The enhancement of the hydrolysis of bamboo biomass in ionic liquid with chitosan-based solid acid catalysts immobilized with metal ions

Simultaneous saccharification of hemicellulose and cellulose of corncob in a one-pot system using catalysis of carbon based solid acid from lignosulfonate

The drive towards sustainable chemistry has inspired the development of active solid acids as catalysts and ionic liquids as solvents for an efficient release of sugars from lignocellulosic biomass for future biorefinery practices. Carbon-based solid acid (SI-C-S-H2O2) prepared from sodium lignosulfonate, a waste of the paper industry, was used with water or ionic liquid to hydrolyze corncob in this study. The effects of various reaction parameters were investigated in different solvent systems. The highest xylose yield of 83.4% and hemicellulose removal rate of 90.6% were obtained in an aqueous system at 130 °C for 14 h. After the pretreatment, cellulase was used for the hydrolysis of residue and the enzymatic digestibility of 92.6% was obtained. Following these two hydrolysis steps in the aqueous systems, the highest yield of total reducing sugar (TRS) was obtained at 88.1%. Further, one-step depolymerization and saccharification of corncob hemicellulose and cellulose to reducing sugars in an IL-water system catalyzed by SI-C-S-H2O2 was conducted at 130 °C for 10 h, with a high TRS yield of 75.1% obtained directly. After recycling five times, the solid acid catalyst still showed a high catalytic activity for sugar yield in different systems, providing a green and effective method for lignocellulose degradation.

Construction of an enzymatic shuttling compartment based on reverse micellar for bamboo biomass hydrolysis in ionic liquids

The enzymatic saccharification of regenerated lignocellulose must occur separately due to the toxicity of ionic liquids to cellulase. Therefore, it is important to develop a biocompatible IL-cellulase system which effectively achieves activation and saccharification of lignocellulose. For this purpose, a dual-phase "enzyme-shuttling compartment" was constructed in this study. Tween 80 was found to form reverse micelles in the isooctane-IL two-liquid phase, acting as a microenvironment that maintains the energetic conformation of the reactive cellulase. The activated bamboo biomass was enzymatically hydrolyzed in 20% (w/v) 1-ethyl-3-methylimidazolium dimethyl phosphate and 50 mM citrate buffer at 50 °C, achieving a high total reducing sugar yield of 71.2% and maintaining an enzymatic activity of 91.2% after 24 h. Thus, an efficient system with the simultaneous activation and saccharification of natural biomass was successfully developed in a one-pot procedure at low temperatures, ensuring large-scale biomass conversion into biofuels and biological products.

One-Pot Deconstruction and Conversion of Lignocellulose Into Reducing Sugars by Pyridinium-Based Ionic Liquid-Metal Salt System

Constantly decreasing fossil resources and exceeding energy demands are the most alarming concerns nowadays. The only way out is to develop efficient, safe, and economical biomass processing protocols that can lead toward biofuels and fine chemicals. This research is one of such consequences involving the deconstruction and conversion of wheat straw carbohydrate constituents into reducing sugars via one-pot reaction promoted by Lewis acidic pyridinium-based ionic liquids (PyILs) mixed with different metal salts (MCl). Various parameters such as the type of metal salt, loading amount of metal salt, time, temperature, particle size of biomass, and water content which affect the deconstruction of wheat straw have been evaluated and optimized. Among the studied ionic liquid (IL) and metal salt systems, the best results were obtained with [BMPy]+CoCl 3 - . The dinitrosalicylic acid (DNS) assay was used to determine the percentage of total reducing sugars (TRS) generated during treatment of wheat straw. The deconstructed wheat straw was characterized with various analytical tools, that is, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and X-ray powder diffraction (XRD) analyses. The IL-metal salt system was recycled for subsequent treatment of wheat straw. Statistical parameters were calculated from analysis of variance (ANOVA) at the 0.05 level of confidence.

Effect of Pre-Corrected pH on the Carbohydrate Hydrolysis of Bamboo during Hydrothermal Pretreatment

To confirm the prospects for application of pre-corrected pH hydrothermal pretreatment in biorefineries, the effects of pH on the dissolution and degradation efficiency of carbohydrates were studied. The species composition of the hydrolysate was analyzed using high efficiency anion exchange chromatography and UV spectroscopy. The result showed that the greatest balance between the residual solid and total dissolved solids was obtained at pH 4 and 170 °C. Maximum recovery rates of cellulose and lignin were as expected, whereas hemicellulose had the least recovery rate. The hemicellulose extraction rate was 42.19%, and the oligomer form accounted for 93.39% of the product. The physicochemical properties of bamboo with or without pretreatment was characterized. Compared with the traditional hydrothermal pretreatment, the new pretreatment bamboo has higher fiber crystallinity and thermal stability. In the pretreatment process, the fracture of β-aryl ether bond was inhibited and the structural dissociation of lignin was reduced. The physicochemical properties of bamboo was protected while the hemicellulose was extracted efficiently. It provides theoretical support for the efficient utilization of all components of woody biomass.

Simultaneous pretreatment and hydrolysis of hardwood biomass species catalyzed by combination of modified activated carbon and ionic liquid in biphasic system

The study highlights one pot conversion of hardwood biomass into Total reducing sugars (TRS) and 5-Hydroxymethyl Furfural (5-HMF). Synergistic effect of dilute H₂SO₄ and ionic liquid in a reaction time of 60 min at 120 °C was examined. Hydrolysis of Catalpa (Catalpa Bignonioides), Indian Rosewood (Dalbergia Sissoo), Chinaberry (Melia Azedarach) and Babool (Acacia Nilotica) catalyzed by modified activated carbon leads to significant product yield. Maximum yield was obtained using Catalpa wood i.e. 92.67% TRS and 70.36% 5-HMF under optimized conditions. Biomass before and after pretreatment subjected to FT-IR, XRD and compositional analysis determined the structural changes. Further, the effect of electrolytes namely; AlCl₃, MgCl₂, NaCl and KCl were evaluated. Results revealed that using optimized concentration of each electrolyte promoted the conversion to 96.56% (TRS) and 86.23% (5-HMF) using AlCl₃ (4 wt%) for Catalpa wood. Addition of DMSO with optimized electrolyte concentration improves the partition coefficient (3.3) and yield to 88.29% (5-HMF).

Synergistic effect of modified activated carbon and ionic liquid in the conversion of microcrystalline cellulose to 5-Hydroxymethyl Furfural

This study highlights cellulose conversion for the production of 5-Hydroxymethyl Furfural using synergistic effect of modified activated carbon and ionic liquid under moderate reaction conditions. Modified Activated carbon after acid treatment (ACS, ACP, ACH) were used to examine their catalytic activity on hydrolysis of cellulose in [Bmim]Cl medium. Changes in physical-chemical properties were characterized using XRD, FE-SEM, EDX, FT-IR and BET surface area analyser techniques. Modified activated carbon is found competent in enhancing cellulose conversion to Total Reducing Sugars and 5-Hydroxymethyl Furfural. Further, the effect of six metal ions i.e Cr⁺³, Fe⁺³, Cu⁺², Zn⁺², K⁺ and Al⁺³ impregnated on sulfuric acid treated activated carbon (ACS) was explored. The catalytic performance improves with the impregnation of metals in the decreasing order: Cr⁺³> Fe⁺³> Cu⁺²> Zn⁺²> Al⁺³> K⁺. These modified catalysts with ionic liquid as solvent are found promising to generate eco-friendly system and cost effective cellulose conversion to value added products.

Ultrasound-ionic liquid enhanced enzymatic and acid hydrolysis of biomass cellulose

The purpose of this paper was to investigate the effect of ultrasound-ionic liquid (IL) pretreatment on the enzymatic and acid hydrolysis of the sugarcane bagasse and wheat straw. The lignocellulosic biomass was dissociated in ILs ([Bmim]Cl and [Bmim]AOC) aided by ultrasound waves. Sonication was performed at different frequencies (20, 28, 35, 40, and 50kHz), a power of 100W, a time of 30min and a temperature of 80°C. The changes in the structure and crystallinity of the cellulose were studied by Fourier transform infrared (FT-IR), X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). The amounts of the total reducing sugars, glucose, cellobiose, xylose and arabinose in the hydrolysates were determined. The results of FT-IR, XRD and TGA revealed that the structure of cellulose of both biomass samples remained intact after the pretreatment, but the crystallinity decreased. The enzymatic and acid hydrolysis of the biomass samples pretreated with the ultrasound-IL result in higher yields of the reducing sugars compared with the IL-pretreated sample. Enzymatic hydrolysis of bagasse and wheat straw pretreated with [Bmim]Cl-ultrasound resulted in maximal yields of glucose at 20kHz (40.32% and 53.17%) and acid hydrolysis resulted in maximal yields of glucose at 40kHz (33.32% and 48.07%). Enzymatic hydrolysis of bagasse and wheat straw pretreated with [Bmim]OAc-ultrasound show maximal yields of glucose at 28kHz and acid hydrolysis at 50kHz. Combination of ultrasound with [Bmim]OAc is more effective than [Bmim]Cl in terms of the yields of reducing sugar.

Pretreatment of corn stover by solid acid for d-lactic acid fermentation

Solid acid is a new acid that is safe and green, which has been widely used in the fields of acid pickling. In this study, we adopted solid acid to pretreat corn stover and used the pretreated corn stover in the fermentation of d-lactic acid. Finally, we obtained optimal conditions for the pretreatment of corn stover by solid acid: digestion temperature of 120°C, digestion time of 80min, and solid acid concentration of 1.5%. Then adding cellulase of 30FPU/g, the conversion rate of glucose reached 71.06% after enzymatic hydrolysis for 72h. In addition, the changes of corn stover structure after pretreatment were further represented by using scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). At the same time, we used the pretreated corn stover as fermentation substrate and Lactobacillus. delbrueckii sp. bulgaricus as the starting strain to produce d-lactic acid. The yield reached 18g/L, with the optical purity being 99%e.e. This research has provided a new way to comprehensively utilizae corn stover.

Enhanced hydrolysis of bamboo biomass by chitosan based solid acid catalyst with surfactant addition in ionic liquid

Surfactants were used for the hydrolysis of bamboo biomass to enhance lignocellulose hydrolysis. Tween 80, polyethylene glycol 4000 (PEG 4000), and sodium dodecyl sulfate (SDS) were tested as surfactants for improving the bamboo hydrolysis with a novel sulfonated cross-linked chitosan solid acid catalyst (SCCAC) in ionic liquid (IL). Compared to the use of only SCCAC in 1-Butyl-3-methylimidazolium chloride ([BMIM]Cl), the surfactants facilitated hydrolysis and improved the yield of total reducing sugar (TRS) under the same conditions. Tween 80 was the most effective surfactant, with a TRS yield of 68.01% achieved at 120°C after 24h. Surfactants broke the lignocellulose structure, promoted lignin removal, and increased positive interactions between cellulose and the catalyst, which were favorable for hydrolysis. This novel surfactant-assisted hydrolysis strategy with SCCAC and IL as the solvent demonstrated a promise for the large-scale transformation of biomass into biofuels and bioproducts.