRP), was constructed for the detection of the liver cancer marker Glypican-3 (GPC3). Functional electroactive molecule Fc-Tyr is reported to exhibit both the enzymatic cascade catalytic activity of tyramine signal amplification (TSA) and the excellent redox properties of ferrocene. In terms of design, the low matrix effects inherent in using the magnetic bead platforms, a quasi-homogeneous system, allowed capturing the target protein GPC3 without sample pretreatment, and loading HRP to trigger the TSA, which induced a large amount of Fc-Tyr deposited on the electrode surface layer by layer as a signal probe for the detection of GPC3. The concept of Fc-Tyr as an electroactive label was validated, GPC3 biosensor exhibited high selectivity and sensitivity to GPC3 in the range of 0.1 ng mL^-1-1 μg mL^-1. Finally, the sensor was used simultaneously with ELISA to assess GPC3 levels in the serum of clinical liver cancer patients, and the results showed consistency, with a recovery of 98.33-105.35% and a relative standard deviation (RSD) of 4.38-8.18%, providing a theoretical basis for achieving portable, rapid and point of care testing (POCT) of tumor markers.

H-rGO-Pd NPs Nanozyme Enhanced Silver Deposition Strategy for Electrochemical Detection of Glypican-3

Glypican-3 (GPC3), as an emerging biomarker, has been shown to be beneficial for the early diagnosis and treatment of hepatocellular carcinoma (HCC). In this study, an ultrasensitive electrochemical biosensor for GPC3 detection has been constructed based on the hemin-reduced graphene oxide-palladium nanoparticles (H-rGO-Pd NPs) nanozyme-enhanced silver deposition signal amplification strategy. When GPC3 specifically interacted with GPC3 antibody (GPC3_Ab) and GPC3 aptamer (GPC3_Apt), an "H-rGO-Pd NPs-GPC3_Apt/GPC3/GPC3_Ab" sandwich complex was formed with peroxidase-like properties which enhanced H₂O₂ to reduce the silver (Ag) ions in solution to metallic Ag, resulting in the deposition of silver nanoparticles (Ag NPs) on the surface of the biosensor. The amount of deposited Ag, which was derived from the amount of GPC3, was quantified by the differential pulse voltammetry (DPV) method. Under ideal circumstances, the response value was linearly correlated with GPC3 concentration at 10.0-100.0 μg/mL with R² of 0.9715. When the GPC3 concentration was in the range from 0.01 to 10.0 μg/mL, the response value was logarithmically linear with the GPC3 concentration with R² of 0.9941. The limit of detection was 3.30 ng/mL at a signal-to-noise ratio of three and the sensitivity was 1.535 μAμM^-1cm^-2. Furthermore, the electrochemical biosensor detected the GPC3 level in actual serum samples with good recoveries (103.78-106.52%) and satisfactory relative standard deviations (RSDs) (1.89-8.81%), which confirmed the applicability of the sensor in practical applications. This study provides a new analytical method for measuring the level of GPC3 in the early diagnosis of HCC.

Colorimetric biosensor for visual determination of Golgi protein 73 based on reduced graphene oxide-carboxymethyl chitosan-Hemin/platinum@palladium nanozyme with peroxidase-like activity

A Golgi protein 73 (GP73) colorimetric biosensor based on the reduced graphene oxide-carboxymethyl chitosan-hemin/platinum@palladium nanoparticles (RGO-CMCS-Hemin/Pt@Pd NPs) with peroxidase-like activity was constructed. The RGO-CMCS-Hemin/Pt@Pd NPs with high peroxidase-like activity were successfully synthesized under mild conditions. Then, the aminylated GP73 aptamer (Apt) was bound to the RGO-CMCS-Hemin/Pt@Pd NPs to form the recognition probe. Another unmodified GP73 aptamer (AptI) was served as the capture probe. In the presence of target GP73, the capture probe and the recognition probe specifically bind to GP73 and form a RGO-CMCS-Hemin/Pt@Pd NP-Apt/GP73/AptI sandwich-type structure, which can oxidase the colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxTMB in the presence of H₂O₂. GP73 detection was achieved by measuring the peak UV absorption at 652 nm. Under the optimum conditions, the GP73 concentration was linearly related to the absorbance intensity in the range 10.0-110.0 ng/mL, and the limit of detection (LOD) was 4.7 ng/mL. The proposed colorimetric biosensor was successfully applied to detect GP73 in spiked human serum samples with recoveries of 98.2-107.0% and RSDs of 1.90-5.44%, demonstrating the excellent potential for highly sensitive GP73 detection in clinical detection. A colorimetric biosensor for visual determination of GP73 based on RGO-CMCS-Hemin/Pt@Pd NPs nanozyme with peroxidase-like activity was designed. The GP73 biosensor responses linearly from 10.0-110.0 ng/mL with LOD of 4.7 ng/mL, and shows acceptable specificity and good recovery.

Screen-printed electrode-based biosensors modified with functional nucleic acid probes and their applications in this pandemic age: a review

Electrochemical methodology has probably been the most used sensing platform in the past few years as they provide superior advantages. In particular, screen-printed electrode (SPE)-based sensing applications stand out as they provide extraordinary miniaturized but robust and user-friendly detection system. In this context, we are focusing on the modification of SPE with functional nucleic acid probes and nanostructures to improve the electrochemical detection performance in versatile sensing applications, particularly in the fight against the COVID-19 pandemic. Aptamers are immobilized on the electrode surface to detect non-nucleic acid targets and complementary probes to recognize and capture nucleic acid targets. In a step further, SPE-based biosensors with the modification of self-assembled DNA nanostructures are emphasized as they offer great potential for the interface engineering of the electrode surface and promote the excellent performance of various interface reactions. By equipping with a portable potentiostat and a smartphone monitoring device, the realization of this SPE-based miniaturized diagnostic system for the further requirement of fast and POC detection is revealed. Finally, more novel and excellent works are previewed and future perspectives in this field are mentioned.

Nanozyme-mediated cascade reaction system for electrochemical detection of 1,5-anhydroglucitol

Diabetes is one of metabolic diseases affecting major human health. The early diagnosis and treatment of diabetes have significant benefits. 1,5-anhydroglucitol (1,5-AG) accurately reflects a patient's average blood glucose level for the past 3-7 days and becomes a promising marker for real-time detection of diabetes. In this study, a novel biosensor for determination 1,5-AG is constructed using reduce graphene oxide-carboxymethylated chitosan-hemin@platinum nanocomposites (rGO-CMC-H@Pt NCs) nanozyme and pyranose oxidase (PROD) enzyme as the electrochemical biosensing platform. The rGO-CMC-H@Pt NCs nanozyme has good electro-conductibility, high specific surface area, and admirable peroxide-like catalysis effect to enhance the electrochemical response. 1,5-AG is catalyzed by PROD and produces hydrogen peroxide (H₂O₂), which in turn can be decomposed by rGO-CMC-H@Pt NCs and produce a current signal recorded by differential pulse voltammetry (DPV) technique. Under optimal conditions, the response currents have a linear relationship in the 1,5-AG concentration of 0.1-2.0 mg/mL with R² of 0.9869. The sensitivity is 2.1895 μA/μg·mL^-1 and the limit of detection (LOD) is 38.2 μg/mL (S/N = 3). In addition, the specificity, reproducibility, stability and recovery (94.5-107.6%) of 1,5-AG biosensors all exhibit good performance. Therefore, the designed 1,5-AG biosensor has a good effect and can be used for the diagnosis of diabetes.

Nanotechnology in the Diagnostic and Therapy of Hepatocellular Carcinoma

Hepatocellular carcinoma is the most common liver malignancy and is among the top five most common cancers. Despite the progress of surgery and chemotherapy, the results are often disappointing, in part due to chemoresistance. This type of tumor has special characteristics that allow the improvement of diagnostic and treatment techniques used in clinical practice, by combining nanotechnology. This article presents a brief review of the literature focused on nano-conditioned diagnostic methods, targeted therapy, and therapeutic implications for the pathology of hepatocellular carcinoma. Within each subdomain, several modern technologies with significant impact were highlighted: serological, imaging, or histopathological diagnosis; intraoperative detection; carrier-type nano-conditioned therapy, thermal ablation, and gene therapy. The prospects offered by nanomedicine will strengthen the hope of more efficient diagnoses and therapies in the future.

A fluorescence aptasensor based on GSH@GQDs and RGO for the detection of Glypican-3

Glypican-3 (GPC3), a heparin sulfate proteoglycan, is a potential diagnostic and therapeutic target for hepatocellular carcinoma. In this paper, a novel fluorescent aptasensor for GPC3 detection is constructed via glutathione@graphene quantum dots-labeled GPC3 aptamer (GSH@GQDs-GPC3_Apt) as a fluorescence probe. First, GSH@GQDs is screened out with higher fluorescence intensity, which emits bright blue fluorescence under ultraviolet light. Then, the fluorescence-labeled GSH@GQDs-GPC3_Apt probe is formed by the combination of amination GPC3_Apt and GSH@GQDs using EDC/NHS coupled reaction. Under hydrogen bond and π-π interaction/stacking, the fluorescence of GSH@GQDs-GPC3_Apt could be quenched by reductive graphene oxide (RGO) with the help of the photoinduced electron transfer and the fluorescence resonance energy transfer mechanism. In the presence of GPC3, the GSH@GQDs-GPC3_Apt specifically recognizes and binds to GPC3, giving rise to the change of secondary structure of GPC3_Apt to form the GPC3/GPC3_Apt-GSH@GQDs complex, which would lead to the disintegration of the GSH@GQDs-GPC3_Apt-RGO compound. Therefore, the energy transfer process is blocked and the fluorescence intensity is restored, enabling a highly sensitive response to GPC3. When the concentration of GPC3 is from 5.0 ng/mL to 150.0 ng/mL, the fluorescence recovery rate is well linearly related to GPC3 concentration with the limit of detection of 2.395 ng/mL (S/N = 3). This strategy shows recoveries from 98.31% to 101.89% in human serum samples and provides simple, fast and cheap analysis of GPC3, which suggests that it has great potential applications in clinical diagnosis for hepatocellular carcinoma.

Aptamers and New Bioreceptors for the Electrochemical Detection of Biomarkers Expressed in Hepatocellular Carcinoma

Hepatocellular carcinoma is a malignancy associated with high mortality and increasing incidence. Early detection of this disease could help increase survival and overall patient benefit. Non-invasive strategies for the diagnosis of this medical condition are of utmost importance. In this scope, the detection of hepatocellular carcinoma biomarkers could provide a useful diagnostic tool. Aptamers represent as short, single-stranded DNAs or RNAs that can specifically bind selected analytes, and also as pseudo-biorecognition elements that can be employed for electrode functionalization. Also, other types of DNA sequences can be used for the construction of DNA-based biosensors applied for the quantification of hepatocellular carcinoma biomarkers. Herein, we will be analyzing recent examples of aptasensors and DNA biosensors for the detection of hepatocellular carcinoma biomarkers like micro-RNAs, long non-coding RNAs, exosomes, circulating tumor cells and proteins. The literature data is discussed comparatively in a critical manner highlighting the advantages of using electrochemical biosensors in diagnosis, as well as the use of nanomaterials and biocomponents in the functionalization of electrodes for improved sensitivity and selectivity.

A highly sensitive electrochemical aptasensor for cocaine detection based on CRISPR-Cas12a and terminal deoxynucleotidyl transferase as signal amplifiers

Cocaine is one of the mainly used illegal drugs in the world. Using the signal amplification elements of terminal deoxynucleotidyl transferase (TdT) and CRISPR-Cas12a, a highly sensitive and simple electrochemical aptasensor was introduced for cocaine quantification. When, no cocaine existed in the sample, the 3'-end of complementary strand of aptamer (CS) was extended by TdT, leading to the activation of CRISPR-Cas12a and remaining of very short oligonucleotides on the working electrode. So, the current signal was remarkably promoted. With the presence of cocaine, CS left the electrode surface. Thus, nothing changed following the incubation of TdT and CRISPR-Cas12a and the Aptamer/Cocaine complex presented on the electrode. Consequently, the [Fe(CN)₆]^3-/4- could not freely reach the electrode surface and the signal response was weak. Under optimal situations, the biosensor revealed a wide linear relation from 40 pM to 150 nM with detection limit of 15 pM for cocaine. The sensitivity of the analytical system was comparable and even better than other reported methods for cocaine detection. The designed method displayed excellent cocaine selectivity. The aptasensor could work well for cocaine assay in serum samples. So, the aptasensor is expected to be an efficient analytical method with broad applications in the determination of diverse analytes.

A label-free electrochemical aptasensor based on platinum@palladium nanoparticles decorated with hemin-reduced graphene oxide as a signal amplifier for glypican-3 determination

An electrochemical aptasensor for highly sensitive detection of glypican-3 has been developed using the GPC3 aptamer as the biorecognition probe and H-rGO-Pt@Pd NPs as an electroactive reagent.

2D Materials-Based Aptamer Biosensors: Present Status and Way Forward

Current advances in constructing functional nanomaterials and elegantly designed nanostructures have opened up new possibilities for the fabrication of viable field biosensors. Two-dimensional materials (2DMs) have fascinated much attention due to their chemical, optical, physicochemical, and electronic properties. They are ultrathin nanomaterials with unique properties such as high surface-to-volume ratio, surface charge, shape, high anisotropy, and adjustable chemical functionality. 2DMs such as graphene-based 2D materials, Silicate clays, layered double hydroxides (LDHs), MXenes, transition metal dichalcogenides (TMDs), and transition metal oxides (TMOs) offer intensified physicochemical and biological functionality and have proven to be very promising candidates for biological applications and technologies. 2DMs have a multivalent structure that can easily bind to single-stranded DNA/RNA (aptamers) through covalent, non-covalent, hydrogen bond, and π-stacking interactions, whereas aptamers have a small size, excellent chemical stability, and low immunogenicity with high affinity and specificity. This review discussed the potential of various 2D material-based aptasensor for diagnostic applications, e.g., protein detection, environmental monitoring, pathogens detection, etc.

1,5-anhydroglucitol biosensor based on light-addressable potentiometric sensor with RGO-CS-Fc/Au NPs nanohybrids

In this paper, a novel silicon-based light-addressable potentiometric sensor (LAPS) has been designed for the detection of 1,5-anhydroglucitol (1,5-AG) in human serum. Reduced graphene oxide-chitosan-ferrocene (RGO-CS-Fc)/AuNPs nanohybrids and pyranose oxidase (PROD) enzyme is used to fabricate biological sensitive membrane unit by layer-by-layer assembly technology. When a bias voltage is provided to the LAPS system, the catalytic oxidation reaction between 1,5-AG and PROD to produce H₂O₂. The by-product H₂O₂ can oxidize Fc(Fe²⁺) ions in RGO-CS-Fc nanohybrids into Fc(Fe³⁺) ions, which cause the potential of the sensitive membrane surface to change and the potential shift of I-V curve will generate a corresponding offset response. Under the optimal conditions, the potential shift of the LAPS is linearly related to the concentration of 1,5-AG at 10 µg·mL^-1 -350 µg·mL^-1 with the correlation coefficient of 0.97414. The sensitivity is 0.44273 mV/µg·mL^-1 and the lowest detection limit is 10 µg·mL^-1. In addition, the biosensor showed good specificity, acceptable stability and satisfactory recovery rates (91.28%-107.66%), which would be a potential testing methods in actual clinical samples.

A three-dimensional hydrogel-modified indium tin oxide electrode with enhanced performance for in situ electrochemical detection of extracellular H2O2

Two different electrochemical sensors (Hemin-G4/Au/GCE and Hemin-G4/Au/ITO) were developed and applied to explore the electrocatalytic capacity of H₂O₂ reduction. Due to the excellent catalytic activity of Hemin-G4 and high conductivity of gold nanoparticles, both electrodes show excellent electrochemical performances towards H₂O₂ with a low LOD (0.67 μM for Hemin-G4/Au/GCE and 0.65 μM for Hemin-G4/Au/ITO), rapid response (<4 s), and high selectivity and sensitivity (314.33 μA mM^-1 cm^-2 for Hemin-G4/Au/GCE and 322.22 μA mM^-1 cm^-2 for Hemin-G4/Au/ITO). The two electrodes allow sensitive capture of H₂O₂ produced by A549 cells. Compared with the conventional method of detection in cell suspensions, an ITO electrode with a large specific surface area and good biocompatibility can provide a promising platform for cell adhesion, so as to realize real-time and in situ detection of extracellular H₂O₂. The experimental results show that A549 cells can adhere to the surface of the Hemin-G4/Au/ITO electrode and grow well. This is benefitted from the three-dimensional structure of the Hemin-G4/Au hydrogel, which provides a suitable microenvironment for cell adhesion and growth. Furthermore, the in situ detection shows a faster response time than that of in-solution detection. This is because the H₂O₂ generated by the cells can be directly captured by the ITO electrode, which avoids diffusion from the solution to the electrode. These results indicate that the self-supporting hydrogel modified ITO electrode has great application prospects in basic biomedical research and continuous dynamic surveillance of diseases.

A cathode photoelectrochemical assay of terminal deoxynucleotidyl transferase activity based on Ag-AgI-CNTs composite and surface multisite strand displacement amplification

Photocathode-based assay is anti-interference for real sample detection. Photocathode produces low photocurrent signal and gives rise to poor sensitivity. Herein, a novel cathode photoelectrochemical (CPEC) sensing platform based on Ag-AgI-CNTs as photocathode material and K₃[Fe(CN)₆] as photoelectron acceptor was established. Since [Fe(CN)₆]^3- effectively accepted photoelectrons from Ag-AgI-CNTs, it greatly enhanced the CPEC response. Combining a surface multisite strand displacement amplification (SMSDA) strategy, the CPEC platform was applied for the activity assay of terminal deoxynucleotidyl transferase (TdT). In this proposal, oligo dT primer tethered on CPEC platform was in-situ extended to generate a polyA tail. Then the polyA tail formed a stable multi-point hybrid structure with the adjacent oligo dT. After launching the SMSDA, the CPEC platform was covered by more elongated polynucleotide chains and network, which acutely hampered the photoelectron transfer (eT) between photocathode and electron acceptor and caused a reduced photocurrent. The CPEC sensor possessed a satisfactory linear response from 6 × 10^-5-0.1 U and a low detection limit of 1.1 × 10^-5 U. The strategy offered a more specific and sensitive method for TdT activity assay. It was feasible in the field of TdT-based biochemical research, drug screening, and disease diagnosis.

An electrochemical platform based on a hemin-rGO-cMWCNTs modified aptasensor for sensitive detection of kanamycin

Kanamycin (KANA) residue in meat is particularly harmful to public health and there is an urgent need to establish a fast, accurate and low-cost method to determinate KANA in food quality control. In this paper, hemin-reduced graphene oxide-carboxylated multiwalled carbon nanotubes (hemin-rGO-cMWCNTs) were designed and prepared, and the characteristics of hemin-rGO-cMWCNTs are presented. After that, an aptamer/hemin-rGO-cMWCNTs sensor for determination of KANA was developed. The electrochemical characteristics were studied by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the sensitive response of the aptasensor towards KANA presented a wide concentration range of 10-9 to 10-6 M and a low detection limit of 0.36 nM (S/N = 3). Meanwhile, the aptasensor showed prominent selectivity, high stability and acceptable reproducibility in the application of KANA detection. In addition, the aptasensor detection in real samples correlated well with that obtained by liquid chromatograph mass spectrometer (LCMS).