Microbial community related to lysozyme digestion process for boosting waste activated sludge biodegradability

Effect of lysozyme combined with hydrothermal pretreatment on excess sludge and anaerobic digestion

Anaerobic digestion (AD) is widely employed for sludge stabilization and waste reduction. However, the slow hydrolysis process hinders methane production and leads to prolonged sludge issues. In this study, an efficient and eco-friendly lysozyme pre-treatment method was utilized to address these challenges. By optimizing lysozyme dosage, hydrolysis and cell lysis were maximized. Furthermore, lysozyme combined with hydrothermal pretreatment enhanced overall efficiency. Results indicate that: (1) When lysozyme dosage reached 90 mg/g TS after 240 min of pretreatment, SCOD, soluble polysaccharides, and protein content reached their maxima at 855.00, 44.09, and 204.86 mg/L, respectively. This represented an increase of 85.87%, 365.58%, and 259.21% compared to the untreated sludge. Three-dimensional fluorescence spectroscopy revealed the highest fluorescence intensity in the IV region (soluble microbial product), promoting microbial metabolic activity. (2) Lysozyme combined with hydrothermal pretreatment significantly increased SCOD, soluble proteins, and polysaccharide release from sludge, reducing SCOD release time. Orthogonal experiments identified Group 3 as the most effective for SCOD and soluble polysaccharide release, while Group 9 released the most soluble proteins. The significance order of factors influencing SCOD, soluble proteins, and polysaccharide release is hydrothermal temperature > hydrothermal time > enzymatic digestion time.(3) The lysozyme-assisted hydrothermal pretreatment group exhibited the fastest release and the highest SCOD concentration of 8,135.00 mg/L during anaerobic digestion. Maximum SCOD consumption and cumulative gas production increased by 95.89% and 130.58%, respectively, compared to the control group, allowing gas production to conclude 3 days earlier.

Effect of rhamnolipid on the performance of compound thermophilic bacteria agent pretreatment system for waste sludge hydrolysis

This study innovatively introduced rhamnolipid (RL) to compound thermophilic bacteria (TB) agent pretreatment system for further accelerating the waste sludge hydrolysis and substrates transformation. The results showed that combined pretreatment was beneficial for the sludge extracellular polymers (EPS) rupture and dissolved organic matters (DOM) release. In the optimal dosage of 40 mg/g SS RL, the activities of protease and α-glucosidase increased by 20.7 % and 33.3 % than that without RL addition, respectively. The addition of RL enhanced efficient contacts between hydrolases and organic substrates, and excitation emission matrix (EEM) spectrum revealed that combined pretreatment with 40 mg/g SS RL could achieve higher soluble microbial by-products occupancy (54 %) and lower fulvic acid-like substances (6 %) occupancy in DOM, promoting the waste sludge biodegradability. High organics availability conducted to more shifts in microbial community structure, compared with TB agent pretreatment, the relative abundance of genus Geobacillus and norank_f__Synergistaceae were enhanced by 29.08 and 0.33 times in combined pretreatment system, respectively, which was conducive to sludge hydrolysis and subsequent anaerobic fermentation process.

Endogenous biopolymer hydrolysis for enhancing short-chain fatty acids recovery from excess sludge: Combination of lysozyme-catalyzing and cation exchange resin-mediated metal regulation

In decades, anaerobic fermentation with short-chain fatty acids (SCFAs) recovery from excess sludge have attained rising attention. However, rigid particulate organic matter (POMs) structure with slow hydrolysis limited anaerobic fermentation performance of excess sludge. Remarkable sludge hydrolysis performance was supposed to be achievable by the synchronous EPS repture and microbial cell lysis. This study clarified the improvement of overall anaerobic fermentation performance by combination treatment of lysozyme (Lyso) catalysis and metal regulation (MR). The Lyso + MR treatment triggered EPS rupture by protein structure deflocculation while catalyzing microbial cell lysis, which promoted massive extracellular and intracellular POMs hydrolysis. As a result, a significant amount of SCOD (5646.67 mg/L) was produced. Such endogenous organic matters hydrolysis led to considerable SCFAs accumulation (3651.14 mg COD/L) through 48-h anaerobic fermentation at 1.75 g/g SS cation-exchange resin and Lyso dosage of 10% (w/w), which was 5.945 times higher than that in the control. Additionally, it suggested that most of the recovered SCFAs remained in fermentative liquid after chemical conditioning and mechanical dewatering towards solid-liquid separation, which provided considerable economic benefit of 363.6-1059.1 CNY/ton SS.

Enhanced acidogenic fermentation from Al-rich waste activated sludge by combining lysozyme and sodium citrate pretreatment: Perspectives of Al stabilization and enzyme activity

The accumulation of poly aluminum chloride (PAC) in dewatered waste activated sludge (WAS) can cause severe Al pollution and significantly reduce the production of volatile fatty acids (VFAs) from anaerobic fermentation. Herein, the combination of lysozyme and sodium citrate pretreatment was applied to stabilize the aluminum and enhance the VFAs production via anaerobic fermentation. The complexation and stabilization of aluminum by the citrate was efficient, which is conducive to relieving the inhibition of aluminum on lysozymes and other extracellular hydrolases. Compared with the control group, the lysozyme, protease and α-glucosidase activities were obtained at 1.86, 1.72, and 1.15 times, respectively, following the pretreatment. 129.71 mg/g volatile suspended solids (VSS) of soluble proteins and 26.3 mg/g VSS of polysaccharides were obtained within 4 h, together with the degradation of 124 % more proteins and 75 % more polysaccharides within three days. This provided a sufficient number of substrates for VFA production. 588.4 mg COD/g VSS of total VFAs were obtained after the six-day anaerobic fermentation from Al-rich WAS following the combination of lysozyme and sodium citrate pretreatment, which was 7.3 times higher than that of the control group. This study presents a novel approach for enhancing VFA production in anaerobic fermentation as well as reducing risk of Al hazards from Al-rich WAS.

Mitigating methane emission from oil sands tailings using enzymatic and lime treatments

Engineering strategies to reduce greenhouse gases (GHGs) emissions by inhibiting methanogenesis in oil sands tailings have rarely been examined. In this study, we explored the potential impact of chemical treatment (lime) and biological treatment using enzymes (lysozyme and protease) on inhibiting methane emissions from tailings. Overall, treatment with protease 3%, lysozyme 3%, and lime 5000 ppm reduced CH₄ production (by 52%, 28%, and 25%, respectively) and were weakly associated with the archaeal abundance. Enzymes treatment resulted in a higher reduction in CH₄ production compared with lime treatment. A 3% lysozyme treatment suppressed CH₄ production (the change in methane was 0.48 mmol) and reduced the degradation of hexane throughout the experiment. Similarly, 3% protease suppressed CH₄ production throughout the experiment (the change in methane was 0.78 mmol), which could be attributed to the pH reduction to pH 4.9 at week 23 resulting from the formation of volatile fatty acids. Another possible mechanism could be the formation of toxic compounds, such as high nitrogen content, after protease treatment that inhibited the microbial community. The toxicity effect to Vibrio fischeri was greater with lysozyme 3% and protease 3% treatment than with lime treatment (124 TU and 76 TU, respectively). Lime treatment resulted in the highest reduction in 16S rRNA gene copies from 5.7 × 10⁶ cells g^-1 (control) to 2.7 × 10⁵, 1.71 × 10⁵, and 1.4 × 10⁵ cells g^-1 for 1600, 3500, and 5000 ppm treatments, respectively. This study supports further work to examine and determine the optimum conditions (e.g., enzyme and lime dosages) for CH₄ inhibition.

Maximizing electron flux, microbial diversity and gene abundance in MFC powered electro-Fenton system by optimizing co-addition of lysozyme and 2-bromoethanesulfonate

In this study, a microbial fuel cell powered electro-Fenton system (MFCⓅEFs) was established in order to overcome the shortcomings of low electron flux and unexpected methane production, while simultaneously treating excess sludge (ES, substrate) and refractory syringic acid (SA). A strategy of co-adding lysozyme (LZ, as ES degradation catalyst) and 2-bromoethanesulfonate (BES, as methane inhibitor) into ES was optimized in MFCⓅEFs to maximize electron flux, microbial community diversity and functional gene abundance. The removal of sludge total chemical oxygen demand (TCOD) achieved 81.69% in 25 d under an optimal co-addition strategy (40.41 mg/gSS of LZ, 27.03 mmol/L of BES, adding on 22.8 h of the7th day), with a simultaneous high degradation of SA (99.30% in 25 h). Correspondingly, a maximum power density of 3.35 W/m³ was achieved (only 0.62 W/m³ from the control), which effectively realizes in-situ micro-electricity generation and utilization for bioelectric Fenton processes. Moreover, 42.25% of the total charges were employed for bio-electricity generation. The electricigens of Pseudomonas, Acinetobacter and Chlorobium showed effective enrichment, while the abundance of methanogenesis archaea was extremely decreased. Functional genes associated with methanogenesis including mtaA, hdra, and mcrA were effectively inhibited. The life cycle assessment along with an optimized co-addition strategy illustrated a beneficial environmental effect, particularly in terms of ecosystem quality and climate change. Above all, an enhanced synchronous degradation of excess sludge and refractory pollutants had been realized in a green and environmentally friendly way.

Impact of divalent cations on lysozyme-induced solubilisation of waste-activated sludge: Perspectives of extracellular polymeric substances and surface electronegativity

Lysozyme hydrolysis can accelerate waste-activated sludge (WAS) solubilisation, which can significantly shorten the process and promote the efficiency of anaerobic digestion. This study investigated the impact of divalent cations on lysozyme-induced solubilisation of WAS. The performance of lysozyme pretreatment was dramatically inhibited by Mg²⁺ and Ca²⁺. Compared to the control group, the amount of net SCOD, protein, and polysaccharides released to the supernatant were reduced by 36.6%, 44.7%, and 35.8%, respectively, in the presence of divalent cations. The extracellular polymeric substance (EPS) matrix became tightly bound, resulting in fewer proteins and polysaccharides being extracted from loosely-bound EPS (LB-EPS) with divalent cations, which was detrimental to the solubilisation of WAS. Divalent cations decreased the surface electronegativity of sludge particles and prolonged the adsorption of lysozymes by sludge flocs. More than 16.6% of total lysozymes remained in the liquid phase of WAS after 240 min Mg²⁺ and Ca²⁺ strengthened the binding among proteins and polysaccharides and promoted the intermolecular cross-linking of polysaccharides. The EPS matrix formed a dense spatial reticular structure that blocked the transfer of lysozymes from the EPS matrix to the pellet. As a result, the lysozymes accumulated in LB-EPS rather than hydrolysing the microorganism's cell wall. This study provides a new perspective on the restriction of WAS pretreatment with lysozymes and optimises the method of lysozyme-induced solubilisation of WAS.

Impact of magnesium ions on lysozyme-triggered disintegration and solubilization of waste activated sludge

Lysozyme can efficiently accelerate solubilization and hydrolysis of waste activated sludge (WAS) for anerobic digestion. However, the effect of lysozyme was easily to be inhibited by metal ions in WAS. The impact of magnesium ions (Mg²⁺) on lysozyme catalyze WAS disintegration was investigated in this study. The effect of lysozyme on WAS hydrolysis could be hindered by Mg²⁺. Relatively high concentrations (>50 mg/L) of Mg²⁺ in sludge significantly reduced the release of soluble polysaccharides and proteins from WAS, while sulfate ions or chloride ions caused no such effect. Proteins were difficult to be extracted from extracellular polymeric substances (EPS) of WAS in the presence of Mg²⁺ (>10 mg/L) due to the divalent cation bridging (DCB) behavior, while the extraction of polysaccharides was not significantly affected. The polysaccharides and proteins in the inner EPS layer were transferred to the outer layer during the lysozyme treatment, and total quantities of both components maintained constantly. At least 23.1% lysozymes were trapped in the liquid phase of 100 mg Mg²⁺/L in the first hour. Mg²⁺ could significantly affect the transfer of lysozyme from liquid phase to the inner layer of sludge. Mg²⁺ neutralized the negative surface charge of the sludge particles, which hindered the absorption of positively charged lysozyme molecules by sludge flocs from the liquid phase. The proteins of TB-EPS had higher ratios of α-helixes and tighter structures than those in LB-EPS, which could impede the lysozyme transfer to the cell wall.

Optimizing temperature for enhancing waste activated sludge decomposition in lysozyme and rhamnolipid pretreatment system

This study investigated the influence of temperature on the hydrolysis and decomposition of waste activated sludge (WAS) during the enhanced pretreatment system with lysozyme and rhamnolipid (Ly + RL). Results showed that temperature increasing from 15℃ to 55℃ could obviously enhance the release of soluble organic matters and WAS decomposition degree within the Ly + RL pretreatment system. Compared to the sum of sole Ly and sole RL pretreatment, Ly + RL combined pretreatment system at 45℃ presented best synergistic hydrolysis performance. The decomposition degree of bacteria and archaea reached 47.6% and 88.1%, respectively. Meanwhile, increasing temperature could recede the diversity of microbial community in the system. Gammaproteobacteria, with the relative abundance of 90.7%, occupied the absolute dominant position at 45℃. Furthermore, with the rise of temperature, more volatile fatty acids were harvested after anaerobic fermentation.

Bioaugmentation mitigates ammonia and hydrogen sulfide emissions during the mixture compost of dewatered sewage sludge and reed straw

This study investigated the effectiveness of bio-augmenting aerobic cell culture to mitigate ammonia and hydrogen sulfide emission in sewage sludge composting amended with reed straw (with the weight ratio of 1:0.3-0.4). During the 20-day aerated lab-scale composting, adding 200-mL culture (56.80 NTU) reduced ammonia and hydrogen sulfide emissions by 38.00% and 54.32%, and conserved total nitrogen and sulfate by 39.42% and 70.75%, respectively. Organic matters degradation was quick started 1 day ahead. Comparing to the control, nitrate content increased 38.75% at the end of the compost. Bioaugmentation evened the distributions of bacterial communities in the thermophilic phase. The shift was mainly due to 22.97% of relative abundance of Proteobacteria depressed and 157.16% of Bacteroidetes increased, which were beneficial for nitrogen conservation and glycan breakdown, respectively. In summary, the results demonstrated that bioaugmentation addition could be an effective strategy for enhanced sludge composting.

Positive effects of zeolite powder on aerobic granulation: Nitrogen and phosphorus removal and insights into the interaction mechanisms

Aerobic granular sludge is considered one of the most promising biological wastewater treatment technologies of the 21st century. However, the long granulation time and poor treatment effect on N and P have severely limited its popularity and large-scale application. In this study, we systematically examine the strengthening effects of zeolite powder on granulation, N and P removal, and their interaction mechanisms. The addition of zeolite powder decreased sludge granulation time to 18 d, and improved average N and P removal rates by 4.48% and 2.22%, respectively. The multi-pore and nutrient-rich environment of the zeolite powder is beneficial for maintaining microbial activity and granular stability. Moreover, its adsorption to N and P enriches their respective removal strains, improving their removal efficiency.

Genetically Encoded Biosensor-Based Screening for Directed Bacteriophage T4 Lysozyme Evolution

Lysozyme is widely used as a model protein in studies of structure–function relationships. Recently, lysozyme has gained attention for use in accelerating the degradation of secondary sludge, which mainly consists of bacteria. However, a high-throughput screening system for lysozyme engineering has not been reported. Here, we present a lysozyme screening system using a genetically encoded biosensor. We first cloned bacteriophage T4 lysozyme (T4L) into a plasmid under control of the araBAD promoter. The plasmid was expressed in Escherichia coli with no toxic effects on growth. Next, we observed that increased soluble T4L expression decreased the fluorescence produced by the genetic enzyme screening system. To investigate T4L evolution based on this finding, we generated a T4L random mutation library, which was screened using the genetic enzyme screening system. Finally, we identified two T4L variants showing 1.4-fold enhanced lytic activity compared to native T4L. To our knowledge, this is the first report describing the use of a genetically encoded biosensor to investigate bacteriophage T4L evolution. Our approach can be used to investigate the evolution of other lysozymes, which will expand the applications of lysozyme.

Hydrolase activity and microbial community dynamic shift related to the lack in multivalent cations during cation exchange resin-enhanced anaerobic fermentation of waste activated sludge

The correlation of the lack in multivalent cations with hydrolase activity and microbial community in anaerobic fermentation of waste activated sludge was investigated in this study. It was demonstrated that considerable solid phase reduction of 41 % (7.87 g/L) was achievable through a cation exchange resin-enhanced anaerobic fermentation of 4 days. The protease and α-glucosidase, especially α-glucosidase, were easily influenced by a lack in multivalent cations. Furthermore, species abundance and diversity of microbial community gradually decreased. Meanwhile, the bacteria community structure presented obvious dynamic shifts. Ruminococcaceae_UCG_009, Bacteroides and Macellibacteroides responsible for organic matter biodegradation and SCFAs production became dominant bacteria in cation exchange resin-enhanced anaerobic fermentation, which was less influenced by the lack in multivalent cations, while the SCFA consumers (e.g. methanogens) were inhibited with reduced abundances due to their susceptibility to the lack in multivalent cations. Redundancy analysis revealed that the lack in multivalent cations were responsible for the microbial community evolution, which was proved by the high Grey relational coefficients (0.747-0.820) and significant negative Spearman coefficients (-0.5798 to -0.9429) between multivalent cation and microbial community. Obviously, the cation exchange resin-induced removal of multivalent cations reduced enzyme activity and modified microbial community structure, which created a beneficial environment for enhancing anaerobic fermentation.

Understanding mechanisms of sludge in situ reduction in anaerobic side-stream reactor coupled membrane bioreactors packed with carriers at different filling fractions

An anoxic/oxic membrane bioreactor (AO) and three pilot-scale anaerobic side stream reactors (ASSR) coupled MBRs (ASSR-MBRs), packed with 0%, 25% and 50% carriers in ASSRs, were continuously operated to study the mechanisms for sludge reduction. Four systems showed efficient COD and NH₄⁺-N removal, while packing carriers significantly enhanced nitrogen removal. 25% filling fraction (AP₂₅) achieved the highest sludge reduction efficiency of 50.5% compared to 0% (21.7%) and 50% (39.7%). Compared to ASSR-MBR, carriers enhanced the release of dissolved organic matters, and accelerated the secretion of enzyme for cell lysis and hydrolysis. In AP₂₅, the presence of carriers prompted the formation of environment propitious to sludge reduction in bulk sludge. AP₂₅ tended to enrich hydrolytic, fermentative and denitrifying bacteria to accelerate hydrolysis process, while excessive carriers had negative effect on biomass stability and movement of carriers.

Effect of NaCl Concentration on Microbiological Properties in NaCl Assistant Anaerobic Fermentation: Hydrolase Activity and Microbial Community Distribution

Previous studies have demonstrated that sludge hydrolysis and short-chain fatty acids (SCFAs) production were improved through NaCl assistant anaerobic fermentation. However, the effect of NaCl concentrations on hydrolase activity and microbial community structure was rarely reported. In this study, it was found that α-glucosidase activity and some carbohydrate-degrading bacteria were inhibited in NaCl tests, owing to their vulnerability to high NaCl concentration. Correspondingly, the microbial community richness and diversity were reduced compared with the control test, while the evenness was not affected by NaCl concentration. By contrast, the protease activity was increased in the presence of NaCl and reached the highest activity at the NaCl concentration of 20 g/L. The protein-degrading and SCFAs-producing bacteria (e.g., Clostridium algidicarnis and Proteiniclasticum) were enriched in the presence of NaCl, which were salt-tolerant.

An innovative alkaline protease-based pretreatment approach for enhanced short-chain fatty acids production via a short-term anaerobic fermentation of waste activated sludge

This study reported a novel pretreatment approach with combination of alkaline protease (AP) and pH 10 for enhancing short-chain fatty acids (SCFAs) production from waste activated sludge (WAS). Through the AP-based pretreatment, WAS flocs were disintegrated with cell lysis, leading to release of biodegradable organic matters. At the external AP dosage of 5%, SCOD of 5363.7 mg/L (SCOD/TCOD = 32.5%) was achievable after 2-h pretreatment. More than 66% of SCOD was composed of proteins and carbohydrates. Considerable SCFAs of 607 mg COD/g VSS was produced over a short-term anaerobic fermentation of 3 days, which was 5.4 times higher than that in the control. Acetic and propionic acids accounted for 74.1% of the SCFAs. The AP-based approach increased endogenous protease and α-glucosidase activities, facilitating biodegradation of dissolved organic matters and SCFAs production. Such approach is promising for WAS disposal and carbon recovery, the produced SCFAs might supply 60% of carbon gap in wastewater.

Immobilization of Phosphatidylserine by Ethanol and Lysozyme on the Cell Surface for Evaluation of Apoptosis-Like Decay in Activated-Sludge Bacteria

Accurate determination of microbial viability can be crucial in microbe-dominated biosystems. However, the identification of metabolic decay in bacterial cells can be elaborate and difficult. We sought to identify apoptosis-like bacterial processes by using annexin V-fluorescein isothiocyanate (FITC) (AVF), a probe typically used to stain phosphatidylserine (PS) on exposed cell membranes. The bacterial cell wall provides a barrier that is responsible for low efficiency of direct PS staining of decayed bacterial cells. This can be overcome by pretreatment of the bacteria with 70% ethanol, which fixates the bacteria and preserves the PS status, combined with lysozyme treatment to hydrolyze the cell wall. That treatment improved the efficiency of AVF staining considerably, as shown for pure strains of an Ochrobactrum sp. and a Micrococcus sp. Using this method, decayed bacterial cells (induced by starvation) were more strongly stained, indicating externalization of PS to a greater extent than seen for cells harvested at logarithmic growth. A multispecies microbial sludge was artificially decayed by heat treatment or alternating anoxic-oxic treatment, which also induced increased AVF staining, again presumably via decay-related PS externalization. The method developed proved to be efficient for identification of bacterial decay and has potential for the evaluation of multispecies bacterial samples from sources like soil matrix, bioaerosol, and activated sludge.IMPORTANCE Since the externalization of phosphatidylserine (PS) is considered a crucial characteristic of apoptosis, we sought to identify apoptosis-like decay in bacterial cells by PS staining using AVF. We show that this is possible, provided the bacteria are pretreated with ethanol plus lysozyme to remove a physical staining barrier and preserve the original, decay-related externalization of PS. Our work suggests that PS externalization occurs in starved bacteria and this can be quantified with AVF staining, providing a measure of bacterial decay. Since PS is the common component of the lipid bilayer in bacterial cell membranes, this approach also has potential for evaluation of cell decay of other bacterial species.

Cation exchange resin-induced hydrolysis for improving biodegradability of waste activated sludge: Characterization of dissolved organic matters and microbial community

This study reported an efficient and green approach towards facilitating hydrolysis of waste activated sludge (WAS) using cation exchange resin (CER) as a recyclable additive. Through CER-mediated removal of multivalent cations, WAS flocs were disintegrated into small particles with extracellular polymeric substance (EPS) solubilization. At CER dosage of 1.75 g/g SS, SCOD increased to 2579 mg/L (SCOD/TCOD = 15.9%) after 8-h hydrolysis. Afterwards, CER displayed further sludge hydrolysis performance lasting 2 days, i.e. SCOD/TCOD = 34.2%. Meanwhile, proteins, carbohydrates and other organics in dissolved organic matters (DOMs) were major contributors for volatile fatty acids (VFAs) accumulation, with composition percentage: VFAs (58.9%) > proteins (21.8%) > other organics (8.8%) > humic acids (5.9%) > carbohydrates (4.4%). The biodegradable tryptophan-like and tyrosine-like proteins were major proteins, while other organics included amino acids, aliphatic and metabolic intermediates. More than 85.2% of DOMs were easily biodegradable. Moreover, CER-induced hydrolysis modified microbial community structure through inhibiting VFAs-utilizing microbes, while hydrolytic-acidogenic bacteria were enriched, responsible for DOMs biodegradation.

An evaluation of lysozyme enzyme and thermal pretreatments on dairy sludge digestion and gas production

Anaerobic digestion is one of the common methods of managing and stabilizing sludge. However, due to the limitations of the biological sludge hydrolysis stage, anaerobic decomposition is slow and requires a long time. This study evaluated the effects of thermal (80 °C) (TH-PRE) and a combination of thermal with the lysozyme enzyme (LTH-PRE) pretreatments on the enhancement of anaerobic activated sludge digestion. Response surface methodology was implemented to optimize enzyme pretreatment conditions (enzyme and mixed liquid suspended solids concentration). The results showed that both pretreatment methods increase soluble chemical oxygen demand (COD) and reduces total and volatile suspended solids (VSS), and phosphate concentration. The COD removal rate in LTH-PRE and TH-PRE was 95% and 81%, respectively. The value of VSS reduction in LTH-PRE and TH-PRE was 41% and 31%, more than the control operation, respectively. The biogas production in LTH-PRE and in TH-PRE also increased by 124% and 96%, respectively.

Hydrolysis and decomposition of waste activated sludge with combined lysozyme and rhamnolipid treatment: Effect of pH

Effect of pH on waste activated sludge (WAS) hydrolysis and decomposition treating with lysozyme and rhamnolipid combined (Ly + RL) was investigated in this study. Results showed that Ly + RL system could significantly improve the release of soluble organic matters at the optimal RL dosage of 0.3 g/gSS and lysozyme dosage of 0.15 g/gSS. Alkali conditions showed better effect than that of acid on the release of soluble organics, improvement of WAS biodegradability and reduction of big floc size within Ly + RL treatment system and the optimal pH was 10. And 9591.6 mg/L soluble chemical oxygen demand (SCOD), 1612.0 mg/L protein and 1211.6 mg/L polysaccharide were released at pH10 after 12 h co-digestion. 83.7% bacteria and 92.2% archaea were decomposed at pH10. Class Gammaproteobacteria (82.4%) was the predominant bacteria after treated by Ly + RL system, and the treated WAS was beneficial for the subsequent organics bio-degradation and volatile fatty acids accumulation.

Enhancement of excess sludge hydrolysis and decomposition by combined lysozyme and rhamnolipid pretreatment

Feasibility of combined lysozyme and rhamolipid (RL) pretreatment on the enhancement of excess sludge (ES) hydrolysis and decomposition was assessed in this study. Results showed lysozyme and RL combined treatment could significantly promote ES hydrolysis and decomposition, an additional 1196.9 mg/L soluble chemical oxygen demand (SCOD), 792.5 mg/L protein and 133.5 mg/L polysaccharide were released compared with the sum of sole RL and sole lysozyme treatment at the optimal RL dosage of 0.3 g/gSS and lysozyme dosage of 0.15 g/gSS after 8 h co-digestion. 45.3% bacteria and 84.5% archaea decomposition degree were gained under the combined treatment at the optimal RL dosage. Class Gammaproteobacteria and genus Methanothrix were the predominant bacteria and archaea with the relative abundance of 72.4% and 60.8%, respectively. After the combined pretreatment, ES was beneficial for volatile fatty acids accumulation and acetic acid dependent methane generating inferred from the results of microbial community composition.

Evaluation of Feasibility of Using the Bacteriophage T4 Lysozyme to Improve the Hydrolysis and Biochemical Methane Potential of Secondary Sludge

Anaerobic digestion (AD) of secondary sludge is a rate-limiting step due to the bacterial cell wall. In this study, experiments were performed to characterize secondary sludges from three wastewater treatment plants (WWTPs), and to investigate the feasibility of using bacteriophage lysozymes to speed up AD by accelerating the degradation of bacterial cell walls. Protein was the main organic material (67.7% of volatile solids in the sludge). The bacteriophage T4 lysozyme (T4L) was tested for hydrolysis and biochemical methane potential. Variations in the volatile suspended solid (VSS) concentration and biogas production were monitored. The VSS reduction efficiencies by hydrolysis using T4L for 72 h increased and ranged from 17.8% to 26.4%. Biogas production using T4L treated sludges increased and biogas production was increased by as much as 82.4%. Biogas production rate also increased, and the average reaction rate coefficient of first-order kinetics was 0.56 ± 0.02/d, which was up to 47.5% higher compared to the untreated samples at the maximum. Alphaproteobacteria, Betaproteobacteria, Flavobacteriia, Gammaproteobacteria, and Sphingobacteriia were major microbial classes in all sludges. The interpretation of the microbial community structure indicated that T4L treatment is likely to increase the rate of cell wall digestion.

A systematic approach re-analyzing the effects of temperature disturbance on the microbial community of mesophilic anaerobic digestion

Microbial communities are key drivers of ecosystem processes, but their behavior in disturbed environments is difficult to measure. How microbial community composition and function respond disturbances is a common challenge in biomedical, environmental, agricultural, and bioenergy research. A novel way to solve this problem is to use a systems-level perspective and describe microbial communities as networks. Based on a mesophilic anaerobic digestion system of swine manure as a tool, we propose a simple framework to investigate changes in microbial communities via compositions, metabolic pathways, genomic properties and interspecies relationships in response to a long-term temperature disturbance. After temperature disturbance, microbial communities tend towards a competitive interaction network with higher GC content and larger genome size. Based on microbial interaction networks, communities responded to the disturbance by showing a transition from acetotrophic (Methanotrichaceae and Methanosarcinaceae) to methylotrophic methanogens (Methanomassiliicoccaceae and Methanobacteriaceae) and a fluctuation in rare biosphere taxa. To conclude, this study may be important for exploring the dynamic relationships between disturbance and microbial communities as a whole, as well as for providing researchers with a better understanding of how changes in microbial communities relate to ecological processes.

Enhancement of excess sludge hydrolysis and decomposition with different lysozyme dosage

The performance of the lysozyme catalysis on excess sludge (ES) hydrolysis and decomposition was investigated in this study. For this purpose, the release of soluble organic matters from sludge flocs, extracellular polymeric substances (EPS) changes in composition and distribution and the quantity variations of microorganisms were monitored. Results indicated that lysozyme boosted the ES hydrolysis significantly with approximately 236.5 mg/L soluble chemical oxygen demand (SCOD), 58.6 mg/L polysaccharide and 662.7 mg/L protein release within 240 min at the lysozyme dosage of 150 mg/gSS. Arising lysozyme dosages (from 0 to 150 mg/gSS step by step) could dramatically enhance the efficiency of the enzyme on ES with the concentration of polysaccharide increased from 84.6 mg/L to 143.2 mg/L and protein increased from 325.0 mg/L to 987.7 mg/L in total EPS. The decomposition effect of lysozyme on microorganisms improved with dosage, about 15.4%, 17.5% and 20.2% bacteria and 56.3%, 57.2% and 65.0% archaea were disintegrated at the lysozyme dosages of 50, 100 and 150 mg/gSS, respectively. However, fungi were barely influenced by the enzymatic catalysis. Tryptophan-protein like substances and aromatic protein were the dominant ES lysis compositions in EPS.

Enhanced organics and Cu2+ removal in electroplating wastewater by bioaugmentation

With the improvement of electroplating process and products requirement, refractory organics, heavy metals or even heavy metal nanoparticles (NP) exist simultaneously in electroplating wastewater inevitably, makes electroplating wastewater treatment effluent difficult to meet the discharge standard. In order to improve the organics removal under the exposure of CuO NP, strains (designated as L1-L5) that have both organics degradation and Cu²⁺ tolerance capacities were isolated and employed in the electroplating wastewater bioaugmentation treatment using a hydrolytic/anoxic/oxic-membrane bioreactor. The Cu²⁺ adsorption process followed pseudo-second order kinetics and the isotherms fit well to Langmuir isotherm model. L2, L3 and L4 showed higher Cu²⁺ adsorption capacity than that of L1 and L5. Under the optimal condition, the maximum Cu²⁺ adsorption capacity of L2, L3 and L4 was 34.15, 45.68 and 26.72 mg g^-1, respectively. Their average COD removal efficiency achieved 65.7 ± 10.9%, 61.5 ± 6.7% and 71.6 ± 6.0%, respectively. The three isolates were used to construct consortia with the inoculum concentration of 400 mg L^-1. One-time and repeated inoculations were evaluated to find the applicable strategy. Repeated inoculation resulted in a better COD and Cu removal performance (76.2 ± 2.6% and 98.5 ± 0.3%, respectively) than those of one-time inoculation (69.0 ± 2.0% and 98.0 ± 0.3%, respectively). The most functionally stable, balanced and resistant bacterial community was formed in the one-time inoculation system while for fungal community it was formed in the repeated inoculation system.

Molecular cloning, expression and antibacterial activity of goose-type lysozyme gene in Microptenus salmoides

It is well known that lysozymes are key proteins to teleosts in the innate immune system and possess high bactericidal properties. In the present study, a g-type lysozyme gene was cloned from Microptenus salmoides. The g-type sequence consisted of 582 bp, which translated into a 193 amino acid (AA) protein (GenBank accession no: MH087462). The predicted molecular weight and theoretical isoelectric point were 21.36 kDa and 6.91 respectively and no signal peptide was observed. The qRT-PCR analysis showed that the g-type lysozyme gene was differentially expressed in various tissues under normal conditions and the highest g-type lysozyme level was observed in liver, gill and spleen while there seemed to be low expression in the muscle, heart and head-kidney. The expression of g-type lysozyme was differentially upregulated in the spleen, gill and intestine after stimulation with heat stress and Aeromonas hydrophila (A. hydrophila). Under heat stress and A. hydrophila injection, the g-type lysozyme mRNA levels all in spleens, gill and intestine tissues increased significantly (P < 0.05), with the maximum levels attained at 12 h, 24 h (or 12 h) and 24 h. Thereafter, they all decreased significantly (P < 0.01) and the expression in gill returned to nearly the basal value within 72 h. Those results suggested that g-type lysozyme was involved in the immune response to heat stress and bacterial challenge. The cloning and expression analysis of the g-type lysozyme provide theoretical basis to further study the mechanism of anti-adverseness in Microptenus salmoides. The g-type lysozyme gene perhaps also played an important role in the immune responses against bacterial invasion.

The relationship between volatile fatty acids accumulation and microbial community succession triggered by excess sludge alkaline fermentation

The volatile fatty acids (VFAs) accumulation pattern and microbial community succession were studied during excess sludge (ES) alkaline fermentation at pH of 10.0 with expanded granular sludge blanket reactor over 5 cyclers. Microbial community shifted conspicuously as ES suffered alkaline fermentation. Both VFAs and acid-producing bacteria increased rapidly during the first 8 days fermentation time, and they showed a quite positive correlation relationship. In addition, soluble chemical oxygen demand (SCOD) also dramatically increased during the first 8 days, which implied 8 day was the optimum sludge retention time (SRT) for ES alkaline fermentation and VFAs accumulation time. Illumina Miseq Sequencing analysis indicated that Clostridium, Bacillus, Amphibacillus and Peptostreptococcaceae were the dominant bacteria genus to produce VFAs. Acetic acid took about 84% in total VFAs because among the total acid-producing bacteria most bacteria could produce acetic acid.

Analysis on the expression and function of a chicken-type and goose-type lysozymes in Chinese giant salamanders Andrias davidianus

Lysozymes as an important immune factor, play vital roles in innate immune response against pathogen infection. In the present study, one c-type and g-type lysozymes were identified from Chinese giant salamander (Andrias davidianus). They shared highly conserved structural features with lysozymes from other species. Spatial expression analysis revealed that AdlysC transcript was most abundant in liver and stomach, and least in muscle and brain. In contrast, the expression level of AdlysG was most abundant in liver and least in muscle and skin. The transcription level of c-type and g-type lysozymes were up-regulated after Aeromonas hydrophila infection in liver and spleen, indicating their participations in the immune response. Moreover, the recombinant AdlysC and AdlysG protein were produced and purified, and were used to investigate the lysozyme activity at different pH and temperatures. The optimal lytic activity was determined at pH 6.0 and at a temperature of 30 °C. Through the minimal inhibitory concentration test, the rAdlysC and rAdlysG exhibited apparent antibacterial activity against both Gram-positive and Gram-negative bacteria with a variable concentration. In conclusion, it is the first report of lysozymes in A. davidianus, and c-type and g-type lysozymes should be involved in the innate immune response of A. davidianus.

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5days, carbon concentration of 2.52g COD/L and initial biomass concentration of 3.65g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.

Role of aeration intensity on performance and microbial community profiles in a sequencing batch reaction kettle (SBRK) for wastewater nutrients rapid removal

A lab-scale SBRK was operated to investigate the effects of aeration intensity on the system performance and microbial community dynamics within it. Results showed that the sewage nutrients was removed rapidly (just about 3-6h) with the aeration intensity increasing from 0 to 0.6MPa. Average effluent parameters were: COD below 50mg/L, NH4(+)-N less than 1mg/L, 1.5-4.5mg/L for nitrate and TP below 0.5mg/L. The highest community similarity and diversity emerged simultaneously with the aeration pressure rising from 0.2 to 0.4MPa, which was regarded as the optimal aeration intensity range. Microbial community shifted obviously and the function species of Comamonadaceae, Dechloromonas, Flavobacterium and Nitrospira dominated in the corresponding communities. RDA indicated that aeration intensity was the main factor for regulating system communities to optimize the system performance. It inferred that high aeration pressure played a key role on sewage nutrients rapid removal.