Stimulatory effect and adsorption behavior of rhamnolipids on lignocelluloses degradation system

Tailoring curcumin ternary complex nanocrystals via microfluidic mediated assembly: Stability, solubility, bioaccessibility and formation mechanism

Microfluidic technique was employed to precisely modulate both the microenvironment and composition, enabling the dynamic assembly of curcumin, soy protein isolates, and rhamnolipid into ternary nanocrystals through hydrogen bonding and hydrophobic interactions. As the concentration of rhamnolipid increased, the loading capacity of curcumin in ternary complex nanocrystals rose from 4.23 % to 10.82 %, while its water dispersibility and bioaccessibility enhanced by 141.94- to 664.67-fold and 5.11- to 6.49-fold, respectively. Moreover, the stability of curcumin in ternary complex nanocrystals was significantly enhanced during both storage and exposure to UV light. The longest half-life of curcumin in the nanocrystals increased from 65.39 days to 385.08 days during storage at 25 °C, and from 87.74 min to 198.04 min under UV light. These findings provide important insights for the development of bio-assemblies, and the resulting complex nanocrystals can be used as pigment or bioactivity in foods, cosmetics and pharmaceuticals.

Elaborating the role of rhamnolipids on the formation of humic substances during rice straw composting based on Fenton pretreatment and fungal inoculation

Composting is a green and sustainable way to dispose and reuse agricultural wastes, but the low degradation rate during composting hinders its application. This study was conducted to explore the effect of added surfactant rhamnolipids after Fenton pretreatment and inoculation of fungi (Aspergillus fumigatus) into the compost on the formation of humic substances (HS) during rice straw composting, and explored the effect of this method. The results showed that rhamnolipids speeded up the degradation of organic matter and HS formation during composting. Rhamnolipids promoted the generation of lignocellulose-degrading products after Fenton pretreatment and fungal inoculation. The differential products benzoic acid, ferulic acid, 2, 4-Di-tert-butylphenol and syringic acid were obtained. Additionally, key fungal species and modules were identified using multivariate statistical analysis. Reducing sugars, pH, and total nitrogen were the key environmental factors that affected HS formation. This study provides a theoretical basis for the high-quality transformation of agricultural wastes.

A comprehensive study on microbial-surfactants from bioproduction scale-up toward electrokinetics remediation of environmental pollutants: Challenges and perspectives

Currently, researchers have focused on electrokinetic (EK) bioremediation due to its potential to remove a wide-range of pollutants. Further, to improve their performance, synthetic surfactants are employed as effective additives because of their excellent solubility and mobility. Synthetic surfactants have an excessive position in industries since they are well-established, cheap, and easily available. Nevertheless, these surfactants have adverse environmental effects and could be detrimental to aquatic and terrestrial life. Owing to social and environmental awareness, there is a rising demand for bio-based surfactants in the global market, from environmental sustainability to public health, because of their excellent surface and interfacial activity, higher and stable emulsifying property, biodegradability, non- or low toxicity, better selectivity and specificity at extreme environmental conditions. Unfortunately, challenges to biosurfactants, like expensive raw materials, low yields, and purification processes, hinder their applicability to large-scale. To date, extensive research has already been conducted for production scale-up using multidisciplinary approaches. However, it is still essential to research and develop high-yielding bacteria for bioproduction through traditional and biotechnological advances to reduce production costs. Herein, this review evaluates the recent progress made on microbial-surfactants for bioproduction scale-up and provides detailed information on traditional and advanced genetic engineering approaches for cost-effective bioproduction. Furthermore, this study emphasized the role of electrokinetic (EK) bioremediation and discussed the application of BioS-mediated EK for various pollutants remediation.

Surfactants, Biosurfactants, and Non-Catalytic Proteins as Key Molecules to Enhance Enzymatic Hydrolysis of Lignocellulosic Biomass

Lignocellulosic biomass (LCB) has remained a latent alternative resource to be the main substitute for oil and its derivatives in a biorefinery concept. However, its complex structure and the underdeveloped technologies for its large-scale processing keep it in a state of constant study trying to establish a consolidated process. In intensive processes, enzymes have been shown to be important molecules for the fractionation and conversion of LCB into biofuels and high-value-added molecules. However, operational challenges must be overcome before enzyme technology can be the main resource for obtaining second-generation sugars. The use of additives is shown to be a suitable strategy to improve the saccharification process. This review describes the mechanisms, roles, and effects of using additives, such as surfactants, biosurfactants, and non-catalytic proteins, separately and integrated into the enzymatic hydrolysis process of lignocellulosic biomass. In doing so, it provides a technical background in which operational biomass processing hurdles such as solids and enzymatic loadings, pretreatment burdens, and the unproductive adsorption phenomenon can be addressed.

Surfactant assisted microwave irradiation pretreatment of corncob: Effect on hydrogen production capacity, energy consumption and physiochemical structure

The combination pretreatment strategy is an effective way to intensify photo-fermentative biohydrogen production (PFHP) process. In this study, the synergistic effects of microwave irradiation and surfactants on the hydrogen production performance, energy analysis and structural characteristics was evaluated. Results revealed that hydrogen production performance was improved after microwave irradiation pretreatment (MIP) and surfactants assisted microwave irradiation pretreatment (SMIP). SMIP group had a higher cumulative hydrogen yield (CHY) of 367.87 ± 6.481 mL compared with control group (223.26 ± 4.329 mL) and MIP group (303.66 ± 3.366 mL), which was an increase of 36.01% and 64.77%, respectively. Energy evaluation analysis showed that the energy ratio of SMIP (0.49) was higher than that of MIP (0.37) in the PFHP system, therefore, SMIP can save more energy. After SMIP, the corncob lignocellulose structure was greatly damaged, which was verified by SEM, FTIR, XRD and XPS analyses.

Insights into ferulic acid detoxification mechanism by using a novel adsorbent, AEPA250: The microinteraction of ferulic acid with AEPA250 and Saccharomyces cerevisiae

In this study, a novel adsorbent, Air Environment-prepared Adsorbent at 250 ℃ (AEPA₂₅₀), was used to detoxify the main fermentation inhibitor (ferulic acid) present in the alkali-pretreated hydrolysate. AEPA₂₅₀ reduced the effective concentration of ferulic acid by its adsorption, thereby decreasing the possible interaction of ferulic acid with Saccharomyces cerevisiae. The results indicated that AEPA₂₅₀ functionalized with hydroxyl, carboxyl, and amino groups under acidic conditions with higher binding energies (-45.667, -27.046, and -11.008 kcal mol^-1, respectively) and electronic cloud overlap and shorter bond distances (1.015, 1.010, and 2.094 Å, respectively) than those under the other pH conditions. These differences revealed that the electrostatic interaction dominated ferulic acid adsorption on AEPA₂₅₀. Additionally, under acidic conditions and for carboxyl group functionalized AEPA₂₅₀, energy band gap values of Eg1 were higher than those of Eg2, indicating that ferulic acid provided the π-electrons for the π-π electron donor-acceptor interactions with AEPA₂₅₀. Furthermore, ferulic acid detoxification after AEPA₂₅₀ adsorption caused the regulation of YDR316W-B and YPR137C-B genes of S. cerevisiae. These results might contribute to the development of other more efficient adsorbents and pretreatment methods and allow yeast engineering for improving the scale-up and self-sufficient production of bioethanol in the future.

Adsorption of ferulic acid from an alkali-pretreated hydrolysate using a new effective adsorbent prepared by a thermal processing method

A new adsorbent (AEPA₂₅₀) was prepared using the enzymatic hydrolyzed residue of rice straw in an air environment at 250 ℃ by a thermal processing method. Compared to the commercial adsorbent, AEPA₂₅₀ possessed a larger specific surface area of 277.680 m² g^-1, and the maximum adsorption efficiency of ferulic acid from alkali-pretreated hydrolysate of rice straw achieved 70.33 % at the optimum conditions. Adsorption kinetics and isotherm studies showed that the pseudo second-order (PSO) (0.997 ≤ R² ≤ 0.999) and Liu models (0.931 ≤ R² ≤ 0.997) exhibited better fitting results, which indicated that chemical and saturable adsorption existed between ferulic acid and AEPA₂₅₀. An adsorption thermodynamics study revealed the spontaneous and endothermic adsorption process (ΔH^o > 0 and ΔS^o< 0). Micropore diffusion was defined as the major adsorption rate-limiting step according to the analysis of Webber-Morris and Bangham's model. Additionally, π-π*, ion exchange, hydrogen bonding and precipitation were recognized as the four main mechanisms of ferulic acid removal by AEPA₂₅₀ through SEM/EDX, EDX mapping, XPS, FTIR and XRD analysis. These results indicated that AEPA₂₅₀ was effective for adsorbing inhibitors in pretreated rice straw hydrolysates, and it has high potential for application in establishing the self-sufficient production process of bioethanol.

Enhanced biodegradation of n-Hexadecane in solid-phase of soil by employing immobilized Pseudomonas Aeruginosa on size-optimized coconut fibers

In this research, biodegradation of hexadecane as a model contaminant in solid soil using both free and immobilized Pseudomonas Aeruginosa, capable of producing biosurfactant, was investigated. Coconut fibers in three mesh sizes were used as a cellulosic biocarrier for immobilization procedure. Bioremediation experiments were monitored for 60 days after incubation at 27 °C in small columns, containing contaminated solid soil, with the capability of aeration from bottom to top. The difference in the number of immobilized bacteria cells on the fibers with different particle sizes, emphasizes the importance of choosing an optimized carrier size. Enhancement in hexadecane degradation up to 50 % at the end of experiments was achieved by immobilized Pseudomonas Aeruginosa on the fibers with a mesh size between 8 and 16 compared to inoculation of free bacteria cells into the soil. Effect of mixing the pretreated fibers with soil and inoculating free cells into this mixture was also investigated compared to free cell experiments without fiber, which led to 28 % decrease in hexadecane degradation. Obtained kinetic equations for experiments confirm the impact of immobilization of bacteria on the enhancement of biodegradation rate and reduction of the half-life of the contaminant is soil.

Mechanisms for rhamnolipids-mediated biodegradation of hydrophobic organic compounds

The widespread existence of hydrophobic organic compounds (HOCs) in soil and water poses a potential health hazard to human, such as skin diseases, heart diseases, carcinogenesis, etc. Surfactant-enhanced bioremediation has been regarded as one of the most viable technologies to treat HOCs contaminated soil and groundwater. As a biosurfactant that has been intensively studied, rhamnolipids have shown to enhance biodegradation of HOCs in the environment, however, the underlying mechanisms are not fully disclosed. In this paper, properties and production of rhamnolipids are summarized. Then effects of rhamnolipids on the biodegradation of HOCs, including solubilization, altering cell affinity to HOCs, and facilitating microbial uptake are reviewed in detail. Special attention is paid to how rhamnolipids change the bioavailability of HOCs, which are crucial for understanding the mechanism of rhamnolipids-mediated biodegradation. The biodegradation and toxicity of rhamnolipids are also discussed. Finally, perspectives and future research directions are proposed. This review adds insight to rhamnolipids-enhanced biodegradation process, and helps in application of rhamnolipids in bioremediation.

Nano@lignocellulose intercalated montmorillonite as adsorbent for effective Mn(II) removal from aqueous solution

This paper describes the preparation of nano@lignocellulose (nano@LC) and a nano@lignocellulose/montmorillonite (nano@LC/MT) nanocomposite, as well as the capacity of the nano@LC/MT for adsorbing manganese ions from aqueous solution. The structure of nano@LC and nano@LC/MT was characterised by Fourier-transform infrared spectroscopy, X-ray diffraction, Scanning electron microscopy, and Transmission electron microscopy, which revealed that the diffraction peak of montmorillonite almost disappeared, infrared bands of the functional groups shifted, and morphology of the material changed after the formation of the composite. The optimum conditions for the adsorption of Mn(II) on the nano@LC/MT nanocomposite were investigated in detail by changing the initial Mn(II) concentration, pH, adsorption temperature, and time. The results revealed that the adsorption capacity of the nano@LC/MT nanocomposite for Mn(II) reached 628.0503 mg/g at a Mn(II) initial concentration of 900 mg/L, solution pH 5.8, adsorption temperature 55 °C, and adsorption time 160 min. Adsorption kinetics experiments revealed good agreement between the experimental data and the pseudo-second order kinetic model. The experimental data was satisfactorily fitted to the Langmuir isotherm. Adsorption-desorption results showed that nano@LC/MT exhibited excellent reusability. The adsorption mechanism was investigated through FT-IR and EDX spectroscopic analyses. The results suggested that nano@LC/MT have great potential in removing Mn(II) from water.

Enhancing bioethanol production from water hyacinth by new combined pretreatment methods

This study investigated the possibility of enhancing bioethanol production by combined pretreatment methods for water hyacinth. Three different kinds of pretreatment methods, including microbial pretreatment, microbial combined dilute acid pretreatment, and microbial combined dilute alkaline pretreatment, were investigated for water hyacinth degradation. The results showed that microbial combined dilute acid pretreatment is the most effective method, resulting in the highest cellulose content (39.4 ± 2.8%) and reducing sugars production (430.66 mg·g^-1). Scanning Electron Microscopy and Fourier Transform Infrared Spectrometer analysis indicated that the basic tissue of water hyacinth was significantly destroyed. Compared to the other previously reported pretreatment methods for water hyacinth, which did not append additional cellulase and microbes for hydrolysis process, the microbial combined dilute acid pretreatment of our research could achieve the highest reducing sugars. Moreover, the production of bioethanol could achieve 1.40 g·L^-1 after fermentation, which could provide an extremely promising way for utilization of water hyacinth.

Enhancing enzymatic hydrolysis of coconut husk through Pseudomonas aeruginosa AP 029/GLVIIA rhamnolipid preparation

This work investigated the influence of chemical (Triton X-100) and biological surfactant preparation (rhamnolipids) in coconut husk hydrolysis that was subjected to pretreatment with acid-alkali or alkaline hydrogen peroxide. The natural and pretreated biomass was characterized using the National Renewable Energy Laboratory protocol analysis as well as X-ray diffraction and scanning electron microscopy. The results demonstrated that in terms of the total reducing sugars, there was no significant difference between the hydrolysis using Triton X-100 and rhamnolipids, regardless of the pretreatment. A cellulosic conversion value as high as 33.0% was obtained in experiments with rhamnolipids. The coconut husk was observed to be a potential biomass that could produce second generation ethanol, and the rhamnolipid preparation can be used to support for the enzymatic hydrolysis, enhancing the advantage of cellulose conversion into glucose over chemical surfactants because it is an environmentally friendly approach.