Performance of anaerobic membrane bioreactor during digestion and thickening of aerobic membrane bioreactor excess sludge

Developments of electrospinning technology in membrane bioreactor: A review

The necessity for effective wastewater treatment and purification has grown as a result of the increasing pollution issues brought on by industrial and municipal wastewater. Membrane bioreactor (MBR) technology stands out when compared to other treatment methods because of its high efficiency, environmental friendliness, small footprint, and ease of maintenance. However, the development and application of membrane bioreactors has been severely constrained by the higher cost and shorter service life of these devices brought on by membrane biofouling issues resulting from contaminants and bacteria in the water. The nanoscale size of the electrospinning products provides unique microstructure, and the technology facilitates the production of structurally different membranes, or the modification and functionalization of membranes, which makes it possible to solve the membrane fouling problem. Therefore, many current studies have attempted to use electrospinning in MBRs to address membrane fouling and ultimately improve treatment efficacy. Meanwhile, in addition to solving the problem of membrane fouling, the fabrication technology of electrospinning also shows great advantages in constructing thin porous fiber membrane materials with controllable surface wettability and layered structure, which is helpful for the performance enhancement of MBR and expanding innovation. This paper systematically reviews the application and research progress of electrospinning in MBRs. Firstly, the current status of the application of electrospinning technology in various MBRs is introduced, and the relevant measures to solve the membrane fouling based on electrospinning technology are analyzed. Subsequently, some new types of MBRs and new application areas developed with the help of electrospinning technology are introduced. Finally, the limitations and challenges of merging the two technologies are presented, and pertinent recommendations are provided for future research on the use of electrospinning technology in membrane bioreactors.

Enhanced co-digestion of sewage sludge and food waste using novel electrochemical anaerobic membrane bioreactor (EC-AnMBR)

Membrane fouling remains a big challenge hindering the wide-application of anaerobic membrane bioreactor (AnMBR) technology. In this study, an electrochemical anaerobic membrane bioreactor (EC-AnMBR) was developed by coupling electrochemical regulation to enhance co-digestion of sewage sludge and food waste and mitigate membrane fouling. The highest methane production (0.12 ± 0.02 L/L_reactor/day) and net energy recovery (31.82 kJ/day) were achieved under the optimum conditions of 0.8 V, hydraulic retention time of 10 days and solids retention time of 50 days. Electrochemical regulation accelerated the mineralization of high-molecular-weight organics and reinforced the membrane antifouling ability by inducing electrostatic repulsive force and electrochemical oxidation. Besides, symbiotic relationships among functional microorganisms (Spirochaetes, Methanolinea, etc.) were enhanced, improving the hydrolysis and methanogenesis processes of complex organics and the long-term stability. This study confirms the technical feasibility of EC-AnMBR in treating high-solid biowastes, and provides the fundamental data to support its application in real-world scenarios.

In-situ biogas upgrading with H2 addition in an anaerobic membrane bioreactor (AnMBR) digesting waste activated sludge

Biological in-situ biogas upgrading is a promising approach for sustainable energy-powered technologies. This method increases the CH₄ content in biogas via hydrogenotrophic methanogenesis with an external H₂ supply. In this study, an anaerobic membrane bioreactor (AnMBR) was employed for in-situ biogas upgrading. The AnMBR was operated in semi-batch mode using waste activated sludge as the substrate. Pulsed H₂ addition into the reactor and biogas recirculation effectively increased the CH₄ content in the biogas. The addition of 4 equivalents of H₂ relative to CO₂ did not lead to appreciable biogas upgrading, although the acetate concentration increased significantly. When 11 equivalents of H₂ were introduced, the biogas was successfully upgraded, and the CH₄ content increased to 92%. The CH₄ yield and CH₄ production rate were 0.31 L/g-VS_input and 0.086 L/L/d, respectively. In this phase of the process, H₂ addition increased the acetate concentration and the pH because of CO₂ depletion. Compared with a continuously-stirred tank reactor, the AnMBR system attained higher CH₄ content, even without the addition of H₂. The longer solid retention time (100 d) in the AnMBR led to greater degradation of volatile solids. Severe membrane fouling was not observed, and the transmembrane pressure remained stable under 10 kPa for 117 d of continuous filtration without cleaning of the membrane. The AnMBR could be a promising reactor configuration to achieve in-situ biogas upgrading during sludge digestion.

A review on anaerobic membrane bioreactors for enhanced valorization of urban organic wastes: Achievements, limitations, energy balance and future perspectives

Sustainable urban development is threatened by an impending energy crisis and large amounts of organic wastes generated from the municipal sector among others. Conventional waste management methods involve greenhouse gas (GHG) emission and limited resource recovery, thus necessitating advanced techniques to convert such wastes into bioenergy, bio-fertilizers and valuable-added products. Research and application experiences from different scale applications indicate that the anaerobic membrane bioreactor (AnMBR) process is a kind of high-rate anaerobic digester for urban organic wastes valorization including food waste and waste sludge, while the research status is still insufficiently summarized. Through compiling recent achievements and literature, this review will focus on the following aspects, including AnMBR treatment performance and membrane fouling, technical limitations, energy balance and techno-economic assessment as well as future perspectives. AnMBR can enhance organic wastes treatment via complete retention of functional microbes and suspended solids, and timely separation of products and potential inhibitory substances, thus improving digestion efficiency in terms of increased organics degradation rates, biogas production and process robustness at a low footprint. When handling high-solid organic wastes, membrane fouling and mass transfer issues can be the challenges limiting AnMBR applications to a wet-type digestion, thus countermeasures are required to pursue extended implementations. A conceptual framework is proposed by taking various organic wastes disposal and final productions (permeate, biogas and biosolids) utilization into consideration, which will contribute to the development of AnMBR-based waste-to-resource facilities towards sustainable waste management and more economic-environmental benefits output.

Phosphorus Recovery by Adsorption from the Membrane Permeate of an Anaerobic Membrane Bioreactor Digesting Waste-Activated Sludge

The recovery of phosphorus (P) from waste activated sludge (WAS) is a promising approach for sustainable resource management. During the anaerobic digestion of WAS, orthophosphate is released, and this P species is favorable for adsorption recovery. In the present study, an anerobic membrane bioreactor (AnMBR) with a P-adsorption column was developed to generate biogas from WAS and to recover P from membrane permeate simultaneously. The effects of the hydraulic retention time (HRT) and solid retention time (SRT) of the AnMBR on P solubilization were investigated. As a result, the maximum P solubilization was 21% when the HRT and SRT were 45 days and 100 days, respectively. Orthophosphate in the membrane permeate was adsorbed and recovered using a mesoporous material called zirconium sulfate–surfactant micelle mesostructure (ZS) in the column. The adsorbed P could be desorbed from the ZS with a NaOH solution, and P was recovered as a concentrated solution by a factor of 25. When the HRT was 19 days, the biogas yield and biogas production rate were 0.26 L/g-VSinput and 0.123 L/L/d, respectively. The average methane content in the biogas was 80%. The developed membrane-based process may be effective for resource recovery from WAS.

Digestion performance and contributions of organic and inorganic fouling in an anaerobic membrane bioreactor treating waste activated sludge

This study evaluates the performance of an anaerobic membrane bioreactor (AnMBR) digesting waste activated sludge. A digestion reactor equipped with an external hollow fiber microfiltration membrane module was operated in continuous-mode for 248 days. The system demonstrated 56% volatile solids degradation at an organic loading rate of 0.40 g-VS/(L·d) in 15 days of hydraulic retention time. The average methane content in the biogas produced was 76% which is considerably high compared to that from a typical continuously stirred tank reactor. The transmembrane pressure remained under 12 kPa without membrane cleaning during the experimental period due to low filtration flux (0.01-0.07 m/d) and cross-flow-mode filtration. Ex situ membrane cleaning revealed that physically irreversible fouling was the dominant form of membrane fouling. Inorganic and organic fouling accounted for 16% and 45% of total membrane fouling, respectively.

An anaerobic membrane bioreactor - membrane distillation hybrid system for energy recovery and water reuse: Removal performance of organic carbon, nutrients, and trace organic contaminants

In this study, a direct contact membrane distillation (MD) unit was integrated with an anaerobic membrane bioreactor (AnMBR) to simultaneously recover energy and produce high quality water for reuse from wastewater. Results show that AnMBR could produce 0.3-0.5L/g COD_added biogas with a stable methane content of approximately 65%. By integrating MD with AnMBR, bulk organic matter and phosphate were almost completely removed. The removal of the 26 selected trace organic contaminants by AnMBR was compound specific, but the MD process could complement AnMBR removal, leading to an overall efficiency from 76% to complete removal by the integrated system. The results also show that, due to complete retention, organic matter (such as humic-like and protein-like substances) and inorganic salts accumulated in the MD feed solution and therefore resulted in significant fouling of the MD unit. As a result, the water flux of the MD process decreased continuously. Nevertheless, membrane pore wetting was not observed throughout the operation.

Development of novel polysulfone membranes with embedded zirconium sulfate-surfactant micelle mesostructure for phosphate recovery from water through membrane filtration

We prepared novel membranes that could adsorb phosphate from water through membrane filtration for use in a phosphate recovery system. Zirconium sulfate surfactant micelle mesostructure (ZS), which was the phosphate adsorbent, was embedded in a polysulfone matrix and flat sheet ultrafiltration membranes were made by nonsolvent induced phase separation. Scanning electron microscopy showed that the ZS particles existed on both the top surface and in the internal surface of the membrane. Increases in ZS content led to greater pure water flux because of increases in the surface porosity ratio. The amount of phosphate adsorbed on the membrane made from the polymer solution containing 10.5 wt% ZS was 0.071 mg P/cm² (64.8 mg P/g-ZS) during filtration of 50 mg P/L synthetic phosphate solution. The membrane could be repeatedly used for phosphate recovery after regeneration by filtration of 0.1 M NaOH solution to desorb the phosphate. We applied the membrane to treat the effluent from an anaerobic membrane bioreactor as a real sample and successfully recovered phosphate.