Copper removal from wastewater using spent-grain as biosorbent

Long-term monitoring of constructed wetlands in distilleries in Scotland - Evaluating treatment performance and seasonal microbial dynamics

Constructed wetlands (CWs) have been used to treat industrial wastewater in Scotland, including within the whisky industry to treat the second distillation byproduct known as "spent lees". However, despite the notable advantages of CWs (including simplicity, cost-effectiveness, and energy efficiency) their adoption by distilleries still remains relatively limited. Concerns regarding unstable performance, clogging, and sensitivity to cold temperatures have tended to limit their widespread utilisation. This paper considers these concerns through a comprehensive analysis of water treatment performance and microbial community variation across different seasons in three horizontal subsurface flow constructed wetlands (HSF CWs) situated within several whisky distilleries in Scotland. One of these wetlands operates year-round and the other two are generally only active in autumn and spring. Across these CWs, consistent success was observed in the removal of dissolved copper (dissCu) throughout the seasons. However, significant differences in performance were observed both within the same CW (across different seasons) and between different CWs (during the same season) for various water quality parameters (including suspended solids, turbidity, dissolved organic carbon, chemical oxygen demand, nutrients, and pH). Microbial diversity within each CW showed minimal variation between seasons at the class and order levels. However, substantial differences in bacterial community were detected between different CWs during the same season. Gammaproteobacteria, Alphaproteobacteria, and Bacteroidia consistently ranked among the top 5 most abundant classes in each CW, though their specific abundance rankings varied. At the bacterial class level, redundancy analysis revealed strong correlations between treatment performance metrics and specific taxa, including Planctomycetacia with TON removal, Acidobacteriia with COD and DOC removal and pH buffering, Bacilli with SRP removal, and Alphaproteobacteria with NH₄⁺ removal. At the fungal class level, Rozellomycota_cls_Incertae_sedis demonstrated significant associations with multi-pollutant removal and pH buffering, highlighting its ecological role in treatment processes. This research provides insights regarding the seasonal dynamics of CWs, offering recommendations that could be used to optimise their application within the whisky industry and beyond.

Functional Ag-EDTA-modified MnO2 nanocoral reef for rapid removal of hazardous copper from wastewater

A novel MnO2@EDTA-Ag nanocoral reef was constructed via a simplified redox reaction followed by EDTA and Ag nanoparticles impregnation to capture hazardous copper (II) from wastewater. A comprehensive characterization of the synthesized materials was conducted. The morphology of MnO2@EDTA-Ag in the form of a nanocoral reef was constructed of two-dimensional nanoplatelets and nanorod-like nanostructures. The optimal adsorption conditions proposed by the Plackett-Burman design (PBD) that would provide a removal % of 99.95 were pH 5.5, a contact time of 32.0 min, a Cu(II) concentration of 11.2 mg L-1, an adsorbent dose of 0.05 g, and a temperature of 40.3 °C. The loading of Ag nanoparticles onto MnO2@EDTA improved the adsorption capability of MnO2@EDTA-Ag. Additionally, the recyclability of MnO2@EDTA-Ag nanocoral reef was maintained at 80% after three adsorption-desorption cycles, and there was no significant change in the XRD analysis before and after the recycling process, implying its stability. It was found that nanocoral reef-assisted EDTA formed a chelation/complexation reaction between COO- groups and C-N bonds of EDTA with Cu(II) ions. In addition, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis proved the synergistic effect of the electrostatic interaction and chelation/complexation was responsible for the removal mechanism of Cu(II). Also, the results demonstrated no significant variation in MnO2@EDTA-Ag removal efficiency for all the tested real water samples, revealing its efficacy in wastewater treatment. Therefore, the current study suggests that MnO2@EDTA-Ag has substantial potential to be used as a feasible adsorbent for probable hazardous metals remediation.

Characterization of brewer's spent grain extracts by tandem mass spectrometry and HPLC-DAD: Ferulic acid dehydrodimers, phenolamides, and oxylipins

Brewer's spent grain (BSG) is a major by-product of the brewing industry which is generated in high amounts. In recent years, sustainable food production has become more and more important. BSG mainly used as cattle feed has gained high interest due to not only its valuable ingredients such as fiber and proteins but also secondary metabolites remaining in BSG after the brewing process and known for many biological effects. In the present study, various methods were applied, such as acetone extraction (A), alkaline hydrolysis followed by ethyl acetate extraction (HE), and acetone extraction of alkaline hydrolysis residue (HA). Compounds present in the respective bioactive extracts were characterized by mass spectrometry to identify the active compounds. Various hydroxycinnamic acid derivatives as well as oxylipins and some dicarboxylic acids, such as azelaic acid, were present in HE and HA extracts. In contrast, some catechins and phenolamides, such as numerous hordatines, as well as oxylipins and phospholipids were detected in A extracts. Quantification using HPLC-DAD revealed hordatine contents up to 172.2 ± 2.1 μg p-coumaric acid equivalents/mg extract. Hydroxycinnamic acid derivatives content accounted for up to 48% of the total extract (HE extracts) but only around 3% of the total HA extracts. In summary, all extracts contained secondary plant metabolites belonging to different classes, ranging from hydroxycinnamic acids to phenolamides, such as not only hordatines but also oxylipins, which were identified for the first time in BSG.

Continuous-mode acclimation and operation of lignocellulosic sulfate-reducing bioreactors for enhanced metal immobilization from acidic mining-influenced water

Lignocellulosic sulfate-reducing bioreactors are an inexpensive passive approach for treatment of mining-influenced water (MIW). Typically, microbial community acclimation to MIW involves bioreactor batch-mode operation to initiate lignocellulose hydrolysis and fermentation and provide electron donors for sulfate-reducing bacteria. However, batch-mode operation could significantly prolong bioreactor start-up times (up to several months) and select for slow-growing microorganisms. In this study we assessed the feasibility of bioreactor continuous-mode acclimation to MIW (pH 2.5, 6.5 mM SO₄^2-, 18 metal(loid)s) as an alternate start-up method. Results showed that bioreactors with spent brewing grains and sugarcane bagasse achieved acclimation in continuous mode at hydraulic retention times (HRTs) of 7-12-d within 16-22 days. During continuous-mode acclimation, extensive SO₄^2- reduction (80 ± 20% -91 ± 3%) and > 98% metal(loid) removal was observed. Operation at a 3-d HRT further yielded a metal(loid) removal of 97.5 ± 1.3 -98.8 ± 0.9% until the end of operation. Sulfate-reducing microorganisms were detected closer to the influent in the spent brewing grains bioreactors, and closer to the effluent in the sugarcane bagasse bioreactors, giving insight as to where SO₄^2- reduction was occurring. Results strongly support that a careful selection of lignocellulose and bioreactor operating parameters can bypass typical batch-mode acclimation, shortening bioreactor start-up times and promoting effective MIW metal(loid) immobilization and treatment.

Heavy Metal Ions Removal from Aqueous Solutions by Treated Ajwa Date Pits: Kinetic, Isotherm, and Thermodynamic Approach

In the current study we prepared cost-effective adsorbents based on ajwa date pits to remove Cu(II) ions from aqueous medium. Adsorbents were studied using scanning electron microscopy (SEM), FT-IR, and Brunauer-Emmett-Teller (BET) methods to characterize the surface functionalities, morphology, pore size, and particle size. The concentration of Cu(II) ions in the studied samples was determined by atomic adsorption spectrometry technique (AAS). Adsorption method was performed sequentially in a batch system followed by optimization by studying the numerous conditions, for instance the initial amounts of Cu(II) ions, dosages of the adsorbent, contact time, and pH of the solution. The ideal pH observed for maximum adsorption capacity was ~6.5. Langmuir and Freundlich isotherm models correctly predicted the investigation results, with the maximum monolayer adsorption capacities for Cu(II) ions at 328 K being 1428.57 mg/g (treated ajwa date pits, TADP) and 1111.1 mg/g for as produced ajwa date pits (ADP). It was revealed that TADP possess greater adsorption capability than ADP. Recovery investigations revealed that the saturated adsorbents eluted the maximum metal with 0.1 M HCl. Cu(II) ions adsorption was observed to be reduced by 80-89% after the second regeneration cycle. For the raw and chemically processed ajwa date pits adsorbent, the Langmuir model performed significantly better than the Freundlich model. The results demonstrated that the adsorbent made from ajwa date pits could be an economical and environmentally friendly alternative for removing Cu(II) ion pollutant from aqueous media.

Adsorption Performance of Cd(II) by Chitosan-Fe3O4-Modified Fish Bone Char

In order to develop a low-cost, fast, and efficient adsorbent, the fish bone charcoal B₆₀₀ prepared at 600 °C was modified by chitosan (Cs) and Fe₃O₄ to produce the material Cs-Fe₃O₄-B₆₀₀. Results showed that Cs-Fe₃O₄-B₆₀₀ had magnetic responsiveness and can achieve solid–liquid separation, macropores disappeared, pore volume and specific surface area are increased, and amino functional groups appear on the surface. The adsorption process of Cd(II) by Cs-Fe₃O₄-B₆₀₀ conformed best to the pseudo-second order kinetics model and the Langmuir model, respectively. The behavior over a whole range of adsorption was consistent with chemical adsorption being the rate-controlling step, which is a very fast adsorption process, and the isothermal adsorption is mainly monolayer adsorption, which belongs to favorable adsorption. In addition, the saturated adsorption capacity obtained for the Cs-Fe₃O₄-B₆₀₀ to Cd(II) was 64.31 mg·g⁻¹, which was 1.7 times than B₆₀₀. The structure and morphology of Cs-Fe₃O₄-B₆₀₀ were characterized through SEM-EDS, TEM, FTIR, and XRD, indicating that the main mechanism of Cs-Fe₃O₄-B₆₀₀ and Cd(II) is mainly the complexation of amino groups, and it also includes part of the ion exchange between Cd(II) and Fe₃O₄. Therefore, Cs-Fe₃O₄-B₆₀₀ can be employed as an effective agent for remediation of Cd contaminated water.

Adsorption of Cu(II) by Poly-γ-glutamate/Apatite Nanoparticles

Poly-γ-glutamate/apatite (PGA-AP) nanoparticles were prepared by chemical coprecipitation method in the presence of various concentrations of poly-γ-glutamate (γ-PGA). Powder X-ray diffraction pattern and energy-dispersive spectroscopy revealed that the main crystal phase of PGA-AP was hydroxyapatite. The immobilization of γ-PGA on PGA-AP was confirmed by Fourier transform infrared spectroscopy and the relative amount of γ-PGA incorporation into PGA-AP was determined by thermal gravimetric analysis. Dynamic light scattering measurements indicated that the particle size of PGA-AP nanoparticles increased remarkably with the decrease of γ-PGA content. The adsorption of aqueous Cu(II) onto the PGA-AP nanoparticles was investigated in batch experiments with varying contact time, solution pH and temperature. Results illustrated that the adsorption of Cu(II) was very rapid during the initial adsorption period. The adsorption capacity of PGA-AP nanoparticles for Cu(II) was increased with the increase in the γ-PGA content, solution pH and temperature. At a pH of 6 and 60 °C, a higher equilibrium adsorption capacity of about 74.80 mg/g was obtained. The kinetic studies indicated that Cu(II) adsorption onto PGA-AP nanoparticles obeyed well the pseudo-second order model. The Langmuir isotherm model was fitted well to the adsorption equilibrium data. The results indicated that the adsorption behavior of PGA-AP nanoparticles for Cu(II) was mainly a monolayer chemical adsorption process. The maximum adsorption capacity of PGA-AP nanoparticles was estimated to be 78.99 mg/g.

Acylation modification of konjac glucomannan and its adsorption of Fe (Ⅲ) ion

A biodegradable adsorbent, modified konjac glucomannan (MKGM), was prepared by konjac glucomannan (KGM) acylated with phthalic anhydride catalyzed using concentrated sulfuric acid. The modified conditions such as reaction temperature, mass ratio of phthalic anhydride to KGM, catalyst dosage and reaction time were investigated, respectively. MKGM exhibited preferable adsorption performance for the removal of Fe (Ⅲ) ion. The adsorption behavior was discussed using the Langmuir and Freundlich isotherm models. The results showed that the Freundlich linear model was suitable for describing the adsorption process of Fe (Ⅲ). The maximum adsorption capacity of MKGM for Fe (Ⅲ) ion was 31.87 mg g^-1 at 298 K. The kinetics studies suggested that adsorption process followed the pseudo-second-order model and the adsorption process was mainly controlled by both surface reactivity and intra-particle diffusion. Together with the evaluation of the thermodynamic parameters such as Gibbs free energy, enthalpy and entropy changes, the results indicated that the adsorption process of Fe (Ⅲ) was endothermic, feasible, and spontaneous in nature. Hence, as a bioadsorbent, the MKGM has a promising potential for the removal of Fe (Ⅲ) ion from aqueous solutions.

Characterization of Pot Ale from a Scottish Malt Whisky Distillery and Potential Applications

Over 2.7 billion liters of pot ale is produced annually as a co-product of Scottish malt whisky, and apart from evaporation to pot ale syrup as a feed, it is primarily treated by anaerobic digestion or land/sea disposal. The aim of this study was to assess pot ale components and their potential applications. The insoluble solid fraction, mainly consisting of yeast, contained 55% protein, and as a protein feed ingredient, this could yield 32,400 tons of feed per annum, although the Cu content of this fraction would need to be monitored. The liquid fraction could yield 33,900 tons of protein per annum, and an SDS-PAGE profile of this fraction demonstrated that the proteins may be similar to those found in beer, which could extend their application as a food ingredient. This fraction also contained phosphorus, potassium, and polyphenols among other components, which could have added value. Overall, fractionation of pot ale could offer an alternative to evaporation to pot ale syrup while retaining the protein fraction in the food chain.

Mild hydrothermally treated brewer's spent grain for efficient removal of uranyl and rare earth metal ions

The increasing concerns on uranium and rare earth metal ion pollution in the environment require sustainable strategies to remove them from wastewater. The present study reports an eco-friendly approach to convert a kind of protein-rich biomass, brewer's spent grain (BSG), into effective biosorbents for uranyl and rare earth metal ions. The employed method reduces the energy consumption by performing the hydrothermal treatment at a significantly lower temperature (150 °C) than conventional hydrothermal carbonization. In addition, with the aid of the Maillard reaction between carbohydrates and proteins forming melanoidins, further activation processes are not required. Treatment at 150 °C for 16 h results in an altered biosorbent (ABSG) with increased content of carboxyl groups (1.46 mmol g⁻¹) and a maximum adsorption capacity for La³⁺, Eu³⁺, Yb³⁺ (pH = 5.7) and UO₂²⁺ (pH = 4.7) of 38, 68, 46 and 221 mg g⁻¹, respectively. Various characterization methods such as FT-IR, ¹³C CP/MAS NMR, SEM-EDX and STA-GC-MS analysis were performed to characterize the obtained material and to disclose the adsorption mechanisms. Aside from oxygen-containing functional groups, nitrogen-containing functional groups also contribute to the adsorption. These results strongly indicate that mild hydrothermal treatment of BSG could be applied as a greener, low-cost method to produce effective adsorbents for uranyl and rare earth metal ion removal.

Effective biosorbent ABSG is obtained via hydrothermal treatment of BSG at low temperature without activation, minimizing energy consumption and environmental impact.

Overview of Some Recent Advances in Improving Water and Energy Efficiencies in Food Processing Factories

Rapid development of food factories in both developed and developing countries, owing to continued growth in the world population, plays a critical role in the food supply chain, including environmental issues such as pollution, emissions, energy and water consumption, and thus food system sustainability. The objective of this study was to briefly review various environmental aspects of food processing operations, including aquatic, atmospheric, and solid waste generation, and also to discuss several strategies that many companies are using to reduce these negative impacts as well as to improve water and energy efficiency. To obtain higher energy efficiencies in food processing factories, two key operations can play critical roles: non-thermal processing (e.g., high pressure processing) and membrane processes. For higher water efficiency, reconditioning treatments resulting in water reuse for other purposes can be conducted through chemical and/or physical treatments. With regards to reducing volumes of processing food waste, two approaches include value-added by-product applications (e.g., animal feed) and/or utilization of food waste for energy production. Finally, we present trends for lowering operational costs in food processing.

Comparison of sustainable biosorbents and ion-exchange resins to remove Sr2+ from simulant nuclear wastewater: Batch, dynamic and mechanism studies

Removal of Sr²⁺ from aqueous media presents particular challenges, especially in complex wastes such as nuclear industry liquors. Commercial sorbents while effective, can be highly expensive and subject to negative effects from competing ions. Here we evaluate two potential biosorbents (crab carapace and spent distillery grain) as potential alternatives and compare their performance to two commercial sorbents for Sr²⁺ removal at industrially relevant concentrations (low mg/L). Physical and structural characterization of the materials was undertaken, and batch and dynamic studies were performed on Sr²⁺ solutions and simulated nuclear wastewater. Sorption performance was quantified with respect to contact time, initial concentration and ion-competition. Removal efficiencies were 20-70% for the biosorbents compared to 55-95% for the commercial materials. Results indicated sorption was predominantly through monolayer coverage on homogenous sites and could be described using a pseudo-second-order kinetic model. Studies with the simulant liquor showed Sr²⁺ sorption was reduced by 10-40% due to ion-competition for sites. Characterization of biosorbents before and after Sr²⁺ sorption suggested that outer-sphere complexation and ion-exchange were the primary Sr²⁺ removal mechanisms. The efficiency of crab carapace for Sr²⁺ removal from aqueous media (with adsorption capacity 3.92 mg/g.) at industrially relevant concentrations, together with its mechanical stability, implementation and disposal cost, makes it a competitive option compared to other biosorbents and commercial materials reported in the literature.

Cellulose nanocrystal-reinforced keratin bioadsorbent for effective removal of dyes from aqueous solution

High-efficiency and recyclable three-dimensional bioadsorbents were prepared by incorporating cellulose nanocrystal (CNC) as reinforcements in keratin sponge matrix to remove dyes from aqueous solution. Adsorption performance of dyes by CNC-reinforced keratin bioadsorbent was improved significantly as a result of adding CNC as filler. Batch adsorption results showed that the adsorption capacities for Reactive Black 5 and Direct Red 80 by the bioadsorbent were 1201 and 1070mgg^-1, respectively. The isotherms and kinetics for adsorption of both dyes on bioadsorbent followed the Langmuir isotherm model and pseudo-second order model, respectively. Desorption and regeneration experiments showed that the removal efficiencies of the bioadsorbent for both dyes could remain above 80% at the fifth recycling cycles. Moreover, the bioadsorbent possessed excellent packed-bed column operation performance. Those results suggested that the adsorbent could be considered as a high-performance and promising candidate for dye wastewater treatment.

Aqueous Phase Biosorption of Pb(II), Cu(II), and Cd(II) onto Cabbage Leaves Powder

In this study, the biosorption of lead (Pb(II)), copper (Cu(II)), and cadmium (Cd(II)) ions from aqueous solution using waste of cabbage leaves powder (CLP) was investigated as a function of pH, shaking time, initial metal concentration, and biosorbent dose. The maximum removal efficiency at optimum condition in single biosorption system was 95.67, 92.42, and 88.92 % for Pb(II), Cu(II), and Cd(II) ions, respectively. These values reduced in ternary systems in the same sequence. Langmuir and extended Langmuir isotherm models were found to be the best fit of the isotherm data for single and ternary biosorption systems, respectively. The kinetic data of the three metals were better fit by the pseudo-second-order model with higher coefficient of determination and more closely predicted uptake. In addition, the results showed that the intraparticle diffusion was the dominating mechanism. Thermodynamic study showed that the biosorption of Pb(II), Cu(II), and Cd(II) onto CLP was a chemical reaction which was exothermic in nature. Finally, SEM image shows that CLP has a number of heterogeneous small pores while the Fourier transform infrared (FTIR) spectroscopic analysis showed that the carboxyl, amine, and hydroxyl groups are the major groups that are responsible for the biosorption process.

In-Situ Remediation Approaches for the Management of Contaminated Sites: A Comprehensive Overview

Though several in-situ treatment methods exist to remediate polluted sites, selecting an appropriate site-specific remediation technology is challenging and is critical for successful clean up of polluted sites. Hence, a comprehensive overview of all the available remediation technologies to date is necessary to choose the right technology for an anticipated pollutant. This review has critically evaluated the (i) technological profile of existing in-situ remediation approaches for priority and emerging pollutants, (ii) recent innovative technologies for on-site pollutant remediation, and (iii) current challenges as well as future prospects for developing innovative approaches to enhance the efficacy of remediation at contaminated sites.

Competitive adsorption of heavy metals by extracellular polymeric substances extracted from Klebsiella sp. J1

The adsorption of Cu(2+) and Zn(2+) by extracellular polymeric substances (EPS) extracted from Klebsiella sp. J1 and competitive adsorption mechanism were investigated. Equilibrium adsorption capacities of Cu(2+) (1.77mMg(-1)) on Klebsiella sp. J1 EPS were higher than those of Zn(2+) (1.36mMg(-1)) in single systems. The competitive Langmuir and Langmuir-Freundlich isotherm models were proven to be effective in describing the experimental data of binary component system. The three dimensional sorption surfaces of binary component system demonstrated that the presence of Cu(2+) more significantly decreased the sorption of Zn(2+), but the sorption of Cu(2+) was not disturbed by the presence of Zn(2+). FTIR and EEM results revealed the adsorption sites of Cu(2+) entirely overlapped with those of Zn(2+). Cu(2+) and Zn(2+) showed competitive adsorption in binary systems, and Cu(2+) was preferentially adsorbed because of the stronger complexation ability of the protein-like substances in Klebsiella sp. J1 EPS.

Waste biomass adsorbents for copper removal from industrial wastewater--a review

Copper (Cu(2+)) containing wastewaters are extensively released from different industries and its excessive entry into food chains results in serious health impairments, carcinogenicity and mutagenesis in various living systems. An array of technologies is in use to remediate Cu(2+) from wastewaters. Adsorption is the most attractive option due to the availability of cost effective, sustainable and eco-friendly bioadsorbents. The current review is dedicated to presenting state of the art knowledge on various bioadsorbents and physico-chemical conditions used to remediate Cu(2+) from waste streams. The advantages and constraints of various adsorbents were also discussed. The literature revealed the maximum Cu adsorption capacities of various bioadsorbents in the order of algae>agricultural and forest>fungal>bacterial>activated carbon>yeast. However, based on the average Cu adsorption capacity, the arrangement can be: activated carbon>algal>bacterial>agriculture and forest-derived>fungal>yeast biomass. The data of Cu removal using these bioadsorbents were found best fit both Freundlich and Langmuir models. Agriculture and forest derived bioadsorbents have greater potential for Cu removal because of higher uptake, cheaper nature, bulk availability and mono to multilayer adsorption behavior. Higher costs at the biomass transformation stage and decreasing efficiency with desorption cycles are the major constraints to implement this technology.

Utilization of rice husks modified by organomultiphosphonic acids as low-cost biosorbents for enhanced adsorption of heavy metal ions

Novel biosorbent materials (RH-2 and RH-3) obtained from agricultural waste materials rice husks (RH-1) were successfully developed through fast and facile esterification reactions with hydroxylethylidenediphosphonic acid and nitrilotrimethylenetriphosphonic acid, respectively. The present paper reported the feasibility of using RH-1, RH-2 and RH-3 for removal of heavy metals from simulated wastewater, the results revealed that the adsorption property of functionalized rice husks with organotriphosphonic acid RH-3 for Au(III) was very excellent, especially for gold ions. The combined effect of initial solution pH, RH-3 dosage and initial Au(III) concentration was investigated using response surface methodology (RSM), the results showed that initial Au(III) concentration exerted stronger influence on Au(III) uptake than initial pH and biomass dosage. The analysis of variance (ANOVA) of the quadratic model demonstrated that the model was highly significant, and under the optimum process conditions, the maximum adsorption capacity could reach 3.25 ± 0.07 mmol/g that is higher than other reported adsorbents.

Phenanthrene removal from aqueous solutions using well-characterized, raw, chemically treated, and charred malt spent rootlets, a food industry by-product

Malt spent rootlets (MSR) are biomaterials produced in big quantities by beer industry as by-products. A sustainable solution is required for their management. In the present study, MSR are examined as sorbents of a hydrophobic organic compound, phenanthrene, from aqueous solutions. Raw MSR sorb phenanthrene but their sorptive properties are not competitive with the respective properties of commercial sorbents (e.g., activated carbons). Organic petrography is used as a tool to characterize MSR after treatment in order to produce an effective sorbent for phenanthrene. Chemical and thermal (at low temperature under nitrogen atmosphere) treatments of MSR did not result in highly effective sorbents. Based on organic petrography characterization, the pores of the treated materials were filled with humic colloids. When pyrolysis at 800 °C was used to treat MSR, a sorbent with new and empty pores was produced. Phenanthrene sorption capacity was 2 orders of magnitude higher for the pyrolized MSR than for raw MSR.

Biosorption of Cr(VI) from aqueous solution by chemically modified potato starch: equilibrium and kinetic studies

The biosorption capacity of chemically modified potato starch (CPS) for Cr(VI) from aqueous solution was investigated. The materials derived from carbohydrates are biodegradable and are generally regarded as safe and environmentally acceptable. The hydroxyl, carboxyl and carbonyl groups are responsible for the biosorption process. In the present study, the influence of various important parameters such as pH, time, biosorbent dose and initial Cr(VI) concentration on the biosorption capacity were investigated. The isotherms such as Langmuir, Freundlich and Tempkin were studied. The Freundlich and the Redlich-Peterson isotherms had been well fitted the biosorption of Cr(VI) with chemically modified potato starch. The kinetics of Cr(VI) removal using chemically modified potato starch was well explained by second-order kinetic model. The thermodynamic parameters were also evaluated from the biosorption measurements. Among the various desorbing agents tested, 98.2 percent chromium recovery was achieved with 0.1molL(-1) NaOH.

Removal of Cu(II) from acidic electroplating effluent by biochars generated from crop straws

The removal efficiency of copper (Cu(II)) from an actual acidic electroplating effluent by biochars generated from canola, rice, soybean and peanut straws was investigated. The biochars simultaneously removed Cu(II) from the effluent, mainly through the mechanisms of adsorption and precipitation, and neutralized its acidity. The removal efficiency of Cu(II) by the biochars followed the order: peanut straw char > soybean straw char > canola straw char > rice straw char >> a commercial activated carbonaceous material, which is consistent with the alkalinity of the biochars. The pH of the effluent was a key factor determining the removal efficiency of Cu(II) by biochars. Raising the initial pH of the effluent enhanced the removal of Cu(II) from it. The optimum pyrolysis temperature was 400 degrees C for producing biochar from crop straws for acidic wastewater treatment, and the optimum reaction time was 8 hr.

The adsorption of heavy metal by Bornean oil palm shell and its potential application as constructed wetland media

Oil palm shell, a waste from palm oil industry, was cleaned and utilized as adsorbent. Its particle size distribution gave the uniformity coefficient of approximately two indicating that it can be used as filter bed media for continuous operation without resting. Its measured pH(pzc) of 4.1 is below the common pH of constructed wetland water body suggesting positive adsorption for heavy metal. The effect of various parameters on its adsorption was studied via batch experiments. The adsorption of Cu(II) and Pb(II) ions by oil palm shell showed a slightly better fit with the Freundlich compared to Langmuir. Its monolayer adsorption capacities were found to be 1.756 and 3.390mg/g for Cu(II) and Pb(II), respectively. High correlation coefficient of over 0.99 given by the pseudo-second-order model suggests that the rate limiting factor may be chemisorption. These findings suggest its potential application as constructed wetland media for the removal of heavy metal.

Uptake of gold (III) from waste gold solution onto biomass-based adsorbents organophosphonic acid functionalized spent buckwheat hulls

Novel biomass-based adsorbents organophosphonic acid functionalized spent buckwheat hulls (OPA-BH) with 60 mesh were successfully employed to adsorb Au(III) ions from simulated wastewater. The adsorption kinetics and isotherms both in unary ion system and in ternary ions system were investigated, and the applicability of the Langmuir, Freundlich and extended Langmuir isotherm models has been tested for the equilibrium. The process optimization was also conducted by using response surface methodology (RSM), and the maximum adsorption capacities reached 2.84 ± 0.01 mmol/g under the optimum process conditions. Furthermore, the regeneration capacities of OPA-BH were investigated by using the eluent solutions of 0.0-5.0% thiourea in 0.1 mmol/L HCl, and the results showed that the adsorption capabilities for OPA-BH were ranged between 0.77 mmol/g and 0.85 mmol/g after three cycles of adsorption-desorption processes. The research results showed that OPA-BH was favorable and useful for gold adsorption, and the high adsorption capacity and good reproducibility make it a good promising material for the precious metal uptake.

Biosorption of heavy metal ions onto agricultural residues buckwheat hulls functionalized with 1-hydroxylethylidenediphosphonic acid

Novel biosorbent materials obtained from agricultural residues buckwheat hulls (BH) were successfully developed through functionalization with 1-hydroxylethylidenediphosphonic acid (HEDP), and they were characterized. This paper reports the feasibility of using HEDP-BH for removal of heavy metals from stimulated wastewater, the experimental results revealed that the adsorption property of functionalized buckwheat hulls with 120 mesh 120-HEDP-BH for Au(III) was very excellent, and the monolayer maximum adsorption capacity for Au(III) calculated from the Langmuir isotherm models was up to 450.45 mg/g at 35 °C. The combined effect of initial solution pH, 120-HEDP-BH dosage, and initial Au(III) concentration was investigated using response surface methodology (RSM), and the result showed that biomass dosage exerted a stronger influence on Au(III) uptake than those of initial pH and initial Au(III) concentration. Analysis of variance (ANOVA) of the quadratic model demonstrated that the model was highly significant. Moreover, investigation on the adsorption selectivity showed that 120-HEDP-BH displayed strong affinity for gold in aqueous solutions and even exhibited 100% selectivity for Au(III) ions in the presence of Zn(II) and Co(II). Regeneration capacities of 120-HEDP-BH were studied using the eluent solutions of 0.0-5.0% thiourea in 0.1 mmol/L HCl, and it was found that the adsorption capability remains high after several cycles of adsorption-desorption process.