Cultivation of Chlorella sp. with livestock waste compost for lipid production

Production of single cell oil by Lipomyces starkeyi from waste plant oil generated by the palm oil mill industry

Only a few reports available about the assimilation of hydrophobic or oil-based feedstock as carbon sources by Lipomyces starkeyi. In this study, the ability of L. starkeyi to efficiently utilize free fatty acids (FFAs) and real biomass like palm acid oil (PAO) as well as crude palm kernel oil (CPKO) for growth and lipid production was investigated. PAO, CPKO, and FFAs were evaluated as sole carbon sources or in the mixed medium containing glucose. L. starkeyi was able to grow on the medium supplemented with PAO and FFAs, which contained long-chain length FAs and accumulated lipids up to 35% (w/w) of its dry cell weight. The highest lipid content and lipid concentration were achieved at 50% (w/w) and 10.1 g/L, respectively, when L. starkeyi was cultured in nitrogen-limited mineral medium (-NMM) supplemented with PAO emulsion. Hydrophobic substrate like PAO could be served as promising carbon source for L. starkeyi.

Pilot-scale membrane-covered composting of food waste: Initial moisture, mature compost addition, aeration time and rate

The impact of different operational parameters on the composting efficiency and compost quality during pilot-scale membrane-covered composting (MCC) of food waste (FW) was evaluated. Four factors were assessed in an orthogonal experiment at three different levels: initial mixture moisture (IMM, 55 %, 60 %, and 65 %), aeration time (AT, 6, 9, and 12 h/d), aeration rate (AR, 0.2, 0.4, and 0.6 m3/h) and mature compost addition ratio (MC, 2 %, 4 %, and 6 %). Results indicated that 55 % IMM, 6 h/d AT, 0.4 m3/h AR, and 4 % MC addition ratio simultaneously provided the compost with the maximum cumulative temperature and the minimum moisture. It was shown that the IMM was the driving factor of this optimum composting process. On contrary, the optimal parameters for reducing carbon and nitrogen loss were 65 % IMM, 6 h/d AT, 0.4 m3/h AR, and 2 % MC addition ratio. The AR had the most influence on reducing carbon and nitrogen losses compared to all other factors. The optimal conditions for compost maturity were 55 % IMM, 9 h/d AT, 0.2 m3/h AR, and 6 % MC addition ratio. The primary element influencing the pH and electrical conductivity values was the AR, while the germination index was influenced by IMM. Protein was the main organic matter limiting the composting efficiency. The results of this study will provide guidance for the promotion and application of food waste MCC technology, and contribute to a better understanding of the mechanisms involved in MCC for organic solid waste treatment.

Eco-friendly cultivation of microalgae using a horizontal twin layer system for treatment of real solid waste leachate

Solid waste leachate (SWL) requires dilution with water to offset the negative effects of high nutrient concentration and organic compounds for its microalgae-based treatment. Among attached cultivation systems, twin layer is a technology in which limited information is available on treatment of high strength wastewater using microalgae. Moreover, widespread application of twin layer technology is limited due to cost of substrate and source layer used. In the present study, potential of Scenedesmus sp. for the treatment of SWL was assessed on horizontal twin layer system (HTLS). Novel and cost-effective substrate layers were tested as attachment material. Wetland treated municipal wastewater (WMW) was used to prepare SWL dilutions viz, 5%, 10%, 15%, 20% and 25% SWL. Recycled printing paper showed maximum biomass productivity of 5.19 g m-2 d-1. Among all the SWL dilutions, Scenedesmus sp. achieved maximum growth of 103.05 g m-2 in 5% SWL which was 16% higher than WMW alone. The maximum removal rate of NH4+ -N, TKN, and PO43- P was obtained in 20% SWL which was 1371, 1588 and 153 mg m-2 d-1 respectively. Varying concentrations of nutrients in different SWL dilutions significantly affected lipid biosynthesis, with enhanced productivity of 2.28 g m-2 d-1 achieved in 5% SWL compared to 0.97 g m-2 d-1 in 20% SWL. Hence, it can be concluded that 5% SWL dilution was good for biomass and lipid production, while the highest nutrient removal rates were obtained at 20% SWL mainly attributed to biotic and abiotic processes. Based on these results HTLS can be a promising technology for pilot scale to explore industrialized application of wastewater treatment and algal production.

Large-scale production of myco-fabricated ZnO/MnO nanocomposite using endophytic Colonstachys rosea with its antimicrobial efficacy against human pathogens

In this study, a ZnO/MnO nanocomposite was myco-fabricated using the isolated endophytic Clonostachys rosea strain EG99 as the nano-factory. The extract of strain EG99, a reducing/capping agent, was successfully titrated with equal quantities of Zn(NO3)2·6H2O and Mn(NO3)2·6H2O (precursors) in a single step to fabricate the rod-shaped ZnO/MnO nanocomposite of size 6.22 nm. The ZnO/MnO nanocomposite was myco-fabricated in 20 min, and the results were validated at 350 and 400 nm using UV-Vis spectroscopy. In a 7-L bioreactor, an industrial biotechnological approach was used to scale up the biomass of this strain, EG99, and the yield of the myco-fabricated ZnO/MnO nanocomposite. A controlled fed-batch fermentation system with a specific nitrogen/carbon ratio and an identical feeding schedule was used in this production process. Higher yields were obtained by adopting a controlled fed-batch fermentation approach in a 7-L bioreactor with a regular feeding schedule using a nitrogen/carbon ratio of 1:200. Overall, the fed-batch produced 89.2 g/l of biomass at its maximum, 2.44 times more than the batch's 36.51 g/l output. Furthermore, the fed-batch's maximum ZnO/MnO nanocomposite yield was 79.81 g/l, a noteworthy 14.5-fold increase over the batch's yield of 5.52 g/l. Finally, we designed an innovative approach to manage the growth of the endophytic strain EG99 using a controlled fed-batch fermentation mode, supporting the rapid, cheap and eco-friendly myco-fabrication of ZnO/MnO nanocomposite. At a dose of 210 µg/ml, the tested myco-fabricated ZnO/MnO nanocomposite exhibited the maximum antibacterial activity against Staphylococcus aureus (98.31 ± 0.8%), Escherichia coli (96.70 ± 3.29%), and Candida albicans (95.72 ± 0.95%). At the same dose, Staphylococcus aureus biofilm was eradicated in 48 h; however, Escherichia coli and Candida albicans biofilms needed 72 and 96 h, respectively. Our myco-fabricated ZnO/MnO nanocomposite showed strong and highly selective antagonistic effects against a variety of multidrug-resistant human pathogens. Therefore, in upcoming generations of antibiotics, it might be employed as a nano-antibiotic.

Valorization of environmental-burden waste towards microalgal metabolites production

The present study develops a novel concept of using waste media as an algal nutrient resource compared to the usual growth media with the aid of growth kinetics study and metabolite production abilities. Food- and agri-compost wastes are compact structures with elemental compounds for microbial media. As a part of the study, environ-burden wastes (3:1) as a food source for photosynthetic algae as a substitute for the costly nutrient media were proposed. The environment-burden waste was also envisaged for macromolecule production, i.e., 99200 μg/ml lipid, 112.5 μg/ml protein, and 8.75 μg/ml carbohydrate with different dilutions of agri-waste, bold basal media (BBM), and Food waste, respectively. The fabricated growth kinetics and dynamics showcased the unstructured models of different photosynthetic algal growth phases and the depiction of productivity and kinetic parameters. The theoretical maximum biomass concentration (Xp) was found to be more (0.871) with diluted agricompost media than the usual BBM (0.697). The X_Lim values were found to be 0.362, 0.323 and 0.209 for BBM, diluted agri-compost media and diluted food waste media, respectively. Overall, the study proposes a cleaner approach of utilizing the wastes as growth media through a circular economy approach which eventually reduces the growth media cost with integrated macromolecule production capabilities.

Nutrient removal and lipid production by the co-cultivation of Chlorella vulgaris and Scenedesmus dimorphus in landfill leachate diluted with recycled harvesting water

Applying microalgae for landfill leachate (LL) treatment is promising. However, LL usually needs to be diluted with much fresh water, aggravating water shortage. In this study, mono- and co-culturing microalgae (Chlorella vulgaris and Scenedesmus dimorphus) were used to treat LL diluted with recycled harvesting water, to investigate nutrient removal and lipid production. The results showed that microalgae in co-culture treatment had more biomass and stronger superoxide dismutase activity, which might be related to humic acids contained in recycled harvesting water, according to dissolved organic matters (DOMs) analysis. In addition, the lipid content and yield of co-cultured microalgae reached 27.60 % and 66.87 mg·L^-1, respectively, higher than those of mono-culture, proving the potential of co-culture for the improvement of lipid production. This study provided a freshwater-saving dilution method for LL treatment with recycled harvesting water as well as a strategy for the increase of biomass and lipid accumulation by microalgae co-cultivation.

Biotechnological Approaches for Biomass and Lipid Production Using Microalgae Chlorella and Its Future Perspectives

Heavy reliance on fossil fuels has been associated with increased climate disasters. As an alternative, microalgae have been proposed as an effective agent for biomass production. Several advantages of microalgae include faster growth, usage of non-arable land, recovery of nutrients from wastewater, efficient CO₂ capture, and high amount of biomolecules that are valuable for humans. Microalgae Chlorella spp. are a large group of eukaryotic, photosynthetic, unicellular microorganisms with high adaptability to environmental variations. Over the past decades, Chlorella has been used for the large-scale production of biomass. In addition, Chlorella has been actively used in various food industries for improving human health because of its antioxidant, antidiabetic, and immunomodulatory functions. However, the major restrictions in microalgal biofuel technology are the cost-consuming cultivation, processing, and lipid extraction processes. Therefore, various trials have been performed to enhance the biomass productivity and the lipid contents of Chlorella cells. This study provides a comprehensive review of lipid enhancement strategies mainly published in the last five years and aimed at regulating carbon sources, nutrients, stresses, and expression of exogenous genes to improve biomass production and lipid synthesis.

Response of fungi-microalgae pellets to copper regulation in the removal of sulfonamides and release of dissolved organic matters

Both sulfonamides (SAs) and copper (Cu(II)) were frequently detected together in swine wastewater. In this study, the regulation of Cu(II) on SAs adsorption and release of dissolved organic matters (DOMs) by fungi-microalgae pellets (FM-pellets) were investigated. Aspergillus oryzae pellets were prepared for combination with Chlorella vulgaris and the optimal conditions were at agitation speed of 130 rpm, fungi to microalgae ratio of 10:1 and the combined time of 3 h with the highest combination efficiency of 98.65%. The results showed that adsorption was the main mechanism for SAs removal. FM-pellets exhibited a high SAs adsorption potential within 6 h, and the adsorption capacity of sulfamethazine (SMZ), sulfamonomethoxine (SMM) and sulfamethoxazole (SMX) was 1.07, 0.94 and 1.67 mg/g, respectively. Furthermore, the removal of SMX, SMZ and SMM was greatly promoted from 62.31% to 85.21%, 58.71-67.91% and 64.17-80.31%, respectively, under the presence of 2 mg/L Cu(II) through ion exchange and adsorption bridging. DOMs were analyzed by the parallel factor (PARAFAC) to demonstrate the response mechanism of FM-pellets to Cu(II). Protein-like substances and NADH in DOMs released by FM-pellets formed complexes with Cu(II) to alleviate the damage on the organism. These findings provide new insights into the mechanism and response of Cu(II) in the removal of SAs by FM-pellets.

Assessment Impacts of Ozone on Salmonella Typhimurium and Escherichia coli O157:H7 in Liquid Dairy Waste

Liquid dairy manure, which is produced in enormous quantities in flush dairy manure management systems, is commonly used as an alternative to chemical fertilizers. It provides nutrient benefits to crops and soils. While dairy waste is a well-accepted and widely used fertilizer, the presence of indicator organisms and human pathogens in manure may lead to pathogen contamination in crops and soils. This study is focused on the examination of ozone gas-based sterilization. In the past, ozone (O3) has been used for sanitizing various foods and solid surfaces, but the potential of O3 for eliminating human pathogens in liquid dairy waste is not studied yet. Pathogens such as Salmonella Typhimurium and Escherichia coli O157:H7 are reported to be present in liquid dairy manure, and this research evaluated the effects of various levels of ozone on the survival of these two pathogens. We designed a continuous type O3 treatment system that has four major components: (1) ozone generator using oxygen; (2) ozone concentration control by mixing with pure air; (3) continuous monitoring of ozone concentrations; and (4) ozone experiment chambers. Various levels of ozone (43.26, 87.40, and 132.46 mg·L−1) were produced in the ozone system, and subsequently, ozone was diffused through liquid manure. Liquid manure was exposed to ozone for multiple durations (30, 60, and 120 min). To determine the effectiveness of O3 in eliminating pathogens, time-series samples were collected and analyzed for determining the levels of S. typhimurium and E. coli O157:H7. Preliminary results showed that ozone concentrations of 132.46 mg/L, and exposure time of 120 min resulted in the reduced levels of E. coli and Salmonella. Low levels of ozone and limited exposure time were found to be less effective in pathogen removal potentially due to high solid contents. Additional studies carrying out experiments to evaluate the impacts of solids in combination with ozone concentrations will provide further insights into developing full-scale ozone-based treatment systems.

Performance evaluation of rhamnolipids addition for the biodegradation and bioutilization of petroleum pollutants during the composting of organic wastes with waste heavy oil

Environmental pollution caused by petroleum hydrocarbons is being paid more and more attention worldwide. Surfactants are able to improve the solubility of petroleum hydrocarbons, but their effects on petroleum hydrocarbon degradation in composting systems are still unclear. In this study, the effects on microbial community succession were investigated by adding petroleum hydrocarbons and rhamnolipids during composting of organic wastes. The results showed that the compost and the addition of rhamnolipids could effectively reduce the petroleum hydrocarbon content with an efficiency of 73.52%, compared to 53.81% for the treatment without addition. Network analyses and Structural Equation Model suggested that there were multiple potential petroleum degraders microbes that might be regulated by nitrogen. The findings in this study can also provide an implication for the treatment of petroleum hydrocarbon pollutants from oil-polluted soil, and the technology can be potentially applied on an industrial scale in practice.

•

Effects of rhamnolipids on the removal of petroleum hydrocarbons were investigated

•

The relationship between PDM, APDM, and environmental factors was revealed

•

There was a significant correlation between nitrogen and PDM and APDM

•

Rhamnolipids are bio-resources for effectively removing petroleum hydrocarbons

Microalgae cultivation using unsterilized cattle farm wastewater filtered through corn stover

The aim of this study was to investigate the cultivation of Chlorella sp. (FACHB-8) and Kirchneriella obesa (FACHB-2104) using the unsterilized cattle farm wastewater (CFW) filtered through corn stover. Corn stover filtration effectively reduced the turbidity and suspended solids of CFW and improved the adaptability of microalgae to CFW. The yields of microalgae supplemented with filtered CFW were significantly higher than those of microalgae supplemented with unfiltered CFW-by 14%-57% (FACHB-8) and 12%-78% (FACHB-2104) and comparable to those with pure blue-green algae medium (BG11). The growth kinetics of microalgae conformed to the DoseResp model. A 3:6 ratio of filtered CFW to BG11 and an 8000 lx light intensity were optimal for achieving high microalgae production. Under optimum conditions, the maximal yields of FACHB-8 and FACHB-2104 were 1.26 and 1.22 g/L, respectively, and the removal efficiencies of nitrogen, phosphorus, and chemical oxygen demand exceeded 95%, 99%, and 82%, respectively.

Microalgae-based livestock wastewater treatment (MbWT) as a circular bioeconomy approach: Enhancement of biomass productivity, pollutant removal and high-value compound production

The intensive livestock activities that are carried out worldwide to feed the growing human population have led to significant environmental problems, such as soil degradation, surface and groundwater pollution. Livestock wastewater (LW) contains high loads of organic matter, nitrogen (N) and phosphorus (P). These compounds can promote cultural eutrophication of water bodies and pose environmental and human hazards. Therefore, humanity faces an enormous challenge to adequately treat LW and avoid the overexploitation of natural resources. This can be accomplished through circular bioeconomy approaches, which aim to achieve sustainable production using biological resources, such as LW, as feedstock. Circular bioeconomy uses innovative processes to produce biomaterials and bioenergy, while lowering the consumption of virgin resources. Microalgae-based wastewater treatment (MbWT) has recently received special attention due to its low energy demand, the robust capacity of microalgae to grow under different environmental conditions and the possibility to recover and transform wastewater nutrients into highly valuable bioactive compounds. Some of the high-value products that may be obtained through MbWT are biomass and pigments for human food and animal feed, nutraceuticals, biofuels, polyunsaturated fatty acids, carotenoids, phycobiliproteins and fertilizers. This article reviews recent advances in MbWT of LW (including swine, cattle and poultry wastewater). Additionally, the most significant factors affecting nutrient removal and biomass productivity in MbWT are addressed, including: (1) microbiological aspects, such as the microalgae strain used for MbWT and the interactions between microbial populations; (2) physical parameters, such as temperature, light intensity and photoperiods; and (3) chemical parameters, such as the C/N ratio, pH and the presence of inhibitory compounds. Finally, different strategies to enhance nutrient removal and biomass productivity, such as acclimation, UV mutagenesis and multiple microalgae culture stages (including monocultures and multicultures) are discussed.

Sustainable biodiesel production from microalgae Graesiella emersonii through valorization of garden wastes-based vermicompost

Biodiesel production from microalgae has gained significant interest recently due to the growing energy demand and non-renewable nature of petroleum. However, high cost of production and environmental health related issues like excess use of inorganic fertilizers, eutrophication are the major constraints in commercial-scale biodiesel production. Besides this, solid wastes (garden-based) management is also a global concern. In the present study, to overcome these limitations vermicompost extract was tested as nutrient source to enhance growth performance and lipid production from a freshwater microalga (Graesiella emersonii MN877773). Garden wastes were first converted into vermicompost manure and its extract (aerobic and anaerobically digested) was prepared. The efficacy of the extract was then tested in combination with BG11 medium. The mixotrophic cultivation of microalgae in anaerobically digested vermicompost extract at 50:50 combination with BG11 medium enhanced the cell biomass (0.64 g d. wt. L^-1) and lipid productivity (3.18 mg L^-1 day^-1) of microalgae by two times. Moreover, the combination also improved the saturated (methyl palmitate) and monounsaturated fatty acids (oleic acid) content in the test algae. The quality of biodiesel also complies with all the properties of biodiesel standard provided by India, the USA, and Europe except the cold filter plugging property. The combination was also found to improve the cell biomass (0.041 g L^-1) as compared to BG11 medium in mass-scale cultivation. Hence, the study proved that G. emersonii grown in media supplemented with garden waste-based vermicompost extract had significant potential for mass-scale biodiesel and bioproduct production.

Cultivation and Biorefinery of Microalgae (Chlorella sp.) for Producing Biofuels and Other Byproducts: A Review

Microalgae-based carbon dioxide (CO2) biofixation and biorefinery are the most efficient methods of biological CO2 reduction and reutilization. The diversification and high-value byproducts of microalgal biomass, known as microalgae-based biorefinery, are considered the most promising platforms for the sustainable development of energy and the environment, in addition to the improvement and integration of microalgal cultivation, scale-up, harvest, and extraction technologies. In this review, the factors influencing CO2 biofixation by microalgae, including microalgal strains, flue gas, wastewater, light, pH, temperature, and microalgae cultivation systems are summarized. Moreover, the biorefinery of Chlorella biomass for producing biofuels and its byproducts, such as fine chemicals, feed additives, and high-value products, are also discussed. The technical and economic assessments (TEAs) and life cycle assessments (LCAs) are introduced to evaluate the sustainability of microalgae CO2 fixation technology. This review provides detailed insights on the adjusted factors of microalgal cultivation to establish sustainable biological CO2 fixation technology, and the diversified applications of microalgal biomass in biorefinery. The economic and environmental sustainability, and the limitations and needs of microalgal CO2 fixation, are discussed. Finally, future research directions are provided for CO2 reduction by microalgae.

Microalgae Chlorella vulgaris and Scenedesmus dimorphus co-cultivation with landfill leachate for pollutant removal and lipid production

In this study, landfill leachate was pre-treated with NaClO, and then diluted to 5%, 10% and 15% for microalgae growth of Chlorella vulgaris and Scenedesmus dimorphus in the mono- and co-culture modes to investigate the nutrient removal and growth characteristics of microalgae. The results revealed that landfill leachate with the 10% dilution rate was conducive for microalgae growth and exhibited robust biomass growth and the highest nutrient removal efficiency. The co-culture biomass in 10% landfill leachate achieved 0.266 g/L within 10 days and demonstrated the improved nutrient utilisation efficiency of microalgae. In addition, the chemical oxygen demand, ammonia nitrogen, total nitrate and total phosphorus removal efficiencies accordingly reached 81.0%, 80.1%, 72.1% and 86.0% in 10% landfill leachate. Meanwhile, both the enzyme activity and fluorescence parameters proved that the cell activity of co-culture was higher than that of mono-culture.

Roadmap to sustainable carbon-neutral energy and environment: can we cross the barrier of biomass productivity?

The total number of inhabitants on the Earth is estimated to cross a record number of 9 × 10³ million by 2050 that present a unique challenge to provide energy and clean environment to every individual. The growth in population results in a change of land use, and greenhouse gas emission due to increased industrialization and transportation. Energy consumption affects the quality of the environment by adding carbon dioxide and other pollutants to the atmosphere. This leads to oceanic acidification and other environmental fluctuations due to global climate change. Concurrently, speedy utilization of known conventional fuel reservoirs causes a challenge to a sustainable supply of energy. Therefore, an alternate energy resource is required that can maintain the sustainability of energy and environment. Among different alternatives, energy production from high carbon dioxide capturing photosynthetic aquatic microbes is an emerging technology to clean environment and produce carbon-neutral energy from their hydrocarbon-rich biomass. However, economical challenges due to low biomass production still prevent the commercialization of bioenergy. In this work, we review the impact of fossil fuels burning, which is predominantly used to fulfill global energy demand, on the quality of the environment. We also assess the status of biofuel production and utilization and discuss its potential to clean the environment. The complications associated with biofuel manufacturing using photosynthetic microorganisms are discussed and directed evolution for targeted phenotypes and targeted delivery of nutrients are proposed as potential strategies to increase the biomass production.

Carbonate assisted lipid extraction and biodiesel production from wet microalgal biomass and recycling waste carbonate for CO2 supply in microalgae cultivation

High cost of microalgal biofuel is caused by all the steps in current technology, including cultivation, harvesting, lipid extraction, biofuel processing and wastewater and waste treatment. This study aims to systematically reduce these costs with one integrated process, in which carbonate is used for cell rupture, lipid extraction and biodiesel processing, and then recycled for CO₂ absorption and carbon supply for a new round of algae cultivation. To reach this goal, carbonate-heating treatment with N, N' - dibutylurea which can enhance cell disruption were used for cell-wall breaking of wet Neochloris oleoabundans (UTEX 1185) biomass. Lipid extraction was fulfilled with carbonate/ethanol aqueous two phase extraction method and residual carbonate with wastewater from bottom phase was recycled to absorb CO₂ to generate bicarbonate for algal cultivation with fresh medium. Taking into comprehensive consideration of cell disruption efficiency, partition coefficient, and lipid recovery, the condition of cell disruption and lipid extraction was set at 90 °C, 100 min reaction time, 1:7.5 DBU:H₂O (w/w) ratio, 1:3 Na₂CO₃:H₂O (w/w) ratio, and 9% (w/w_T) ethanol concentration. The results showed that carbonate-heating treatment of wet N. oleoabundans biomass resulted in up to 90.7% cell disruption efficiency. The lipid recovery rate in carbonate/ethanol system was up to 97.9%, and the final biodiesel production was 1.30 times of that with Soxhlet method. Utilization of the waste broth after CO₂ absorption with the content of 4% (v/v_T) in the medium for new batch of algae cultivation resulted in biomass concentration of 1.68 g/L. The corresponding total fatty acids production was 0.35 g/L, which was 1.63 fold of that with fresh medium. This study firstly proved the feasibility of using carbonate for lipid extraction and biodiesel production and recycle waste carbonate for carbon re-supply during algae cultivation.

Anaerobic digestate water for Chlorella pyrenoidosa cultivation and employed as co-substrate with cow dung and chicken manure for methane and hydrogen production: A closed loop approach

In rural India, unpleasant atmosphere, anthropogenic gas emission, air and soil pollution are caused due to disposal of livestock's wastes (cow dung and chicken waste) in open environment. This study provides zero emission concept for waste disposal and value addition of these wastes for renewable green energy production. In this study, biogas production was carried out with varying proportion of cow dung to chicken waste (1:0, 0:1, 1:1, 2:1, 1:2, 3:1 and 1:3) for duration of 40 days. Chlorella pyrenoidosa was cultivated from digestate water and used as co-substrate in digester in varying proportions (2:1:1, 2:1:2 and 2:1:3) to study its role on biogas distribution. The effect of pH, feedstock ratio, time and C/N ratio for biogas production were evaluated. The maximum methane and hydrogen yield was 68% (30th day) and 29% (10th day) for 2:1:2 ratio respectively. The slurry possessed nitrogen (1.7%), phosphate (0.8%) and potassium (0.4%) respectively.

Enhanced Arthrospira platensis Biomass Production Combined with Anaerobic Cattle Wastewater Bioremediation

Microalgae biomasses offer important benefits regarding macromolecules that serve as promising raw materials for sustainable production. In the present study, the microalgae Arthrospira platensis DHR 20 was cultivated in horizontal photobioreactors (HPBR), with and without temperature control, in batch mode (6 to 7 days), with anaerobically digested cattle wastewater (ACWW) as substrate. High dry biomass concentrations were observed (6.3-7.15 g L^-1). Volumetric protein, carbohydrate, and lipid productivities were 0.299, 0.135, and 0.108 g L^-1 day^-1, respectively. Promising lipid productivities per area were estimated between 22.257 and 39.446 L ha^-1 year^-1. High CO₂ bio-fixation rates were recorded (875.6-1051 mg L^-1 day^-1), indicating the relevant potential of the studied microalgae to mitigate atmospheric pollution. Carbon concentrations in biomass ranged between 41.8 and 43.6%. ACWW bioremediation was satisfactory, with BOD₅ and COD removal efficiencies of 72.2-82.6% and 63.3-73.6%. Maximum values of 100, 95.5, 92.4, 80, 98, and 94% were achieved concerning the removal of NH₄ ⁺, NO₃ ^-, P_t, SO₄ ^2-, Zn, and Cu, respectively. Total and thermotolerant coliform removals reached 99-99.7% and 99.7-99.9%. This microalgae-mediated process is, thus, promising for ACWW bioremediation and valuation, producing a microalgae biomass rich in macromolecules that can be used to obtain friendly bio-based products and bioenergy.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s12155-021-10258-4.

Phycoremediation of X-ray developer solution towards silver removal with concomitant lipid production

The present research is mainly focusing on the characterization of X-ray developer solution and its toxic tolerance studies with Desmodesmus armatus towards the phycoremediation studies for removal of pollutants, silver, and concomitant lipid production. The characterization results suggested the presence of 1.229 ± 0.004 g/l BOD, 27.29 ± 0.230 g/l COD with a silver content of 0.01791 ± 0.000 g/l. The tolerance and toxicity limits of with X-ray developer solution reveals the remarkable growth of microalgae in 3:1.dilution ratio of BBM in the X-ray developer solutions. The phycoremediation with 19 days period shown the noticeable results with a relative BOD (20.86%), COD (13.88%), with 57.10% corresponding total phosphorous removal. The phycoremediation also has proven better relative silver removal potential of 44.06% on the 19th day with concomitant 1.392% lipid production. Overall, the present study shows the potential phycoremediation strategy of hazardous X-ray developer solutions with possible concurrent lipid production through a sustainable approach.

The Prospects of Agricultural and Food Residue Hydrolysates for Sustainable Production of Algal Products

The growing demand of microalgal biomass for biofuels, nutraceuticals, cosmetics, animal feed, and other bioproducts has created a strong interest in developing low-cost sustainable cultivation media and methods. Agricultural and food residues represent low-cost abundant and renewable sources of organic carbon that can be valorized for the cultivation of microalgae, while converting them from an environmental liability to an industrial asset. Biochemical treatment of such residues results in the release of various sugars, primarily glucose, sucrose, fructose, arabinose, and xylose along with other nutrients, such as trace elements. These sugars and nutrients can be metabolized in the absence of light (heterotrophic) or the presence of light (mixotrophic) by a variety of microalgae species for biomass and bioproduct production. The present review provides an up-to-date critical assessment of the prospects of various types of agricultural and food residues to serve as algae feedstocks and the microalgae species that can be grown on such residues under a range of cultivation conditions. Utilization of these feedstocks can create potential industrial applications for sustainable production of microalgal biomass and bioproducts.

Assessment of gaseous ozone treatment on Salmonella Typhimurium and Escherichia coli O157:H7 reductions in poultry litter

Poultry litter is used as soil amendment or organic fertilizer. While poultry litter is enriched with organic matter suitable for land, the presence of pathogens such as Salmonella in poultry litter is a concern. To investigate the effect of gaseous ozone on pathogen reductions in poultry litter, this study conducted a series of experiments that involved understanding of Salmonella Typhimurium and Escherichia coli O157:H7 inactivation at various doses of Ozone (O₃) in wet and dry poultry litter conditions. Previously, ozone treatment has been shown to disinfect the surface of foods and plant materials including fruits, juices, and wastewater, however, additional research are needed to better understand the impacts of ozone on treatment of soil amendments. Sanitizing methods capable of eliminating pathogens of soil amendments are crucial to mitigate disease outbreaks related with litter/manure-based fertilizers. In this study, a bench scale continuous ozone treatment system was designed to produce O₃ gas, with a range O₃ concentrations (7.15-132.46 mg·L^-1), monitor ozone concentrations continuously, and control the ozone exposure time (15 to 90 mins) to understand the effectiveness of O₃ in eliminating S. Typhimurium and E. coli O157:H7 in poultry litter. Results showed that 7.15 mg·L^-1 did not reduce the counts of S. Typhimurium until exposure to O₃ for 90 min. The O₃ concentrations of 43.26 ~ 132.46 mg·L^-1 exposure reduced the bacterial counts. Furthermore, the moisture content of poultry litter was found to be an influencing factor for pathogen reduction. The pathogen reduction rates were reduced when the moisture content was increased. At higher moisture content, high concentrations of O₃ (132.46 mg·L^-1) were needed for pathogen reductions. The moisture content of 30% or lower was found to be more effective for controlling pathogen levels in poultry litter. Our study demonstrates that gaseous O₃ treatment could be used as an additional decontamination technique to ensure the certain degree of microbiological safety of poultry litter based soil amendment.

A comprehensive review on cultivation and harvesting of microalgae for biodiesel production: Environmental pollution control and future directions

Biodiesel is one of the best promising candidates in response to the energy crisis, since it has the capability to minimize most of the environmental problems. Microalgae, as the feedstock of third-generation biodiesel, are considered as one of the most sustainable resources. However, microalgae production for biodiesel feedstock on a large scale is still limited, because of the influences of lipid contents, biomass productivities, lipid extraction technologies, the water used in microalgae cultivation and processes of biomass harvesting. This paper firstly reviews the recent advances in microalgae cultivation and growth processes. Subsequently, current microalgae harvesting technologies are summarized and flocculation mechanisms are analyzed, while the characteristics that the ideal harvesting methods should have are summarized. This review also summarizes the environmental pollution control performances and the key challenges in future. The key suggestions and conclusions in the paper can offer a promising roadmap for the cost-effective biodiesel production.

Toxicity, Biodegradation, and Metabolic Fate of Organophosphorus Pesticide Trichlorfon on the Freshwater Algae Chlamydomonas reinhardtii

This study investigated the toxicity of trichlorfon (TCF) to the freshwater algae Chlamydomonas reinhardtii, as well as its biodegradation and metabolic fate. The growth of C. reinhardtii decreased with increasing TCF concentration, and the maximum inhibition ratio was 51.3% at 200 mg L^-1 TCF compared to the control. Analyses of pigment content, chlorophyll fluorescence, and antioxidant enzymes indicated that C. reinhardtii can produce resistance and acclimatize to the presence of TCF. The variations in pH during cultivation suggested that photosynthetic microalgae have innate advantages over bacteria and fungi in remediating TCF. A 100% biodegradation rate was achieved at a maximum concentration of 100 mg L^-1 TCF. Ten metabolites were identified by GC-MS, and the degradation pathways of TCF by the algae were proposed. This research demonstrated that C. reinhardtii is highly tolerant to and can efficiently degrade TCF. Thus, C. reinhardtii can be used to remove traces of TCF from natural water environments and to treat TCF-contaminated wastewater.

Influence of growth phase on the harvesting of Scenedesmus acuminatus using ultrafiltration

Cellular characteristics and algogenic organic matter (AOM) properties change with culture time. This study aims to understand the changes throughout the growth phase, and their effect on Scenedesmus acuminatus harvesting using ultrafiltration. The variations in cellular particle size distribution, cellular EPS content, and the biochemical composition and molecular weight of AOM were analyzed, followed by the membrane harvesting of the original S. acuminatus suspension, AOM-free cells and cell-free AOM. The results showed that the average flux for the original suspension increased with growth phase and reached an increase of 36.3% in the declining phase. AOM played a greater role than S. acuminatus cells in flux decline for all growth phases. Exponential-phase AOM contained a greater high-MW fraction and more carbohydrates, and the exponential cells were smaller cells and had a higher EPS content; these characteristics resulted in a reduced average flux.

Using magnetic materials to harvest microalgal biomass: evaluation of harvesting and detachment efficiency

Using naked iron oxide (Fe₃O₄) and yttrium iron oxide (Y₃Fe₅O₁₂) nanoparticles as flocculants, the harvesting efficiency of Chlorella vulgaris biomass was investigated. The harvesting process includes two steps, which are the separation of microalgae from the culture solution with the magnetic nanoparticles and then the separation of the algae from the magnetic nanoparticles. The optimal dosages and pH values for the magnetic harvesting of microalgal biomass were determined. Results showed that Y₃Fe₅O₁₂ nanoparticles were more efficient in microalgal biomass harvesting than Fe₃O₄ nanoparticles. In an effort to achieve more than 90% of harvesting efficiency, optimal dosages for Fe₃O₄ and Y₃Fe₅O₁₂ to harvest microalgal biomass were 10 and 2.5 g/L, while the appropriate pH values were 6.2 and 7.3, respectively. The harvesting efficiency of Fe₃O₄ and Y₃Fe₅O₁₂ nanoparticles increased as the pH value decreased. The experimental results also showed that under a higher pH value Fe₃O₄ nanoparticles were much easier to be separated from the flocs than Y₃Fe₅O₁₂. 62.9% of Fe₃O₄ nanoparticles could be de-attached from the aggregates, when the floc pH value reached 12.3.

Pretreated animal and human waste as a substantial nutrient source for cultivation of microalgae for biodiesel production

The use of human and animal wastes for fertilization of aquaculture ponds has been practiced for thousands of years. In the present work, we have used the excreta (human urine, poultry waste, cow dung, and urine) as a nutrient source for the cultivation of Chlorella singularis, Micractinium pusillum, and Chlorella sorokiniana strains of microalgae. Different solid wastes were treated with 60 mM H₂SO₄ for the extraction of nutrients. After treatment, the supernatant of different solid wastes and liquid waste were diluted 5, 10, 15, and 20% to be used as a media for the cultivation of microalgae. Chlorella sorokiniana was able to grow in all concentration of excreta media. The maximum growth rate 140 ± 3.1 mg/L/day and lipid production (45.5 ± 2.3 mg/L/day) was obtained in 20% poultry. Among the different excreta media used for cultivation of microalgae, poultry media displayed the best results and thus, should be used for large scale cultivation of microalgae.

Using Chlorella vulgaris to treat toxic excess sludge extract, and identification of its response mechanism by proteomics approach

Chlorella vulgaris was cultivated in varying proportions of toxic sludge extracts obtained from a sequencing batch reactor for treating synthetic wastewater containing chlorophenols. C. vulgaris could reduce the ecotoxicity from sludge extracts, and a positive correlation was noted between ecotoxicity removal and total organic carbon removal. In terms of cell density, the optimal proportion of sludge extracts required for the cultivation of C. vulgaris was lower than 50%. The correlation between protein content in per 10⁶ algae and inhibition extent of ecotoxicity of the 5 groups on the day of inoculation (0.9182, p < .05) indicated a positive relationship between algal protein secretion and ecotoxicity. According to the protein expression and differential protein expression analysis, we concluded that C. vulgaris produced proteins that involved in the stress response/redox system and energy metabolism/biosynthesis to respond to the toxic environment and some other proteins related to mixotrophic metabolism.

Operation of a vertical algal biofilm enhanced raceway pond for nutrient removal and microalgae-based byproducts production under different wastewater loadings

In this study, a vertical-algal-biofilm-enhanced raceway pond (VAB-enhanced raceway pond) was designed and assessed for wastewater treatment and algal biomass production under different nutrient loading rates. Results indicated that the maximum removal capacity of the system was accordingly 7.52, 6.76 and 0.11 g·m^-2·day^-1 for COD, TN and TP, under which the wastewater effluent concentration could be respectively reduced from 106.00, 92.71 and 1.48 mg/L to 43.5, 11.03 and 0.46 mg/L in continuous mode. Meanwhile, about 7.47-10.10 t·ha^-1·year^-1 of lipid, 14.85-23.01 t·ha^-1·year^-1 of protein and 10.69-14.20 t·ha^-1·year^-1 of carbohydrate could be produced from the algae by the system in large scale. The corresponding estimated stoichiometric-methane-potential and biodiesel production of the harvested biomass was 21,471-29,136 m³·ha^-1·year^-1 and 0.57-1.15 t·ha^-1·year^-1, respectively. The findings of this study demonstrate the feasibility of using VAB-enhanced raceway pond for economically and cost-effectively recovery of nutrients from the wastewater via algal-based byproducts production.

Microalgae Chlorella vulgaris biomass harvesting by natural flocculant: effects on biomass sedimentation, spent medium recycling and lipid extraction

BACKGROUND

Microalgal biomass harvesting using traditional chemicals is costly for the production of biofuels, hindering the scale-up process of the technology. Thus, the search for a cost-effective microalgal harvesting method is extremely important. Using chitosan as a natural flocculant to harvest microalgal biomass seems to be an efficient and convenient solution. Although microalgal biomass flocculation by chitosan has been reported in some previous studies, literature on the harvesting of microalgae C. vulgaris biomass using such polymer is scanty. In addition, there is limited information available on whether the usage of chitosan during the harvesting will affect downstream lipid extraction. Still, whether microalgae can be re-grown with the spent medium after chitosan flocculation is still unknown.

RESULTS

In this study, microalgal biomass harvesting using chitosan as a natural flocculant and aluminum sulfate as a traditional flocculant was compared and evaluated. Optimal doses and effects on biomass sedimentation, spent medium recycling and lipid extraction were investigated. The results showed that the optimal doses for chitosan and aluminum sulfate to achieve more than 90% biomass recovery were 0.25 and 2.5 g/L, respectively. The sedimentation time of 10 min was found to be the most appropriate to remove over 90% biomass from culture. The spent medium after chitosan flocculation could be potentially recycled for the re-cultivation of microalgae, which demonstrated robust growth in comparison with those grown in the recycled medium from aluminum sulfate flocculation. The lipid content of microalgae harvested by chitosan reached 32.9, 4.6% higher than that of those harvested by aluminum sulfate, indicating that the application of the natural flocculant would not impact the downstream extraction of microalgal lipids.

CONCLUSION

The results herein presented, demonstrated that chitosan is applicable for microalgal harvesting during the upscaling process. Flocculation method developed by using chitosan as a natural flocculant is a worthy microalgal harvesting method for microalgae-based biofuel production. There is hope that chitosan can be reasonably and technically realistically applied in a full-scale process for the harvesting of microalgal biomass.