Biohydrogen and methane production via a two-step process using an acid pretreated native microalgae consortium

Role of microalgae in achieving sustainable development goals and circular economy

In 2015, the United Nations General Assembly (UNGA) set out 17 Sustainable Development Goals (SDGs) to be achieved by 2030. These goals highlight key objectives that must be addressed. Each target focuses on a unique perspective crucial to meeting these goals. Social, political, and economic issues are addressed to comprehensively review the main issues combating climate change and creating sustainable and environmentally friendly industries, jobs, and communities. Several mechanisms that involve judicious use of biological entities are among instruments that are being explored to achieve the targets of SDGs. Microalgae have an increasing interest in various sectors, including; renewable energy, food, environmental management, water purification, and the production of chemicals such as biofertilizers, cosmetics, and healthcare products. The significance of microalgae also arises from their tendency to consume CO2, which is the main greenhouse gas and the major contributor to the climate change. This work discusses the roles of microalgae in achieving the various SDGs. Moreover, this work elaborates on the contribution of microalgae to the circular economy. It was found that the microalgae contribute to all the 17th SDGs, where they directly contribute to 9th of the SDGs and indirectly contribute to the rest. The major contribution of the Microalgae is clear in SDG-6 "Clean water and sanitation", SDG-7 "Affordable and clean energy", and SDG-13 "Climate action". Furthermore, it was found that Microalgae have a significant contribution to the circular economy.

Sustainable production of biohydrogen from algae biomass: Critical review on pretreatment methods, mechanism and challenges

The production of chemicals and energy from sustainable biomass with an important objective decreasing carbon impressions has recently become one of the key areas of attention. Algae biomass have been recognized and researched as a potential renewable biomass of biohydrogen production attributed to their limited multiplying time, fast growing qualities and ability of lipid accumulation. This review additionally envelops various key perspectives such as composition and properties of algae biomass and pretreatment strategies such as physical, chemical and biological methods adopted for the algae biomass. This review is mainly focused on pretreatment strategies which have been developed to enhance biohydrogen production. The present review deals with methods and mechanism, enzymes involved and factors influencing on biohydrogen production which help to grasp various bottlenecks, challenges and constraints. Finally, the significant progressions and economical perspective on improving biohydrogen yield because of the expansion of co-substrates and the current trends are examined.

Thermophilic biogas production from microalgae-bacteria aggregates: biogas yield, community variation and energy balance

Biogas production through anaerobic mesophilic digestion is the most straightforward biofuel production route integrated into microalgae-bacteria wastewater treatment plants. Improvement of this biofuel route without adding pretreatment units is possible through the temperature increase. This paper presents a comprehensive evaluation of the transitory effect of different temperatures (35 °C and 55 °C) and hydraulic retention times (HRT) of 15 and 30 d on the long-term methane production using non-pretreated microalgae-bacteria aggregates as a feedstock. The thermophilic transition from mesophilic inoculum adapted to microalgae-bacteria aggregate increased 1.7-fold the methane production (0.41 m³CH₄ kgVS^-1) at HRT of 30 d. A substantial decrease in the microbial community's diversity present in the anaerobic reactor was observed when thermophilic conditions were applied, explaining the long adaptation period needed. The increase of the operative temperature condition promotes changes in the dominance pathway of methanogenesis from hydrogenotrophic to acetolactic. The energy balance assessment showed a positive net energy ratio when the digester was operated at an HRT of 30 d. A maximum net energy ratio of 1.5 was achieved at mesophilic temperature. This study demonstrated, based on experimental data, that microalgal digestion with an HRT of 30 d favors energy self-sustainability in microalgal wastewater treatment plants.

Bioenergy recovery from wastewater produced by hydrothermal processing biomass: Progress, challenges, and opportunities

Hydrothermal carbonization (HTC)/liquefaction (HTL)/gasification (HTG) are promising processes for biofuel production from biomass containing high moisture. However, wastewater, the aqueous phase (AP) byproduct from these hydrothermal processes, is inevitably produced in large amounts. The AP contains >20% of the biomass carbon, and the total organic carbon in AP is as high as 10-20 g/L. The treatment and utilization of AP are becoming a bottleneck for the industrialization of hydrothermal technologies. The major challenges are the presence of various inhibitory substances and the high complexity of AP. Bioenergy recovery from AP has attracted increasing interest. In the present review, the compositions and characteristics of AP are first presented. Then, the progress in recovering bioenergy from AP by recirculation as the reaction solvent, anaerobic digestion (AD), supercritical water gasification (SCWG), microbial fuel cell (MFC), microbial electrolysis cell (MEC), and microalgae cultivation is discussed. Recirculation of AP as reaction solvent is preferable for AP from biomass with relatively low moisture; AD, MFC/MEC, and microalgae cultivation are desirable for the treatment of AP produced from processing biomass with low lignin content at relatively low temperatures; SCWG is widely applicable but is energy-intensive. Finally, challenges and corresponding strategies are proposed to promote the development of AP valorization technologies. Comprehensive analysis of AP compositions, clarification of the mechanisms of valorization processes, valorization process integration detoxification of AP, polycultures and co-processing of AP with other waste, enhancement in pollutant removal, scaling-up performance, and the techno-economic analysis and life-cycle assessment of valorization systems are promising directions in future investigations.

Anaerobic degradation of protein-rich biomass in an UASB reactor: Organic loading rate effect on product output and microbial communities dynamics

Anaerobic degradation of enzymatically pretreated Chlorella vulgaris was aimed in an upflow anaerobic sludge blanket reactor (UASB) to evaluate the organic loading rate (OLR) effect on biomass valorization. Low OLRs resulted in high methane yields (171 mL CH₄/g CODin) at low hydraulic retention time (HRT of 6 days). Firmicutes (35-43%), Bacteroidetes (17-18%) and Euryarchaeota (11%) dominated at low OLRs, promoting methanogenic activity. On the contrary, the highest OLRs resulted in low methane yield (86 mL CH₄/gCODin) with a concomitant short-chain fatty acids (SCFAs) accumulation of 37% SCFAs-COD/CODin. The highest OLR decreased UASB reactor biodiversity, hampering Euryarchaeota population development (2.5%) and boosting Firmicutes (55%) and Proteobacteria (14%). These results demonstrated the suitability of UASB reactor configuration to reach high bioprocess efficiency for both, biogas and SCFAs production, with lower energetic and area requirements than those normally needed in continuous stirred tank reactors.

Role of indigenous bacteria in dark fermentation of organic substrates

Hydrogen production by dark fermentation of complex organic substrates, such as biowaste, can naturally take place with indigenous bacteria or by adding an external microbial inoculum issued from various natural environments. This study aims to determine whether indigenous bacteria associated with thermal pretreatment could impact dark fermentation performances. Biochemical hydrogen potential tests were carried out on seven organic substrates. Results showed a strong influence of the indigenous bacteria which are as effective as thermally pretreated exogenous bacteria to produce H₂ and metabolites. High abundance in Clostridiales and/or Enterobacteriales was associated with high H₂ yield. This study shows that no inoculum nor pretreatment are required to achieve satisfactory dark fermentation performances from organic waste.

Latest development in microalgae-biofuel production with nano-additives

BACKGROUND

Microalgae have been experimented as a potential feedstock for biofuel generation in current era owing to its' rich energy content, inflated growth rate, inexpensive culture approaches, the notable capacity of CO₂ fixation, and O₂ addition to the environment. Currently, research is ongoing towards the advancement of microalgal-biofuel technologies. The nano-additive application has been appeared as a prominent innovation to meet this phenomenon.

MAIN TEXT

The main objective of this study was to delineate the synergistic impact of microalgal biofuel integrated with nano-additive applications. Numerous nano-additives such as nano-fibres, nano-particles, nano-tubes, nano-sheets, nano-droplets, and other nano-structures' applications have been reviewed in this study to facilitate microalgae growth to biofuel utilization. The present paper was intended to comprehensively review the nano-particles preparing techniques for microalgae cultivation and harvesting, biofuel extraction, and application of microalgae-biofuel nano-particles blends. Prospects of solid nano-additives and nano-fluid applications in the future on microalgae production, microalgae biomass conversion to biofuels as well as enhancement of biofuel combustion for revolutionary advancement in biofuel technology have been demonstrated elaborately by this review. This study also highlighted the potential biofuels from microalgae, numerous technologies, and conversion processes. Along with that, the study recounted suitability of potential microalgae candidates with an integrated design generating value-added co-products besides biofuel production.

CONCLUSIONS

Nano-additive applications at different stages from microalgae culture to end-product utilization presented strong possibility in mercantile approach as well as positive impact on the environment along with valuable co-products generation into the near future.