Chemical characteristics and enzymatic saccharification of lignocellulosic biomass treated using high-temperature saturated steam: comparison of softwood and hardwood

Multiscale investigation on the chemical and anatomical changes of lignocellulosic biomass for different severities of hydrothermal treatment

The chemical changes sustained by lignocellulosic biomass during hydrothermal treatment are reflected at multiple scales. This study proposes to benefit from this multiscale nature in order to provide a global understanding of biomass alterations during hydrothermal treatment. For this purpose, complementary imaging techniques-confocal Raman microscopy and X-ray nano-tomography-analysed by image processing and coupled to chemical measurements were used. This unique combination of analyses provided valuable information on topochemical and morphological changes of poplar samples, without the artefacts of sample preparation. At the cell wall level, holocellulose hydrolysis and lignin modifications were observed, which corresponded to anatomical modifications observed at higher scales. Overall, after treatment, samples shrank and had thinner cell walls. When subjected to more severe pre-treatments, cells were disrupted and detached from adjacent cells. Anatomical changes were then used to obtain quantitative indicators of the treatment severity. The effects of treatment at different scales can thus be quantitatively connected in both directions, from micro to macro and from macro to micro.

In situ measurements of viscoelastic properties of biomass during hydrothermal treatment to assess the kinetics of chemical alterations

This work aimed to use continuous measurements of viscoelastic properties to evaluate the effect of hydrothermal treatment on poplar samples. Different conditions (temperature and pre-soaking liquid: acidic, neutral and alkaline) were tested on wood in both tangential and radial directions. Two viscoelastic properties were determined: the modulus of elasticity and the stress relaxation. The applicability of these properties as indicators of the kinetics of biomass deconstruction was also evaluated, thanks to the chemical analyses performed on the treated solid and the recovered liquid phase. The ultimate goal is to build a macroscopic indicator capable of establishing rules to optimize the hydrothermal treatment before the explosion stage. The joint use of the two parameters succeeded in revealing the effects of chemical degradation, including the coexistence of cleavage and re-condensation and the impact of process conditions (temperature, residence time, and pre-soaking liquid). The monotonous behavior of stress relaxation is a major asset as a possible macroscopic indicator of biomass deconstruction.

Steam Explosion Pretreatment of Beechwood. Part 1: Comparison of the Enzymatic Hydrolysis of Washed Solids and Whole Pretreatment Slurry at Different Solid Loadings

Steam explosion is a well-known process to pretreat lignocellulosic biomass in order to enhance sugar yields in enzymatic hydrolysis, but pretreatment conditions have to be optimized individually for each material. In this study, we investigated how the results of a pretreatment optimization procedure are influenced by the chosen reaction conditions in the enzymatic hydrolysis. Beechwood was pretreated by steam explosion and the resulting biomass was subjected to enzymatic hydrolysis at glucan loadings of 1% and 5% employing either washed solids or the whole pretreatment slurry. For enzymatic hydrolysis in both reaction modes at a glucan loading of 1%, the glucose yields markedly increased with increasing severity and with increasing pretreatment temperature at identical severities and maximal values were reached at a pretreatment temperature of 230 °C. However, the optimal severity was 5.0 for washed solids enzymatic hydrolysis, but only 4.75 for whole slurry enzymatic hydrolysis. When the glucan loading was increased to 5%, glucose yields hardly increased for pretreatment temperatures between 210 and 230 °C at a given severity, and a pretreatment temperature of 220 °C was sufficient under these conditions. Consequently, it is important to precisely choose the desired conditions of the enzymatic hydrolysis reaction, when aiming to optimize the pretreatment conditions for a certain biomass.

Green Preparation of Straw Fiber Reinforced Hydrolyzed Soy Protein Isolate/Urea/Formaldehyde Composites for Biocomposite Flower Pots Application

The effects of soil burial on the biodegradation of biocomposite flower pots (BFP) made from straw fiber (SF) and hydrolyzed soy protein isolate/urea/formaldehyde (HSPI/U/F) copolymer resin were studied in detail. The microstructure, crystallinity, functional groups, mechanical, degradation and thermal property of the prepared SF with HSPI/U/F copolymer resin have been studied, and the degradation mechanism was also elucidated. XRD results showed that the bond breakage between SF and HSPI/U/F copolymer resin induced a decrease in relative degradation-resistant crystal structures. FTIR spectra showed that the methylolated HSPI units could form a cross-linking network with U/F and SF. The BFP degradation after soil burial was mainly attributed to the effects of microorganisms. The degradation products were environmentally friendly, because they were degradable and could fertilize the soil. In addition, the U/F adhesives were slightly degraded by the microorganisms due to the HSPI in the pots. The TG and DSC results showed that the molecular motion of the BFP matrix could be restricted by the degradation action and the content of HSPI, resulting in decreased crystallization enthalpy and showing good thermal property. The tensile strength of different reinforced samples was not significantly reduced in comparison to U/F resin, and still kept good mechanical performance. Thus, the prepared SF reinforced HSPI/U/F copolymer resins could have good potential for use in the field of biodegradable flower pots because of their good thermal property, mechanical property, biodegradability, and relatively low cost.

Evaluation of buriti endocarp as lignocellulosic substrate for second generation ethanol production

The production of lignocellulosic ethanol is one of the most promising alternatives to fossil fuels; however, this technology still faces many challenges related to the viability of the lignocellulosic alcohol in the market. In this paper the endocarp of buriti fruit was assessed for ethanol production. The fruit endocarp was characterized physically and chemically. Acid and alkaline pre-treatments were optimized by surface response methodology for removal of hemicellulose and lignin from the biomass. Hemicellulose content was reduced by 88% after acid pretreatment. Alkaline pre-treatment reduced the lignin content in the recovered biomass from 11.8% to 4.2% and increased the concentration of the cellulosic fraction to 88.5%. The pre-treated biomass was saccharified by the action of cellulolytic enzymes and, under optimized conditions, was able to produce 110 g of glucose per L of hydrolyzate. Alcoholic fermentation of the enzymatic hydrolyzate performed by Saccharomyces cerevisiae resulted in a fermented medium with 4.3% ethanol and a yield of product per substrate (YP/S) of 0.33.