Lignocentric analysis of a carbohydrate-producing lignocellulosic biorefinery process

Achieving high enzymatic hydrolysis sugar yield of sodium hydroxide-pretreated wheat straw with a low cellulase dosage by adding sulfomethylated tannic acid

Sulfonated lignin can significantly enhance the enzymatic hydrolysis of lignocellulose substrates. Lignin is a type of polyphenol, therefore, sulfonated polyphenol, such as tannic acid, is likely to have similar effects. In order to obtain a low-cost and high-efficiency additive to improve enzymatic hydrolysis, sulfomethylated tannic acids (STAs) with different sulfonation degrees were prepared and their impact on enzymatic saccharification of sodium hydroxide-pretreated wheat straw were investigated. Tannic acid strongly inhibited, while STAs strongly promoted the substrate enzymatic digestibility. While adding 0.04 g/g-substrate STA containing 2.4 mmol/g sulfonate group, the glucose yield increased from 60.6% to 97.9% at a low cellulase dosage (5 FPU/g-glucan). The concentration of protein in enzymatic hydrolysate significantly increased with the added STAs, indicating that cellulase preferentially adsorbed with STAs, thereby reducing the amount of cellulase nonproductively anchored on substrate lignin. This result provides a reliable approach for establishing an efficient lignocellulosic enzyme hydrolysis system.

In situ utilization of biomass pretreatment liquor as a novel flocculant for anion dyes removal: Performance and mechanism

In this work, it was first found biomass pretreatment liquor (PL) produced from rice straw (RS) pretreatment with FeCl₃ and polyethylene glycol 400 co-solvent can be used in situ as a new flocculant to remove anionic dyes from wastewater. The removal performance of nine dyes was investigated using various PL doses at different pH values. The experiment indicated that the PL had different flocculation effects on these dyes (color removal efficiency: 42.58-99.84%). Positive color removal results for the dyes were unachievable with six commercial coagulants. Among the nine dyes treated by PL flocculation, the best removal efficiencies for color, turbidity and suspended matter were obtained for Congo red. In the flocculation process, Fe³⁺ plays a role in charge neutralization, lignin nanoparticles (LNP) relies on hydroxyl groups to react instantaneously with the amino groups on the dye, and are bridged together by π-π interactions to promote the formation of floc clusters until they completely settle. Utilization of PL as a flocculant helps pave the way to simultaneously treat waste biomass, waste treatment liquor and dye wastewater. This research is of great significance for future water environment remediation and material development.

Tracing Sweetgum Lignin's Molecular Properties through Biorefinery Processing

Changes to the molecular properties of lignin over the course of biorefinery processing were investigated by using sweetgum as a feedstock. Hydrothermal pretreatment has been used because it is an economically attractive, green process. Three representative biorefinery lignin preparations were obtained, with about 70 % yield based on raw lignin. The three fractions included soluble lignin adsorbed on resin (XADL), solvent-extracted lignin (HTCELp), and an additional ball-milled residual lignin (HTRELp). By comparing the raw and biorefinery lignin preparations, it can be concluded that lignin undergoes both degradation and condensation throughout the various stages of the hydrothermal-based biorefinery process. The two fractions made soluble by biorefinery processing, XADL and HTCELp, were found to be low-molecular-weight degradation products enriched with free phenolic hydroxyl groups. In addition, about 15 % of noncondensed phenolic units were involved in condensation reactions. Quantitative NMR spectroscopy analysis revealed that at least about 28 % of β-O-4' substructures were cleaved. Hibbert's ketones were identified in XADL and HTRELp, which provided evidence of lignin undergoing acidolysis. The contents of β-5' and β-β' did not change significantly upon biorefinery processing. Finally, episyringaresinol was detected in XADL and HTCELp. It is hoped that these findings will help to further demonstrate the specific effects of biorefinery processing on lignin in hardwood and facilitate its utilization to improve biorefinery economics.

Unrevealing model compounds of soil conditioners impacts on the wheat straw autohydrolysis efficiency and enzymatic hydrolysis

BACKGROUND

Soil-derived exogenous ash (EA) poses a challenge toward lignocellulosic autohydrolysis due to its buffering capacity. Previous works focusing on this phenomenon have failed to also investigate the role that soluble salts, and organic matter plays in this system. Herein, sodium phosphate and sodium humate were employed as model buffering compounds representing soluble salts and organic matter and dosed into a de-ashed wheat straw (DWS) autohydrolysis process to show the potential impacts of WS attached soil conditioners on the WS autohydrolysis efficiency which would further affect the enzymatic digestibility of autohydrolyzed WS.

RESULTS

Results showed that with the increasing loadings of sodium phosphate and sodium humate resulted in elevated pH values (from 4.0 to 5.1 and from 4.1 to 4.7, respectively). Meanwhile, the reductions of xylan removal yields from ~ 84.3-61.4% to 72.3-53.0% by loading (1-30 g/L) sodium phosphate and sodium humate during WS autohydrolysis lead to a significant decrease of cellulose accessibilities which finally lead to a reduction of the enzymatic digestibility of autohydrolyzed WS from ~ 75.4-77.2% to 47.3-57.7%.

CONCLUSION

The existence of different types soil conditioner model compounds results in various component fractions from autohydrolyzed WS in the process of autohydrolysis. A lack of sufficient xylan removal was found to drive the significant decrease in enzymatic accessibility. The results demonstrated the various effects of two typical tested soil conditioners on WS autohydrolysis and enzymatic hydrolysis.

Degradation of bamboo lignocellulose by bamboo snout beetle Cyrtotrachelus buqueti in vivo and vitro: efficiency and mechanism

BACKGROUND

As an important biomass raw material, the lignocellulose in bamboo is of significant value in energy conversion. The conversion of bamboo lignocellulose into fermentable reducing sugar, i.e. the degradation of bamboo lignocellulose, is an important step in lignocellulose conversion. However, little research has focussed on excavating the enzymes and microbes that are related to the degradation of bamboo lignocellulose, which is important for its utilisation. This study used Cyrtotrachelus buqueti (bamboo snout beetle) to evaluate the efficiency of bamboo lignocellulose degradation.

RESULTS

RNA sequencing was conducted to sequence the transcriptome of the insect before and after feeding on bamboo shoots. The expression levels of genes encoding several carbohydrate-active enzymes, such as endoglucanase (evgtrinloc27093t1 and evgtrinloc16407t0) and laccase (evgtrinloc15173t0 and evgtrinloc11252t0), were found to be upregulated after feeding. Faecal component analysis showed that the degradation efficiencies of cellulose, hemicellulose and lignin were 61.82%, 87.65% and 69.05%, respectively. After 6 days of co-culture with crude enzymes in vitro, the degradation efficiencies of cellulose, hemicellulose and lignin in bamboo shoot particles (BSPs) were 24.98%, 37.52% and 26.67%, respectively. These results indicated that lignocellulosic enzymes and related enzymes within the insect itself co-degraded bamboo lignocellulose. These finding can potentially be used for the pre-treatment and enzymatic hydrolysis of bamboo lignocellulose.

CONCLUSION

Our results showed that intestinal digestive enzymes from C. buqueti degraded bamboo shoot lignocellulose both in vivo and in vitro. In addition, the expression levels of many carbohydrate-active enzyme (CAZyme) genes were upregulated in the transcriptome, including those for cellulase, xylanase and ligninase genes. Therefore, we proposed a scheme for applying the lignocellulolytic enzymes from C. buqueti to degrade bamboo lignocellulose using genetic, enzymatic and fermentation engineering techniques to overexpress the lignocellulolytic enzymes genes in vitro and obtain large quantities of enzymes that could efficiently degrade bamboo lignocellulose and be used for lignocellulose bioconversion.

Reactivity improvement by phenolation of wheat straw lignin isolated from a biorefinery process

This work describes an effective phenolation process to improve wheat straw biorefinery lignin reactivity.

Use of metal chlorides during waste wheat straw autohydrolysis to overcome the self-buffering effect

High ash content of waste wheat straw (WWS) is resistant to biorefinery autohydrolysis pretreatment due to its self-buffering effects. In this work, minor addition FeCl₃ and AlCl₃ were applied to overcome the self-buffering effects of WWS by cationic occupation of the negatively charged sites present on particulate ash's surface. The results showed that with the increasing concentrations (0-20 mM) of AlCl₃ and FeCl₃, the enzymatic efficiencies of autohydrolyzed WWS were enhanced from 49.7% to 62.1% and 66.6%, respectively. Acid buffer and cation exchange capacity of pretreated WWS were decreased by adding metal chlorides and the reducing results were mainly attributed to cation exchange. Meanwhile, a maximum monosaccharide production (185.3 mg/g-WWS) was achieved with 62.0 mg/g-WWS xylooligosaccharide by using 20 mM FeCl₃ during WWS autohydrolysis. The results demonstrated that the implications of FeCl₃ and AlCl₃ in WWS autohydrolysis were an effective strategy to enhance autohydrolysis efficiency by overcoming self-buffering effects.

Influence of sulfur dioxide-ethanol-water pretreatment on the physicochemical properties and enzymatic digestibility of bamboo residues

SO₂-ethanol-water (SEW) is a promising pretreatment for improving enzymatic digestibility of biomass through simultaneously removing hemicellulose and lignin. In this work, SEW pretreatment was performed at different cooking times (10 min-60 min) and different SO₂ concentrations (0.5%-2%) to produce pretreated bamboo residues for enzymatic hydrolysis. Meanwhile, physicochemical features of the residual cellulose and lignin were analyzed to better understand how SEW improves enzymatic digestibility. Under optimized SEW pretreatment condition (1% SO₂ concentration, 150 °C, 60 min), 81.7% of xylan and 80.3% of lignin were solubilized, along with 89.1% of cellulose preserved in pretreated solid. A good enzymatic digestibility (80.4%) was achieved at optimum SEW condition. Several compelling correlations (R² > 0.7) were observable between enzymatic digestibility and physicochemical features, demonstrating the importance of SEW pretreatment abilities of hemicellulose and lignin removal, reducing cellulose's degree of polymerization, and improving the amount of sulfonyl groups imparted to the original lignin structure.

Improving enzymatic hydrolysis efficiency of wheat straw through sequential autohydrolysis and alkaline post-extraction

In this work, a two-step pretreatment process of wheat straw was established by combining autohydrolysis pretreatment and alkaline post-extraction. The results showed that employing alkaline post-extraction to autohydrolyzed wheat straw could significantly improve its enzymatic hydrolysis efficiency from 36.0% to 83.7%. Alkaline post-extraction lead to the changes of the structure characteristics of autohydrolyzed wheat straw. Associations between enzymatic hydrolysis efficiency and structure characteristics were also studied. The results showed that the factors of structure characteristics such as delignification, xylan removal yield, crystallinity, accessibility and hydrophobicity are positively related to enzymatic hydrolysis efficiency within a certain range for alkaline post-extracted wheat straw. The results demonstrated that autohydrolysis coupled with alkaline post-extraction is an effective and promising method to gain fermentable sugars from biomass.