Economic and environmental assessment of syrup production. Colombian case

Recent progress in microbial fuel cells using substrates from diverse sources

Increasing untreated environmental outputs from industry and the rising human population have increased the burden of wastewater and other waste streams on the environment. The most prevalent wastewater treatment methods include the activated sludge process, which requires aeration and is, therefore, energy and cost-intensive. The current trend towards a circular economy facilitates the recovery of waste materials as a resource. Along with the amount, the complexity of wastewater is increasing day by day. Therefore, wastewater treatment processes must be transformed into cost-effective and sustainable methods. Microbial fuel cells (MFCs) use electroactive microbes to extract chemical energy from waste organic molecules to generate electricity via waste treatment. This review focuses use of MFCs as an energy converter using wastewater from various sources. The different substrate sources that are evaluated include industrial, agricultural, domestic, and pharmaceutical types. The article also highlights the effect of operational parameters such as organic load, pH, current, and concentration on the MFC output. The article also covers MFC functioning with respect to the substrate, and the associated performance parameters, such as power generation and wastewater treatment matrices, are given. The review also illustrates the success stories of various MFC configurations. We emphasize the significant measures required to fill in the gaps related to the effect of substrate type on different MFC configurations, identification of microbes for use as biocatalysts, and development of biocathodes for the further improvement of the system. Finally, we shortlisted the best performing substrates based on the maximum current and power, Coulombic efficiency, and chemical oxygen demand removal upon the treatment of substrates in MFCs. This information will guide industries that wish to use MFC technology to treat generated effluent from various processes.

Performance of Yeast Microbial Fuel Cell Integrated with Sugarcane Bagasse Fermentation for COD Reduction and Electricity Generation

The purpose of this analysis is to evaluate the efficiency of the Microbial Fuel Cell (MFC) system incorporated with the fermentation process, with the aim of reducing COD and generating electricity, using sugarcane bagasse extract as a substrate, in the presence and absence of sugarcane fibers. There is a possibility of turning bagasse extract into renewable bioenergy to promote the sustainability of the environment and energy. As a result, the integration of liquid fermentation (LF) with MFC has improved efficiency compared to semi-solid state fermentation (S-SSF). The maximum power generated was 14.88 mW/m2, with an average COD removal of 39.68% per cycle. The variation margin of the liquid fermentation pH readings remained slightly decrease, with a slight deflection of +0.14 occurring from 4.33. With the absence of bagasse fibers, biofilm can grow freely on the anode surface so that the transfer of electrons is fast and produces a relatively high current. Experimental data showed a positive potential after an effective integration of the LF and MFC systems in the handling of waste. The product is then simultaneously converted into electrical energy. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Valorization of papaya (Carica papaya L.) agroindustrial waste through the recovery of phenolic antioxidants by supercritical fluid extraction

In this work, supercritical fluid extraction (SFE) for the recovery of phenolic antioxidants from papaya agroindustrial waste (seeds) was explored, making use of neat supercritical CO₂ and CO₂ added with ethanol (CO₂-EtOH). A full factorial design played on in order to evaluate the effect of CO₂ extraction parameters (temperature between 40 and 60 °C, and pressure between 10 and 30 MPa) on yield and total phenols content (TPC), then ethanol was applied as a co-solvent and its effect on the recovery of phenolics was analyzed. The SFE was compared to the conventional extraction using ethanol. The antioxidant activity of all extracts was evaluated, and the phenolic composition in selected extracts was assessed by HPLC-ESI-MS. The highest extraction yields (21.02-26.46%) and TPC (15.34-34.23 mgGAE/g) were found in extracts obtained with CO₂-EtOH and ethanol. Good and selective phenolic recovery was obtained by using CO₂-EtOH, (44.81% of TPC recovered). The CO₂-EtOH extracts showed high radical scavenging activity and higher antioxidant effect against lipid oxidation. Some phenolic acids and flavonoids were observed in the extracts with better antioxidants properties. The results showed that SFE is a suitable green technology for the phenolic recovery from papaya agroindustrial waste, and also an alternative for its valorization.

Bioactive Phenolic Compounds from the Agroindustrial Waste of Colombian Mango Cultivars 'Sugar Mango' and 'Tommy Atkins'-An Alternative for Their Use and Valorization

The aim of this study was to explore the potential of the agroindustrial waste from two Colombian mango cultivars as sources of bioactive phenolic compounds. Phenolic extracts from mango waste (peels, seed coats, and seed kernels) of ‘sugar mango’ and ‘Tommy Atkins’ cultivars were obtained. The bioactive properties of the phenolic extracts were accessed by measuring their free radical scavenging activity and antioxidant effects against lipid oxidation in food products; moreover, their antiproliferative effects against some cell lines of human cancer were explored. It is observed that the agroindustrial waste studied provides promising sources of bioactive phenolics. ‘Sugar mango’ waste provided extracts with the highest antioxidant effect in food products and antiproliferative activity; these extracts reduced lipid oxidation and cell growth by more than 57% and 75%, respectively. The seed kernel from ‘sugar mango’ supplied the extract with the best bioactive qualities; in addition, some recognized bioactive phenolics (such as mangiferin and several galloyl glucosides) were observed in this extract and related with its properties. The results obtained suggest that ‘sugar mango’ waste may be considered a source of bioactive phenolics, with promising uses in food and pharmaceutical products. Thus, a suitable alternative for the use and valorization of agroindustrial waste from Colombian mango cultivars is presented.

Techno-economic and environmental assessment of biogas production from banana peel (Musa paradisiaca) in a biorefinery concept

Two scenarios for the biogas production using Banana Peel as raw material were evaluated. The first scenario involves the stand-alone production of biogas and the second scenario includes the biogas production together with other products under biorefinery concept. In both scenarios, the influence of the production scale on the process economy was assessed and feasibility limits were defined. For this purpose, the mass and energy balances were established using the software Aspen Plus along with kinetic models reported in the literature. The economic and environmental analysis of the process was performed considering Colombian economic conditions. As a result, it was found that different process scales showed great potential for biogas production. Thus, plants with greater capacity have a greater economic benefit than those with lower capacity. However, this benefit leads to high-energy consumption and greater environmental impact.

A biorefinery for efficient processing and utilization of spent pulp of Colombian Andes Berry (Rubus glaucus Benth.): Experimental, techno-economic and environmental assessment

This work investigated a model biorefinery for producing phenolic compounds extract, ethanol and xylitol from spent blackberry pulp (SBP). The biorefinery was investigated according to four potential scenarios including mass and heat integrations as well as cogeneration system for supplying part of the energy requirements in the biorefinery. The investigated SBP had 61.54% holocellulose; its total phenolic compounds was equivalent to 2700mg of gallic acid/100g SBP, its anthocyanins content was 126.41mg/kg of SBP and its total antioxidant activity was 174.8μmol TE/g of SBP. The economic analysis revealed that the level of integration in the biorefinery significantly affected the total production cost. The sale-to-total-production-cost ratio indicated that both, mass and heat integrations are of importance relevance. The cost of supplies (enzymes and reagents) had the most significant impact on the total production cost and accounted between 46.72 and 58.95% of the total cost of the biorefinery.

Adaptation and transcriptome analysis of Aureobasidium pullulans in corncob hydrolysate for increased inhibitor tolerance to malic acid production

Malic acid is a dicarboxylic acid widely used in the food industry, and is also a potential C4 platform chemical. Corncob is a low-cost renewable feedstock from agricultural industry. However, side-reaction products (furfural, 5-hydroxymethylfurfural (HMF), formic acid, and acetic acid) that severely hinder fermentation are formed during corncob pretreatment. The process for producing malic acid from a hydrolysate of corncob was investigated with a polymalic acid (PMA)-producing Aureobasidium pullulans strain. Under the optimal hydrolysate sugar concentration 110 g/L, A. pullulans was further adapted in an aerobic fibrous bed bioreactor (AFBB) by gradually increasing the sugar concentration of hydrolysate. After nine batches of fermentation, the production and productivity of malic acid reached 38.6 g/L and 0.4 g/L h, respectively, which was higher than that in the first batch (27.6 g/L and 0.29 g/L h, respectively). The adapted strain could grow under the stress of 0.5 g/L furfural, 3 g/L HMF, 2g/L acetic acid, and 0.5 g/L formic acid, whereas the wild type did not. Transcriptome analysis revealed that the differentially expressed genes were related to carbohydrate transport and metabolism, lipid transport and metabolism, signal transduction mechanism, redox metabolism, and energy production and conversion under 0.5 g/L furfural and 3 g/L HMF stress conditions. In total, 42 genes in the adapted strain were upregulated by 15-fold or more, and qRT-PCR also confirmed that the expression levels of key genes (i.e. SIR, GSS, CYS, and GSR) involved in sulfur assimilation pathway were upregulated by over 10-fold in adapted strain for cellular protection against oxidative stress.