Advanced treatment of biologically pretreated coal gasification wastewater by a novel integration of heterogeneous Fenton oxidation and biological process

Porous Hierarchical Ni/Mg/Al Layered Double Hydroxide for Adsorption of Methyl Orange from Aqueous Solution

A basic urea technique was successfully used to synthesize Mg/Al-Layered double hydroxides (Mg/Al LDHs), which were then calcined at 400 °C to form Mg/Al-Layered double oxides (Mg/Al LDOs). To reconstruct LDHs, Mg/Al LDOs were fabricated with different feeding ratios of Ni by the co-precipitation method. After synthesis, the Ni/Mg/Al-layered double hydroxides (NMA-LDHs) with 20% and 30% Ni (S1 and S2) were roasted at 400 °C and transformed into corresponding Ni/Mg/Al-layered double oxides (NMA-LDOs) (S1a and S2b, respectively). The physiochemical properties of synthesized samples were also evaluated by various characterization techniques, such as X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR), and Brunauer, Emmett, and Teller (BET). The adsorption behavior of methyl orange (MO) onto the synthesized samples was evaluated in batch adsorption mode under varying conditions of contact time, adsorbent quantity, and solution pH. As the dosage amount increased from 0.01-0.04 g, the removal percentage of MO dye also increased from 83% to 90% for S1, 84% to 92% for S1a, 77% to 87% for S2, and 93% to 98% for S2b, respectively. For all of the samples, the adsorption kinetics were well described by the pseudo-second-order kinetic model. The equilibrium adsorption data were well fitted to both Langmuir and Freundlich models for methyl orange (MO). Finally, three adsorption-desorption cycles show that NMA-LDHs and NMA-LDOs have greater adsorption and reusability performance for MO dye, signifying that the design and fabrication strategy can facilitate the application of the natural hydrotalcite material in water remediation.

Advanced treatment of secondary effluent by the integration of heterogeneous catalytic ozonation and biological aerated filter

The advanced treatment of secondary effluents was investigated by employing heterogeneous catalytic ozonation integrated with a biological aerated filter (BAF) process. The results indicated that catalytic ozonation with the prepared catalyst (Mn_xCu_yO_z/γ-Fe₂O₃) significantly enhanced the performance of pollutant removal and broke up macromolecules into molecular substances by the generated hydroxyl radicals. These molecular substances were easily absorbed by microorganisms in the microbial membrane reactor. In the BAF process, chemical oxygen demand (COD) (chemical oxygen demand) decreased from 54.26 to 32.56 mg/L, while in catalytic ozonation coupled with the BAF, COD could be reduced to 14.65 mg/L (removal ratio 73%). Under the same condition, NH₄⁺-N decreased from 77.43 to 22.69 mg/L and 15.73 mg/L (removal ratio 70%) in the BAF and the catalytic ozonation coupled with BAF, respectively. In addition, the model that highly correlated influent COD to effluent COD and reactor height for filler could predict the removal ratio of COD of the BAF system. Based on the microbial community analysis, ozone in the solution had a certain screening effect on microorganisms, which helped to better adapt to the ozone-containing environment. Therefore, the integrated process with its efficient, economic, and sustainable advantages was suitable for the advanced treatment of secondary effluents.

Biological filtration for wastewater treatment in the 21st century: A data-driven analysis of hotspots, challenges and prospects

Biological filtration has been widely used in wastewater treatment around the world, yet achieving satisfactory removal of pollutants remains a challenge due to the complexity of water pollution. In order to reveal the hotspots and trends of biological filtration from the perspective of research innovation, 5454 SCI papers and 14,287 patents collected from the Web of Science Core Collection and Derwent Innovation Index database were analyzed by visualization techniques. The results showed that China ranked first in the number of both papers and patents, while the USA and Japan contributed significantly in papers and patents, respectively. Co-occurrence analysis obtained the mapping knowledge domains and demonstrated distinct associations between contaminants ("nitrogen", "pharmaceuticals", "personal care products"), chemicals ("carbon", "activated carbon", "media"), process ("biodegradation", "adsorption" or "ozonation") and characteristics ("kinetics", "performance", "diversity"). Moreover, this review summarized the recent advances of biological filtration media, microorganism and combined process being applied. It was concluded that environmentally friendly biological filtration ("phytoremedi", "microalga", "recirculating aquaculture system"), bio-enhanced biological filtration ("bioaugment", "fungi", "low augment") and emerging pollutants ("emerging contamin", "antibiotic resistance gen", "organic micropollut", "trace organic chem") were the hotspots through data-driven analyses. Technology evolution path of biological filtration generally indicated the transition from conventional biological filtration for nitrogen and phosphorus removal to Fenton-biofiltration combined technology and finally to ozone-biological filtration. Furthermore, the technical innovation direction of the collaborative control of multi-media pollution, the low-carbon biological filtration and short-process technology was prospected. This work can serve as a quick reference for early-career researchers and industries working in the area of biological filtration.

Preparation of sludge-based materials and their environmentally friendly applications in wastewater treatment by heterogeneous oxidation technology

The sludge resource utilization and the high value-added development are environmentally friendly means for sludge treatment. With its rich organic substances and metals content, sludge can replace activated carbon and become a widely used carbon-based material, such as sludge-based activated carbon (SBAC). Meanwhile, as a heterogeneous catalyst, sludge-based catalyst (SBC) can solve the requirements of traditional Fenton catalysts for pH, metal ion leaching, and catalyst recycling. In this paper, combining the properties of SBAC/SBCs, the characteristics of the three methods of activation, support, and hydrothermal preparation of SBAC/SBCs are reviewed. In general, it is necessary to select an appropriate preparation method based on pollutants and environmental treatment goals. Furthermore, compared with other catalysts, SBC heterogeneous oxidation has obvious advantages in refractory organic pollutants. And the reaction mechanism usually involves SO₄·^-, ·OH, O₂·^-, and ¹O₂ processes. Finally, some possible directions for future research involving environmentally friendly SBAC/SBCs are proposed.

Preparation of a porous carbon material by hydrothermal activation of itaconic acid fermentation waste liquid and its efficient adsorption of Cr(vi)

Recycling organic waste liquid to treat chromium-containing wastewater to achieve the purpose of treating waste with waste.

Effective oxidative degradation of coal gasification wastewater by ozonation: A process study

Coal gasification wastewater (CGW) has attracted considerable industrial attention because of its high toxicity and poor biodegradability. Ozonation is a promising process for CGW treatment. In this study, the effects of ozone concentration, pH, and ozonation time on CGW treatment were investigated. The results confirmed that CGW was degraded effectively and that the chemical oxygen demand (COD) was reduced from 1057 to 362 mgL^-1, utilizing 50 mgL^-1 ozone for 90 min. Further, the color of CGW changed from brown to clear and colorless, and the pH decreased from 8.5 to 4.7. Importantly, molds were observed in the oxidized CGW after 14 d at room temperature (23 ± 2 °C), indicating that CGW is significantly biodegradable by ozonation. The CGW components were extracted with three different organic solvents (chloroform, n-hexane, and benzene), and their compositions were analyzed by gas chromatography-mass spectrometry (GC-MS) before and after ozonation. The results proved that considerable amounts of highly toxic refractory compounds in CGW, such as phenolic compounds, polynuclear aromatic hydrocarbons (PAHs), and nitrogenous heterocyclic compounds (NHCs), were degraded to compounds that included olefins, carboxylic acids, and cycloalkanes, or minerals, which are relatively environmentally benign. Moreover, the number of substances in CGW decreased significantly from 127 to 74 after ozonation. Summarily, ozonation is a promising approach for the treatment of highly toxic refractory wastewater, such as CGW.

Preparation of nitrogen-doped porous carbon material by a hydrothermal-activation two-step method and its high-efficiency adsorption of Cr(VI)

Nitrogen-doped carbon spheres (CSs-N) were synthesized by a hydrothermal method with glucose as the carbon source and urea as the nitrogen source. The synthesized nitrogen-doped carbon spheres were activated by KOH to prepare high performance nitrogen-doped porous carbon material (PCM-N) for adsorption of Cr(VI). SEM, TEM, BET, Raman spectroscopy, XRD, XPS, Zeta potential and elemental analysis techniques were used to characterize the materials, and the properties of the materials were tested by a batch adsorption method. The results show that the specific surface area of PCM-N is 1600.67 m²/g, and the maximum adsorption capacity of Cr(VI) is 402.9 mg/g, and the performance was better than that of a similar materials (Longan seed and Fox nutshell and so on). Furthermore, the adsorption capacity will increase with increasing temperature. In this study, the kinetics and isotherm model of adsorption parameters are fitted, and it is found that the adsorption process is in accordance with the Pseudo-second-order kinetic model and Freundlich model, thermodynamic parameters show that the adsorption of Cr(VI) onto the PCM-N was spontaneous endothermic process. The regeneration adsorption experiment showed that PCM-N has good reusability and high application value.

Tracking multiple aromatic compounds in a full-scale coking wastewater reclamation plant: Interaction with biological and advanced treatments

Aromatic compounds are widely contained in coking wastewater (CWW), drawing great attention due to their potential risks to environment and human health. Integrated systems combining biological processes with advanced treatments are the current trend of CWW reclamation. However, the variations of aromatic composition throughout these processes are poorly understood. This study investigated the occurrence, fate and removal of aromatic compounds in a full scale CWW reclamation plant with eight treatment stages by gas chromatography-mass spectrometry and optical spectrum. The results showed that polycyclic aromatic hydrocarbons (PAHs), phenols and heterocyclic compounds accounted for 38.9%, 33.5% and 22.6% of the total organics in CWW, respectively. Among them, PAHs were more sensitive to anaerobic digestion, while phenols and heterocyclics had higher bioavailability in aerobic process. Although more than 90% DOC could be removed in biological processes, the bio-effluent was still brown in color, implying the residues of aromatics to the advanced treatments. The interaction between the bio-refractory organics and the advanced treatments suggested that multiple aromatic compounds were selectively removed along the treatment train. Specifically, coagulation, sand filtration, ultrafiltration, adsorption, nanofiltration and reverse osmosis were found to be highly related to the elimination of residual isoquinoline, phenol, cresol, fluoranthene, benzene and humic-like organics, correspondingly. Findings in this study indicated that adsorption was a key step for removing chromophoric PAHs with more aromatic rings, while fouling control in the end-point membrane systems should be focused on the elimination of BTEXs and humic-like substances.

Overview of the state of the art of processes and technical bottlenecks for coal gasification wastewater treatment

CGWW is major waste stream resulting from a number of activities of the low/medium temperature gasification unit that occurs during the production of natural gas. The resulting effluent contains a broad spectrum of organic and inorganic contaminants and exerts a negative influence on the environment, mainly due to the presence of toxic and refractory compounds. So far, various technologies have been applied for treatment of CGWW, while few reviews are available in the literature. Thus, this review attempts to offer a comprehensive picture about CGWW. An overview about pretreatment, biological and advanced processes for treatment of CGWW is presented, and the degradation mechanism of toxic and refractory pollutants is also elaborated. Technical bottlenecks existing in the operation of coal chemical industries, including foam proliferation, odors and biotoxicity risk, are detailed analyzed. Finally, the prospects of treatment for CGWW are discussed based on the concept of "wastewater is money". The review can be provided as an effective technical support for the construction and operation of coal gasification industries.

Degradation characteristics of two typical N-heterocycles in ozone process: Efficacy, kinetics, pathways, toxicity and its application to real biologically pretreated coal gasification wastewater

Ozonation of pyridine and indole was investigated both in aqueous solution and biologically pretreated coal gasification wastewater (BPCGW). Experimental results showed that the removal of indole was hardly affected by pH value. Direct reaction rate constant of ozone with pyridine increased from 0.18 M^-1 s^-1 (protonated pyridine) to 3.03 M^-1 s^-1 (molecular pyridine), and that with molecular indole was 8.6 × 10⁵ M^-1 s^-1. Seven and five transformation intermediates were observed for pyridine and indole, respectively. Ozonation pathways were proposed as hydroxylation, opening and cleavage of the aromatic ring. It was found that ammonia nitrogen (NH₃N) increased by 3.3 mg L^-1 in ozone process, suggesting the broken of the CN bonds of pyridine, indole and other N-heterocyclic compounds. In terms of biochemical oxygen demand to chemical oxygen demand (BOD₅/COD), toxicity and resazurin dehydrogenase activity (DHA), the biodegradability was improved after ozone treatment, indicating the possibility of ozone combined with biosystem for the treatment of BPCGW. The results of gas chromatograph and mass spectrometry (GC-MS) indicated that primary products during first 10 min might lead to the obstinate toxicity, which was further proved by US Environmental Protection Agency (US-EPA) test. This study would assist in obtaining a better understanding of the application of ozonation pretreatment in BPCGW.

Effect of the addition of exogenous precursors on humic substance formation during composting

The aim of this work was to explore the effect of the addition of exogenous precursors on humic substance (HS) formation during composting. HS formation is a complex biochemical process that occurs during composting. In addition, HS precursors and bacterial communities were recognized as the key factors that affect HS formation. The addition of exogenous precursors can promote the humification process during composting, but few studies have explored the potential relationships between the proportion of additional exogenous precursors, the bacterial community and HS formation. Jointly adding benzoic acid (BA) and soybean residue after extracted oil (SR) treatment can promote HS formation, especially humic acid formation. In addition, the increase in the proportion of exogenous precursors added could strengthen the relationship among different precursors, thereby changing the bacterial community composition and further promoting the humification process during composting. In addition, a structural equation model (SEM) showed that precursors were the key factors to regulate HS formation and certain bacteria as the direct drivers to affect HS formation. This model provides more possibilities to regulate HS formation during composting and enhances its potential applicability under real conditions.

Pretreatment technologies for industrial effluents: Critical review on bioenergy production and environmental concerns

The implementation of different pretreatment techniques and technologies prior to effluent discharge is a direct result of the inefficiency of several existing wastewater treatment methods. A majority of the industrial sectors have known to cause severe negative effects on the environment. The five major polluting industries are the paper and pulp mills, coal manufacturing facilities, petrochemical, textile and the pharmaceutical sectors. Pretreatment methods have been widely used in order to lower the toxicity levels of effluents and comply with environmental standards. In this review, the possible environmental benefits and concerns of adopting different pretreatment technologies for renewable energy production and product/resource recovery has been reviewed and discussed.

Impact of dissolved oxygen on the microbial community structure of an intermittent biological aerated filter (IBAF) and the removal efficiency of gasification wastewater

A novel IBAF system (altered conventional biological aerated filter (BAF) for intermittent aeration) was used to treat BDD anodes electrochemical oxidation gasification wastewater effluent, after which 454 pyrosequencing was applied to investigate the bacterial community of IBAF and demonstrate the relationship between dissolved oxygen (DO) and the bacterial community. The results showed that the concentration of COD, NH₄⁺-N and NO₃^--N reached 55.08, 7.64 and 7.76 mg/L, respectively, in IBAF effluent because of changes in the DO concentration at 30 days after system start-up. The bacterial community results revealed that the 40 cm sample had the highest bacterial diversity. The bacterial species were approximate in total samples at phylum and family level, but the relative abundance was significantly different because of change in DO concentration. In addition, sample distance analysis indicated that the similarity of different samples was related to the DO concentration at different heights.

Recent advances in degradation of chloronitrophenols

Chloronitrophenols (CNPs) constitute a group of environmental pollutants that are widely distributed in our surrounding environment due to human based activities. This group of chemicals is highly toxic to living beings due to its mutagenic and carcinogenic nature. Examples include 2-chloro-4-nitrophenol, 4-chloro-2-nitrophenol, 2-chloro-5-nitrophenol, 4-chloro-3-nitrophenol and 2,6-dichloro-4-nitrophenol. Several methods including advanced oxidation processes, adsorption and bacterial degradation have been used for degradation of CNPs. Among, bacterial degradation is an eco-friendly and effective way to degrade CNPs. Several bacterial metabolic pathways have been proposed for degradation of CNPs and their genes and enzymes have been identified in bacteria. These bacteria were able to degrade CNPs in broth culture and soil. Therefore, CNPs-degrading bacteria are suitable candidates for bioremediation of CNPs-contaminated sites. Few CNP-degrading bacteria exhibited chemotaxis towards CNPs to enhance their biodegradation. The present review summarizes recent progress in degradation of CNPs.

Cotton fiber-supported layered double hydroxides for the highly efficient adsorption of anionic organic pollutants in water

Cotton fiber is used as a substrate for the immobilization of LDHs and applied for the adsorption anionic pharmaceuticals and dyes.

Highly efficient one-step advanced treatment of biologically pretreated coking wastewater by an integration of coagulation and adsorption process

A novel integrated process of coagulation and adsorption was proposed for the advanced treatment of biologically pretreated coking wastewater. Results of laboratory, pilot, and industrial-scale experiments indicated that this one-step novel process can remove biorefractory pollutants, achieving the maximum chemical oxygen demand (COD) and cyanide removals of around 85.3% and 99.4%, respectively. Its effluent could meet the corresponding discharge standards without any further treatment, i.e., COD <30mg/L, cyanide <0.1mg/L, and improved effluent safety (lower toxicity). The easy operation and high efficiency of this method reflect its engineering-application potential in the tertiary treatment of coking wastewater.

Remediation of water contaminated with diesel oil using a coupled process: Biological degradation followed by heterogeneous Fenton-like oxidation

The treatment of a synthetically prepared wastewater containing diesel oil has been investigated using combined treatment schemes based on the biological treatment followed by an advanced oxidation process. 78% of diesel oil was degraded by Acinetobacter venetianus in 96 h, while the removal efficiency of chemical oxygen demand (COD) in the aqueous phase was only 56.8%, indicating that degraded metabolites existed in solution. To solve this problem, a Fenton-like system consisting of nanoscale zero-valent iron (nZVI) and hydrogen peroxide was used for further oxidation of the metabolites after biodegradation. Results showed that the total COD removal increased from 56.8% to 89% under the optimal condition. In addition, effects of initial pH (2.0-9.0), ZVI dosage (0-2.0 g L-1), hydrogen peroxide (H₂O₂) dosage concentration (0-15 mmol L-1) and temperature (298-308 K) on the treatment efficiency of the combined process were studied. Scanning electron microscopy (SEM) demonstrated that changes to the surface of nZVI occurred. GC-MS revealed that the degraded metabolites were mineralized practically by nZVI/H₂O₂ system. The results points towards the potential of Fenton-like oxidation as a short post-treatment after a biological process for the treatment of organic pollutants in wastewater.

Superb adsorption capacity of hierarchical calcined Ni/Mg/Al layered double hydroxides for Congo red and Cr(VI) ions

The preparation of hierarchical porous materials as catalysts and sorbents has attracted much attention in the field of environmental pollution control. Herein, Ni/Mg/Al layered double hydroxides (NMA-LDHs) hierarchical flower-like hollow microspheres were synthesized by a hydrothermal method. After the NMA-LDHs was calcined at 600°C, NMA-LDHs transformed into Ni/Mg/Al layered double oxides (NMA-LDOs), which maintained the hierarchical flower-like hollow structure. The crystal phase, morphology, and microstructure of the as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy elemental mapping, Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption methods. Both the calcined and non-calcined NMA-LDHs were examined for their performance to remove Congo red (CR) and hexavalent chromium (Cr(VI)) ions in aqueous solution. The maximum monolayer adsorption capacities of CR and Cr(VI) ions over the NMA-LDOs sample were 1250 and 103.4mg/g at 30°C, respectively. Thermodynamic studies indicated that the adsorption process was endothermic in nature. In addition, the addition of coexisting anions negatively influenced the adsorption capacity of Cr(VI) ions, in the following order: CO₃^2->SO₄^2->H₂PO₄^->Cl^-. This work will provide new insight into the design and fabrication of advanced adsorption materials for water pollutant removal.

Elimination of radiocontrast agent diatrizoic acid by photo-Fenton process and enhanced treatment by coupling with electro-Fenton process

The removal of radiocontrast agent diatrizoic acid (DIA) from water was performed using photo-Fenton (PF) process. First, the effect of H2O2 dosage on mineralization efficiency was determined using ultraviolet (UV) irradiation. The system reached a maximum mineralization degree of 60 % total organic carbon (TOC) removal at 4 h with 20 mM initial H2O2 concentration while further concentration values led to a decrease in TOC abatement efficiency. Then, the effect of different concentrations of Fenton's reagents was studied for homogeneous Fenton process. Obtained results revealed that 0.25 mM Fe(3+) and 20 mM H2O2 were the best conditions, achieving 80 % TOC removal efficiency at 4 h treatment. Furthermore, heterogeneous PF treatment was developed using iron-activated carbon as catalyst. It was demonstrated that this catalyst is a promising option, reaching 67 % of TOC removal within 4 h treatment without formation of iron leachate in the medium. In addition, two strategies of enhancement for process efficiency are proposed: coupling of PF with electro-Fenton (EF) process in two ways: photoelectro-Fenton (PEF) or PF followed by EF (PF-EF) treatments, achieving in both cases the complete mineralization of DIA solution within only 2 h. Finally, the Microtox tests revealed the formation of more toxic compounds than the initial DIA during PF process, while, it was possible to reach total mineralization by both proposed alternatives (PEF or PF-EF) and thus to remove the toxicity of DIA solution.

Effect of effluent recirculation rate on the performance of anaerobic bio-filter treating coal gasification wastewater under co-digestion conditions

In this study, anaerobic biofilter (AF) was adopted for anaerobic co-digestion of potato starch wastewater (PSW) and coal gasification wastewater (CGW).

Advanced treatment of biologically pretreated coal gasification wastewater by a novel integration of three-dimensional catalytic electro-Fenton and membrane bioreactor

Laboratorial scale experiments were conducted to investigate a novel system three-dimensional catalytic electro-Fenton (3DCEF, catalyst of sewage sludge based activated carbon which loaded Fe3O4) integrating with membrane bioreactor (3DCEF-MBR) on advanced treatment of biologically pretreated coal gasification wastewater. The results indicated that 3DCEF-MBR represented high efficiencies in eliminating COD and total organic carbon, giving the maximum removal efficiencies of 80% and 75%, respectively. The integrated 3DCEF-MBR system significantly reduced the transmembrane pressure, giving 35% lower than conventional MBR after 30 days operation. The enhanced hydroxyl radical oxidation and bacteria self repair function were the mechanisms for 3DCEF-MBR performance. Therefore, the integrated 3DCEF-MBR was expected to be the promising technology for advanced treatment in engineering applications.

Advanced treatment of biologically pretreated coal gasification wastewater by a novel integration of catalytic ultrasound oxidation and membrane bioreactor

Laboratorial scale experiments were conducted to investigate a novel system integrating catalytic ultrasound oxidation (CUO) with membrane bioreactor (CUO-MBR) on advanced treatment of biologically pretreated coal gasification wastewater. Results indicated that CUO with catalyst of FeOx/SBAC (sewage sludge based activated carbon (SBAC) which loaded Fe oxides) represented high efficiencies in eliminating TOC as well as improving the biodegradability. The integrated CUO-MBR system with low energy intensity and high frequency was more effective in eliminating COD, BOD5, TOC and reducing transmembrane pressure than either conventional MBR or ultrasound oxidation integrated MBR. The enhanced hydroxyl radical oxidation, facilitation of substrate diffusion and improvement of cell enzyme secretion were the mechanisms for CUO-MBR performance. Therefore, the integrated CUO-MBR was the promising technology for advanced treatment in engineering applications.