Comparison of bamboo green, timber and yellow in sulfite, sulfuric acid and sodium hydroxide pretreatments for enzymatic saccharification

Interaction between lignin and cellulose during the pyrolysis process

The hierarchical and heterogeneous structures and the interactions between biomass components within cell walls are closely related to the pyrolysis characteristics. In this work, thermogravimetric analysis (TGA) and pyrolysis kinetics analysis were used to investigate the pyrolysis characteristics of windmill palm (Trachycarpus fortunei (Hook.) H. Wendl.) culm and silk after delignification. The results demonstrate cellulose pyrolysis temperature of silk is much higher than that of culm, attributed to the higher lignin content of the former. After delignification, the cellulose pyrolysis temperature of silk decreased by 48 °C, which is much higher than that of culm by 18 °C, suggesting a strong interaction between lignin and cellulose during the pyrolysis process. Futhermore, pyrolysis kinetics analysis also found that the frequency factor of slik and culm increased by 129 % and 26 %, respectively, attributed to the disappearance of the carbon layer formed by lignin pyrolysis process. And, differ in lignin content is responsible for the discrepancy of frequency factor increase. In conclusion, we propose a mechanism model for lignin hindering cellulose pyrolysis, which is of great significance for understanding the pyrolysis interactions of biomass components in complex supramolecular cell wall.

Degradation selectivity for bamboo fiber and parenchyma lignin-carbohydrates complexes (LCC) esters

The degradation of lignin-carbohydrate complex (LCC) esters has been proven to be crucial for the selective separation of lignocellulosic components. This study utilized Raman microspectroscopy to image the preferential degradation of lignin and LCC esters from the bamboo wall during successive NaOH (0.2 to 5.0 % w/w), H2SO4 (1 to 8 % v/v), and NaClO2 (5 to 20 min) treatments. Raman imaging showed that lignin and LCC esters were selectively removed from the middle lamella of fibers and the secondary wall of parenchyma during NaOH and NaClO2 treatments. In contrast, H2SO4 primarily caused the simultaneous removal of lignin and LCC esters from the fiber wall under harsh conditions (8 %), while the middle lamella of parenchyma was less affected, both morphologically and topochemically. Raman spectral analysis indicated that the band intensity at 1605 cm-1 for lignin and at 1173 cm-1 for LCC esters decreased by >87.0 % in the highly lignified parenchyma secondary wall after a 5.0 % NaOH treatment, while the decrease was <67 % in the fiber wall. Interestingly, a strong linear correlation was observed between LCC esters and carbohydrates in the parenchyma (R2 > 0.912). These findings provide important insights into the graded and classified utilization of bamboo resources.

Towards integrated sustainable biofuel and chemical production: An application of banana pseudostem ash in the production of biodiesel and recovery of lignin from bamboo leaves

This study investigated an integrated approach to the biowaste transformation and valorization of byproducts. Biochar obtained from the banana pseudostem was calcined to synthesize a heterogeneous catalyst and sustainably prepare a highly alkaline solution. The ash was utilized directly as a heterogeneous catalyst in biodiesel production from waste cooking oil. At the same time, an alkaline solution prepared from the ash was used for delignification and recovery of lignin from bamboo leaves by the hydrothermal reaction. Techniques like Fourier-transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET), Transmission electron microscopy (TEM), and Energy dispersive X-ray (EDX) were applied to characterized the catalyst. The alkaline solution was analyzed with Atomic absorption spectroscopy (AAS). The Response surface methodology (RSM) technique was considered for the optimization of different parameters in the transesterification and hydrothermal reaction. Under the optimized condition, waste cooking oil (WCO) to Fatty acid methyl ester (FAME) conversion was 97.56 ± 0.11%, and lignin recovery was 43.20 ± 0.45%. While at the best operating pyrolysis temperature, the liquid fraction yield from the banana pseudostem (500 °C) was 38.10 ± 0.31 wt%. This integrated study approach encourages the inexpensive, sustainable, and environment-friendly pathway for synthesizing catalysts and preparing a highly alkaline solution for the valorization of biowaste into biofuel and biochemicals.

Quantitative comparison of the delignification performance of lignocellulosic biomass pretreatment technologies for enzymatic saccharification

Pretreatments for delignification are required for the enzymatic saccharification of lignocellulosic biomasses. However, in the current literature, various pretreatment approaches have been applied for the same kinds of biomass. To find the optimum pretreatments for biomaterials containing various lignin contents, in this study, a quantitative comparison was carried out on the delignification performance of 15 categories of pretreatments. In total, 1729 sets of biomass, cellulose, hemicellulose, and lignin recovery data were collected from 214 relevant studies. Box plots and Cate-Nelson-like graphs were applied for analyses. The results showed that alkali, oxidation, organic solvent, and multistep pretreatments generally were better at removing lignin and recovering cellulose. Moreover, among these four categories, alkali pretreatments had the best performance, increasing the saccharification efficiency by approximately five-fold. Considering both delignification performance and saccharification improvement, alkali pretreatments are currently considered to be the optimum pretreatment methods for enzymatic saccharification.

Analysis of Single-Step Pretreatments for Lignocellulosic Platform Isolation as the Basis of Biorefinery Design

Biorefinery feasibility is highly influenced by the early design of the best feedstock transformation pathway to obtain value-added products. Pretreatment has been identified as the critical stage in biorefinery design since proper pretreatment influences subsequent reaction, separation, and purification processes. However, many pretreatment analyses have focused on preserving and valorizing six-carbon sugars for future use in bioconversion processes, leaving aside fractions such as hemicellulose and lignin. To date, there has been no pretreatment systematization for the removal of lignocellulosic fractions. This work defines pretreatment efficacy through operational, economic, environmental, and social indicators. Thus, using the data reported in the literature, as well as the results of the simulation schemes, a multi-criteria weighting of the best-performing schemes for the isolation or removal of cellulose, hemicellulose, and lignin was carried out. As a main result, it was concluded that dilute acid is the most effective for cellulose isolation and hemicellulose removal for producing platform products based on six- and five-carbon sugars, respectively. Additionally, the kraft process is the best methodology for lignin removal and its future use in biorefineries. The results of this work help to elucidate a methodological systematization of the pretreatment efficacy in the design of biorefineries as an early feasibility stage considering sustainability aspects.

Effect of Age and Height on the Chemical Properties of Muli Bamboo (Melocanna baccifera)

Melocanna baccifera is the most common bamboo species which grows naturally and gregariously covering large tracts of land in the forests of Chittagong Hill Tracts of Bangladesh. However, there is limited information about the chemical characterization of its culms for its utilization and processing. This paper aimed to determine the effect of age and height position on the chemical properties of M. baccifera. The highest value of holocellulose content was 74.66% for the top portion of 3-year-old bamboo, while the bottom part of 3-year-old bamboo showed the highest value of lignin (27.83%) and extractive (5.24%) content. For caustic soda (1% NaOH) solubility, the bottom portion of 1-year-old bamboo had shown the maximum value (25.67%), and it was the lowest (19.10%) for the top portion of 3-year-old bamboo. Ageing had a significant (p < 0.05) effect on all chemical properties, while the height position had a significant effect on the holocellulose and lignin content and water solubility. The chemical properties of M. baccifera can enable its proper utilization in the downstream process.

Improving the Mould and Blue-Stain-Resistance of Bamboo through Acidic Hydrolysis

Bamboo is much more easily attacked by fungus compared with wood, resulting in shorter service life and higher loss in storage and transportation. It has been long accepted that the high content of starch and sugars in bamboo is mainly responsible for its low mould resistance. In this paper, acetic acid, propionic acid, oxalic acid, citric acid, and hydrochloric acid were adopted to hydrothermally hydrolyze the starch in bamboo, with the aims to investigate their respective effect on the mould and blue-stain resistance of bamboo, and the optimized citric acid in different concentrations were studied. The starch content, glucose yields, weight loss, and colour changes of solid bamboo caused by the different acidic hydrolysis were also compared. The results indicated that weak acidic hydrolysis treatment was capable of improving mould-resistant of bamboo. The mould resistance increased with the increased concentration of citric acid. Bamboo treated with citric acid in the concentration of 10% could reduce the infected area ranging to 10-17%, the growth rating of which could reach 1 resistance. The content of soluble sugar and starch remained in bamboo decreased significantly from 43 mg/g to 31 mg/g and 46 mg/g to 23 mg/g, respectively, when the citric acid concentration varied from 4% to 10%. Citric acid treatments of 10% also caused a greatest surface colour change and weight loss. The results in this study demonstrated citric acid treatment can effectively reduce the starch grain and soluble sugars content and improve mould resistance of bamboo, which can be attributed to the reduction of starch grain and soluble carbohydrates (such as glucose, fructose, and sucrose, etc.) in bamboo.

Local Variations in Carbohydrates and Matrix Lignin in Mechanically Graded Bamboo Culms

The mechanical performance of bamboo is highly dependent on its structural arrangement and the properties of biomacromolecules within the cell wall. The relationship between carbohydrates topochemistry and gradient micromechanics of multilayered fiber along the diametric direction was visualized by combined microscopic techniques. Along the radius of bamboo culms, the concentration of xylan within the fiber sheath increased, while that of cellulose and lignin decreased gradually. At cellular level, although the consecutive broad layer (Bl) of fiber revealed a relatively uniform cellulose orientation and concentration, the outer Bl with higher lignification level has higher elastic modulus (19.59-20.31 GPa) than that of the inner Bl close to the lumen area (17.07-19.99 GPa). Comparatively, the cell corner displayed the highest lignification level, while its hardness and modulus were lower than that of fiber Bl, indicating the cellulose skeleton is the prerequisite of cell wall mechanics. The obtained cytological information is helpful to understand the origin of the anisotropic mechanical properties of bamboo.

Improved glucose recovery from durian peel by alkaline-catalyzed steam pretreatment

Durian (Durio zibethinus Murr.) peel, as agricultural waste, is a potential under-utilized lignocellulosic biomass that is sufficiently available in Thailand. In this study, durian peel from monthong (D. zibethinus Murr. cv. Monthong) and chanee (D.zibethinus Murr. cv. Chanee) were subjected to pretreatment with sodium hydroxide (NaOH) under autoclaving conditions to improve glucose recovery. The effect of NaOH concentration (1%, 2%, 3%, and 4%) and autoclave temperature (110 °C, 120 °C, and 130 °C) was investigated based on the amount of glucose recovered. The optimal NaOH concentration and autoclave temperature were determined to be 2% and 110 °C, respectively, under which maximum glucose (36% and 35% in monthong and chanee peels, respectively) was recovered. Glucose recovery was improved by about 6-fold at the optimal pretreatment condition for both pretreated monthong and chanee when compared to the untreated durian peels. Scanning electron microscopy (SEM) showed great changes to the surface morphology of pretreated durian peel from the two cultivars. X-ray diffraction (XRD) analysis also revealed a rise in cellulose crystallinity index (CrIs) after pretreatment. A combination of mild NaOH concentration and autoclaving is a very effective pretreatment technique for maximum glucose recovery from durian peel.

Assessing the policy issues relating to the use of bamboo in the construction industry in Nigeria

The Nigerian government has promoted industrial development based on the area of policy implementation. The development of policy and the use of bamboo in the construction company is very significant because of the role of bamboo cultivation in reducing environmental pollution. Bamboo, in its existence, applies to the environment in absorbing carbon dioxide of about 35% and releases to the environment a high amount of oxygen. This carbon dioxide absorbs by bamboo reduces the ozone layer depletion in the aspect of climate change. Another significance of bamboo is that it creates an environment that reduces the light intensity to protect against ultraviolet emissions. The use of Bamboo is considerable in the construction industry and also as useful reinforcement material. This research discusses the effects of policy issues relating to the use of bamboo in the construction industry in Nigeria. And also, study the significance of bamboo implementation in terms of bamboo used for biomass as a source for bio-energy, furniture, and building development. Also, how bamboo cultivation will affect economic growth in Nigeria. This study also discusses the three policy dimensions as it pertains to implementing bamboo policy in Nigeria and suggested ways of developing bamboo policy for proper regulations.

The Microstructure and Mechanical Properties of Poplar Catkin Fibers Evaluated by Atomic Force Microscope (AFM) and Nanoindentation

In this study, the microstructure and mechanical properties of poplar (Populus tomentosa) catkin fibers (PCFs) were investigated using field emission scanning electron microscope, atomic force microscopy (AFM), X-ray diffraction, and nanoindentation methods. Experimental results indicated that PCFs had a thin-wall cell structure with a large cell lumen and the hollow part of the cell wall took up 80 percent of the whole cell wall. The average diameters of the fiber and cell lumen, and the cell wall thickness were 5.2, 4.2, and 0.5 µm, respectively. The crystallinity of fibers was 32%. The AFM images showed that the orientation of microfibrils in cell walls was irregular and their average diameters were almost between 20.6–20.8 nm after being treated with 2 and 5 wt.% potassium hydroxide (KOH), respectively. According to the test of nanoindentation, the average longitudinal-reduced elastic modulus of the PCF S2 layer was 5.28 GPa and the hardness was 0.25 GPa.

Bioethanol production from bamboo with alkali-catalyzed liquid hot water pretreatment

Altering recalcitrant structures of bamboo is essential to obtain high yield of bioethanol via bioconversion process. With the goal of improving cell wall digestibility, alkaline liquid hot water was used to pretreat N. affinis. The effects of temperature and alkali dosage on structural alterations were determined by chemical composition, Brunauer Emmett Teller (BET) and gel permeation chromatography (GPC). The relationship between these changes and substrate digestibility was addressed by separate enzymatic hydrolysis and fermentation (SHF). The results indicated that pretreatments partly removed and degraded hemicelluloses and lignin, reducing yields of substrates and molecular weights of carbohydrates. With the change of cell wall structure, specific surface area of materials increased after LHW pretreatment but decreased with further removal of lignin and hemicellulosic fractions. Maximum bioconversion was obtained by pretreatment with 0.5% NaOH aqueous at 170 °C and SHF, yielding 4.8 g/L ethanol.

Heterologous overexpression, purification and functional analysis of plant cellulose synthase from green bamboo

BACKGROUND

The cellulose synthase complex (CSC), composed of cellulose synthase (CesA) proteins, is a catalytic enzyme complex involved in cellulose synthesis in the plant cell. CesA proteins synthesize cellulose microfibrils corresponding to the microtubule direction and export linear products across the plasma membrane. However, the CSC arrangement and the mechanism of cellulose synthesis in plant cells remain unclear. Purified CesA proteins are required to determine biochemical and biophysical characteristics.

RESULTS

In this study, we constructed, expressed, and purified six heterologously expressed cellulose synthases from Bambusa oldhamii (BoCesA) and analyzed the associated enzyme activity. The conjugating sequences of the maltose-binding protein (MBP) gene and the BoCesA genes were constructed into the expression vector pYES2/CT and were further transformed into yeast cells (BCY123) for fermentation culturing. Purified BoCesA recombinant proteins were obtained by a two-step purification procedure, consisting of immobilized metal affinity chromatography to purify MBP-BoCesAs and size-exclusion chromatography (Superdex-200) to isolate BoCesAs in oligomeric form. The enzymatic activity of oligomeric BoCesAs with 80% purity was determined by partially methylated alditol acetate (PMAA)-coupled gas chromatography-mass spectrometry (GC-MS) analysis. Furthermore, the long fiber-like products synthesized by oligomeric BoCesAs were observed under a transmission electron microscope (TEM) and were further confirmed as cellulose microfibril products.

CONCLUSIONS

In this study, we successfully established a heterologous expression and purification system for BoCesAs. The purified recombinant BoCesA proteins display enzyme activity and can produce protein in milligram quantities for further studies on molecular composition and structure.

Influence of sulfur dioxide-ethanol-water pretreatment on the physicochemical properties and enzymatic digestibility of bamboo residues

SO₂-ethanol-water (SEW) is a promising pretreatment for improving enzymatic digestibility of biomass through simultaneously removing hemicellulose and lignin. In this work, SEW pretreatment was performed at different cooking times (10 min-60 min) and different SO₂ concentrations (0.5%-2%) to produce pretreated bamboo residues for enzymatic hydrolysis. Meanwhile, physicochemical features of the residual cellulose and lignin were analyzed to better understand how SEW improves enzymatic digestibility. Under optimized SEW pretreatment condition (1% SO₂ concentration, 150 °C, 60 min), 81.7% of xylan and 80.3% of lignin were solubilized, along with 89.1% of cellulose preserved in pretreated solid. A good enzymatic digestibility (80.4%) was achieved at optimum SEW condition. Several compelling correlations (R² > 0.7) were observable between enzymatic digestibility and physicochemical features, demonstrating the importance of SEW pretreatment abilities of hemicellulose and lignin removal, reducing cellulose's degree of polymerization, and improving the amount of sulfonyl groups imparted to the original lignin structure.

Assessment of integrated process based on autohydrolysis and robust delignification process for enzymatic saccharification of bamboo

In this study, bamboo (Phyllostachys pubescens) was successfully deconstructed using an integrated process (autohydrolysis and subsequent delignification). Xylooligosaccharides, high-purity lignin, and digestible substrates for producing glucose can be consecutively collected during the integrated process. The structural change and fate of lignin during autohydrolysis process was deeply investigated. Additionally, the structural characteristics and active functional groups of the lignin fractions obtained by these delignification processes were thoroughly investigated by NMR (2D-HSQC and ³¹P NMR) and GPC techniques. The chemical compositions (S, G, and H) and major linkages (β-O-4, β-β, β-5, etc.) were thoroughly assigned and the frequencies of the major lignin linkages were quantitatively compared. Considering the structural characteristics and molecular weights of the lignin as well as enzymatic saccharification ratio of the substrate, the combination of autohydrolysis and organic base-catalyzed ethanol pretreatment was deemed as a promising biorefinery mode in the future based on bamboo feedstock.

Effect of dilute alkaline pretreatment on the conversion of different parts of corn stalk to fermentable sugars and its application in acetone-butanol-ethanol fermentation

To investigate the effect of dilute alkaline pretreatment on different parts of biomass, corn stalk was separated into flower, leaf, cob, husk and stem, which were treated by NaOH in range of temperature and chemical loading. The NaOH-pretreated solid was then enzymatic hydrolysis and used as the substrate for batch acetone-butanol-ethanol (ABE) fermentation. The results demonstrated the five parts of corn stalk could be used as potential feedstock separately, with vivid performances in solvents production. Under the optimized conditions towards high product titer, 7.5g/L, 7.6g/L, 9.4g/L, 7g/L and 7.6g/L of butanol was obtained in the fermentation broth of flower, leaf, cob, husk and stem hydrolysate, respectively. Under the optimized conditions towards high product yield, 143.7g/kg, 126.3g/kg, 169.1g/kg, 107.7g/kg and 116.4g/kg of ABE solvent were generated, respectively.

Comparison of ultrasound-assisted Fenton reaction and dilute acid-catalysed steam explosion pretreatment of corncobs: cellulose characteristics and enzymatic saccharification

As an emerging method for lignocellulose pretreatment, the ultrasound-assisted Fenton reaction is not well developed in comparison to the dilute acid-catalysed steam explosion.

Effects of water states on steam explosion of lignocellulosic biomass

The work aimed to identify the complexity and roles of water states in steam explosion process of corn stalk to enhance the treatment efficiency. Results showed that two main water states with different mobility existed in corn stalk and influenced steam explosion treatment. By correlating dynamic water states data to feedstock mechanical properties and treatment process characteristics, the bound water being the excellent plasticizer that reduced the mechanical strength of fibers by over 30%, was conducive to treatment; while, the free water presenting buffering effects in treatment by hindering heat transfer which was reflected by the increase of temperature rising time by 1.29 folds and steam consumption by 2.18 folds, was not conducive. The distinguished point of these two waters was fiber saturated point. By considering treatment efficacy and energy consumption, the significance of fiber saturated point was highlighted as the optimal water states for steam explosion of corn stalk.

A new magnesium bisulfite pretreatment (MBSP) development for bio-ethanol production from corn stover

This study established a new more neutral magnesium bisulfate pretreatment (MBSP) using magnesium bisulfate as sulfonating agent for improving the enzymatic hydrolysis efficiency of corn stover. Using the MBSP with 5.21% magnesium bisulfate, 170°C and pH 5.2 for 60 min, about 90% of lignin and 80% of hemicellulose were removed from biomass and more than 90% cellulose conversion of substrate was achieved after 48 h hydrolysis. About 6.19 kg raw corn stover could produce 1 kg ethanol by Saccharomyces cerevisiae. Meanwhile, MBSP also could protect sugars from excessive degradation, prevent fermentation inhibition formation and directly convert the hemicelluloses into xylooligosaccharides as higher-value products. These results suggested that the MBSP method offers an alternative approach to the efficient conversion of nonwoody lignocellulosic biomass to ethanol and had broad space for development.

Rapid determination of chemical composition and classification of bamboo fractions using visible-near infrared spectroscopy coupled with multivariate data analysis

BACKGROUND

During conversion of bamboo into biofuels and chemicals, it is necessary to efficiently predict the chemical composition and digestibility of biomass. However, traditional methods for determination of lignocellulosic biomass composition are expensive and time consuming. In this work, a novel and fast method for quantitative and qualitative analysis of chemical composition and enzymatic digestibilities of juvenile bamboo and mature bamboo fractions (bamboo green, bamboo timber, bamboo yellow, bamboo node, and bamboo branch) using visible-near infrared spectra was evaluated.

RESULTS

The developed partial least squares models yielded coefficients of determination in calibration of 0.88, 0.94, and 0.96, for cellulose, xylan, and lignin of bamboo fractions in raw spectra, respectively. After visible-near infrared spectra being pretreated, the corresponding coefficients of determination in calibration yielded by the developed partial least squares models are 0.994, 0.990, and 0.996, respectively. The score plots of principal component analysis of mature bamboo, juvenile bamboo, and different fractions of mature bamboo were obviously distinguished in raw spectra. Based on partial least squares discriminant analysis, the classification accuracies of mature bamboo, juvenile bamboo, and different fractions of bamboo (bamboo green, bamboo timber, bamboo yellow, and bamboo branch) all reached 100 %. In addition, high accuracies of evaluation of the enzymatic digestibilities of bamboo fractions after pretreatment with aqueous ammonia were also observed.

CONCLUSIONS

The results showed the potential of visible-near infrared spectroscopy in combination with multivariate analysis in efficiently analyzing the chemical composition and hydrolysabilities of lignocellulosic biomass, such as bamboo fractions.

Facilitating the enzymatic saccharification of pulped bamboo residues by degrading the remained xylan and lignin-carbohydrates complexes

Kraft pulping was performed on bamboo residues and its impact on the chemical compositions and the enzymatic digestibility of the samples were investigated. To improve the digestibility of sample by degrading the xylan and lignin-carbohydrates complexes (LCCs), xylanase and α-L-arabinofuranosidase (AF) were supplemented with cellulase. The results showed more carbohydrates were remained in the samples pulped with low effective alkali (EA) charge, compared to conventional kraft pulping. When 120 IU/g xylanase and 15 IU/g AF were supplemented with 20 FPU/g cellulase, the xylan degradation yield of the sample pulped with 12% EA charge increased from 68.20% to 88.35%, resulting in an increased enzymatic saccharification efficiency from 58.98% to 83.23%. The amount of LCCs in this sample decreased from 8.63/100C9 to 2.99/100C9 after saccharification with these enzymes. The results indicated that degrading the remained xylan and LCCs in the pulp could improve its enzymatic digestibility.

Benefits from additives and xylanase during enzymatic hydrolysis of bamboo shoot and mature bamboo

Effects of additives (BSA, PEG 6000, and Tween 80) on enzymatic hydrolysis of bamboo shoot and mature bamboo fractions (bamboo green, bamboo timber, bamboo yellow, bamboo node, and bamboo branches) by cellulases and/or xylanase were evaluated. The addition of additives was comparable to the increase of cellulase loadings in the conversion of cellulose and xylan in bamboo fractions. Supplementation of xylanase (1 mg/g DM) with cellulases (10 FPU/g DM) in the hydrolysis of bamboo fractions was more efficient than addition of additives in the production of glucose and xylose. Moreover, addition of additives could further increase the glucose release from different bamboo fractions by cellulases and xylanase. Bamboo green exhibited the lowest hydrolyzability. Almost all of the polysaccharides in pretreated bamboo shoot fractions were hydrolyzed by cellulases with the addition of additives or xylanase. Additives and xylanase showed great potential for reducing cellulase requirement in the hydrolysis of bamboo.

Comparison of aqueous ammonia and dilute acid pretreatment of bamboo fractions: Structure properties and enzymatic hydrolysis

The effect of two pretreatments methods, aqueous ammonia (SAA) and dilute acid (DA), on the chemical compositions, cellulose crystallinity, morphologic change, and enzymatic hydrolysis of bamboo fractions (bamboo yellow, timber, green, and knot) was compared. Bamboo fractions with SAA pretreatment had better hydrolysability than those with DA pretreatment. High crystallinity index resulted in low hydrolysis yield in the conversion of SAA pretreated bamboo fractions, not DA pretreated fractions. The increase of cellulase loading had modestly positive effect in the hydrolysis of both SAA and DA pretreated bamboo fractions, while supplement of xylanase significantly increased the hydrolysis of the pretreated bamboo fractions, especially after SAA pretreatment. The results indicated that SAA pretreatment was more effective than DA pretreatment in conversion of bamboo fractions, and supplementation of xylanase was necessary in effective conversion of the SAA pretreated fractions into fermentable sugars.

Fabrication of superhydrophobic bamboo timber based on an anatase TiO2 film for acid rain protection and flame retardancy

A facile method for fabricating superhydrophobic bamboo timber based on an anatase TiO₂ film for acid rain protection and flame retardancy is described in the present work.

Evaluation of aqueous ammonia pretreatment for enzymatic hydrolysis of different fractions of bamboo shoot and mature bamboo

The production of fermentable sugars from different fractions of bamboo shoots and mature bamboos (Phyllostachys heterocycla var. pubescens) by cellulase and/or xylanase was investigated. Aqueous ammonia pretreatment exhibited high but different delignification capacities for different bamboo fractions. Supplementation of cellulases with xylanase synergistically improved the glucose and xylose yields of mature bamboo fractions. High hydrolyzability was observed in the hydrolysis of both non-pretreated and pretreated bamboo shoot fractions, suggesting pretreatment was not necessary for the hydrolysis of bamboo shoots. High hydrolyzability together with the advantages of low lignin content, fast growth, and widely distribution demonstrated that bamboo shoots were excellent lignocellulosic materials for the production of bioethanol and other biochemicals.

Isolation, structural characterization, and potential applications of hemicelluloses from bamboo: a review

Bamboo is one of the mostly fast growing natural resources and has great potential to be used as a valuable feedstock for biorefinery. The hemicelluloses, next to cellulose, represent a diverse group of polysaccharides in plant cell wall. Elucidation and understanding of the hemicelluloses from bamboo play an important role in the efficient conversion of bamboo into biofuels and bioproducts. This review summarized the recent reports on hemicelluloses from bamboo, including immunohistochemical localization, focused on extraction and purification methods, chemical components, characterization of structural features, as well as physicochemical properties. In addition, attention was also paid to derivatives prepared from bamboo hemicelluloses and to potential applications of bamboo hemicelluloses in a variety of areas such as biomaterials, biofuel, and food.

Bamboo: a new source of carbohydrate for biorefinery

Bamboo is perennial woody grass, which distributed widely in the world and belonged to the Gramineae family and Bambuseae subfamily. It may be consider as a candidate lignocellulosic substrate for bio-ethanol production for its environmental benefits and higher annual biomass yield. The conversion of bamboo into bio-ethanol, bio-methane, natural food, flavonoids, and functional xylo-oligosaccharides production were reviewed in this paper. Future prospects for research include pretreatment, enzymatic hydrolysis and fermentation will also be performed to improve the whole process of ethanol production more economical. And revealing the molecular regulation mechanism of the fast growth of bamboo will provide chance for improving bamboo or other energy plants biomass yield through genetic engineering.