Microalgal cultivation with biogas slurry for biofuel production

Manipulation of artificial light environment improves plant biomass and fruit nutritional quality in tomato

INTRODUCTION

The yield and quality of tomato (Solanum lycopersicum. L) are often decreased when plants suffer from low light intensity and short-photoperiod in winter. Manipulation of the artificial light environment is a feasible technology to promote off-seasonal production and improve fruit nutritional quality in the greenhouse.

OBJECTIVES

Here we aim to investigate the appropriate balance between red (R) and blue (B) light to improve tomato yield and quality traits.

METHODS

Biochemical, molecular and genetic analysis were used to study the photosynthetic traits, pigments, sugar and volatile accumulation pathway genes.

RESULTS

Tomato plants subjected to R1B0.8, a ratio between monochromatic red (R) and blue (B) light, for 16 h photoperiod showed significantly increased chlorophyll and biomass accumulation compared to white (W) light treatment. R1B0.8 light treatment enhanced electron transfer efficiency and photosynthetic capacity by improving the light energy utilization rate and inducing photosystem core subunit genes (SlPsaC, SlPsaB, SlPsaA) and light-harvesting complex genes (SlLHCB/A). Compared to W light, R1B0.8 light also induced carotenoid accumulation and accelerated fruit ripening, which was associated with the upregulation of carotenoid biosynthesis genes (SlPSY1, SlPDS) and ethylene biosynthesis genes (SlACS2, SlACO2) in tomato fruits. Moreover, fruits exposed to R1B0.8 light treatments significantly improved fructose and glucose accumulation and the expression of the volatile-related gene (SlAADC1a) and flavor-related gene (SlGORKY).

CONCLUSION

Our results showed that R1B0.8 light with a 16 h photoperiod could prominently promote photosynthetic traits, pigments, sugar and volatile accumulation in tomato. Our findings on the manipulation of artificial light environments in protected horticulture offer possibilities for enhancing crop yield and quality to meet the increasing global demand for food.

The effect of initial inoculation amount of microalgae on synergistic purification of biogas slurry

In this study, Chlorella and Scenedesmus were inoculated in biogas slurry medium with initial inoculum (OD680) of 0.05, 0.1, 0.2, and 0.3, respectively, and 5% CO2 was continuously injected. The study aimed to examine the carbon sequestration capacity of Chlorella and Scenedesmus, as well as the effectiveness of removing pollutants such as TN, TP, and COD in biogas slurry medium. Additionally, an economic efficiency analysis of energy consumption was conducted. The group with an initial inoculum (OD680) of 0.3 for both types of microalgae exhibited better tolerance to pollutants, entered the logarithmic growth stage earlier, promoted nutrient removal, achieved higher energy efficiency, and reduced carbon emissions compared to the other groups. The highest carbon sequestration rates were 18.03% for Chlorella and 11.05% for Scenedesmus. Furthermore, Chlorella demonstrated corresponding nutrient removal efficiencies of 83.03% for TN, 99.84% for TP, and 90.06% for COD, while Scenedesmus exhibited removal efficiencies of 66.35% for TN, 98.74% for TP, and 77.71% for COD. The highest energy efficiency for pollutants and CO2 removal rates for Chlorella were 49.51 ± 2.20 and 9.91 ± 0.44 USD-1, respectively. In conclusion, the findings demonstrate the feasibility of using microalgae for simultaneous purification of biogas and biogas slurry.

Performance evaluation of typical flocculants for efficient harvesting of Chlorella sorokiniana under different carbon application modes

In this study, the growth characteristics of microalgae cultured with different carbon sources were analyzed, and the flocculation characteristics under the influence of carbon sources were evaluated using three typical flocculants. The results showed that the organic carbon sources could significantly increase the content of extracellular proteins in microalgae. Specifically, the extracellular protein concentrations of microalgae cultured with pure BG-11, ethanol, sodium acetate and glucose were 18.2 29.2, 97.3, and 34.7 mg/g, respectively. During the flocculation process, microalgae cultured with sodium acetate exhibited a weak response to the flocculant because of excessive extracellular proteins inhibited flocculation. In addition, the flocculation efficiency was also less than 50.0% cultured with sodium acetate in all pH test ranges when alum and chitosan were used as flocculants. It could be inferred that the flocculant initially happened to charge neutralization with the negatively charged proteins in the solution and then bridged the charges with the microalgae. These findings provide insights into the effects of different carbon sources on microalgal flocculation, promising organic integration of microalgae wastewater treatment and harvesting.

Bioengineering strategies of microalgae biomass for biofuel production: recent advancement and insight

Algae-based biofuel developed over the past decade has become a viable substitute for petroleum-based energy sources. Due to their high lipid accumulation rates and low carbon dioxide emissions, microalgal species are considered highly valuable feedstock for biofuel generation. This review article presented the importance of biofuel and the flaws that need to be overcome to ensure algae-based biofuels are effective for future-ready bioenergy sources. Besides, several issues related to the optimization and engineering strategies to be implemented for microalgae-based biofuel derivatives and their production were evaluated. In addition, the fundamental studies on the microalgae technology, experimental cultivation, and engineering processes involved in the development are all measures that are commendably used in the pre-treatment processes. The review article also provides a comprehensive overview of the latest findings about various algae species cultivation and biomass production. It concludes with the most recent data on environmental consequences, their relevance to global efforts to create microalgae-based biomass as effective biofuels, and the most significant threats and future possibilities.

Influencing factors for nutrient removal from piggery digestate by coupling microalgae and electric field

Microalgae show great potential for nutrient removal from piggery digestate. However, full-strength piggery digestate have been found to severely inhibit microalgal growth. In this study, microalgae were coupled into the electric field (EF)system to form an electric field-microalgae system (EFMS). The effects of EF characteristics and environmental conditions on the growth of Desmodesmus sp. CHX1 and the removal of nitrogen and phosphorus in EFMS were explored. The results indicated that the optimal EF parameters for forming a fine EFMS were electrode of Zn (anode)/graphite (cathode), electric frequency of three times per day (10 min/time) and voltage of 12 V. The suitable light intensity and microalgae inoculation concentration for the EFMS were 180 μmol photons/(m²·s) and 0.2 g/L, respectively. Ammonium nitrogen and total phosphorus removal efficiencies were 65.38% and 96.16% in the piggery digestate by EFMS under optimal conditions. These results indicate that EFMS is a promising technology for nutrient removal from piggery digestate.

Synergistic effects of rice husk biochar and aerobic composting for heavy oil-contaminated soil remediation and microbial community succession evaluation

Soil petroleum pollution is an urgent problem in modern society, which seriously threatens the ecological balance and environmental safety. Aerobic composting technology is considered economically acceptable and technologically feasible for the soil remediation. In this study, the combined experiment of aerobic composting with the addition of biochar materials was conducted for the remediation of heavy oil-contaminated soil, and treatments with 0, 5, 10 and 15 wt% biochar dosages were labeled as CK, C5, C10 and C15, respectively. Conventional parameters (temperature, pH, NH₄⁺-N and NO₃^--N) and enzyme activities (urease, cellulase, dehydrogenase and polyphenol oxidase) during the composting process were systematically investigated. Remediation performance and functional microbial community abundance were also characterized. According to experimental consequences, removal efficiencies of CK, C5, C10 and C15 were 48.0%, 68.1%, 72.0% and 73.9%, respectively. The comparison with abiotic treatments corroborated that biostimulation rather than adsorption effect was the main removal mechanism during the biochar-assisted composting process. Noteworthy, the biochar addition regulated the succession process of microbial community and increased the abundance of microorganisms related to petroleum degradation at the genus level. This work demonstrated that aerobic composting with biochar amendment would be a fascinating technology for petroleum-contaminated soil remediation.

Anaerobic digestate valorization beyond agricultural application: Current status and prospects

The flourishment of anaerobic digestion emphasizes the importance of digestate valorization, which is essential in determining the benefits of the anaerobic digestion process. Recently the perception of digestate gradually shifted from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. Land application of digestate should be the simplest way for digestate valorization, while legislation restriction and environmental issues emphasize the necessity of novel valorization methods. This review then outlined the current methods for solid/liquid digestate valorization, nutrient recovery, microalgae cultivation, and integration with biological and thermochemical processes. The novel valorization routes proposed were summarized, with their challenges and prospects being discussed. Integrating anaerobic digestion with thermochemical methods such as hydrothermal carbonization should be a promising strategy due to the potential market value of hydrochar/biochar-derived products.

Biochar aerogel enhanced remediation performances for heavy oil-contaminated soil through biostimulation strategy

Petroleum leakages can seriously damage the soil environment and cause a persistent harm to human health, due to the release of heavy oil pollutants with a high viscosity and high molecular weight. In this paper, biochar aerogel materials were successfully prepared under 600, 700 and 800 ℃ (accordingly labeled as 600-aerogel, 700-aerogel and 800-aerogel) with green, sustainable and abundant sisal leaves as raw materials for the remediation of heavy oil-contaminated soil. The remediation performances of biochar aerogel supplement for heavy oil-contaminated soil were investigated, while microbial abundance and community structure were characterized. The degradation efficiency of 600-aerogel, 700-aerogel and 800-aerogel treatments was accordingly 80.69%, 86.04% and 86.62% after 60 days. Apart from adsorption behavior, biostimulation strengthened the degradation efficiency, according to findings from first-order degradation kinetics. Biochar aerogel supplement basically increased genera microbial abundance for Sinomonas, Streptomyces, Sphingomonas and Massilia with petroleum degradation abilities through microorganisms' biostimulation. Sinomonas as the dominant genus with the highest abundance probably contributed much higher capacities to heavy oil degradation. This study can provide an inspiring reference for the development of green carbon-based materials to be applied in heavy oil-contaminated soils through biostimulation mechanisms.

Simultaneous chromium removal and lipid accumulation by microalgae under acidic and low temperature conditions for promising biodiesel production

Microalgae have become the hotspot of recent researches as heavy metals (HMs) adsorbent and biodiesel production feedstock. In this study, the cell growth, lipid production and Cr⁶⁺ removal of Parachlorella kessleri R-3 at pH 3.5 and 15 °C were investigated. It was found that low concentration of Cr⁶⁺ (0.5 to 2 mg/L) promoted the algal growth, whereas Cr⁶⁺ higher than 5 mg/L inhibited the growth of P. kessleri R-3. Biomass concentration (2.40 g/L) and lipid productivity (131.79 mg/L d^-1) reached the highest at 2 mg/L Cr⁶⁺, and lipid content (61.03 %) reached the highest at 5 mg/L Cr⁶⁺. The maximum Cr⁶⁺ removal efficiency of 91 % was obtained at 0.5 mg/L Cr⁶⁺ treatment. Furthermore, fatty acid composition analysis showed that strain R-3 had a high C16-18 content of 74.88-89.21 %. This study provides new insight into the treatment of HMs and lipid production in cold regions.

Growth Parameters of Various Green Microalgae Species in Effluent from Biogas Reactors: The Importance of Effluent Concentration

The use of liquid waste as a feedstock for cultivation of microalgae can reduce water and nutrient costs and can also be used to treat wastewater with simultaneous production of biomass and valuable products. This study applied strategies to treat diluted anaerobic digester effluent (ADE) as a residue of biogas reactors with moderate (87 ± 0.6 mg L^-1; 10% ADE) and elevated NH₄⁺-N levels (175 ± 1.1 mg L^-1; 20% ADE). The effect of ADE dilution on the acclimatization of various microalgae was studied based on the analysis of the growth and productivity of the tested green algae. Two species of the genus Chlorella showed robust growth in the 10-20% ADE (with a maximum total weight of 3.26 ± 0.18 g L^-1 for C. vulgaris and 2.81 ± 0.10 g L^-1 for C. sorokiniana). The use of 10% ADE made it possible to cultivate the strains of the family Scenedesmaceae more effectively than the use of 20% ADE. The growth of Neochloris sp. in ADE was the lowest compared to other microalgal strains. The results of this study demonstrated the feasibility of introducing individual green microalgae into the processes of nutrient recovery from ADE to obtain biomass with a high protein content.

Microalgal cultivation for the upgraded biogas by removing CO2, coupled with the treatment of slurry from anaerobic digestion: A review

Biogas is the gaseous by product generated from anaerobic digestion (AD), which is mainly composed of methane and CO2. Numerous independent studies have suggested that microalgae cultivation could achieve high efficiency for nutrient uptake or CO2 capture from AD, respectively. However, there is no comprehensive review on the purifying slurry from AD and simultaneously upgrading biogas via microalgal cultivation technology. This paper aims to fill this gap by presenting and discussing an information integration system based on microalgal technology. Furthermore, the review elaborates the mechanisms, configurations, and influencing factors of integrated system and analyzes the possible challenges for practical engineering applications and provides some feasibility suggestions eventually. There is hope that this review will offer a worthwhile and practical guideline to researchers, authorities and potential stakeholders, to promote this industry for sustainable development.

A new cutting-edge review on the bioremediation of anaerobic digestate for environmental applications and cleaner bioenergy

Circular agriculture and economy systems have recently emerged around the world. It is a long-term environmental strategy that promotes economic growth and food security while reducing negative environmental consequences. Anaerobic digestion (AD) process has a high contribution and effective biodegradation route for bio-wastes valorization and reducing greenhouse gases (GHGs) emissions. However, the remaining massive digestate by-product contains non-fermented organic fractions, macro and/or micro-nutrients, heavy metals, and metalloids. Direct application of digestate in agriculture negatively affected the properties of the soil due to the high load of nutrients as well as the residuals of GHGs are emitted to the environment. Recycling and valorizing of anaerobic digestate is the main challenge for the sustainable biogas industry and nutrients recovery. To date, there is no global standard process for the safe digestate handling. This review described the biochemical composition and separation processes of anaerobic digestate. Further, advanced physical, chemical, and biological remediation's of the diverse digestate are comprehensively discussed. Moreover, recycling technologies such as phyco-remediation, bio-floc, and entomoremediation were reviewed as promising solutions to enhance energy and nutrient recovery, making the AD technology more sustainable with additional profits. Finally, this review gives an in-depth discussion of current biorefinery technologies, key roles of process parameters, and identifies challenges of nutrient recovery from digestate and prospects for future studies at large scale.

Evaluation of key microbial community succession and enzyme activities of nitrogen transformation in pig manure composting process through multi angle analysis

This experiment aimed to investigate changes in enzyme activity, microbial succession, and nitrogen conversion caused by different initial carbon-to-nitrogen ratios of 25:1, 35:1 and 20:1 (namely CK, T1 and T2) during pig manure composting. The results showed that the lower carbon-to-nitrogen ratio (T2) after composting retained 19.64 g/kg of TN which was more than 16.74 and 17.32 g/kg in treatments of CK and T1, respectively, but excessive conversion of ammonium nitrogen to ammonia gas resulted in nitrogen loss. Additional straw in T1 could play the role as a bulking agent. After composting, TN in T1 retained the most, and TN contents were 63.51 %, 67.34 % and 56.24 % in CK, T1 and T2, respectively. Network analysis indicated that many types of microorganisms functioned as a whole community at various stages of nitrogen cycle. This study suggests that microbial community structure modification might be a good strategy to reduce ammonium nitrogen loss.

Biochar amendment of aerobic composting for the effective biodegradation of heavy oil and succession of bacterial community

Soil pollution caused by petroleum pollutants from production trade activities in petroleum-related factories contributes serious threat to the environment and human health. Composting is technically-feasible and cost-effective in the biodegradation of heavy oil pollutants. This composting experiment was developed with four rice husk biochar (RHB) concentrations of 0 wt% (CK), 5 wt% (S1), 10 wt% (S2) and 15 wt% (S3) for the degradation of heavy oil. The results showed that RHB amendment could strengthen the degradation performance of heavy oil, and the degradation efficiencies for CK, S1, S2 and S3 were 59.67%, 65.00%, 73.29% and 74.82%, respectively. Microbial community succession process was investigated through high-throughput sequencing technology, and the RHB addition regulated bacterial community succession and further effectively facilitated the biodegradation of heavy oil in composting. This study substantiated that biochar materials-amended aerobic composting would be a promising strategy for the biodegradation of petroleum pollutants.

Comparative Assessment of Nitrogen Concentration Effect on Microalgal Growth and Biochemical Characteristics of Two Chlorella Strains Cultivated in Digestate

Microalgae have been recently recognized as a promising alternative for the effective treatment of anaerobic digestion effluents. However, to date, a widely applied microalgae-based process is still absent, due to several constraints mainly attributed to high ammonia concentrations and turbidity, both hindering microalgal growth. Within this scope, the purpose of the present study was to investigate the performance of two Chlorella strains, SAG 211-11b and a local Algerian isolate, under different nitrogen levels, upon ammonia stripping. The experiments were performed on cylindrical photobioreactors under controlled pH (7.8 ± 0.2) and temperature (25 ± 2 °C). Cultures were monitored for biomass production and substrate consumption. After sampling at the beginning of the stationary phase of growth (12th day) and after the maturation of the cells (24th day), an analysis of the produced biomass was conducted, in terms of its biochemical components. The local isolate grew better than C. vulgaris 211-11b, resulting in 1.43 mg L−1 biomass compared to 1.02 mg L−1 under 25 mg NH4-N L−1, while organic carbon and nutrient consumption varied between the two strains and different conditions. Concerning biomass quality, a high initial NH4-N concentration led to high protein content, while low nitrogen levels favored fatty acid (FA) accumulation, though the production of pigments was inhibited. In particular, the protein content of the final biomass was determined close to 45% of the dry weight in all experimental scenarios with adequate nitrogen, while proteins decreased, and the fatty acids approached 20% in the case of the local isolate grown on the substrate with the lowest initial ammonium nitrogen (25 mg NH4-N L−1). The novelty of the present work lies in the comparison of a microalga with industrial applications against a local isolate of the same species, which may prove to be even more robust and profitable.

A Review of Biomass Briquette Binders and Quality Parameters

The adverse effect of the use of fossil fuels on the environment and public health has given rise to a sustained renewable energy research and development. An important component of global renewable energy mix is the use of loose biomass, including agricultural and forestry residues, to produce solid fuels in the form of briquettes. Briquettes play a significant role in bioenergy mix in developing and developed countries. The production of biomass briquettes often entails the collection, transportation, storage, processing, and compaction of loose biomass that meet specific quality parameters. The densification process often involves the addition of binders to improve the cohesive strength of the briquette material. This paper surveys recent literature from 2012 to 2021 to establish the current state of research on the use of binders in briquette production; and reviews current parameters used in assessing the quality of biomass briquettes with focus on mechanical and handling properties. While a number of quality parameters were identified, their assessment methodologies varied widely in the literature, thus necessitating standardization for comparability purposes. The review also includes factors affecting the wide production and adoption of biomass briquettes in most developing economies and proposes ways of overcoming the bottlenecks.

Attempts to alleviate inhibitory factors of anaerobic digestate for enhanced microalgae cultivation and nutrients removal: A review

Anaerobic digestion is a well-established process that is applied to treat organic wastes and convert the carbon to valuable methane gas as a source of energy. The digestate that comes out as a by-product is of a great challenge due to its high nutrient content that can be toxic in case of improper disposal to the environment. Several attempts have been done to valorize this digestate. Digestate has been considered as an interesting medium to cultivate microalgae. The nutrients available in the digestate, mainly nitrogen and phosphorus, can be an interesting supplement for microalgae growth requirement. The main obstacles of using digestate as a medium to cultivate microalgae are the dark color and the high ammonium-nitrogen concentration. The focus of this review is to discuss in detail the major attempts in research to overcome inhibition and enhance microalgae cultivation in digestate. This review initially discussed the obstacles of digestate as a medium for microalgae cultivation. Different processes to overcome inhibition were discussed including dilution, supplying additional carbon source, favoring mixotrophic cultivation and pretreatment. More emphasis in this review was given to digestate pretreatment. Among the pretreatment methods, filtration, and centrifugation were of the most applied ones. These strategies were found to be effective for turbidity and chromaticity reduction. For ammonium nitrogen removal, ammonia stripping and biological pretreatment methods were found to play a vital role. Adsorption could work both ways depending on the material used. Combining different pretreatment methods as well as including selected microalgae stains were found interesting strategies to facilitate microalgae cultivation with no dilution. This study recommend that more study should investigate the optimization of microalgae cultivation in anaerobic digestate without the need for dilution.

Effect of nano-TiO2 on humic acid utilization from piggery biogas slurry by microalgae

Resource recovery from piggery biogas slurry has become an inevitable demand for sustainable development of pig industry. Microalgae show great potential in recovering nitrogen and phosphorus from piggery slurry, but struggle to utilize organic pollutants, as most of them are inert components (e.g., humic acids, HAs). In this study, nano-TiO₂ was used to enhance the utilization of HAs by microalgae from piggery biogas slurry. Results showed that the optimal conditions for microalgal growth and HAs removal by the microalgae-TiO₂ coupling system were TiO₂ dosage of 0.30 g/L, microalgal inoculation concentration of 0.40 g/L, light intensity of 360 µmol photon/(m²·s) and temperature of 30 °C, with the microalgal chlorophyll concentration of 6.51 mg/L and HAs removal efficiency of 50.14%. Analysis of HAs composition variations in the piggery biogas slurry indicated that the decrease of HAs was caused by their decomposition into small molecules under the photocatalytic reactions of TiO₂.

Bacterial-algal coupling system for high strength mariculture wastewater treatment: Effect of temperature on nutrient recovery and microalgae cultivation

In the present study, bacterial-algal coupling system, an integration process of acidogenic fermentation and microalgae cultivation was used for high strength mariculture wastewater (HSMW) treatment, resource recovery and low-cost biomass production. The effect of temperature on Chlorella vulgaris (C. vulgaris) cultivation was investigated with culture medium of acidogenic liquid. The results showed that acidogenic liquid could be used as culture medium for C. vulgaris and higher biomass was obtained compared to control. The acidogenic liquid obtained at initial pH of 8 was the most suitable culture medium for C. vulgaris growth due to befitting C/N and considerable volatile fatty acids. Moreover, the optimum temperature for C. vulgaris cultivation was 25 °C and the removal efficiency of chemical oxygen demand (COD) and NH₄⁺-N from acidogenic liquid could reach 94.4% and 68.8%, respectively. The outcome could create an innovative value chain with environmental sustainability and economic feasibility in aquaculture industry.

A new approach for biogas slurry disposal by adopting CO2-rich biogas slurry as the flower fertilizer of Spathiphyllum: Feasibility, cost and environmental pollution potential

A new approach for biogas slurry disposal was put forward in this study through converting biogas slurry to the organic fertilizer of Spathiphyllum. The biogas slurry was firstly concentrated by vacuum distillation to reduce its volume by 80% who is called 5CBS, and then CO₂ saturated to reduce its pH to about 6.50 ± 0.20. With or without adding the exogenetic Ca, Mg and P nutrients, CO₂-rich 5CBS (i.e., CR-5CBS) was adopted as the root or foliar fertilizer to cultivate Spathiphyllum. Additionally, the commercial Spathiphyllum fertilizer was also experimented as a control. Results showed that the cases adopting CR-5CBS as the root or foliar fertilizer can obtain the agronomic traits and ornamental values of Spathiphyllum better those irrigated by the commercial fertilizer. Exogenetic nutrients added into CR-5CBS can lead to a decreased dead leaf number of Spathiphyllum, an enhanced N assimilation performance, however only a slightly improved assimilation performance of Ca, Mg and P. In terms of the fertilizer economy, CR-5CBS without exogenetic nutrient addition may be a promising for replacing the commercial Spathiphyllum fertilizer in the future. Economic and environmental pollution potential (EPP) analyses indicated that treating biogas slurry as the organic flower fertilizer can achieve a high net profit with about $ 28.89/m³-biogas slurry and a negative EPP value (-3.9), showing its profitability and environmental friendliness.

Effects of substrate types on the transformation of heavy metal speciation and bioavailability in an anaerobic digestion system

Chemical speciation can fundamentally affect the potential toxicity and bioavailability of heavy metals. The transformation of heavy metal speciation and change of bioavailability were investigated in an anaerobic digestion (AD) system using four different substrates (pig manure (PM), cattle manure (CAM), chicken manure (CHM) and rice straw (RS)). The results obtained indicated that the total contents of heavy metals in PM, CHM and CAM were higher than in RS and decreased in the order Zn > Cu > Ni > Pb > As > Cd in all substrates. Moreover, the speciation with the largest proportion for each heavy metal was the same both in the different substrates and the biogas residues. Among them, Zn, Ni, Cd and As were mainly in the reducible fraction (F2), while Cu was mainly in the oxidizable fraction (F3) and Pb occurred predominantly in the residual fraction (F4). Our results further indicated that the AD process had a greater effect on the speciation of heavy metals in CHM and PM, but less on CAM and RS. The rates of change in bioavailability followed the order PM > CHM > CAM > RS. Changes in organic matter, humic acid or local metal ion environment as a result of AD were inferred as likely mechanisms leading to the transformation of heavy metal speciation. These results enhanced our understanding of the behavior of heavy metals in AD and provided a new perspective for the treatment and disposal of the substrates.

Digestate as Sustainable Nutrient Source for Microalgae—Challenges and Prospects

The interest in microalgae products has been increasing, and therefore the cultivation industry is growing steadily. To reduce the environmental impact and production costs arising from nutrients, research needs to find alternatives to the currently used artificial nutrients. Microalgae cultivation in anaerobic effluents (more specifically, digestate) represents a promising strategy for increasing sustainability and obtaining valuable products. However, digestate must be processed prior to its use as nutrient source. Depending on its composition, different methods are suitable for removing solids (e.g., centrifugation) and adjusting nutrient concentrations and ratios (e.g., dilution, ammonia stripping). Moreover, the resulting cultivation medium must be light-permeable. Various studies show that growth rates comparable to those in artificial media can be achieved when proper digestate treatment is used. The necessary steps for obtaining a suitable cultivation medium also depend on the microalgae species to be cultivated. Concerning the application of the biomass, legal aspects and impurities originating from digestate must be considered. Furthermore, microalgae species and their application fields are essential criteria when selecting downstream processing methods (harvest, disintegration, dehydration, product purification). Microalgae grown on digestate can be used to produce various products (e.g., bioenergy, animal feed, bioplastics, and biofertilizers). This review gives insight into the origin and composition of digestate, processing options to meet requirements for microalgae cultivation and challenges regarding downstream processing and products.

Chlorella vulgaris and Its Phycosphere in Wastewater: Microalgae-Bacteria Interactions During Nutrient Removal

Microalgae-based bioenergy production is a promising field with regard to the wide variety of algal species and metabolic potential. The use of liquid wastes as nutrient clearly improves the sustainability of microalgal biofuel production. Microalgae and bacteria have an ecological inter-kingdom relationship. This microenvironment called phycosphere has a major role in the ecosystem productivity and can be utilized both in bioremediation and biomass production. However, knowledge on the effects of indigenous bacteria on microalgal growth and the characteristics of bacterial communities associated with microalgae are limited. In this study municipal, industrial and agricultural liquid waste derivatives were used as cultivation media. Chlorella vulgaris green microalgae and its bacterial partners efficiently metabolized the carbon, nitrogen and phosphorous content available in these wastes. The read-based metagenomics approach revealed a diverse microbial composition at the start point of cultivations in the different types of liquid wastes. The relative abundance of the observed taxa significantly changed over the cultivation period. The genome-centric reconstruction of phycospheric bacteria further explained the observed correlations between the taxonomic composition and biomass yield of the various waste-based biodegradation systems. Functional profile investigation of the reconstructed microbes revealed a variety of relevant biological processes like organic acid oxidation and vitamin B synthesis. Thus, liquid wastes were shown to serve as valuable resources of nutrients as well as of growth promoting bacteria enabling increased microalgal biomass production.

Response of Scenedesmus sp. to microwave treatment: Enhancement of lipid, exopolysaccharide and biomass production

The present study focuses on the use of microwave irradiation to improve the production of lipid, exopolysaccharide and biomass in the microalgae Scenedesmus sp. Microwave treatment conditions such as microwave power, duty cycle % and time was optimized to increase the biomass and lipid content of Scenedesmus sp. Microwave power 100 W, duty cycle 40 %, and 2 min treatment time led to a substantial improvement in the biomass and lipid content. Due to the simultaneous improvement in both the biomass and lipid content, the total lipid production was improved from 0.76 (microwave untreated) to 1.42 g/L (microwave treated) (12 days grown cells). In addition, with biomass and lipid content, microwave treatment also enhanced the production of Exopolysaccharides (EPS) up to 2.3-folds. Furthermore, biodiesel properties were improved to some extent after the microwave treatment. Microwave irradiation is a promising physical treatment method for microalgae to improve total lipid production.

Removal of pollutants from biogas slurry and CO2 capture in biogas by microalgae-based technology: a systematic review

Recent research interest has focused on microalgae cultivation for biogas slurry purification and biogas upgrading due to the requirement of high efficiency for nutrient uptake and CO₂ capture, with economic feasibility and environmental benefits. Numerous studies have suggested that biogas slurry purification and biogas upgrading can occur simultaneously via microalgae-based technology. However, there is no comprehensive review on this technology with respect to the nutrient removal from biogas slurry and biogas upgrading. This article summarizes microalgal cultivation with biogas slurry and biogas from anaerobic digestion. The parameters, techniques, and modes of microalgae cultivation have been discussed in detail to achieve high efficiency in biogas slurry purification and biogas upgrading. In addition, the evaluation of energy efficiency and safety has also been explored. Compared with mono-cultivation of microalgae and co-cultivation of microalgae and bacteria, microalgae-fungi symbiosis has demonstrated greater development prospect and higher energy efficiency and the energy consumption for pollutants and CO₂ removal were 14.2-39.0% · USD^-1 and 19.9-23.3% · USD^-1, respectively. Further, a sustainable recycling scheme is proposed for the purification of biogas slurry from anaerobic digestion process and biogas upgrading via microalgae-based technology.

Use of Biofuel Industry Wastes as Alternative Nutrient Sources for DHA-Yielding Schizochytrium limacinum Production

The simultaneous use of crude glycerol and effluent from anaerobic digestate, both wastes derived from the biofuel industry, were tested in the frame of circular economy concept, as potential low-cost nutrient sources for the cultivation of rich in docosahexaenoic acid (DHA) oil microalgae strain Schizochytrium limacinum SR21. Initially, the optimal carbon and nitrogen concentration levels for high S. limacinum biomass and lipids production were determined, in a culture media containing conventional, high cost, organic nitrogen sources (yeast extract and peptone), micronutrients and crude glycerol at varying concentrations. Then, the effect of a culture media composed of crude glycerol (as carbon source) and effluent digestate at varying proportions on biomass productivity, lipid accumulation, proximate composition, carbon assimilation and fatty acid content were determined. It was shown that the biomass and total lipid content increased considerably with varying effluent concentrations reaching 49.2 g L−1 at 48% (v/v) of effluent concentration, while the lipid yield at the same effluent concentration reached 10.15 g L−1, compared to 17.0 g L−1 dry biomass and 10.2 g L−1 lipid yield when yeast extract and peptone medium with micronutrients was used. Compared to the control treatment, the above production was obtained with 48% less inorganic salts, which are needed for the preparation of the artificial sea water. It was shown that Schizochytrium limacinum SR21 was able to remediate 40% of the total organic carbon content of the biofuel wastes, while DHA productivity remained at low levels with saturated fatty acids comprising the main fraction of total fatty acid content. The results of the present study suggest that the simultaneous use of two waste streams from the biofuel industry can serve as potential nutrient sources for the growth of Schizochytrium limacinum SR21, replacing the high cost organic nutrients and up to one half the required artificial sea water salts, but upregulation of DHA productivity through optimization of the abiotic environment is necessary for industrial application, including aqua feed production.

Waste Management in Dairy Cattle Farms in Aydın Region. Potential of Energy Application

In this paper, the dairy cattle waste management systems on farms in Aydın region in Turkey were investigated. Number of farms and livestock herd size, type of barn, type of machinery and farm labour force were studied. The collection, management and storage systems of manure produced in dairy cattle farms were taken into consideration. Additionally, biogas amount, which is produced from animal waste, was calculated for all districts of Aydın by using the number of livestock animals and various criteria such as the rate of dry matter. Results show that the typical and representative farm in the Aydın region is facility with a total head over 100 heads. 89.6% of the farms have heads in the range of 100 to 200. The amount of biogas that can be produced from all manure collected in Aydın region in the biogas plants is approximately 160,438 m3/day (based on 0.5 m3/day biogas per cattle), which would produce around 100 GWh/year that can be used for own needs of farms owners.

Evaluation of filamentous heterocystous cyanobacteria for integrated pig-farm biogas slurry treatment and bioenergy production

The study evaluates 36 filamentous heterocystous cyanobacteria for the treatment of biogas slurry from pig farm and the accumulation of biomass for bioenergy production. The results showed that only the strains B, J, and L were able to adapt to a 10% biogas slurry. The removal rates of ammonia nitrogen, total nitrogen, and total phosphorus for strains J and L were 92.46%-97.97%, 73.79%-79.90%, and 97.14%-98.46%, respectively, higher than that of strain B. Strain J had the highest biomass productivity and lipid productivity. Based on the biodiesel prediction results, it was concluded that strains J and L are more suitable for biodiesel production. The estimation of theoretical methane potential suggests that the algal biomass of strain J also have the desirable possibility of biogas generation. In summary, algal strain J (Nostoc sp.) offers great potential for biogas slurry treatment and for the production of bioenergy.

Catalytic Reforming: A Potentially Promising Method for Treating and Utilizing Wastewater from Biogas Plants

This study investigated catalytic reforming, which is a thermochemical process, as a pioneering method to treat biogas slurry (wastewater from biogas plants) and generate hydrogen. Experimental validation for treating biogas slurries from digested cattle manure, fish intestine, and wheat straw was performed on Ni/α-Al₂O₃ catalyst. The results showed that the total organic carbon, total nitrogen, and PO₄^3- ion contents in biogas slurry could be reduced by 98.69, 98.01, and 99.32%, respectively. The highest hydrogen yield was obtained in the treatment of biogas slurry from digested cattle manure at 750 °C, in which the hydrogen yield and hydrogen concentration were 13.85 L_hydrogen/L_BS and 79.77 vol %, respectively. Changes in the crystalline phase and structure of the catalyst were observed during catalytic reforming of biogas slurry. Active metal oxidization and carbon deposition were likely to be important factors affecting catalytic stability. The mass flow evaluation verified the hydrogen generation potential by the catalytic reforming of biogas slurry, which was close to the methane generation capability of the upstream biogas plant. However, additional effort is required to address the high energy consumption of this method. These findings provide fundamental knowledge about the potential of applying thermochemical techniques to treat and utilize high total organic carbon-containing wastewaters.

Effect of organic carbon and nutrient supplementation on the digestate-grown microalga, Parachlorella kessleri

Digested effluents are usually deprived of the appropriate levels of organic carbon or macro- and micro-nutrients to effectively sustain microalgal growth. In this regard, Parachlorella kessleri was cultivated in an agro-waste digestate supplemented with different glucose concentrations, magnesium and trace metals and alternatively with cheese whey (CW), with view to enriching digestate with organic and inorganic constituents and decreasing freshwater demand. Between the conditions tested, CW addition resulted in the highest biomass concentration, 2.68 g L^-1 within 18 days of cultivation. Chlorophyll content significantly decreased under 5 g L^-1 glucose addition, in contrast to MgSO₄ co-addition and CW supplementation. The latter also induced high photosynthetic activity and better-preserved vitality of the photosynthetic apparatus, compared to sole glucose addition. Concerning lipid accumulation, in the presence of high glucose concentration, % of total fatty acids decreased, and the saturated fraction increased over polyunsaturated fatty acids (PUFAs).

Investigations on pyrolysis of microalgae Diplosphaera sp. MM1 by TG-FTIR and Py-GC/MS: Products and kinetics

In this work, pyrolysis characteristics and kinetics of microalgae Diplosphaera sp. MM1 cultivated in different mediums were investigated by TG-FTIR and Py-GC/MS. Harvested MM1s biomass varied with the changing in proximate and ultimate analyses presented different weight loss behaviors. The weight loss of MM1s cultivated in dairy and winery wastewater in main pyrolysis region was ~48.4 wt% and ~52.9 wt%, respectively, and both showed secondary weight loss after 570 °C. However, MM1 harvested from BG-11 medium exhibited maximum weight loss of ~63.5 wt% and no secondary weight loss. Further, the activation energies of MM1s harvested from dairy and winery wastewater (176.3 kJ/mol and 130.4 kJ/mol, respectively) were lower than that of BG-11medium (189.4 kJ/mol). The best mechanism function for MM1s pyrolysis was third-order f(α) = (1-α)³. Py-GC/MS results of MM1 cultivated in winery wastewater showed highest contents of C4-C10 and C11-C21 that characterized the carbon level of gasoline and diesel, respectively, which are the major components of bio-oils.

Influence of irrigation with microalgae-treated biogas slurry on agronomic trait, nutritional quality, oxidation resistance, and nitrate and heavy metal residues in Chinese cabbage

Biogas slurry (BS) is a main byproduct of biogas production that is commonly used for agricultural irrigation because of its abundant nutrients and microelements. However, direct application of BS may cause quality decline and nitrate and heavy metal accumulation in crops. To address this issue, a microalgae culture experiment and an irrigation experiment were performed to evaluate the removal efficiencies of nutrients and heavy metals from diluted BS by microalgae Scenedesmus sp. and to investigate the effects of irrigation with microalgae-treated BS (MBS-25, MBS-50, MBS-75, and MBS-100) on nutritional quality, oxidation resistance, and nitrate and heavy metal residues in Chinese cabbage. After 8 days of continuous culture, a ratio of 1/1 for BS/tap water mixture (BS-50) was the optimal proportion for microalgal growth (3.73 g dry cell L^-1) and efficient removal of total nitrogen (86.1%), total phosphorus (94.3%), COD (87.5%), Cr (50%), Pb (60.7%), and Cd (59.7%). The pH in MBS-50 medium recovered to the highest level in a shorter period of time and accelerated the gas stripping of ammonia nitrogen and the formation of insoluble phosphate and metals, which partly contributed to the high removal efficiencies. MBS irrigation significantly promoted crop growth; improved nutritional quality, edible taste, and oxidation resistance; and reduced nitrate and heavy metal residues in Chinese cabbage at a large scale. Therefore, microalgae culture was beneficial to reduce negative impacts of BS irrigation in crop growth and agricultural product safety. This study may provide a theoretical basis for the safe utilization of BS waste in agricultural irrigation.

Photorespiration in an outdoor alkaline open-photobioreactor used for biogas upgrading

The rates of oxygenic and carbon fixation photosynthetic processes of a microalgae consortium were simultaneously evaluated under steady-state performance in an bench scale alkaline open-system exposed to outdoor conditions in Mexico City. A synthetic methane-free gaseous stream (SMGS) similar to biogas was used as inorganic carbon source and model of biogas upgrading. The microalgae CO₂ fixation rates were calculated through a novel methodology based on an inorganic carbon mass balance under continuous scrubbing of a SMGS similar to biogas, where the influence of pH and temperature time-depended oscillations were successfully incorporated into the mass balances. The oxygenic activity and carbon fixation occurred at different non-stoichiometric rates during the diurnal phase, in average carbon fixation predominated over oxygen production (photosynthesis quotient PQ≈ 0.5 mol O₂ mol^-1 CO₂) indicating photorespiration occurrence mainly under dissolved oxygen concentrations higher than 10 mg L^-1. The oxygen and inorganic carbon mass balances demonstrated that photorespiration and endogenous respiration were responsible for losing up to 66% and 7% respectively of the biomass grew at diurnal periods under optimal conditions. In favoring photorespiration conditions, the microalgae biomass productivity (CO₂ effectively captured) can be severely decreased. A kinetic mathematical model as a function of temperature and irradiance of the oxygenic photosynthetic activity indicated the optimal operation zone for this outdoor alkaline open-photobioreactor, where irradiance was found being the most influential parameter.

Non-airtight fermentation of sugar beet pulp with anaerobically digested dairy manure to provide acid-rich hydrolysate for mixotrophic microalgae cultivation

Non-airtight fermentation of lignocellulosic agricultural residues with animal wastes is an emerging pretreatment method to produce acid-rich substrates in two-phase anaerobic digestion. Acid-rich hydrolysate could be an excellent feedstock for cultivating microalgae, therefore, the feasibility of a two-step process combining non-airtight fermentation of sugar beet pulp with anaerobically digested dairy manure and mixotrophic microalgae species Chlorella cultivation in the hydrolysate was explored in this study. The hydrolysis and acidification process of 8-day non-airtight fermentation produced up to 8.1 g/L volatile fatty acids under mesophilic condition. Microalgal growths in diluted hydrolysates were compared with that in diluted digested dairy manure (DDM) as a control using experimental data and fitted logistic models. Chlorella grown in the 10-fold diluted DDM showed an exponential decay, while Chlorella cultured in the 3-fold diluted hydrolysate demonstrated the best performance in terms of biomass density, which reached 2.17 g/L within a short period of time.

Algal-Bacterial Symbiosis System Treating High-Load Printing and Dyeing Wastewater in Continuous-Flow Reactors under Natural Light

This study investigated the symbiotic structure relationship between mixed algae andactivated sludge while treating high-load printing and dyeing wastewater under natural light. Theeffects of hydraulic retention time (HRT) (12 h, 16 h and 20 h) and aeration rate (0.1–0.15, 0.4–0.5and 0.7–0.8 L/min) on algal–bacterial symbiosis (ABS) and conventional activated sludge (CAS)systems. Experimental results showed that the ABS system exhibited the best removal performancefor chemical oxygen demand (COD), ammonia nitrogen (NH4+-N) and total phosphorus (TP),which was increased by 12.5%, 23.1% and 10.5%, respectively, and reduced colour 80 timescompared with the printing and dyeing wastewater treatment plant. Algae growth could bepromoted under lower dissolved oxygen (DO), and the addition of algae could provide more DO tothe ABS system. The particle size distribution of sludge in the ABS system was stable, whichguaranteed a stable treatment effect. In addition, the COD and colour could be further degradedunder the conditions of no external carbon source and longer HRT. It is expected that the presentstudy will provide a foundation for the practical application of the ABS system, and new insightsfor the treatment of printing and dyeing wastewater.

Using magnetic materials to harvest microalgal biomass: evaluation of harvesting and detachment efficiency

Using naked iron oxide (Fe₃O₄) and yttrium iron oxide (Y₃Fe₅O₁₂) nanoparticles as flocculants, the harvesting efficiency of Chlorella vulgaris biomass was investigated. The harvesting process includes two steps, which are the separation of microalgae from the culture solution with the magnetic nanoparticles and then the separation of the algae from the magnetic nanoparticles. The optimal dosages and pH values for the magnetic harvesting of microalgal biomass were determined. Results showed that Y₃Fe₅O₁₂ nanoparticles were more efficient in microalgal biomass harvesting than Fe₃O₄ nanoparticles. In an effort to achieve more than 90% of harvesting efficiency, optimal dosages for Fe₃O₄ and Y₃Fe₅O₁₂ to harvest microalgal biomass were 10 and 2.5 g/L, while the appropriate pH values were 6.2 and 7.3, respectively. The harvesting efficiency of Fe₃O₄ and Y₃Fe₅O₁₂ nanoparticles increased as the pH value decreased. The experimental results also showed that under a higher pH value Fe₃O₄ nanoparticles were much easier to be separated from the flocs than Y₃Fe₅O₁₂. 62.9% of Fe₃O₄ nanoparticles could be de-attached from the aggregates, when the floc pH value reached 12.3.

Photosystem I fluorescence as a physiological indicator of hydrogen production in Chlamydomonas reinhardtii

This study investigated the interrelations between hydrogen synthesis and Photosystem I electron transport rate in Chlamydomonas reinhardtii. The fluorescence of both photosystems (PS I and PS II) was monitored using a Dual Pulse Amplitude Modulated (PAM) Fluorometer. Hydrogen synthesis was induced by eliminating sulphur from the growth media (TAP-S). Multiple physiological parameters [rETR, Y (I), Y (II), NPQ, α, F_v/F_m and YI:YII] were recorded using the Dual PAM and correlated to hydrogen produced. There was a 66% increase in Photosystem I rETR_max during hydrogen production. A significant direct correlation existed between PS 1 rETR_max and hydrogen evolution values over the ten-day period (r = 0.895, p < 0.01) indicating that PS I can be considered as a driver of H₂ production. Significant correlations between rETR_max of PS I and H₂ evolution suggest a novel physiological indicator to monitor H₂ production during the three critical phases identified in this study.

Performance of a novel photobioreactor for nutrient removal from piggery biogas slurry: Operation parameters, microbial diversity and nutrient recovery potential

Photobioreactor is deemed to be one of limiting factors for the commercial application of wastewater treatment based on microalgae cultivation. In this study, a novel Flat-Plate Continuous Open Photobioreactor (FPCO-PBR) was developed to treat piggery biogas slurry. The operation parameters, microbial stability and nutrient recovery potential of FPCO-PBR were investigated. Results showed that the appropriate influent mode for FPCO-PBR was multi-point or spraying mode. The optimal hydraulic retention time and interval time for biomass harvesting of FPCO-PBR were both 2 d. Nitrogen and phosphorus recovery rate were 30 mg L^-1 d^-1 and 7 mg L^-1 d^-1 respectively under optimal operating parameters. Microbial diversity remained relatively stable in FPCO-PBR. Biomass production rate of FPCO-PBR was 0.47 g L^-1 d^-1 under optimal operating parameters. The revenue generated from biomass was estimated to be 15.06 $ kg^-1, which means that treating one ton of wastewater can generate $ 7.08 in revenue.

Enhanced biomass and lipid accumulation of mixotrophic microalgae by using low-strength ultrasonic stimulation

Ultrasonic treatment was applied to enhance the biomass and lipid accumulation of mixotrophic microalgae. The optimal microalgal ultrasonic power, ultrasonic frequency, ultrasonic interval and growth phase were 20 W, 20 Hz, 2 s and logarithmic phase, respectively. The maximum biomass concentration and lipid content reached 2.78 g L^-1 and 28.5%, which were 26.9% and 37% higher than those of the control group. Microscope analysis shows that ultrasonic exposure caused tiny cracks or holes on the surface of cell walls, but did not damage the integrity of algal cell structure. After ultrasonic stimulation, the permeability of membrane and the transport of nutrients were improved, and the utilization rate of substrate and pigment concentration increased 22.7% and 18.4%, respectively. However, excessive ultrasonic irradiation significantly inhibited the cell growth and lipid accumulation of microalgae. This study indicates the feasibility and efficiency of using low-strength ultrasound in promoting biomass and lipid production of microalgae.

Buoy-bead flotation harvesting of the microalgae Chlorella vulgaris using surface-layered polymeric microspheres: A novel approach

To improve microalgae harvesting efficiency and to reduce the addition of chemicals in the buoy-bead flotation process, a novel buoy-bead flotation approach has been developed for harvesting Chlorella vulgaris, using surface-layered polymeric microspheres (SLPMs). Next, the detachment of microalgae cell-SLPM aggregates and the reusability of SLPMs were investigated. The experimental results showed that a maximum harvesting efficiency of 98.43% was achieved at a SLPM dosage of 0.7 g/L and a pH of 9, and harvesting efficiency quickly decreased with increasing ionic strength. A detachment efficiency of 78.46% and a concentration factor of 19.56 were achieved at an ionic strength of 700 mM and a mixing speed of 3000 rpm without changing the pH. Reused SLPMs can still reach an efficiency of 72.13% after five cycles. The presented results show that this method can potentially be applied for large-scale microalgae harvesting.

Performance and mechanism of a novel algal-bacterial symbiosis system based on sequencing batch suspended biofilm reactor treating domestic wastewater

A novel algal-bacterial symbiosis system based on sequencing batch suspended biofilm reactor (A-SBSBR) was developed for simultaneously enhanced nitrogen (N) and phosphorus (P) removal from domestic wastewater. Results showed that the total N (TN) and P (TP) removal efficiencies in A-SBSBR increased to 69.91% and 94.78%, respectively. The mechanism analysis indicated that TN removal mainly occurred at non-aeration stage, and TP removal happened during the whole cycle in A-SBSBR. Compared to control SBSBR, TN removal by denitrification and anabolism and TP removal by anabolism in A-SBSBR increased by 12.70%, 7.64% and 50.13%, respectively. The Chlorophyll a accumulation in biofilm increased to 4.80 ± 0.08 mg/g. Algae related to Chlorella and Scenedesmus and bacteria related to Flavobacterium, Micropruina and Comamonadaceae were enriched in A-SBSBR and responsible for the enhanced nutrients removal effect. This study may provide a new solution to achieve nutrients removal enhancement from wastewater.

High-efficiency nutrients reclamation from landfill leachate by microalgae Chlorella vulgaris in membrane photobioreactor for bio-lipid production

Using microalgae to treat landfill leachate is a promising approach due to the effective nutrients reclamation ability and additional profit of bio-lipid production. To offset the negative effect of landfill leachate on microalgae cells, a membrane photobioreactor (m-PBR) was adopted in the study, in which microalgae biomass concentration was improved from 0.66 in traditional photobioreactor (T-PBR) to 0.95 g/L. Nutrients reclamation efficiencies of leachate were analyzed according to elemental balance, and the results showed that nitrogen reclamation efficiency was generally lower than 50% while phosphorus reclamation efficiency was higher than 70% due to elemental availability. The nitrogen and phosphorus reclamation efficiencies in the m-PBR were much higher than that in the T-PBR. Besides, lipid produced from the m-PBR had a high cetane number of 60.96% and low linolenic acid content of 8.32%, which demonstrated good combustion properties of the microalgae-based lipid when using landfill leachate as nutrients source.

Efficient resource recycling from liquid digestate by microalgae-yeast mixed culture and the assessment of key gene transcription related to nitrogen assimilation in microalgae

To determine the feasibility of microalgae-yeast mixed culture using the liquid digestate of dairy wastewater (LDDW) for biofuels and single cell protein (SCP) production, the cell growth, nutrient removal and outputs evaluation of the mono and mixed culture of Chlorella vulgaris and Yarrowia lipolytica in LDDW were investigated by adding glycerol as carbon source. The results showed that the mixed culture could enhance the biological utilization efficiency of nitrogen and phosphorus, and obtain higher yield of biomass (1.62 g/L), lipid (0.31 g/L), protein (0.51 g/L), and higher heating value (34.06 KJ/L). Compared with the mono culture of C. vulgaris, a decline of the transcription level in nitrate reductase and glutamine synthetase II genes in C. vulgaris was observed in the mixed culture when ammonia was sufficient. The results suggest the possibility of using the mixed culture for the efficient treatment of LDDW and resources recycling.

Effect of combining adsorption-stripping treatment with acidification on the growth of Chlorella vulgaris and nutrient removal from swine wastewater

After swine wastewater (SW) was treated with adsorption-stripping stage, the concentration of NH₄⁺-N and Total phosphorus (TP) in SW significantly decreased from 598.04, 42.95 to 338.02, 8.36 mg L^-1, respectively. The concentration of heavy metals, especially Zn²⁺ (96.78%), decreased by the ion exchange of artificial zeolite (AZ). The acidification of SW could significantly improve the nutrient utilization efficiency and promote the growth rate of C. vulgaris due to the hydrolysis of macromolecular substances into smaller molecules usable for algae. By combining adsorption (Part I), stripping (Part II) and cultivation (Part III), the highest removal rates of NH₄⁺-N, TP, chemical oxygen demand (COD) and total organic carbon (TOC) from SW were 80.50, 96.90, 72.91, and 84.17%, respectively, and the OD₆₈₀ value was 1.129 (1.48 times of control) at pH 6.0. The combined system (Part I-III) can significantly enhance the removal efficiency of nutrient and biomass production by acidification.

A systematic comparison of two empirical gas-liquid mass transfer determination methodologies to characterize methane biodegradation in stirred tank bioreactors

This study aimed at systematically comparing the potential of two empirical methods for the estimation of the volumetric CH₄ mass transfer coefficient (k_la_CH4), namely gassing-out and oxygen transfer rate (OTR), to describe CH₄ biodegradation in a fermenter operated with a methanotrophic consortium at 400, 600 and 800 rpm. The k_la_CH4 estimated from the OTR methodology accurately predicted the CH₄ elimination capacity (EC) under CH₄ mass transfer limiting conditions regardless of the stirring rate (∼9% of average error between empirical and estimated ECs). Thus, empirical CH₄-ECs of 37.8 ± 5.8, 42.5 ± 5.4 and 62.3 ± 5.2 g CH₄ m^-3 h^-1vs predicted CH₄-ECs of 35.6 ± 2.2, 50.1 ± 2.3 and 59.6 ± 3.4 g CH₄ m^-3 h^-1 were recorded at 400, 600 and 800 rpm, respectively. The rapid Co²⁺-catalyzed reaction of O₂ with SO₃^-2 in the vicinity of the gas-liquid interphase during OTR determinations, mimicking microbial CH₄ uptake in the biotic experiments, was central to accurately describe the k_la_CH4.

Bio-Based Products from Microalgae Cultivated in Digestates

In recent years the increasing demand for food, energy, and valuable chemicals has necessitated research and development on renewable, novel, and sustainable sources. Microalgae represent a promising option to produce various products with environmentally friendly applications. However, several challenges must be overcome to reduce production cost. To this end, using effluents from biogas production units, called digestates, in cultivation systems can help to optimize bioprocesses, and several bioproducts including biofuels, biofertilizers, proteins and valuable chemicals can be obtained. Nevertheless, several parameters, including the productivity and quality of biomass and specific target products, downstream processes, and cost-effectiveness, must be improved. Further investigations will be necessary to take full advantage of the produced biomass and effectively upscale the process.