Expression and characterization of the key enzymes involved in 2-benzoxazolinone degradation by Pigmentiphaga sp. DL-8

Unraveling the mechanisms of benzo[a]pyrene degradation by Pigmentiphaga kullae strain KIT-003 using a multi-omics approach

Polycyclic aromatic hydrocarbons (PAHs), notably benzo[a]pyrene (BaP), are environmental contaminants with multiple adverse ecological implications. Numerous studies have suggested the use of BaP biodegradation using various bacterial strains to remove BaP from the environment. This study investigates the BaP biodegradation capability of Pigmentiphaga kullae strain KIT-003, isolated from the Nak-dong River (South Korea) under specific environmental conditions. The optimum conditions of biodegradation were found to be pH 7.0, 35°C, and a salinity of 0 %. GC-MS analysis suggested alternative pathways by which KIT-003 produced catechol from BaP through several intermediate metabolites, including 4-formylchrysene-5-carboxylic acid, 5,6-dihydro-5,6-dihydroxychrysene-5-carboxylic acid (isomer: 3,4-dihydro-3,4-dihydroxychrysene-4-carboxylic acid), naphthalene-1,2-dicarboxylic acid, and 2-hydroxy-1-naphthoic acid. Proteomic profiles indicated upregulation of enzymes associated with aromatic compound degradation, such as nahAc and nahB, and of those integral to the tricarboxylic acid cycle, reflecting the strain's adaptability to and degradation of BaP. Lipidomic analysis of KIT-003 demonstrated that BaP exposure induced an accumulation of glycerolipids such as diacylglycerol and triacylglycerol, indicating their crucial role in bacterial adaptation mechanisms under BaP stress. This study provides significant scientific knowledge regarding the intricate mechanisms involved in BaP degradation by microorganisms.

Identification and characterization of a fungal cutinase-like enzyme CpCut1 from Cladosporium sp. P7 for polyurethane degradation

Plastic degradation by biological systems emerges as a prospective avenue for addressing the pressing global concern of plastic waste accumulation. The intricate chemical compositions and diverse structural facets inherent to polyurethanes (PU) substantially increase the complexity associated with PU waste management. Despite the extensive research endeavors spanning over decades, most known enzymes exhibit a propensity for hydrolyzing waterborne PU dispersion (i.e., the commercial Impranil DLN-SD), with only a limited capacity for the degradation of bulky PU materials. Here, we report a novel cutinase (CpCut1) derived from Cladosporium sp. P7, which demonstrates remarkable efficiency in the degrading of various polyester-PU materials. After 12-h incubation at 55°C, CpCut1 was capable of degrading 40.5% and 20.6% of thermoplastic PU film and post-consumer foam, respectively, while achieving complete depolymerization of Impranil DLN-SD. Further analysis of the degradation intermediates suggested that the activity of CpCut1 primarily targeted the ester bonds within the PU soft segments. The versatile performance of CpCut1 against a spectrum of polyester-PU materials positions it as a promising candidate for the bio-recycling of waste plastics.IMPORTANCEPolyurethane (PU) has a complex chemical composition that frequently incorporates a variety of additives, which poses significant obstacles to biodegradability and recyclability. Recent advances have unveiled microbial degradation and enzymatic depolymerization as promising waste PU disposal strategies. In this study, we identified a gene encoding a cutinase from the PU-degrading fungus Cladosporium sp. P7, which allowed the expression, purification, and characterization of the recombinant enzyme CpCut1. Furthermore, this study identified the products derived from the CpCut1 catalyzed PU degradation and proposed its underlying mechanism. These findings highlight the potential of this newly discovered fungal cutinase as a remarkably efficient tool in the degradation of PU materials.

Genetic redundancy of 4-hydroxybenzoate 3-hydroxylase genes ensures the catabolic safety of Pigmentiphaga sp. H8 in 3-bromo-4-hydroxybenzoate-contaminated habitats

Genetic redundancy is prevalent in organisms and plays important roles in the evolution of biodiversity and adaptation to environmental perturbation. However, selective advantages of genetic redundancy in overcoming metabolic disturbance due to structural analogues have received little attention. Here, functional divergence of the three 4-hydroxybenzoate 3-hydroxylase (PHBH) genes (phbh1~3) was found in Pigmentiphaga sp. strain H8. The genes phbh1/phbh2 were responsible for 3-bromo-4-hydroxybenzoate (3-Br-4-HB, an anthropogenic pollutant) catabolism, whereas phbh3 was primarily responsible for 4-hydroxybenzoate (4-HB, a natural intermediate of lignin) catabolism. 3-Br-4-HB inhibited 4-HB catabolism by competitively binding PHBH3, and was toxic to strain H8 cells especially at high concentrations. The existence of phbh1/phbh2 not only enabled strain H8 to utilize 3-Br-4-HB, but also ensured the catabolic safety of 4-HB. Molecular docking and site-directed mutagenesis analyses revealed that Val199 and Phe384 of PHBH1/PHBH2 were required for the hydroxylation activity towards 3-Br-4-HB. Phylogenetic analysis indicated that phbh1 and phbh2 originated from a common ancestor and evolved specifically in strain H8 to adapt to 3-Br-4-HB-contaminated habitats, whereas phbh3 evolved independently. This study deepens our understanding of selective advantages of genetic redundancy in prokaryote's metabolic robustness and reveals the factors driving the divergent evolution of redundant genes in adaptation to environmental perturbation. This article is protected by copyright. All rights reserved.

Mass transfer and reaction simultaneously enhanced airlift microbial electrolytic cell system with high gaseous o-xylene removal capacity

To overcome the limitation of mass transfer and reaction rate involved in the biodegradation of gaseous o-xylene, the airlift reactor and microbial electrolysis cell were integrated to construct an airlift microbial electrolysis cell (AL-MEC) system for the first time, in which the bioanode was modified by polypyrrole to further improve biofilm attachment. The developed AL-MEC system achieved 95.4% o-xylene removal efficiency at optimized conditions, and maintained around 75% removal efficiency even while the inlet o-xylene load was as high as 684 g m^-3 h^-1. The existence of O₂ exhibited a competition in electrons with the bioanode but a positive effect on ring-opening process in the o-xylene oxidation. The limitation of mass transfer had been overcome as the empty bed resistance time in the range of 20-80 s did not influence the system performance significantly. The microbial community analysis confirmed the o-xylene degradation microbes and electroactive bacteria were the dominant, which could be further enriched at 0.3 V against standard hydrogen electrode. This work revealed the feasibility of the AL-MEC system for the degradation of o-xylene and similar compounds, and provided insights into bioelectrochemical system design with high gaseous pollution removal capacity.

Allelopathic Plants: Models for Studying Plant-Interkingdom Interactions

Allelopathy is a biochemical interaction between plants in which a donor plant releases secondary metabolites, allelochemicals, that are detrimental to the growth of its neighbours. Traditionally considered as bilateral interactions between two plants, allelopathy has recently emerged as a cross-kingdom process that can influence and be modulated by the other organisms in the plant's environment. Here, we review the current knowledge on plant-interkingdom interactions, with a particular focus on benzoxazinoids. We highlight how allelochemical-producing plants influence not only their plant neighbours but also insects, fungi, and bacteria that live on or around them. We discuss challenges that need to be overcome to study chemical plant-interkingdom interactions, and we propose experimental approaches to address how biotic and chemical processes impact plant health.

Coupling magnetic-nanoparticle mediated isolation (MMI) and stable isotope probing (SIP) for identifying and isolating the active microbes involved in phenanthrene degradation in wastewater with higher resolution and accuracy

Stable isotope probing (SIP) is a cultivation-independent approach identifying the functional microbes in their natural habitats, possibly linking their identities to functions. DNA-SIP is well-established but suffers from the shift of ¹²C-DNA into the heavy DNA (¹³C-DNA) fraction, which significantly reduces the resolution and accuracy. In this study, we coupled magnetic-nanoparticle mediated isolation (MMI) and DNA-SIP, namely MMI-SIP, to identify the active microbes involved in phenanthrene degradation from PAH-contaminated wastewater. Microbes affiliated to Pseudomonas and Sphingobium were responsible for in situ phenanthrene metabolism from the SIP results, and Pigmentiphaga was only unraveled for phenanthrene degradation in the MMI and MMI-SIP microcosms. MMI-SIP also significantly increased the enrichment of the above microbes and genes encoding the alpha subunit of the PAH-ring hydroxylating dioxygenase (PAH-RHD_α) in the heavy DNA fractions. Our findings suggest that MMI-SIP is a powerful tool, with higher resolution and accuracy, to distinguish the active microbes involved in phenanthrene metabolism in the wastewater, provide a more precise map of functional microbial communities, and offer suggestions for effective management for wastewater treatment plants.