Lipase immobilized catalytically active membrane for synthesis of lauryl stearate in a pervaporation membrane reactor

Prospecting cellulose fibre-reinforced composite membranes for sustainable remediation and mitigation of emerging contaminants

Many environmental pollutants caused by uncontrolled urbanization and rapid industrial growth have provoked serious concerns worldwide. These pollutants, including toxic metals, dyes, pharmaceuticals, pesticides, volatile organic compounds, and petroleum hydrocarbons, unenviably compromise the water quality and manifest a severe menace to aquatic entities and human beings. Therefore, it is of utmost importance to acquaint bio-nanocomposites with the capability to remove and decontaminate this extensive range of emerging pollutants. Recently, considerable emphasis has been devoted to developing low-cost novel materials obtained from natural resources accompanied by minimal toxicity to the environment. One such component is cellulose, naturally the most abundant organic polymer found in nature. Given bio-renewable sources, natural abundance, and impressive nanofibril arrangement, cellulose-reinforced composites are widely engineered and utilized for multiple applications, such as wastewater decontamination, energy storage devices, drug delivery systems, paper and pulp industries, construction industries, and adhesives, etc. Environmental remediation prospective is among the fascinating application of these cellulose-reinforced composites. This review discusses the structural attributes of cellulose, types of cellulose fibrils-based nano-biocomposites, preparatory techniques, and the potential of cellulose-based composites to remediate a diverse array of organic and inorganic pollutants in wastewater.

Porous PVA-g-SPA/PVA-SA Catalytic Composite Membrane via Lyophilization for Esterification Enhancement

A catalytic composite membrane was developed for the enhancement of esterification by lyophilization for the first time. The catalytic composite membrane was composed of a poly(vinyl alcohol) (PVA)-sodium alginate (SA) separation layer and a spongy porous catalytic layer cross-linked by PVA and 4-sulfophthalic acid (SPA). Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) results indicated the successful synthesis of the catalytic composite membrane. The membrane properties were evaluated by ethanol dehydration and esterification. The conversion rate of acetic acid reached 95.9% after 12 h. Compared with batch reactions, the conversion rate increased by 24.4%. After five cycles, the membrane still maintained outstanding catalytic activity. The resistance of mass transfer was analyzed, and the results showed that the porous structure reduced the catalytic layer resistance to total resistance from 70.27 to 32.88%. The composite membrane with a spongy porous catalytic layer exhibited superior dehydration and catalytic performance.

Functional catalytic membrane development: A review of catalyst coating techniques

Catalytic membranes combine catalytic activity with conventional filtration membranes, thus enabling diverse attractive benefits into the conventional membrane filtration processes, such as easy catalyst reuse, antifouling, anti-microbial, and enhancing process efficiency. Up to date, tremendous progresses have been made on functional catalytic membrane preparation and applications, which significantly advances the competitiveness of membrane technologies in process industries. The present article provides a critical and holistic overview of the current state of knowledge on existing catalyst coating techniques for functional catalytic membrane development. Based on coating mechanisms, the techniques are generally categorized into physical and chemical surface coating routes. For each technique, we first introduce fundamental principle, followed by a critical discussion of their applications with representative case studies. Advantages and drawbacks are also emphasized for different surface coating technologies. Finally, future perspectives are highlighted to provide deep insights into their future developments.

Enhanced hydrolysis of cellulose by catalytic polyethersulfone membranes with straight-through catalytic channels

The aim of this study was to prepare sulfonated graphene oxide/polyether sulfone (GO-SO₃H/PES) mixed matrix membranes (GPMMMs) with high porosity and straight-through catalytic channels by segregation and used for dynamic and continuous hydrolysis of cellulose. The high porosity and segregation increased the exposure of catalysts synergistically and the formative GO-SO₃H enriched, straight-through catalytic channels had higher catalytic performance, enhancing the diffusion of hydrolytic products. Dynamic hydrolysis of cellulose is more efficient than static hydrolysis due to the enhanced contact between cellulose and catalysts achieved by the extra driving forces, and the further degradation of produced saccharides was suppressed due to the high freedom of products. The TRS reached 98.18% after 1 h at 150 °C with a catalyst/cellulose mass ratio of 1:5. More importantly, the immobilization of GO-SO₃H by PES improved its stability and reusability at high reaction temperature. This strategy provides guidance to the design of high-performance catalytic membranes.

Chemical and bio-chemical reactions assisted by pervaporation technology

Since several decades ago, the application of pervaporation (PV) technology has been mainly aimed at the separation of different types of water-organic, organic-water and organic-organic mixtures, reaching its large-scale application in industry for the dehydration of organics. Today, the versatility and high selectivity toward specific compounds have led its consideration to other types of application such as the assisted chemical and bio-chemical reactions. The focus of this review is to provide a compelling overview on the recent developments of PV combined with chemical and bio-chemical reactions. After a general introduction of PV and its theoretical background, particular emphasis is given to the results obtained in the field for different reactions considered, identifying the key features and weak points of PV in such particular applications. Furthermore, future trends and perspectives are also addressed according to the latest literature reports.

Immobilization of Moniliella spathulata R25L270 Lipase on Ionic, Hydrophobic and Covalent Supports: Functional Properties and Hydrolysis of Sardine Oil

The oleaginous yeast Moniliella spathulata R25L270 was the first yeast able to grow and produce extracellular lipase using Macaúba (Acrocomia aculeate) cake as substrate. The novel lipase was recently identified, and presented promising features for biotechnological applications. The M. spathulata R25L270 lipase efficiently hydrolyzed vegetable and animal oils, and showed selectivity for generating cis-5,8,11,15,17-eicosapentaenoic acid from sardine oil. The enzyme can act in a wide range of temperatures (25–48 °C) and pH (6.5–8.4). The present study deals with the immobilization of M. spathulata R25L270 lipase on hydrophobic, covalent and ionic supports to select the most active biocatalyst capable to obtain omega-3 fatty acids (PUFA) from sardine oil. Nine immobilized agarose derivatives were prepared and biochemically characterized for thermostability, pH stability and catalytic properties (K_M and V_max). Ionic supports improved the enzyme–substrate affinity; however, it was not an effective strategy to increase the M. spathulata R25L270 lipase stability against pH and temperature. Covalent support resulted in a biocatalyst with decreased activity, but high thermostability. The enzyme was most stabilized when immobilized on hydrophobic supports, especially Octyl-Sepharose. Compared with the free enzyme, the half-life of the Octyl-Sepharose derivative at 60 °C increased 10-fold, and lipase stability under acidic conditions was achieved. The Octyl-Sepharose derivative was selected to obtain omega-3 fatty acids from sardine oil, and the maximal enzyme selectivity was achieved at pH 5.0.

Efficient regioselective acylation of quercetin using Rhizopus oryzae lipase and its potential as antioxidant

The present investigation describes the regioselective enzymatic acylation of quercetin with ferulic acid using Rhizopus oryzae lipase. Optimization of reaction parameters resulted in 93.2% yield of the ester synthesized using 750IU of lipase in cyclo-octane at a temperature of 45°C. The reaction was successfully carried out upto 25g scale. The ester synthesized was analyzed by (1)H Nuclear magnetic resonance spectroscopy. The ester synthesized (quercetin ferulate) showed higher antiradical activity as compared to ascorbic acid using the 2,2-diphenyl-1-picrylhydrazyl radical method. These results on enzyme-catalyzed acylation of quercetin might be used to prepare and scale-up other flavonoids derivatives.

Synthesis of benzyl cinnamate by enzymatic esterification of cinnamic acid

In this study, lipase catalysis was successfully applied in synthesis of benzyl cinnamate through esterification of cinnamic acid with benzyl alcohol. Lipozyme TLIM was found to be more efficient for catalyzing this reaction than Novozym 435. In order to increase the yield of benzyl cinnamate, several media, including acetone, trichloromethane, methylbenzene, and isooctane, were used in this reaction. The reaction showed a high yield using isooctane as medium. Furthermore, the effects of several parameters such as water activity, reaction temperature, etc, on this reaction were analyzed. It was pointed out that too much benzyl alcohol would inhibit lipase activity. Under the optimum conditions, lipase-catalyzed synthesis of benzyl cinnamate gave a maximum yield of 97.3%. Besides, reusable experiment of enzyme demonstrated that Lipozyme TLIM retained 63% of its initial activity after three cycles. These results were of general interest for developing industrial processes for the preparation of benzyl cinnamate.