Enhanced enzymatic saccharification of sugarcane bagasse pretreated by sodium methoxide with glycerol

Enhancement of sugar release from sugarcane bagasse through NaOH-catalyzed ethylene glycol pretreatment and water-soluble sulfonated lignin

In this work, five different NaOH-catalyzed ethylene glycol (EG) pretreatments together with water-soluble sulfonated lignin (SL) were used for enhancing sugarcane bagasse (SCB) enzymatic digestion. The results showed that the coupling of NaOH and EG into a one-pot pretreatment (10%NaOH/EG) was more beneficial to improve SCB enzymatic hydrolysis than that of single 10%NaOH or EG pretreatment, or the two-step pretreatment of NaOH and EG in different sequence (10%NaOH+EG and EG + 10%NaOH, respectively). The highest glucose yield of this work was 91.2 %, mainly released from the SCB that pretreated with 10%NaOH/EG at 130 °C for 60 min and 72 h enzymatic hydrolysis. The adding of SL into the enzymatic hydrolysis step could significantly lower the cellulase dosage and hydrolysis time from 20 FPU/g and 72 h to 10 FPU/g and 24 h, respectively, meanwhile keeping a high glucose yield of 90.4 %. The characterization of various pretreated or un-pretreated SCB confirmed that the improvement of hydrolysis efficiency of SCB after 10%NaOH/EG pretreatment was closely related to the removal of various components barriers in SCB and the fragmentation of pretreated solid. It can be concluded that the developed NaOH-catalyzed ethylene glycol pretreatment was an efficiency way to enhance the sugar release from SCB.

Glycerol organosolv pretreatment can unlock lignocellulosic biomass for production of fermentable sugars: Present situation and challenges

The complex structure of lignocellulosic biomass forms the recalcitrance to prevent the embedded holo-cellulosic sugars from undergoing the biodegradation. Therefore, a pretreatment is often required for an efficient enzymatic lignocellulosic hydrolysis. Recently, glycerol organosolv (GO) pretreatment is revealed potent in selective deconstruction of various lignocellulosic biomass and effective improvement of enzymatic hydrolysis. Evidently, the GO pretreatment is capable to modify the structure of dissolved components by glycerolysis, i.e., by trans-glycosylation onto glyceryl glycosides and by hydroxylation grafting onto glyceryl lignin. Such modifications tend to protect these main components against excessive degradation, which can be mainly responsible for the obviously less fermentation inhibitors arising in the GO pretreatment. This pretreatment can provide opportunities for valorization of emerging lignocellulosic biorefinery with production of value-added biochemicals. Recent advances in GO pretreatment of lignocellulosic biomass followed by enzymatic hydrolysis are reviewed, and perspectives are made for addressing remaining challenges.

Optimization of Fenton process on removing antibiotic resistance genes from excess sludge by single-factor experiment and response surface methodology

Excess sludge contains large amounts of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs), posing a risk for human health. However, most current studies usually ignored their abundance and removal in excess sludge. Therefore, this study aimed to reduce ARGs/MGEs in sludge by Fenton process, and applied single-factor experiment (SFE) and response surface methodology (RSM) to optimize the Fenton reaction condition for higher removal rates of ARGs/MGEs. The results demonstrated that the removal rates of target genes by SFE optimized condition ranged from 10.91% to 66.86%, while the removal rates caused by RSM optimized condition were 48.02% - 76.36%, indicating RSM was a useful tool to improve the removal rates of ARGs in excess sludge. Additionally, the scanning electron microscope and cell apoptosis results suggested that the Fenton treatment altered the structure of sludge and reduced the numbers of normal cells, thus causing the reductions of target genes.

Effects of Organic Solvents on the Organosolv Pretreatment of Degraded Empty Fruit Bunch for Fractionation and Lignin Removal

Empty fruit bunch (EFB), which is one of the primary agricultural wastes generated from the palm oil plantation, is generally discharged into the open environment or ends up in landfills. The utilization of this EFB waste for other value-added applications such as activated carbon and biofuels remain low, despite extensive research efforts. One of the reasons is that the EFB is highly vulnerable to microbial and fungi degradation under natural environment owning to its inherent characteristic of high organic matter and moisture content. This can rapidly deteriorate its quality and results in poor performance when processed into other products. However, the lignocellulosic components in degraded EFB (DEFB) still largely remain intact. Consequently, it could become a promising feedstock for production of bio-products after suitable pretreatment with organic solvents. In this study, DEFB was subjected to five different types of organic solvents for the pretreatment, including ethanol, ethylene glycol, 2-propanol, acetic acid and acetone. The effects of temperature and residence time were also investigated during the pretreatment. Organosolv pretreatment in ethylene glycol (50 v/v%) with the addition of NaOH (3 v/v%) as an alkaline catalyst successfully detached 81.5 wt.% hemicellulose and 75.1 wt.% lignin. As high as 90.4 wt.% cellulose was also successfully retrieved at mild temperature (80 °C) and short duration (45 min), while the purity of cellulose in treated DEFB was recorded at 84.3%. High-purity lignin was successfully recovered from the pretreatment liquor by using sulfuric acid for precipitation. The amount of recovered lignin from alkaline ethylene glycol liquor was 74.6% at pH 2.0. The high recovery of cellulose and lignin in DEFB by using organosolv pretreatment rendered it as one of the suitable feedstocks to be applied in downstream biorefinery processes. This can be further investigated in more detailed studies in the future.

Vacuum-assisted black liquor-recycling enhances the sugar yield of sugarcane bagasse and decreases water and alkali consumption

Black liquor (BL) remains a critical problem during alkaline pretreatment. To solve this issue, a novel pretreatment strategy termed vacuum-assisted black liquor-recycling pretreatment, was established to pretreat sugarcane bagasse (SCB). Firstly, SCB was pretreated with 2% NaOH at 121 °C for 1 h under vacuum conditions. The produced BL was used for subsequent pretreatments after pH recovery with NaOH. The pretreated SCBs were subject to enzymatic hydrolysis and separate hydrolyzation and fermentation (SHF) without washing to neutral pH. BL was recycled on seven occasions. The results indicated that glucose yields did not significantly differ between pretreatment with NaOH and recovered BL. The enzymatic hydrolysis and the fermentation resulted in maximum 0.35 g/g of glucose yield and 116.5 g/kg of ethanol yield respectively. Compared with conventional pretreatment with NaOH, the VABLR method showed high conversion rates of cellulose into monosaccharaides, whilst preserving ~20% and ~46% of alkali and water usage, respectively.

Mild Acid-Catalyzed Atmospheric Glycerol Organosolv Pretreatment Effectively Improves Enzymatic Hydrolyzability of Lignocellulosic Biomass

Conventional atmospheric glycerol organosolv pretreatment is energy-intensive with the requirement of long time and/or high temperature. Herein, acid-catalyzed atmospheric glycerol organosolv (ac-AGO) pretreatment was developed under a mild condition to modify the sugarcane bagasse structure for improving enzymatic hydrolyzability. Using single factor and central composite design experiments, ac-AGO pretreatment was optimized at 200 °C for 15 min with 0.06% H₂SO₄ addition, wherein the hemicellulose and lignin removal rates were 82 and 52%, respectively, with extremely high cellulose retention of 98%. The ac-AGO-pretreated substrate exhibited good enzymatic hydrolyzability at a modest cellulase loading, affording a 70% glucose yield after 72 h. Multiple analysis tools were used to correlate the hydrolyzability of the substrate with its structural features. The results indicated that the mild ac-AGO pretreatment can modify the lignocellulosic biomass structure to achieve good hydrolyzability, mainly resulting in significant hemicellulose removal.

Pre-treatment of sugarcane bagasse with aqueous ammonia-glycerol mixtures to enhance enzymatic saccharification and recovery of ammonia

In this work, an efficient aqueous ammonia with glycerol (AAWG) method to improve the digestibility of sugarcane bagasse (SCB) was developed. Response surface methodology was utilized to optimize the AAWG parameters to achieve the maximum total fermentable sugar concentration (TFSC) and total fermentable sugar yield (TFSY). Under optimal AAWG conditions, 13.59 g/L TFSC (9.25% ammonia, 1.86 h, 180 °C) and 0.4449 g/g TFSY (9.51% ammonia, 1.78 h, 180 °C) were achieved, with delignification of 77.81% and 70.91%, respectively. Compared to pretreatment with glycerol or aqueous ammonia, the AAWG method significantly enhanced the enzymatic efficiency of SCB. The ammonia was recovered from the pretreatment liquid by distillation, and about one-third of the ammonia was retained. The overall results indicate that AAWG is effectively used as a pretreatment method for recovering ammonia, which would largely contribute to the economic benefits of biomass biorefinery.

Sugarcane Bagasse Hydrolysis Enhancement by Microwave-Assisted Sulfolane Pretreatment

Sugarcane bagasse is the major by-product of the sugarcane industry and, due to its abundant availability, it has been extensively studied for lignocellulosic bioconversion in the production of bioethanol and other value-added commercial products. In the study presented herein, a combined pretreatment using sulfolane, TiO2 and alkali microwave irradiation (MW-A) was assessed for the dissolution of lignin prior to enzymatic saccharification of holocellulose. Total reducing sugars (TRS) and saccharinic acid yields were investigated. The increase in NaOH concentration up to 5% and in temperature from 120 °C to 140 °C were found to have a positive influence on both yields. While increasing the reaction time from 5 to 60 min only led to an increase in TRS yield <2%, a reaction time of 30 min almost doubled the saccharinic acids production. TRS yields and saccharinic acid production were approximately 5% and 33% higher when the sulfolane-TiO2 reaction medium was used, as compared to MW-A in water, reaching up to 64.8% and 15.24 g/L of saccharinic acids, respectively. The proposed MW-A pretreatment may hold promise for industrial applications, given the good TRS yields obtained, and the associated enzyme and time/energy savings. The use of sulfolane-TiO2 reaction medium is encouraged if saccharinic acids are to be recovered too.

Enhancement of fermentative H2 production with peanut shell as supplementary substrate: Effects of acidification and buffer effect

For bio-H₂ fermentation, the progress and H₂ yield were significantly affected by culture pH. Our previous research found peanut shell powder (PSP, as supplementary substrate) having a buffer effect on the fermentative time prolongation and H2 yield enhancement. The acid buffer action (ABA), cation exchange capacity (CEC), scanning electron microscope (SEM) and X-ray powder diffraction (XRD) were employed to explore the mechanism and structure changes of PSP. The superior ABA (57.44 ± 0.65 mmol/pH-kg) and CEC (112 ± 2.0 cmol/kg) of PSP, which provided high specific surface area and amorphous content, prolonged the fermentative time. The acidification of volatile fatty acids on PSP was effective to release reducing sugar and enhance hydrogen yield through breaking hemicellulose and amorphous components of cellulose, and enlarging specific surface area. The results indicated that buffer effect and acidification on PSP made positive effects on prolonging fermentation time and enhancing hydrogen yield.

Miscanthus straw as substrate for biosuccinic acid production: Focusing on pretreatment and downstream processing

The main aim of this study was to optimize pretreatment strategies of Miscanthus × giganteus for biosuccinic acid production. A successful pretreatment with organosolv method (80% w/w of glycerol, 1.25% of H₂SO₄), prevented sugars conversion to furfurals and organic acids, and thereby resulted in high sugar recovery (glucan > 98%, xylan > 91%) and biomass delignification (60%). Pretreated biomass was subjected to hydrolysis with various cellulolytic enzyme cocktails (Viscozyme® L, Carezyme 1000L®, β-Glucanase, Cellic® CTec2, Cellic® HTec2). The most effective enzymes mixture composed of Cellic® CTec2 (10% w/w), β-Glucanase (5% w/w) and Cellic® HTec2 (1% w/w) resulted in high glucose (93.1%) and xylose (69.2%) yields after glycerol-based pretreatment. Succinic acid yield of 75-82% was obtained after hydrolysates fermentation, using Actinobacillus succinogenes 130Z. Finally a successful downstream concept for succinic acid purification was proposed. The succinic acid recovery with high purity (>98%) was developed.

Anticancer Activity of Polysaccharides Produced from Glycerol and Crude Glycerol by an Endophytic Fungus Chaetomium globosum CGMCC 6882 on Human Lung Cancer A549 Cells

Two polysaccharides were produced by Chaetomium globosum CGMCC 6882 from glycerol (GCP-1) and crude glycerol (GCP-2). Chemical characteristics results showed GCP-1 and GCP-2 were similar polysaccharides, but the molecular weights of GCP-1 and GCP-2 were 5.340 × 10⁴ Da and 3.105 × 10⁴ Da, respectively. Viabilities of A549 cells after treatment with GCP-1 and GCP-2 were 49% and 39% compared to the control group. Meanwhile, flow cytometry results indicated that GCP-1 and GCP-2 could induce 17.79% and 24.28% of A549 cells to apoptosis with 200 μg/mL concentration treated for 24 h. RT-PCR results suggested that GCP-1 and GCP-2 could be used as potential and effective apoptosis inducers on A549 cells by increasing BAX, CASPASE-3, CASPASE-9, TIMP-1, TIMP-2 expression and decreasing BCL-2 expression. This research provided an innovative approach to using a byproduct of biodiesel production (crude glycerol) to produce polysaccharides of potential medicinal benefit.