Enhanced alcohol titre and ratio in carbon monoxide-rich off-gas fermentation of Clostridium carboxidivorans through combination of trace metals optimization with variable-temperature cultivation

The potential of native and engineered Clostridia for biomass biorefining

Since their first industrial application in the acetone-butanol-ethanol (ABE) fermentation in the early 1900s, Clostridia have found large application in biomass biorefining. Overall, their fermentation products include organic acids (e.g., acetate, butyrate, lactate), short chain alcohols (e.g., ethanol, n-butanol, isobutanol), diols (e.g., 1,2-propanediol, 1,3-propanediol) and H2 which have several applications such as fuels, building block chemicals, solvents, food and cosmetic additives. Advantageously, several clostridial strains are able to use cheap feedstocks such as lignocellulosic biomass, food waste, glycerol or C1-gases (CO2, CO) which confer them additional potential as key players for the development of processes less dependent from fossil fuels and with reduced greenhouse gas emissions. The present review aims to provide a survey of research progress aimed at developing Clostridium-mediated biomass fermentation processes, especially as regards strain improvement by metabolic engineering.

Optimization of CO fermentation by Clostridium carboxidivorans in batch reactors: Effects of the medium composition

OBJECTIVES

The objective of this study was to investigate the effects of medium composition on CO fermentation by Clostridium carboxidivorans. The focus was to reduce the medium cost preserving acceptable levels of solvent production.

METHODS

Yeast extract (YE) concentration was set in the range of 0-3 g/L. Different reducing agents were investigated, including cysteine-HCl 0.6 g/L, pure cysteine 0.6 g/L, sodium sulphide (Na2S) 0.6 g/L, cysteine-sodium sulphide 0.6 g/L and cysteine-sodium sulphide 0.72 g/L. The concentration of the metal solution was decreased down to 25 % of the standard value. Fermentation tests were also carried out with and without tungsten or selenium.

RESULTS

The results demonstrated that under optimized conditions, namely yeast extract (YE) concentration set at 1 g/L, pure cysteine as the reducing agent and trace metal concentration reduced to 75 % of the standard value, reasonable solvent production was achieved in less than 150 h. Under these operating conditions, the production levels were found to be 1.39 g/L of ethanol and 0.27 g/L of butanol. Furthermore, the study revealed that selenium was not necessary for C. carboxidivorans fermentation, whereas the presence of tungsten played a crucial role in both cell growth and solvent production.

CONCLUSIONS

The optimization of the medium composition in CO fermentation by Clostridium carboxidivorans is crucial for cost-effective solvent production. Tuning the yeast extract (YE) concentration, using pure cysteine as the reducing agent and reducing trace metal concentration contribute to reasonable solvent production within a relatively short fermentation period. Tungsten is essential for cell growth and solvent production, while selenium is not required.

The Restriction-Modification Systems of Clostridium carboxidivorans P7

Clostridium carboxidivorans P7 (DSM 15243) is a bacterium that converts syngas (a mixture of CO, H2, and CO2) into hexanol. An optimized and scaled-up industrial process could therefore provide a renewable source of fuels and chemicals while consuming industry waste gases. However, the genetic engineering of this bacterium is hindered by its multiple restriction-modification (RM) systems: the genome of C. carboxidivorans encodes at least ten restriction enzymes and eight methyltransferases (MTases). To gain insight into the complex RM systems of C. carboxidivorans, we analyzed genomic methylation patterns using single-molecule real-time (SMRT) sequencing and bisulfite sequencing. We identified six methylated sequence motifs. To match the methylation sites to the predicted MTases of C. carboxidivorans, we expressed them individually in Escherichia coli for functional characterization. Recognition motifs were identified for all three Type I MTases (CAYNNNNNCTGC/GCAGNNNNNRTG, CCANNNNNNNNTCG/CGANNNNNNNNTGG and GCANNNNNNNTNNCG/CGNNANNNNNNNTGC), two Type II MTases (GATAAT and CRAAAAR), and a single Type III MTase (GAAAT). However, no methylated recognition motif was found for one of the three Type II enzymes. One recognition motif that was methylated in C. carboxidivorans but not in E. coli (AGAAGC) was matched to the remaining Type III MTase through a process of elimination. Understanding these enzymes and the corresponding recognition sites will facilitate the development of genetic tools for C. carboxidivorans that can accelerate the industrial exploitation of this strain.

Expanding the product portfolio of carbon dioxide and hydrogen-based gas fermentation with an evolved strain of Clostridium carboxidivorans

CO2:H2-based gas fermentation with acetogenic Clostridium species are at an early stage of development. This work exploited the Adaptive Laboratory Evolution technique to improve the growth of C. carboxidivorans P7 on CO2 and H2. An adapted strain with decreased growth lag phase and improved biomass production was obtained. Genomic analysis revealed a conserved frameshift mutation in the catalytic subunit of the hexameric hydrogenase gene. The resulted truncated protein variant, most likely lacking its functionality, suggests that other hydrogenases might be more efficient for H2-based growth of this strain. Furthermore, the adapted strain generated hexanol as primary fermentation product. For the first time, hexanol was produced directly from CO2:H2 blend, achieving the highest maximum productivity reported so far via gas fermentation. Traces of valerate, pentanol, eptanol and octanol were observed in the fermentation broth. The adapted strain shows promising to enrich the product spectrum targetable by future gas fermentation processes.

Acetogen and acetogenesis for biological syngas valorization

The bioconversion of syngas using (homo)acetogens as biocatalysts shows promise as a viable option due to its higher selectivity and milder reaction conditions compared to thermochemical conversion. The current bioconversion process operates primarily to produce C2 chemicals (e.g., acetate and ethanol) with sufficient technology readiness levels (TRLs) in process engineering (as midstream) and product purification (as downstream). However, the economic feasibility of this process could be improved with greater biocatalytic options in the upstream phase. This review focuses on the Wood-Ljungdahl pathway (WLP) which is a biological syngas-utilization pathway, redox balance and ATP generation, suggesting that the use of a specific biocatalysts including Eubacterium limosum could be advantageous in syngas valorization. A pertinent strategy to mainly produce chemicals with a high degree of reduction is also provided with examples of flux control, mixed cultivation and mixotrophy. Finally, this article presents future direction of industrial utilization of syngas fermentation.

Production of biofuels from C1 -gases with Clostridium and related bacteria-Recent advances

Clostridium spp. are suitable for the bioconversion of C₁ -gases (e.g., CO₂ , CO and syngas) into different bioproducts. These products can be used as biofuels and are reviewed here, focusing on ethanol, butanol and hexanol, mainly. The production of higher alcohols (e.g., butanol and hexanol) has hardly been reviewed. Parameters affecting the optimization of the bioconversion process and bioreactor performance are addressed as well as the pathways involved in these bioconversions. New aspects, such as mixotrophy and sugar versus gas fermentation, are also reviewed. In addition, Clostridia can also produce higher alcohols from the integration of the Wood-Ljungdahl pathway and the reverse ß-oxidation pathway, which has also not yet been comprehensively reviewed. In the latter process, the acetogen uses the reducing power of CO/syngas to reduce C₄ or C₆ fatty acids, previously produced by a chain elongating microorganism (commonly Clostridium kluyveri), into the corresponding bioalcohol.

Strategic nutrient sourcing for biomanufacturing intensification

The successful design of economically viable bioprocesses can help to abate global dependence on petroleum, increase supply chain resilience, and add value to agriculture. Specifically, bioprocessing provides the opportunity to replace petrochemical production methods with biological methods and to develop novel bioproducts. Even though a vast range of chemicals can be biomanufactured, the constraints on economic viability, especially while competing with petrochemicals, are severe. There have been extensive gains in our ability to engineer microbes for improved production metrics and utilization of target carbon sources. The impact of growth medium composition on process cost and organism performance receives less attention in the literature than organism engineering efforts, with media optimization often being performed in proprietary settings. The widespread use of corn steep liquor as a nutrient source demonstrates the viability and importance of "waste" streams in biomanufacturing. There are other promising waste streams that can be used to increase the sustainability of biomanufacturing, such as the use of urea instead of fossil fuel-intensive ammonia and the use of struvite instead of contributing to the depletion of phosphate reserves. In this review, we discuss several process-specific optimizations of micronutrients that increased product titers by twofold or more. This practice of deliberate and thoughtful sourcing and adjustment of nutrients can substantially impact process metrics. Yet the mechanisms are rarely explored, making it difficult to generalize the results to other processes. In this review, we will discuss examples of nutrient sourcing and adjustment as a means of process improvement.

ONE-SENTENCE SUMMARY

The potential impact of nutrient adjustments on bioprocess performance, economics, and waste valorization is undervalued and largely undercharacterized.

Effective hexanol production from carbon monoxide using extractive fermentation with Clostridium carboxidivorans P7

This study achieved high production of hexanol via gas fermentation using Clostridium carboxidivorans P7 by extracting hexanol from the fermentation broth. The hexanol extraction efficiency and inhibitory effects on C. carboxidivorans P7 of 2-butyl-1-octanol, hexyl hexanoate and oleyl alcohol were examined, and oleyl alcohol was selected as the extraction solvent. Oleyl alcohol was added at the beginning of fermentation and during fermentation or a small volume of oleyl alcohol was repeatedly added during fermentation. The addition of a small volume of oleyl alcohol during fermentation was the most effective for CO consumption and hexanol production (5.06 g/L), yielding the highest known hexanol titer through any type of fermentation including gas fermentation. Hexanol production was further enhanced to 8.45 g/L with the repeated addition of oleyl alcohol and ethanol during gas fermentation. The results of this study will enable sustainable and carbon-neutral hexanol production via gas fermentation.

Production of butanol from lignocellulosic biomass: recent advances, challenges, and prospects

Due to energy and environmental concerns, biobutanol is gaining increasing attention as an alternative renewable fuel owing to its desirable fuel properties. Biobutanol production from lignocellulosic biomass through acetone-butanol-ethanol (ABE) fermentation has gained much interest globally due to its sustainable supply and non-competitiveness with food, but large-scale fermentative production suffers from low product titres and poor selectivity. This review presents recent developments in lignocellulosic butanol production, including pretreatment and hydrolysis of hemicellulose and cellulose during ABE fermentation. Challenges are discussed, including low concentrations of fermentation sugars, inhibitors, detoxification, and carbon catabolite repression. Some key process improvements are also summarised to guide further research and development towards more profitable and commercially viable butanol fermentation.

Mixotrophic co-utilization of glucose and carbon monoxide boosts ethanol and butanol productivity of continuous Clostridium carboxidivorans cultures

In this study, continuous cultivations of C.carboxidivorans to study heterotrophic and mixotrophic conversion of glucose and H₂, CO₂, and CO were established. Glucose fermentations at pH 6 showed a high ratio of alcohol-to-acid production of 2.79 mol mol^-1. While H₂ or CO₂ were not utilized together with glucose, CO feeding drastically increased the combined alcohol titer to 9.1 g l^-1. Specifically, CO enhanced acetate (1.9-fold) and ethanol (1.7-fold) production and triggered chain elongation to butanol (1.5-fold) production but did not change the alcohol:acid ratio. Flux balance analysis showed that CO served both as a carbon and energy source, and CO mixotrophy displayed a carbon and energy efficiency of 45 and 77%, respectively. This study expands the knowledge on physiology and metabolism of C.carboxidivorans and can serve as the starting point for rational engineering and process intensification to establish efficient production of alcohols and acids from carbon waste.

Metabolic engineering of Clostridium ljungdahlii for the production of hexanol and butanol from CO2 and H2

BACKGROUND

The replacement of fossil fuels and petrochemicals with sustainable alternatives is necessary to mitigate the effects of climate change and also to counteract diminishing fossil resources. Acetogenic microorganisms such as Clostridium spp. are promising sources of fuels and basic chemical precursors because they efficiently utilize CO and CO₂ as carbon source. However the conversion into high titers of butanol and hexanol is challenging.

RESULTS

Using a metabolic engineering approach we transferred a 17.9-kb gene cluster via conjugation, containing 13 genes from C. kluyveri and C. acetobutylicum for butanol and hexanol biosynthesis, into C. ljungdahlii. Plasmid-based expression resulted in 1075 mg L^-1 butanol and 133 mg L^-1 hexanol from fructose in complex medium, and 174 mg L^-1 butanol and 15 mg L^-1 hexanol from gaseous substrate (20% CO₂ and 80% H₂) in minimal medium. Product formation was increased by the genomic integration of the heterologous gene cluster. We confirmed the expression of all 13 enzymes by targeted proteomics and identified potential rate-limiting steps. Then, we removed the first-round selection marker using CRISPR/Cas9 and integrated an additional 7.8 kb gene cluster comprising 6 genes from C. carboxidivorans. This led to a significant increase in the hexanol titer (251 mg L^-1) at the expense of butanol (158 mg L^-1), when grown on CO₂ and H₂ in serum bottles. Fermentation of this strain at 2-L scale produced 109 mg L^-1 butanol and 393 mg L^-1 hexanol.

CONCLUSIONS

We thus confirmed the function of the butanol/hexanol biosynthesis genes and achieved hexanol biosynthesis in the syngas-fermenting species C. ljungdahlii for the first time, reaching the levels produced naturally by C. carboxidivorans. The genomic integration strain produced hexanol without selection and is therefore suitable for continuous fermentation processes.

Production of Hexanol as the Main Product Through Syngas Fermentation by Clostridium carboxidivorans P7

The production of hexanol from syngas by acetogens has gained attention as a replacement for petroleum-derived hexanol, which is widely used in the chemical synthesis and plastic industries. However, acetogenic bacteria generally produce C2 compounds (e.g., acetate and ethanol) as the main products. In this study, the gas fermentation conditions favorable for hexanol production were investigated at different temperatures (30-37°C) and CO gas contents (30-70%) in batch gas fermentation. Hexanol production increased from 0.02 to 0.09 g/L when the cultivation temperature was lowered from 37 to 30°C. As the CO content increased from 30 to 70%, the CO consumption rate and hexanol production (yield, titer, and ratio of C6 compound to total products) increased with the CO content. When 70% CO gas was repeatedly provided by flushing the headspace of the bottles at 30°C, the total alcohol production increased to 4.32 g/L at the expense of acids. Notably, hexanol production (1.90 g/L) was higher than that of ethanol (1.20 g/L) and butanol (1.20 g/L); this is the highest level of hexanol produced in gas fermentation to date and the first report of hexanol as the main product. Hexanol production was further enhanced to 2.34 g/L when 2 g/L ethanol was supplemented at the beginning of 70% CO gas refeeding fermentation. Particularly, hexanol productivity was significantly enhanced to 0.18 g/L/day while the supplemented ethanol was consumed, indicating that the conversion of ethanol to acetyl-CoA and reducing equivalents positively affected hexanol production. These optimized culture conditions (gas fermentation at 30°C and refeeding with 70% CO gas) and ethanol supplementation provide an effective and sustainable approach for bio-hexanol production.

Impact of different trace elements on metabolic routes during heterotrophic growth of C. ljungdahlii investigated through online measurement of the carbon dioxide transfer rate

Synthesis gas fermentation using acetogenic clostridia is a rapidly increasing research area. It offers the possibility to produce platform chemicals from sustainable C1 carbon sources. The Wood-Ljungdahl pathway (WLP), which allows acetogens to grow autotrophically, is also active during heterotrophic growth. It acts as an electron sink and allows for the utilization of a wide variety of soluble substrates and increases ATP yields during heterotrophic growth. While glycolysis leads to CO₂ evolution, WLP activity results in CO₂ fixation. Thus, a reduction of net CO₂ emissions during growth with sugars is an indicator of WLP activity. To study the effect of trace elements and ventilation rates on the interaction between glycolysis and the WLP, the model acetogen Clostridium ljungdahlii was cultivated in YTF medium, a complex medium generally employed for heterotrophic growth, with fructose as growth substrate. The recently reported anaRAMOS device was used for online measurement of metabolic activity, in form of CO₂ evolution. The addition of multiple trace elements (iron, cobalt, manganese, zinc, nickel, copper, selenium, and tungsten) was tested, to study the interaction between glycolysis and the Wood ljungdahl pathway. While the addition of iron(II) increased growth rates and ethanol production, added nickel(II) increased WLP activity and acetate formation, reducing net CO₂ production by 28%. Also, higher CO₂ availability through reduced volumetric gas flow resulted in 25% reduction of CO₂ evolution. These online metabolic data demonstrate that the anaRAMOS is a valuable tool in the investigation of metabolic responses i.e. to determine nutrient requirements that results in reduced CO₂ production. Thereby the media composition can be optimized depending on the specific goal. This article is protected by copyright. All rights reserved.

Protein acetylation-mediated cross-regulation of acetic acid and ethanol synthesis in the gas-fermenting Clostridium ljungdahlii

The autotrophic acetogen Clostridium ljungdahlii has emerged as a major candidate in the biological conversion of one-carbon gases (CO₂/CO) to bulk chemicals and fuels. Nevertheless, the regulatory pathways and downstream metabolic changes responsible for product formation and distribution in this bacterium remain minimally explored. Protein lysine acetylation (PLA), a prevalent posttranslational modification, controls numerous crucial cellular functions. Herein, we revealed a novel cross-regulatory mechanism that uses both the PLA system and transcription factors to regulate the carbon flow distribution for product formation in C. ljungdahlii. The dominant acetylation/deacetylation system (At2/Dat1) in C. ljungdahlii was found to regulate the ratio of two major products, acetic acid and ethanol. Subsequent genetic and biochemical analyses revealed that the activities of Pta and AdhE1, two crucial enzymes responsible for acetic acid and ethanol synthesis, respectively, were greatly affected by their levels of PLA. We found that the acetylation statuses of Pta and AdhE1 underwent significant dynamic changes during the fermentation process, leading to differential synthesis of acetic acid and ethanol. Furthermore, the crucial redox-sensing protein Rex was shown to be regulated by PLA, which subsequently altered its transcriptional regulation on genes responsible for acetic acid and ethanol formation and distribution. Based on our understanding of this cross-regulatory module, we optimized the ethanol synthetic pathway by modifying the acetylation status (deacetylation-mimicked mutations of crucial lysine residues) of the related key enzyme, achieving significantly increased titer and yield of ethanol, an important chemical and fuel, by C. ljungdahlii in gas fermentation.

Biofuel and chemical production from carbon one industry flux gas by acetogenic bacteria

Carbon one industry flux gas generated from fossil fuels, various industrial and domestic waste, as well as lignocellulosic biomass provides an innovative raw material to lead the sustainable development. Through the chemical and biological processing, the gas mixture composed of CO, CO₂, and H₂, also termed as syngas, is converted to biofuels and high-value chemicals. Here, the syngas fermentation process is elaborated to provide an overview. Sources of syngas are summarized and the influences of impurities on biological fermentation are exhibited. Acetogens and carboxydotrophs are the two main clusters of syngas utilizing microorganisms, their essential characters are presented, especially the energy metabolic scheme with CO, CO₂, and H₂. Synthetic biology techniques and microcompartment regulation are further discussed and proposed to create a high-efficiency cell factory. Moreover, the influencing factors in fermentation and products in carboxylic acids, alcohols, and others such like polyhydroxyalkanoate and poly-3-hydroxybutyrate are addressed. Biological fermentation from carbon one industry flux gas is a promising alternative, the latest scientific advances are expatiated hoping to inspire more creative transformation.

Citrulline deiminase pathway provides ATP and boosts growth of Clostridium carboxidivorans P7

BACKGROUND

Clostridium carboxidivorans P7 is capable of producing ethanol and butanol from inexpensive and non-food feedstock, such as syngas. Achieving improved ethanol and butanol production in the strain for industrial application depends on the energetics and biomass, especially ATP availability.

RESULTS

This study found that exogenous addition of citrulline promoted accumulation of ATP, increased specific growth rate, and reduced the doubling time of C. carboxidivorans P7. In heterotrophic fermentation experiments, the addition of citrulline increased intracellular ATP by 3.39-fold, significantly enhancing the production of total alcohol (ethanol + butanol) by 20%. Moreover, in the syngas fermentation experiments, the addition of citrulline improved the level of intracellular ATP and the biomass by 80.5% and 31.6%, respectively, resulting in an 18.6% and 60.3% increase in ethanol and the alcohol/acid production ratio, respectively.

CONCLUSIONS

This is the first report that citrulline could promote the growth of C. carboxidivorans P7 and increase the level of intracellular ATP, which is of great significance for the use of C. carboxidivorans P7 to synthesize biofuels.

Residual Gas for Ethanol Production by Clostridium carboxidivorans in a Dual Impeller Stirred Tank Bioreactor (STBR)

Recycling residual industrial gases and residual biomass as substrates to biofuel production by fermentation is an important alternative to reduce organic wastes and greenhouse gases emission. Clostridium carboxidivorans can metabolize gaseous substrates as CO and CO2 to produce ethanol and higher alcohols through the Wood-Ljungdahl pathway. However, the syngas fermentation is limited by low mass transfer rates. In this work, a syngas fermentation was carried out in serum glass bottles adding different concentrations of Tween® 80 in ATCC® 2713 culture medium to improve gas-liquid mass transfer. We observed a 200% increase in ethanol production by adding 0.15% (v/v) of the surfactant in the culture medium and a 15% increase in biomass production by adding 0.3% (v/v) of the surfactant in the culture medium. The process was reproduced in stirred tank bioreactor with continuous syngas low flow, and a maximum ethanol productivity of 0.050 g/L.h was achieved.

Hexanol biosynthesis from syngas by Clostridium carboxidivorans P7 - product toxicity, temperature dependence and in situ extraction

Clostridium carboxidivorans converts syngas into industrial alcohols like hexanol, but titers may be limited by product toxicity. Investigation of IC₅₀ at 30 °C (17.5 mM) and 37 °C (11.8 mM) revealed increased hexanol tolerance at lower temperatures. To avoid product toxicity, oleyl alcohol was added as an extraction solvent, increasing hexanol production nearly 2.5-fold to 23.9 mM (2.4 g/L) at 30 °C. This titer exceeds the concentration that is acutely toxic in the absence of a solvent, confirming the hypothesis that current hexanol production is limited by product toxicity. The solvent however had no positive effect at 37 °C. Furthermore, C. carboxidivorans cell membranes adapted to the higher temperature by incorporating more saturated fatty acids, but surprisingly not to hexanol. Corn oil and sunflower seed oil were tested as alternative, inexpensive extraction solvents. Hexanol titers were similar with all solvents, but oleyl alcohol achieved the highest extraction efficiency.

Developing Clostridia as Cell Factories for Short- and Medium-Chain Ester Production

Short- and medium-chain volatile esters with flavors and fruity fragrances, such as ethyl acetate, butyl acetate, and butyl butyrate, are usually value-added in brewing, food, and pharmacy. The esters can be naturally produced by some microorganisms. As ester-forming reactions are increasingly deeply understood, it is possible to produce esters in non-natural but more potential hosts. Clostridia are a group of important industrial microorganisms since they can produce a variety of volatile organic acids and alcohols with high titers, especially butanol and butyric acid through the CoA-dependent carbon chain elongation pathway. This implies sufficient supplies of acyl-CoA, organic acids, and alcohols in cells, which are precursors for ester production. Besides, some Clostridia could utilize lignocellulosic biomass, industrial off-gas, or crude glycerol to produce other branched or straight-chain alcohols and acids. Therefore, Clostridia offer great potential to be engineered to produce short- and medium-chain volatile esters. In the review, the efforts to produce esters from Clostridia via in vitro lipase-mediated catalysis and in vivo alcohol acyltransferase (AAT)-mediated reaction are comprehensively revisited. Besides, the advantageous characteristics of several Clostridia and clostridial consortia for bio-ester production and the driving force of synthetic biology to clostridial chassis development are also discussed. It is believed that synthetic biotechnology should enable the future development of more effective Clostridia for ester production.

The effect of corn syrup and whey on the conversion process of CO to ethanol using Clostridium ljungdahlii

CO is one of the toxic components of syngas, which is the major source of air pollution. Syngas fermentation technology has the ability to convert toxic gases into valuable biofuels, such as ethanol. Fermentative ethanol production is an important method that can be used to promote environmental protection. CO can be converted into ethanol, via the Wood-Ljungdahl pathway, using Clostridium ljungdahlii. The components of the growing medium--especially the trace-element solution and yeast extract--are the main reasons for the high costs associated with this process, however, and this especially impacts scaled-up operations. In this study, cheaper substitutes for these components were used in order to determine their effect on ethanol production. The study comprised three main parts--the optimization of CO concentration, and the substitution of corn syrup and whey powder in the process. The optimum volume of CO for ethanol production was found to be 10 mL. Corn syrup can be used instead of trace-element solution, but the use of yeast extract with the corn syrup was determined to be essential. Up to 1.4 g/L ethanol production was observed with the addition of 15 mL corn syrup. Whey powder had the advantage of being usable without yeast extract, with up to 2.5 g/L ethanol being produced from a 30-g/L concentration. The main finding was that either corn syrup or whey powder can be used as substitutes for expensive basal-medium components.

Syngas Derived from Lignocellulosic Biomass Gasification as an Alternative Resource for Innovative Bioprocesses

A hybrid system based on lignocellulosic biomass gasification and syngas fermentation represents a second-generation biorefinery approach that is currently in the development phase. Lignocellulosic biomass can be gasified to produce syngas, which is a gas mixture consisting mainly of H2, CO, and CO2. The major challenge of biomass gasification is the syngas’s final quality. Consequently, the development of effective syngas clean-up technologies has gained increased interest in recent years. Furthermore, the bioconversion of syngas components has been intensively studied using acetogenic bacteria and their Wood–Ljungdahl pathway to produce, among others, acetate, ethanol, butyrate, butanol, caproate, hexanol, 2,3-butanediol, and lactate. Nowadays, syngas fermentation appears to be a promising alternative for producing commodity chemicals in comparison to fossil-based processes. Research studies on syngas fermentation have been focused on process design and optimization, investigating the medium composition, operating parameters, and bioreactor design. Moreover, metabolic engineering efforts have been made to develop genetically modified strains with improved production. In 2018, for the first time, a syngas fermentation pilot plant from biomass gasification was built by LanzaTech Inc. in cooperation with Aemetis, Inc. Future research will focus on coupling syngas fermentation with additional bioprocesses and/or on identifying new non-acetogenic microorganisms to produce high-value chemicals beyond acetate and ethanol.

Combination of Trace Metal to Improve Solventogenesis of Clostridium carboxidivorans P7 in Syngas Fermentation

Higher alcohols such as butanol (C4 alcohol) and hexanol (C6 alcohol) are superior biofuels compared to ethanol. Clostridium carboxidivorans P7 is a typical acetogen capable of producing C4 and C6 alcohols natively. In this study, the composition of trace metals in culture medium was adjusted, and the effects of these adjustments on artificial syngas fermentation by C. carboxidivorans P7 were investigated. Nickel and ferrous ions were essential for growth and metabolite synthesis during syngas fermentation by P7. However, a decreased dose of molybdate improved alcohol fermentation performance by stimulating carbon fixation and solventogenesis. In response to the modified trace metal composition, cells grew to a maximum OD_{600 nm} of 1.6 and accumulated ethanol and butanol to maximum concentrations of 2.0 and 1.0 g/L, respectively, in serum bottles. These yields were ten-fold higher than the yields generated using the original composition of trace metals. Furthermore, 0.5 g/L of hexanol was detected at the end of fermentation. The results from gene expression experiments examining genes related to carbon fixation and organic acid and solvent synthesis pathways revealed a dramatic up-regulation of the Wood-Ljungdahl pathway (WLP) gene cluster, the bcs gene cluster, and a putative CoA transferase and butanol dehydrogenase, thereby indicating that both de novo synthesis and acid re-assimilation contributed to the significantly elevated accumulation of higher alcohols. The bdh35 gene was speculated to be the key target for butanol synthesis during solventogenesis.

Effect of temperature and surfactant on biomass growth and higher-alcohol production during syngas fermentation by Clostridium carboxidivorans P7

Hexanol–butanol–ethanol fermentation from syngas by Clostridium carboxidivorans P7 is a promising route for biofuel production. However, bacterial agglomeration in the culture of 37 °C severely hampers the accumulation of biomass and products. To investigate the effect of culture temperature on biomass growth and higher-alcohol production, C. carboxidivorans P7 was cultivated at both constant and two-step temperatures in the range from 25 to 37 °C. Meanwhile, Tween-80 and saponin were screened out from eight surfactants to alleviate agglomeration at 37 °C. The results showed that enhanced higher-alcohol production was contributed mainly by the application of two-step temperature culture rather than the addition of anti-agglomeration surfactants. Furthermore, comparative transcriptome revealed that although 37 °C promoted high expression of genes involved in the Wood–Ljungdahl pathway, genes encoding enzymes catalyzing acyl-condensation reactions associated with higher-alcohol production were highly expressed at 25 °C. This study gained greater insight into temperature-effect mechanism on syngas fermentation by C. carboxidivorans P7.

Experimental Design to Improve Cell Growth and Ethanol Production in Syngas Fermentation by Clostridium carboxidivorans

Fermentation of gases from biomass gasification, named syngas, is an important alternative process to obtain biofuels. Sequential experimental designs were used to increase cell growth and ethanol production during syngas fermentation by Clostridium carboxidivorans. Based on ATCC (American Type Culture Collection) 2713 medium composition, it was possible to propose a best medium composition for cell growth, herein called TYA (Tryptone-Yeast extract-Arginine) medium and another one for ethanol production herein called TPYGarg (Tryptone-Peptone-Yeast extract-Glucose-Arginine) medium. In comparison to ATCC® 2713 medium, TYA increased cell growth by 77%, reducing 47% in cost and TPYGarg increased ethanol production more than four-times, and the cost was reduced by 31%. In 72 h of syngas fermentation in TPYGarg medium, 1.75-g/L of cells, 2.28 g/L of ethanol, and 0.74 g/L of butanol were achieved, increasing productivity for syngas fermentation.

Clostridium sp. as Bio-Catalyst for Fuels and Chemicals Production in a Biorefinery Context

Clostridium sp. is a genus of anaerobic bacteria capable of metabolizing several substrates (monoglycerides, diglycerides, glycerol, carbon monoxide, cellulose, and more), into valuable products. Biofuels, such as ethanol and butanol, and several chemicals, such as acetone, 1,3-propanediol, and butyric acid, can be produced by these organisms through fermentation processes. Among the most well-known species, Clostridium carboxidivorans, C. ragsdalei, and C. ljungdahlii can be highlighted for their ability to use gaseous feedstocks (as syngas), obtained from the gasification or pyrolysis of waste material, to produce ethanol and butanol. C. beijerinckii is an important species for the production of isopropanol and butanol, with the advantage of using hydrolysate lignocellulosic material, which is produced in large amounts by first-generation ethanol industries. High yields of 1,3 propanediol by C. butyricum are reported with the use of another by-product from fuel industries, glycerol. In this context, several Clostridium wild species are good candidates to be used as biocatalysts in biochemical or hybrid processes. In this review, literature data showing the technical viability of these processes are presented, evidencing the opportunity to investigate them in a biorefinery context.

Metabolic engineering of Clostridium carboxidivorans for enhanced ethanol and butanol production from syngas and glucose

Clostridium carboxidivorans can convert CO₂, CO and H₂ to ethanol and n-butanol; however, its industrial application is limited by the lack of tools for metabolic pathway engineering. In this study, C. carboxidivorans was successfully engineered to overexpress aor, adhE2, and fnr together with adhE2 or aor. In glucose fermentation, all engineered strains showed higher alcohol yields compared to the wild-type. Strains overexpressing aor showed CO₂ re-assimilation during heterotrophic growth. In syngas fermentation, compared to the wild-type, the strain overexpressing adhE2 produced ∼50% more ethanol and the strain overexpressing adhE2 and fnr produced ∼18% more butanol and ∼22% more ethanol. Interestingly, both strains showed obvious acid re-assimilation, with <0.15 g/L total acid remaining at the end of fermentation. Overexpressing fnr with adhE2 enhanced butanol production compared to only adhE2. This is the first report of overexpressing homologous and heterologous genes in C. carboxidivorans for enhancing alcohols production from syngas and glucose.

Model-based temperature control for improving lactic acid production from glycerol

To maximize the final lactic acid productivity and concentration, temperature control was optimized using a mathematical modelling approach. A kinetic model, including cell growth, product formation and substrate consumption equations, was proposed to describe the lactic acid production process by Escherichia coli AC-521 with glycerol as the substrate. By constructing four functions, the temperature effect was introduced on the fermentation process, where four parameters (X_max, μ_max, Y_ps and β) were observed to be significantly affected by the temperature. For the convenience of application, the temperature control strategies were simplified by dividing the whole fermentation process into several units. In each unit, the temperature was controlled constantly. Based on the model, the optimal temperature for each unit was determined to maximize the final lactate productivity. This temperature control strategy can be effectively applied in batch and fed-batch cultures, and the verified experimental evaluation showed a good correlation with the model data. Under improved temperature control conditions, a maximal lactic acid concentration of 90.4 g L⁻¹ was obtained after 80 h of fed-batch fermentation, giving a productivity of 1.13 g L⁻¹ h⁻¹, which is 1.2 times more than that in the conventional constant temperature during the cultivation course.

With model-based temperature control, yield of lactic acid obtained was higher than that obtained in the conventional process with a constant temperature.

Biochar enhanced ethanol and butanol production by Clostridium carboxidivorans from syngas

Biochar has functional groups, pH buffering capacity and cation exchange capacity (CEC) that can be beneficial in syngas fermentation. This study examined the properties of biochar made from switchgrass (SGBC), forage sorghum (FSBC), red cedar (RCBC) and poultry litter (PLBC), and their effects on ethanol and butanol production from syngas using Clostridium carboxidivorans. Experiments were performed in 250 mL bottle reactors with a 50 mL working volume at 37 °C fed syngas containing CO:H₂:CO₂ (40:30:30 by volume). Results showed that PLBC and SGBC enhanced ethanol production by 90% and 73%, respectively, and butanol production by fourfold compared to standard yeast extract medium without biochar (control). CO and H₂ utilization in PLBC and SGBC media increased compared to control. PLBC had the highest pH buffering capacity, CEC and total amount of cations compared with SGBC, FSBC and RCBC, which could have contributed to its highest enhancement of ethanol and butanol production.