The enhancement of ammonium removal from ethanolamine wastewater using air-cathode microbial fuel cells coupled to ferric reduction

Recent progress in microbial fuel cells using substrates from diverse sources

Increasing untreated environmental outputs from industry and the rising human population have increased the burden of wastewater and other waste streams on the environment. The most prevalent wastewater treatment methods include the activated sludge process, which requires aeration and is, therefore, energy and cost-intensive. The current trend towards a circular economy facilitates the recovery of waste materials as a resource. Along with the amount, the complexity of wastewater is increasing day by day. Therefore, wastewater treatment processes must be transformed into cost-effective and sustainable methods. Microbial fuel cells (MFCs) use electroactive microbes to extract chemical energy from waste organic molecules to generate electricity via waste treatment. This review focuses use of MFCs as an energy converter using wastewater from various sources. The different substrate sources that are evaluated include industrial, agricultural, domestic, and pharmaceutical types. The article also highlights the effect of operational parameters such as organic load, pH, current, and concentration on the MFC output. The article also covers MFC functioning with respect to the substrate, and the associated performance parameters, such as power generation and wastewater treatment matrices, are given. The review also illustrates the success stories of various MFC configurations. We emphasize the significant measures required to fill in the gaps related to the effect of substrate type on different MFC configurations, identification of microbes for use as biocatalysts, and development of biocathodes for the further improvement of the system. Finally, we shortlisted the best performing substrates based on the maximum current and power, Coulombic efficiency, and chemical oxygen demand removal upon the treatment of substrates in MFCs. This information will guide industries that wish to use MFC technology to treat generated effluent from various processes.

Recent advancements in microbial fuel cells: A review on its electron transfer mechanisms, microbial community, types of substrates and design for bio-electrochemical treatment

The development in urbanization, growth in industrialization and deficiency in crude oil wealth has made to focus more for the renewable and also sustainable spotless energy resources. In the past two decades, the concepts of microbial fuel cell have caught more considerations among the scientific societies for the probability of converting, organic waste materials into bio-energy using microorganisms catalyzed anode, and enzymatic/microbial/abiotic/biotic cathode electro-chemical reactions. The added benefit with MFCs technology for waste water treatment is numerous bio-centered processes are available such as sulfate removal, denitrification, nitrification, removal of chemical oxygen demand and biological oxygen demand and heavy metals removal can be performed in the same MFC designed systems. The various factors intricate in MFC concepts in the direction of bioenergy production consists of maximum coulombic efficiency, power density and also the rate of removal of chemical oxygen demand which calculates the efficacy of the MFC unit. Even though the efficacy of MFCs in bioenergy production was initially quietly low, therefore to overcome these issues few modifications are incorporated in design and components of the MFC units, thereby functioning of the MFC unit have improvised the rate of bioenergy production to a substantial level by this means empowering application of MFC technology in numerous sectors including carbon capture, bio-hydrogen production, bioremediation, biosensors, desalination, and wastewater treatment. The present article reviews about the microbial community, types of substrates and information about the several designs of MFCs in an endeavor to get the better of practical difficulties of the MFC technology.

New perspectives on microbial communities and biological nitrogen removal processes in wastewater treatment systems

Biological nitrogen removal (BNR) is a critical process in wastewater treatment. Recently, there have new microbial communities been discovered to be capable of performing BNR with novel metabolic pathways. This review presents the up-to-date status on these microorganisms, including ammonia oxidizing archaea (AOA), complete ammonia oxidation (COMAMMOX) bacteria, anaerobic ammonium oxidation coupled to iron reduction (FEAMMOX) bacteria, anaerobic ammonium oxidation (ANAMMOX) bacteria and denitrifying anaerobic methane oxidation (DAMO) microorganism. Their metabolic pathways and enzymatic reactions in nitrogen cycle are demonstrated. Generally, these novel microbial communities have advantages over canonical nitrifiers or denitrifiers, such as higher substrate affinities, better physicochemical tolerances and/or less greenhouse gas emission. Also, their recent development and/or implementation in BNR is discussed and outlook. Finally, the key implications of coupling these microbial communities for BNR are identified. Overall, this review illustrates novel microbial communities that could provide new possibilities for high-performance and energy-saving nitrogen removal from wastewater.

In situ synthesis of polypyrrole on graphite felt as bio-anode to enhance the start-up performance of microbial fuel cells

This study introduces an effective method to deposit polypyrrole (PPy) on graphite felt (GF) as anode to improve the start-up performance of microbial fuel cells (MFCs). The results of scanning electron microscope (SEM) and electrochemical testing reveal that polypyrrole is able to improve the electrical conductivity and surface roughness, which is beneficial to the microorganism attachment and growth. It shows that microorganisms grow faster on polypyrrole-modified anode than on unmodified anode. It takes ca. 5 days for polypyrrole-modified anode to reach a reproducible voltage platform, while it takes 11 days for unmodified anode. Moreover, the maximum power density of microbial fuel cells with polypyrrole-modified anode was 919 mW m^-2, which were 2.3 times of that with unmodified anode. This research revealed that polypyrrole modification can improve the start-up performance of microbial fuel cells. It is considered as a feasible, economical and sustainable anode.

Acceleration of electroactive anammox (electroammox) start-up by switching acetate pre-acclimated biofilms to electroammox biofilms

In this study, an operational method of switching acetate media to ammonium media after the formation of stable acetate-oxidizing biofilms (ACAM mode), was developed. The results showed that the start-up time was shortened to 48days in the ACAM mode compared to the AM (always ammonium media) mode (>120days), and an ammonia removal rate of 82±3% was achieved successfully and sustainably in the ACAM mode during the following long-term operation of more than 2months. Moreover, the ACAM mode was more efficient in enriching both electroammox bacteria and electricigens with Ignavibacteriaceae, Geobacteraceae and Nitrosomonadaceae as dominant families, which could favour the formation of high-performance electroammox biofilms. Thus, the ACAM mode might promote the widespread implementation of the electroammox process.

Enhanced removal of ethanolamine from secondary system of nuclear power plant wastewater by novel hybrid nano zero-valent iron and pressurized ozone initiated oxidation process

Monoethanolamine (shortly ethanolamine (ETA)), usually used as a corrosion inhibitor, is a contaminant of wastewater from the secondary cooling system of nuclear power plants (NPPs) and is not readily biodegradable. We conducted various experiments, including treatments with nano zero-valent iron (nZVI), nano-iron/calcium, and calcium oxide (nFe/Ca/CaO) with ozone (O₃) or hydrogen peroxide (H₂O₂) to reduce the concentration of ETA and to decrease the chemical demand of oxygen (COD) of these wastewaters. During this study, wastewater with ETA concentration of 7465 mg L^-1 and COD of 6920 mg L^-1 was used. As a result, the ETA concentration was reduced to 5 mg L^-1 (a decrease of almost 100%) and COD was reduced to 2260 mg L^-1, a reduction of 67%, using doses of 26.8 mM of nZVI and 1.5 mM of H₂O₂ at pH 3 for 3 h. Further treatment for 48 h allowed a decrease of COD by almost 97%. Some mechanistic considerations are proposed in order to explain the degradation pathway. The developed hybrid nano zero-valent iron-initiated oxidation process with H₂O₂ is promising in the treatment of ETA-contaminated wastewaters.

Removal of ammonia from aqueous solutions by ligand exchange onto a Cu(ii)-loaded chelating resin: kinetics, equilibrium and thermodynamics

A poly ligand exchanger (PLE), Cu(ii)-loaded chelating resin (ammonia adsorption reagent, named AMAR) was prepared to efficiently remove ammonia from solutions by ligand exchange.

Treatment of domestic sewage with anoxic/oxic membrane-less microbial fuel cell with intermittent aeration

An anoxic/oxic microbial fuel cell (MFC) reactor was applied to treat domestic sewage with intermittent aeration at cathodic chamber. The MFC yielded maximum power density of 2.05W/m(3) at current density 6.05A/m(3), 91.7±0.3% chemical oxygen demand (COD) and 98.2±0.3% ammonia-nitrogen (NH3-N) removals could be reached with most of the hydrophilic (HPI), hydrophobic acid (HPO-A), transphilic acid (TPI-A) of the former being consumed with minimal residual aromatics and the most of NH3-N being converted to N2. When the circuit was opened, the COD removal was dropped to 81.1±0.6% and NH3-N to 80.4±0.9% with most of the HPI, TPI-A and hydrophobic neutral (HPO-N) fractions of the former being consumed with excess aromatic residue and 60% of the latter being converted to NO2(-)-N or NO3(-)-N in effluent. Bioelectrochemical reactions in the tested MFC enhance COD and NH3-N removals from domestic sewage.

Microbial fuel cells as pollutant treatment units: Research updates

Microbial fuel cells (MFC) are a device that can convert chemical energy in influent substances to electricity via biological pathways. Based on the consent that MFC technology should be applied as a waste/wastewater treatment unit rather than a renewable energy source, this mini-review discussed recent R&D efforts on MFC technologies for pollutant treatments and highlighted the challenges and research and development needs. Owing to the low power density levels achievable by larger-scale MFC, the MFC should be used as a device other than energy source such as being a pollutant treatment unit.

Scaled-up dual anode/cathode microbial fuel cell stack for actual ethanolamine wastewater treatment

The aim of this work was to develop the scale-up microbial fuel cell technology for actual ethanolamine wastewater treatment, dual anode/cathode MFC stacks connected in series to achieve any desired current, treatment capacity, and volume capacity. However, after feeding actual wastewater into the MFC, maximum power density decreased while the corresponding internal resistance increased. With continuous electricity production, a stack of eight MFCs in series achieved 96.05% of COD removal and 97.30% of ammonia removal at a flow rate of 15.98L/d (HRT 12h). The scaled-up dual anode/cathode MFC stack system in this research was demonstrated to treat actual ETA wastewater with the added benefit of harvesting electricity energy.